Controlled partial transfer hydrogenation of quinolines by cobalt-amido cooperative catalysis

Base Promoted Hydrogenation of N-Heteroarenes with Ammonia Borane and DMSO

Herein, we report a sodium tert-butoxide-promoted reduction of N-heteroarenes using ammonia borane and dimethyl sulfoxide (DMSO) under mild reaction conditions. This method demonstrates broad functional group compatibility across diverse N-heteroarene substrates. Notably, substituting DMSO with deuterated DMSO-d6 enables the synthesis of C3-deuterated 1,2,3,4-tetrahydroquinolines with remarkable positional selectivity. Mechanistic investigations indicate that the protons are derived from both ammonia borane and DMSO. This strategy establishes a novel and environmentally benign approach for the synthesis of (deuterated) N-heterocycles, offering practical advantages in terms of operational simplicity and sustainable reaction conditions.

Development of a Highly Selective Synthesis of 4-Substituted Tetrahydroquinolines: Substrate Scope and Mechanistic Study

Herein, we describe a general and selective deprotonation functionalization reaction of tetrahydroquinolines at the 4-position using organolithiums and phosphoramide ligands. In addition to the development of a direct deprotonation alkylation reaction with primary and secondary alkyl halides, a Negishi cross-coupling protocol was realized to afford products with a range of aromatic halides. These methods were applied to the late-stage installation of tetrahydroquinolines into a variety of substrates including pharmaceuticals as well as natural product analogues. The use of thorough mechanistic investigations revealed the aggregation state of the newly formed tetrahydroquinoline anion to be a separated ion pair, which proved critical to optimizing the reaction conditions.

Electricity-driven organic hydrogenation using water as the hydrogen source

Hydrogenation is a pivotal process in organic synthesis and various catalytic strategies have been developed in achieving effective hydrogenation of diverse substrates. Despite the competence of these methods, the predominant reliance on molecular hydrogen (H2) gas under high temperature and elevated pressure presents operational challenges. Other alternative hydrogen sources such as inorganic hydrides and organic acids are often prohibitively expensive, limiting their practical utility on a large scale. In contrast, employing water as a hydrogen source for organic hydrogenation presents an attractive and sustainable alternative, promising to overcome the drawbacks associated with traditional hydrogen sources. Integrated with electricity as the sole driving force under ambient conditions, hydrogenation using water as the sole hydrogen source aligns well with the environmental sustainability goals but also offers a safer and potentially more cost-effective solution. This article starts with the discussion on the inherent advantages and limitations of conventional hydrogen sources compared to water in hydrogenation reactions, followed by the introduction of representative electrocatalytic systems that successfully utilize water as the hydrogen source in realizing a large number of organic hydrogenation transformations, with a focus on heterogeneous electrocatalysts. In summary, transitioning to water as a hydrogen source in organic hydrogenation represents a promising direction for sustainable chemistry. In particular, by exploring and optimizing electrocatalytic hydrogenation systems, the chemical industry can reduce its reliance on hazardous and expensive hydrogen sources, paving the way for safer, greener, and less energy-intensive hydrogenation processes.

Manganese catalysed reduction of nitriles with amine boranes

The room temperature reduction of various nitriles using amine boranes (ABs) catalysed by a manganese(i) alkyl complex is described. Based on experimental findings, a plausible mechanistic scenario is presented. This includes the presence of two catalytic cycles, one for productive reduction of nitriles and one for hydrogen evolution.

Co(II)-Catalyzed Additive-Free Transfer Hydrogenation of N-Heteroarenes at Room Temperature

Traditional catalyst development relies on multistep synthesis and isolation of ligand and precatalyst. Designing a catalytic system that can be assembled in situ from easily accessible starting materials can decrease the reaction complexity and enhance the synthetic utility. Herein, we report an inexpensive and commercially available CoBr2·H2O/terpyridine-catalyzed effective and straightforward transfer hydrogenation (TH) protocol for N-heteroarenes, utilizing NH3·BH3 (AB) under ambient conditions. Synthesis of diverse substrates and bioactive molecules demonstrated a practical applicability. Control experiments and DFT studies elucidate the mechanism.

Methyl Formate, an Alternative Transfer Hydrogenating Agent for Chemoselective Reduction of N-Heteroarenes and Azoarenes

The search for efficient molecular hydrogen precursors and their catalytic exploration is necessary for the evolution of catalytic transfer hydrogenation. Methyl formate (MF) having high hydrogen content still remains unexplored for such transformations. Herein, we disclosed a bifunctional Ir(III)-complex catalyzed chemoselective TH protocol for N-heteroarenes and azoarenes using MF. A variety of substrates including ten bioactive molecules have been synthesized under mild reaction conditions. A probable mechanistic pathway was proposed based on control experiments and mechanistic studies.

Electrochemical hydrogenation and oxidation of organic species involving water

Fossil fuel-driven thermochemical hydrogenation and oxidation using high-pressure H2 and O2 are still popular but energy-intensive CO2-emitting processes. At present, developing renewable energy-powered electrochemical technologies, especially those using clean, safe and easy-to-handle reducing agents and oxidants for organic hydrogenation and oxidation reactions, is urgently needed. Water is an ideal carrier of hydrogen and oxygen. Electrochemistry provides a powerful route to drive water splitting under ambient conditions. Thus, electrochemical hydrogenation and oxidation transformations involving water as the hydrogen source and oxidant, respectively, have been developed to be mild and efficient tools to synthesize organic hydrogenated and oxidized products. In this Review, we highlight the advances in water-participating electrochemical hydrogenation and oxidation reactions of representative organic molecules. Typical electrode materials, performance metrics and key characterization techniques are firstly introduced. General electrocatalyst design principles and controlling the microenvironment for promoting hydrogenation and oxygenation reactions involving water are summarized. Furthermore, paired hydrogenation and oxidation reactions are briefly introduced before finally discussing the challenges and future opportunities of this research field.

Facile Transfer Hydrogenation of N-Heteroarenes and Nitroarenes Using Magnetically Recoverable Pd@SPIONs Catalyst

Catalysts with active, selective, and reusable features are desirable for sustainable development. The present investigation involved the synthesis and characterization of bear-surfaced ultrasmall Pd particles (<1 nm) loaded onto the surface of magnetic nanoparticles (8-10 nm). The amount of Pd loading onto the surface of magnetite is recorded as 2.8 wt %. The characterization process covered the utilization of scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), inductively coupled plasma (ICP), and X-ray photoelectron spectroscopy (XPS) methods. The Pd@Fe3O4 catalyst has shown remarkable efficacy in the hydrogenation of quinoline, resulting in the production of >99% N-ring hydrogenated (py-THQ) product. Additionally, the catalyst facilitated the conversion of nitroarenes into their corresponding aniline derivatives, where hydrogen was achieved by H2O molecules with the aid of tetrahydroxydiboron (THDB) as an equilibrium supportive at 80 °C in 1 h. The high efficiency of a transfer hydrogenation catalyst is closely related to the metal-support synergistic effect. The broader scope of functional group tolerance is evaluated. The potential mechanism underlying the hydrogenation process has been elucidated through the utilization of isotopic labeling investigations. The application of the heterocyclic compound hydrogenation reaction is extended to formulate the medicinally important tubular polymerization inhibitor drug synthesis. The investigation of the recyclability of Pd@Fe3O4 has been conducted.

Synthesis and biological profile of 2,3-dihydro[1,3]thiazolo[4,5-b]pyridines, a novel class of acyl-ACP thioesterase inhibitors

The present work covers novel herbicidal lead structures that contain a 2,3-dihydro[1,3]thiazolo[4,5-b]pyridine scaffold as structural key feature carrying a substituted phenyl side chain. These new compounds show good acyl-ACP thioesterase inhibition in line with strong herbicidal activity against commercially important weeds in broadacre crops, e.g., wheat and corn. The desired substituted 2,3-dihydro[1,3]thiazolo[4,5-b]pyridines were prepared via an optimized BH3-mediated reduction involving tris(pentafluorophenyl)borane as a strong Lewis acid. Remarkably, greenhouse trials showed that some of the target compounds outlined herein display promising control of grass weed species in preemergence application, combined with a dose response window that enables partial selectivity in certain crops.

Recent Strategies in the Nucleophilic Dearomatization of Pyridines, Quinolines, and Isoquinolines

Dearomatization reactions have become fundamental chemical transformations in organic synthesis since they allow for the generation of three-dimensional complexity from two-dimensional precursors, bridging arene feedstocks with alicyclic structures. When those processes are applied to pyridines, quinolines, and isoquinolines, partially or fully saturated nitrogen heterocycles are formed, which are among the most significant structural components of pharmaceuticals and natural products. The inherent challenge of those transformations lies in the low reactivity of heteroaromatic substrates, which makes the dearomatization process thermodynamically unfavorable. Usually, connecting the dearomatization event to the irreversible formation of a strong C-C, C-H, or C-heteroatom bond compensates the energy required to disrupt the aromaticity. This aromaticity breakup normally results in a 1,2- or 1,4-functionalization of the heterocycle. Moreover, the combination of these dearomatization processes with subsequent transformations in tandem or stepwise protocols allows for multiple heterocycle functionalizations, giving access to complex molecular skeletons. The aim of this review, which covers the period from 2016 to 2022, is to update the state of the art of nucleophilic dearomatizations of pyridines, quinolines, and isoquinolines, showing the extraordinary ability of the dearomative methodology in organic synthesis and indicating their limitations and future trends.

Transfer Hydrogenation of N- and O-Containing Heterocycles Including Pyridines with H3N-BH3 Under the Catalysis of the Homogeneous Ruthenium Precatalyst

In this study, we report a transfer hydrogenation protocol that utilizes borane-ammonia (H3N-BH3) as the hydrogen source and a commercially available RuCl3·xH2O precatalyst for the selective aromatic reduction of quinolines, quinoxalines, pyridines, pyrazines, indoles, benzofurans, and furan derivatives to form the corresponding alicyclic heterocycles in good to excellent isolated yields. Applications of this straightforward protocol include the efficient preparation of useful key pharmaceutical intermediates, such as donepezil and flumequine, including a biologically active compound.

Two-Dimensional Porphyrinic Metal-Organic Framework Composites as a Photocatalytic Platform for Chemoselective Hydrogenation

Chemoselective hydrogenation with high efficiency under ambient conditions remains a great challenge. Herein, an efficient photocatalyst, the 2D porphyrin metal-organic framework composite AmPy/Pd-PPF-1(Cu), featuring AmPy (1-aminopyrene) sitting axially on a paddle-wheel unit, has been rationally fabricated. The 2D AmPy/Pd-PPF-1(Cu) composite acts as a photocatalytic platform, promoting the selective hydrogenation of quinolines to tetrahydroquinolines with a yield up to 99%, in which ammonia borane serves as the hydrogen donor. The AmPy molecules coordinated on a 2D MOF not only enhance the light absorption capacity but also adjust the layer spacing without affecting the network structure of 2D Pd-PPF-1(Cu) nanosheets. Through deuterium-labeling experiments, in situ X-ray photoelectron spectroscopy, electron paramagnetic resonance studies, and density functional theory calculations, it is disclosed that Cu paddle-wheel units in 2D AmPy/Pd-PPF-1(Cu) nanosheets behave as the active site for transfer hydrogenation, and metalloporphyrin ligand and axial aminopyrene molecules can enhance the light absorption capacity and excite photogenerated electrons to Cu paddle-wheel units, assisting in photocatalysis.

Unexpected Redox Chemistry of P∩N- and As∩N-Rhenium(I) Tricarbonyl Complexes in the Presence of CO2 Acting as an Acid

This study reports on Re tricarbonyl complexes bearing 8-(diphenylphosphanyl)quinoline, P∩N, and 8-(diphenylarsanyl)quinoline, As∩N, as bidendate ligands. We studied the reactivity of these complexes in comparison with fac-Re(N∩N)(CO)3Cl (with N∩N = 2,2'-bipyridine or 4,4'-dimethyl-2,2'-bipyridine). We used a combination of electrochemical and spectroelectrochemical methods with time-resolved spectroscopy over 10 orders of magnitude (100 ps-1 s) to investigate the peculiar reactivity of one-electron-reduced Re(CO)3(P∩N)Cl and Re(CO)3(As∩N)Cl complexes also in the presence of protons.

Synthesis and catalytic activity of well-defined Co(I) complexes based on NHC-phosphane pincer ligands

A new methodology for the preparation of Co(I)-NHC (NHC = N-heterocyclic carbene) complexes, namely, [Co(PCNHCP)(CO)2][Co(CO)4] (1) and [Co(PCNHCP)(CO)2]BF4 (2), has been developed (PCNHCP = 1,3-bis(2-(diphenylphosphanyl)ethyl)-imidazol-2-ylidene). Both complexes can be straightforwardly prepared by direct reaction of their parent imidazolium salts with the Co(0) complex Co2(CO)8. Complex 1 efficiently catalyses the reductive amination of furfural and levulinic acid employing silanes as reducing agents under mild conditions. Furfural has been converted into a variety of secondary and tertiary amines employing dimethyl carbonate as the solvent, while levulinic acid has been converted into pyrrolidines under solventless conditions. Dehydrocoupling of the silane to give polysilanes has been observed to occur as a side reaction of the hydrosilylation process.

Designed Nanomaterials for Electrocatalytic Organic Hydrogenation Using Water as the Hydrogen Source

ConspectusThe hydrogenation reaction is one of the most frequently used transformations in organic synthesis. Electrocatalytic hydrogenation by using water (H₂O) as the hydrogen source offers an efficient and sustainable approach to synthesize hydrogenated products under ambient conditions. Such a technique can avoid the use of high-pressure and flammable hydrogen gas or other toxic/expensive hydrogen donors, which usually cause environmental, safety, and cost concerns. Interestingly, utilizing easily available heavy water (D₂O) for deuterated syntheses is also attractive due to the widespread applications of deuterated molecules in organic synthesis and the pharmaceutical industry. Despite impressive achievements, electrode selection mainly relies on trial-and-error modes, and how electrodes dictate reaction outcomes remains elusive. Therefore, the rational design of nanostructured electrodes for driving the electrocatalytic hydrogenation of a series of organics via H₂O electrolysis is developed.In this Account, we review recent advances in the electrocatalytic hydrogenation of different types of organic functional groups, including C≡C, C≡N, C═C, C═O, and C-Br/I bonds, -NO₂, and N-heterocycles, with H₂O over nanostructured cathodes. First, the general reaction steps (reactant/intermediate adsorption, active atomic hydrogen (H*) formation, surface hydrogenation reaction, product desorption) are analyzed, and key factors are proposed to optimize hydrogenation performance (e.g., selectivity, activity, Faradaic efficiency (FE), reaction rate, and productivity) and inhibit side reactions. Then, ex situ and in situ spectroscopic tools to study key intermediates and interpret mechanisms are introduced. Third, based on the knowledge of key reaction steps and mechanisms, we introduce catalyst design principles in detail on how to optimize the adoption of reactants and key intermediates, promote the formation of H* from water electrolysis, inhibit hydrogen evolution and side reactions, and improve the selectivity, reaction rate, FEs, and space-time productivity of products. We then introduce some typical examples. (i) P- and S-modified Pd can decrease C═C adsorption and promote H* formation, enabling semihydrogenation of alkynes with high selectivity and FEs at lower potentials. Then, creating high-curvature nanotips to concentrate the substrates further speeds up the hydrogenation process. (ii) By introducing low-coordination sites into Fe and combining low-coordination sites and surface fluorine to modify Co to optimize the adsorption of intermediates and facilitate H* formation, hydrogenation of nitriles and N-heterocycles with high activity and selectivity is obtained. (iii) By forming isolated Pd sites to induce a specific σ-alkynyl adsorption of alkynes and steering S vacancies of Co₃S_4-x to preferentially adsorb -NO₂, hydrogenation of easily reduced group-decorated alkynes and nitroarenes with high chemoselectivity is realized. (iv) For gas reactant participated reactions, by designing hydrophobic gas diffusion layer-supported ultrasmall Cu nanoparticles to enhance mass transfer, improve H₂O activation, inhibit H₂ formation, and decrease ethylene adsorption, ampere-level ethylene production with a 97.7% FE is accomplished. Finally, we provide an outlook on the current challenges and promising opportunities in this area. We believe that the electrode selection principles summarized here provide a paradigm for designing highly active and selective nanomaterials to achieve electrocatalytic hydrogenation and other organic transformations with fascinating performances.

Hydrido-Cobalt Complexes for the Chemo- and Regioselective 1,2-Silylative Dearomatization of N-Heteroarenes

We describe an efficient regio- and chemoselective dearomatization of N-heteroarenes using hydrido-cobalt catalysts. Reactions were performed under mild conditions on a wide range of N-heteroarenes leading exclusively to the silyl-1,2-dihydroheteroarene. Various quinolines and pyridines bearing electron-donating and electron-withdrawing substituents are compatible with this methodology. DFT calculations, NMR spectroscopic studies, and X-ray diffraction analysis underlined the importance of a second silane for the final step of the reaction.

Intermediates, Isolation and Mechanistic Insights into Zinc Hydride-Catalyzed 1,2-Regioselective Hydrofunctionalization of N-Heteroarenes

The conjugated bis-guanidinate-supported zinc hydride [{LZnH}₂; L = {(ArHN) (ArN)-C═N-C═(NAr) (NHAr); Ar = 2,6-Et₂-C₆H₃}] (I)-catalyzed highly demanding exclusive 1,2-regioselective hydroboration and hydrosilylation of N-heteroarenes is demonstrated with excellent yields. This protocol is compatible with many pyridines and N-heteroarene derivatives, including electron-donating and -withdrawing substituents. Catalytic intermediates, such as [(LZnH) (4-methylpyridine)] IIA, [(L'ZnH) (4-methylpyridine) IIA', where L' = CH{(CMe) (2,6-Et₂C₆H₃N)}₂)], LZn(1,2-DhiQ) (isoquinoline) III, [L'Zn(1,2-DhiQ) (isoquinoline)] III', and LZn(1,2-(3-MeDHQ)) (3-methylquinoline) V, were isolated and thoroughly characterized by NMR, HRMS, and IR analyses. Furthermore, X-ray single-crystal diffraction studies confirmed the molecular structures of compounds IIA', III, and III'. The NMR data proved that the intermediate III or III' reacted with HBpin and gave a selective 1,2-addition hydroborated product. Stoichiometric experiments suggest that V and III independently reacted with silane, yielding selective 1,2-addition of mono- and bis-hydrosilylated products, respectively. Based on the isolation of intermediates and a series of stoichiometric experiments, plausible catalytic cycles were established. Furthermore, the intermolecular chemoselective hydroboration reaction over other reducible functionalities was studied.

Spin-state crossover in photo-catalyzed nitrile dihydroboration via Mn-thiolate cooperation

The role of S-donors in ligand-assisted catalysis using first-row metals has not been broadly investigated. Herein is described a combined experimental and computational mechanistic study of the dihydroboration of nitriles with pinacolborane (HBpin) catalyzed by the Mn(i) complex, Mn(κ3-SMeNS)(CO)3, that features thioether, imine, and thiolate donors. Mechanistic studies revealed that catalysis requires the presence of UV light to enter and remain in the catalytic cycle and evidence is presented for loss of two CO ligands. Stoichiometric reactions showed that HBpin reduces the imine N[double bond, length as m-dash]C of the ligand backbone in the absence of nitrile, forming an inactive off-cycle by-product. DFT calculations showed that the bifunctional thiolate donor, coordinative flexibility of the SMeNS ligand, and access to an open-shell intermediate are all crucuial to accessing low-energy intermediates during catalysis.

Electrocatalytic hydrogenation of quinolines with water over a fluorine-modified cobalt catalyst

Room temperature and selective hydrogenation of quinolines to 1,2,3,4-tetrahydroquinolines using a safe and clean hydrogen donor catalyzed by cost-effective materials is significant yet challenging because of the difficult activation of quinolines and H₂. Here, a fluorine-modified cobalt catalyst is synthesized via electroreduction of a Co(OH)F precursor that exhibits high activity for electrocatalytic hydrogenation of quinolines by using H₂O as the hydrogen source to produce 1,2,3,4-tetrahydroquinolines with up to 99% selectivity and 94% isolated yield under ambient conditions. Fluorine surface-sites are shown to enhance the adsorption of quinolines and promote water activation to produce active atomic hydrogen (H*) by forming F⁻-K⁺(H₂O)₇ networks. A 1,4/2,3-addition pathway involving H* is proposed through combining experimental and theoretical results. Wide substrate scopes, scalable synthesis of bioactive precursors, facile preparation of deuterated analogues, and the paired synthesis of 1,2,3,4-tetrahydroquinoline and industrially important adiponitrile at a low voltage highlight the promising applications of this methodology.

Selective hydrogenation of quinolines with easy-to-handle hydrogen donors and cost-effective catalysts is desirable. Here electrocatalytic quinoline hydrogenation to 1,2,3,4-tetrahydroquinolines is reported with water over a fluorine-modified cobalt.

Unraveling hydridic-to-protonic dihydrogen bond predominance in monohydrated dodecaborate clusters

Hydridic-to-protonic dihydrogen bonds (DHBs) are involved in comprehensive structural and energetic evolution, and significantly affect reactivity and selectivity in solution and solid states. Grand challenges exist in understanding DHBs' bonding nature and strength, and how to harness DHBs. Herein we launched a combined photoelectron spectroscopy and multiscale theoretical investigation using monohydrated closo-dodecaborate clusters B12X12 2-·H2O (X = H, F, I) to address such challenges. For the first time, a consistent and unambiguous picture is unraveled demonstrating that B-H⋯H-O DHBs are superior to the conventional B-X⋯H-O HBs, being 1.15 and 4.61 kcal mol-1 stronger than those with X = F and I, respectively. Energy decomposition analyses reveal that induction and dispersion terms make pronounced contributions resulting in a stronger B-H⋯H-O DHB. These findings call out more attention to the prominent roles of DHBs in water environments and pave the way for efficient and eco-friendly catalytic dihydrogen production based on optimized hydridic-to-protonic interactions.

Facile Transformations of a Binuclear Cp*Co(II) Diamidonaphthalene Complex to Mixed-Valent Co(II)Co(III), Co(III)(μ-H)Co(III), and Co(III)(μ-OH)Co(III) Derivatives

A diamido-bridged dicobalt complex supported by a diamidonaphthalene ligand, Cp*₂Co₂(μ-1,8-C₁₀H₈(NH)₂) (1), was synthesized, and the reactivity relevant to redox transformations of the Co₂N₂ core was investigated. It was found that the Co(II)-Co(II) bond allows for protonation by [HPPh₃][BF₄] resulting in a bridging hydride, [1H]⁺, with pK_a ∼ 7.6 in CH₂Cl₂. The diamidonaphthalene ligand can stabilize the binuclear system in the Co(II)Co(III) mixed-valent state (1⁺), which is capable of binding CO to afford [1-CO]⁺. Surprisingly, the mixed-valent complex also activates H₂O to furnish a Co(III)Co(III) hydroxy complex [1-OH]⁺ accompanied by release of H₂. The hydroxy ligand in [1-OH]⁺ is exchangeable, as demonstrated by ¹⁸O-labeling experiments on [1-OH]⁺ with H₂¹⁸O that led to the heavier isotopolog [1-¹⁸OH]⁺.

HFIP as Protonation Reagent and Solvent for Regioselective Alkylation of Indoles with All-Carbon Centers

The regio- and chemoselective construction of indole bearing an all-carbon center at the C3-position, a versatile bioactive building block, by C(sp²)-C(sp³) formation with olefins has been achieved through utilization of hexafluoroisopropanol (HFIP) as the protonation reagent and solvent. The catalytic reactions are operationally simple and green compared with previous reports utilizing elaborated olefins and catalysts. This protocol allows for alkylation of a variety of substituted indoles with diverse of styrene type alkenes in excellent yields and with high selectivity. Application of this protocol to the synthesis of drug was pursued and with an improved yield in contrast to previous art. Catalytic kinetics and deuterium-labeling experiments suggest that the rate-determining step involves the protonation of olefin by HFIP to generate carbocation, followed by electrophilic addition to indole derivative.

Catalytic and mechanistic studies of a highly active and E-selective Co(II) PNNH pincer catalyst system for transfer-semihydrogenation of internal alkynes

Herein we report the application of a Co(II) PNNH pincer catalyst system (PNNH = 2-(5-(t-butyl)-1H-pyrazol-3-yl)-6-(dialkylphosphinomethyl)pyridine) for the highly E-selective transfer semihydrogenation of internal diaryl alkynes using methanol and ammonia borane...

Same ligand, three first-row metals: comparing M-amido bifunctional reactivity (Mn, Fe, Co)

The bifunctional reactivity of three metal SNS (bis)amido complexes was computationally assessed by comparing the nucleophilicity of the M-N_amido donor (Mn, Fe, Co). Hirshfeld charges identified the Mn-N_amido donor as most nucleophilic and Fe as most electrophilic metal. Reaction energy profiles of a model bifunctional H₂ activation showed Mn with the lowest reaction barrier (17 kcal mol^-1), followed by Fe and Co (21 and 29 kcal mol^-1).

Encapsulating Cobalt into N-Doping Hollow Frameworks for Efficient Cascade Catalysis

The development of nonprecious catalysts for hydrogenation of organic molecules is of great importance in heterogeneous catalysis. Herein, we report a series of N-doped hollow carbon frameworks encompassing cobalt nanoparticles (denoted as Co@NHF-900) constructed as a new kind of reusable catalyst for this purpose by pyrolysis of ZIF-8@Co-dopamine under Ar atmospheres. Notably, the framework of ZIF-8 is essential for efficient catalyst by providing a carbon framework to support Co-dopamine. The experimental results reveal that the ZIF-8 renders a large hollow place within the catalysts, allowing the enrichment of the substrate and windows of the hollow structure and the ease of mass transfer of products during the reaction. All of the virtues made Co@NHF-900 a good candidate for hydrogenation of quinolines with high activity (TOF value of 119 h^-1, which is several times than that of akin catalysts) and chemoselectivity.

Dehydrogenation of iron amido-borane and resaturation of the imino-borane complex

We report on the first isolation and structural characterization of an iron phosphinoimino-borane complex Cp*Fe(η²-H₂B Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> NC₆H₄PPh₂) by dehydrogenation of iron amido-borane precursor Cp*Fe(η¹-H₃B–NHC₆H₄PPh₂). Significantly, regeneration of the amido-borane complex has been realized by protonation of the iron(ii) imino-borane to the amino-borane intermediate [Cp*Fe(η²-H₂B–NHC₆H₄PPh₂)]⁺ followed by hydride transfer. These new iron species are efficient catalysts for 1,2-selective transfer hydrogenation of quinolines with ammonia borane.

Dehydrogenation of an amido-borane iron complex provides an imino-borane complex. Regeneration of the amido-borane precursor was achieved by protonation of the imino-borane followed by hydride transfer to the amino-borane intermediate.

Zirconium-hydride-catalyzed transfer hydrogenation of quinolines and indoles with ammonia borane

Herein, by applying zirconium-hydride complex as the catalyst, the transfer hydrogenation of quinoline and indole derivatives with ammonia borane as a proton and hydride source is achieved.

1,2-Hydroboration of Pyridines by Organomagnesium

Hydroboration of pyridine derivatives at room temperature with earth-abundant and biocompatible magnesium catalysts ligated by phosphinimino amides is developed. Fine turnover frequency (TOF) and distinguished 1,2-regioselectivity have been achieved. The exclusive chemoselective carbonyl hydroboration happens with competitive TOF. A HBpin assisted mechanism is deduced by the reaction rate law, activation parameters, and kinetic isotope effect (KIE) in combination with DFT calculations. To our knowledge, this is the first example of pyridine 1,2-dearomatization by Mg-based catalysts.