Reductive cyanation of organic chlorides using CO2 and NH3 via Triphos-Ni(I) species

High-throughput Experimentation Enables the Development of a Nickel-catalyzed Cyanation Platform for (Hetero)aryl Halides

A novel screening platform for the nickel-catalyzed cyanation of (hetero)aryl halides relying on the use of air-stable Ni(COD)DQ at low loading is reported. Through high-throughput experimentation (HTE), various ligand and solvent combinations are systematically explored, allowing the fast identification of suitable conditions. This standardized workflow serves as an excellent starting point for selecting other competent nickel precatalysts and for further optimization of reluctant substrates. The transformation exhibits broad functional group tolerance and can be readily scaled up to gram-scale.

Distinct Fermi Resonance Patterns of Weak Coupling in 2D-IR Spectra of 5-Cyanoindole Revealed by Isotope Labeling

Fermi resonance is a common phenomenon, and a hidden caveat exists in the applications of infrared probes, causing spectral complication and shorter vibrational lifetime. In this work, using the cyanotryptophan (CNTrp) side chain model compound 5-cyanoindole (CN-5CNI), we performed Fourier transform infrared spectroscopy (FTIR) and two-dimensional infrared (2D-IR) spectroscopy on unlabeled 12C14N-5CNI and its isotopically labeled substituents (12C15N-5CNI, 13C14N-5CNI, 13C15N-5CNI) and demonstrated the existence of Fermi resonance in 5CNI. By constructing the Hamiltonian and simulating 2D-IR spectra, we show that the distinct Fermi resonance 2D-IR patterns in various isotope substituents are determined by the quantum mixing consequences at the v = 1 state, as well as the v = 2 state, where the Fermi coupling and anharmonicity play a crucial role. Our work provides important insights into the elusive type of Fermi resonance, where the coupling is much smaller than the anharmonicity, which is termed the weak coupling case.

Palladium Catalyzed Cyanation of Diaryl Sulfoxides

Aryl nitriles are highly versatile and useful compounds. A palladium-catalyzed cyanation of diaryl sulfoxides using bench-stable Zn(CN)2 as the cyanating reagent has been developed. The reaction proceeded well using Pd(OAc)2 as the catalyst with the inexpensive ligand PCy3 in the presence of t-BuONa. The method has a broad scope of substrates and is scalable. The regioselective cyanation of unsymmetrical diaryl sulfoxides was observed at the side of electron-deficient and more steric hindered aryl groups.

Metal-Free Cyanation of gem-Difluoroalkenes via Azide-Mediated C-C Double Bond Fragmentation

Activation and cleavage of C-C double bonds are long-standing challenges in synthetic chemistry. Herein, we report an unprecedented azide-mediated C-C double bond fragmentation of gem-difluoroalkenes under mild and metal-free conditions, enabling the efficient synthesis of structurally diverse aromatic nitriles in moderate to good yields. This protocol is also amenable to the cyanation of gem-dichloro and dibromo alkenes. This reaction features simple operation and good functional group compatibility and can be implemented at a gram scale.

Palladium-Catalyzed Denitrative Synthesis of Aryl Nitriles from Nitroarenes and Organocyanides

A denitrative cyanation of nitroarenes using organocyanides and a palladium catalyst was developed. The key for this reaction was the utilization of an aminoacetonitrile as a cyano source to avoid the generation of stoichiometric metal- and halogen-containing chemical waste. A wide range of nitroarenes, including heteroarenes and pharmaceutical molecules, can be converted into aryl nitriles.

Synthesis of Enamines, Aldehydes, and Nitriles from CO2: Scope of the One-Pot Strategy via Formamides

Tetrabutylammonium acetate (TBAA) and Cu(OAc)2 worked as a binary catalytic system for the solvent-free N-formylation of amines with CO2 and PhSiH3. This catalysis making C-H and C-N bonds with CO2 was coupled with the C-C bond-forming reactions to achieve the one-pot synthesis of enamines, aldehydes, and nitriles. The X-ray crystal structure of a Cu(OAc)2-TBAA complex was also revealed.

Nickel(I)-Phenolate Complexes: The Key to Well-Defined Ni(I) Species

Phosphine-stabilized monovalent nickel complexes play an important role in catalysis, either as catalytically active species or as decomposition products. Most routes to access these complexes are highly ligand specific or rely on strong reducing agents. Our group recently disclosed a path to access nickel(I)-phenolate complexes from bis(1,5-cyclooctadiene)nickel(0) (Ni(cod)2). Herein, we demonstrate this protocol's broad applicability by ligating a wide range of mono- and bidentate phosphine ligands. We further show the versatility of the phenolate fragment as a precursor to nickel(I)-alkyl or aryl species, which are relevant to Ni catalysis or synthetically useful nickel(I)-chloride and hydride complexes. We also demonstrate that the chloride complex can be synthesized in a one-pot procedure starting from Ni(cod)2 in good yield, making this protocol a valuable alternative to current procedures. Single-crystal X-ray diffraction, IR, and EPR (or NMR) spectroscopy were employed to characterize all of the synthesized nickel complexes.

Boron-Assisted Cobalt-Catalyzed C-H Methylation Using CO2 and H2

C-H methylation of heteroarenes (e.g., indoles, pyrroles, etc.) is frequently applied in the synthesis of drug/biorelated compounds. We herein report the use of CO2/H2 as a methylation reagent for selective C-H methylation of indoles and pyrroles in the presence of cobalt/B(C6F5)3 cocatalysts. The Lewis acidic additive B(C6F5)3 is essential to achieving good reactivity for a broad scope of substituted indoles and pyrroles (20 examples, up to 92% yields). The C-H methylation is accomplished via the CO2 reduction/C-C bond formation/reduction sequence. Water is the only byproduct. This system based on the use of non-noble metal catalysts features an environmentally benign alternative for C-H methylation.

Highly-twisted states of light from a high quality factor photonic crystal ring

Twisted light with orbital angular momentum (OAM) has been extensively studied for applications in quantum and classical communications, microscopy, and optical micromanipulation. Ejecting high angular momentum states of a whispering gallery mode (WGM) microresonator through a grating-assisted mechanism provides a scalable, chip-integrated solution for OAM generation. However, demonstrated OAM microresonators have exhibited a much lower quality factor (Q) than conventional WGM resonators (by >100×), and an understanding of the limits on Q has been lacking. This is crucial given the importance of Q in enhancing light-matter interactions. Moreover, though high-OAM states are often desirable, the limits on what is achievable in a microresonator are not well understood. Here, we provide insight on these two questions, through understanding OAM from the perspective of mode coupling in a photonic crystal ring and linking it to coherent backscattering between counter-propagating WGMs. In addition to demonstrating high-Q (10⁵ to 10⁶), a high estimated upper bound on OAM ejection efficiency (up to 90%), and high-OAM number (up to l = 60), our empirical model is supported by experiments and provides a quantitative explanation for the behavior of Q and the upper bound of OAM ejection efficiency with l. The state-of-the-art performance and understanding of microresonator OAM generation opens opportunities for OAM applications using chip-integrated technologies.

Synthesis of Arynes via Formal Dehydrogenation of Arenes

Arynes offer immense potential for diversification of benzenoid rings, which occur in pharmaceuticals, agrochemicals, and liquid crystals. However, accessing these high-energy intermediates requires synthetic precursors, which involve either harsh conditions or multistep syntheses. The development of alternative methods to access arynes using simpler substrates and milder conditions is necessary for a more streamlined approach. Here, we describe a two-step formal dehydrogenation of simple arenes to generate arynes at a remote position relative to traditionally reactive groups, e.g., halides. This approach is enabled by regioselective installation and ejection of an "onium" leaving group, and we demonstrate the compatibility of simple arenes (20 examples) and arynophiles (8 examples). Moreover, through direct comparison, we show that our formal dehydrogenation method is both more functional group tolerant and efficient in generating arynes than the current state-of-the-art aryne precursors. Finally, we show that aryne intermediates offer opportunities for regioselective C-H amination that are distinct from other methods.

Regiodivergent Cu-Promoted, AcOH-Switchable Distal Versus Proximal Direct Cyanation of 1-Aryl-1H-indazoles and 2-Aryl-2H-indazoles via Aerobic Oxidative C-H Bond Activation

A copper-promoted regiodivergent, AcOH-switchable, distal and proximal direct cyanation of N-aryl-(1H/2H)-indazoles via aerobic oxidative C(sp²)-H bond activation has been developed. The inclusion or exclusion of AcOH as an additive is the foremost cause for the positional switch in the C-CN bond formation method that results in (C-2')-cyanated 2-aryl-2H-indazoles 3a-j, (C-2')-cyanated 1-aryl-1H-indazoles 4a-j [distal], or C-3 cyanated 2-aryl-2H-indazoles 5a-i [proximal] products in good to excellent yields and showed various functional group tolerance. The cyanide (CN^-) ion surrogate was generated via the unification of dimethylformamide and ammonium iodide (NH₄I). The utilization of molecular oxygen (aerobic oxidative strategy) as a clean and safe oxidant is liable for generous value addition. The further pertinence of the developed protocol has been demonstrated by transforming the synthesized cyanated product into numerous other functional groups, which will, undoubtedly, accomplish utilization in the synthetic area of biologically important compounds and medicinal chemistry.

Catalytic Cyanation of C-N Bonds with CO2/NH3

Cyanation of benzylic C-N bonds is useful in the preparation of important α-aryl nitriles. The first general catalytic cyanation of α-(hetero)aryl amines, analogous to the Sandmeyer reaction of anilines, was developed using reductive cyanation with CO₂/NH₃. A broad array of α-aryl nitriles was obtained in high yields and regioselectivity by C-N cleavage of intermediates as ammonium salts. Good tolerance of functional groups such as ethers, CF₃, F, Cl, esters, indoles, and benzothiophenes was achieved. Using ¹³CO₂, a ¹³C-labeled tryptamine homologue (five steps, 31% yield) and Cysmethynil (six steps, 37% yield) were synthesized. Both electronic and steric effects of ligands influence the reactivity of alkyl nickel species with electrophilic silyl isocyanates and thus determine the reactivity and selectivity of the cyanation reaction. This work contributes to the understanding of the controllable activation of CO₂/NH₃ and provides the promising potential of the amine cyanation reaction in the synthesis of bio-relevant molecules.

Chlorination of arenes via the degradation of toxic chlorophenols

SignificanceChlorination reactions are widely applied in organic synthesis, with aryl chlorides being key intermediates in the synthesis of many pharmaceutical products. Here, we demonstrate that waste materials such as chlorophenol pollutants can be valorized as chlorination reagents via catalytic transfer of the chloro group during their mineralization for the generation of valuable aryl chlorides. This process adds value to the destruction of chlorophenol pollutants, and the concept could potentially be extended to the valorization of other classes of stockpiles awaiting mineralization.

Air-Tolerant Nickel-Catalyzed Cyanation of (Hetero)aryl Halides Enabled by Polymethylhydrosiloxane, a Green Reductant

An air-tolerant nickel-catalyzed cyanation of aryl bromides is reported. The reaction uses a NiCl₂/Xantphos catalyst in combination with substoichiometric quantities of zinc cyanide and polymethylhydrosiloxane. This silane is a green, homogeneous alternative to the traditional, insoluble solid reductant zinc and renders the reaction tolerant to air. The reaction can be performed under an air atmosphere, obviating the need for degassing, a glovebox, or Schlenk techniques. The reaction scope is broad, proceeding in good yields with a variety of (hetero)arenes.

Cu2 O-Catalyzed Conversion of Benzyl Alcohols Into Aromatic Nitriles via the Complete Cleavage of the C≡N Triple Bond in the Cyanide Anion

Nitrogen transfer from cyanide anion to an aldehyde is emerging as a promising method for the synthesis of aromatic nitriles. However, this method still suffers from a disadvantage that a use of stoichiometric Cu(II) or Cu(I) salts is required to enable the reaction. As we report herein, we overcame this drawback and developed a catalytic method for nitrogen transfer from cyanide anion to an alcohol via the complete cleavage of the C≡N triple bond using phen/Cu₂ O as the catalyst. The present condition allowed a series of benzyl alcohols to be smoothly converted into aromatic nitriles in moderate to high yields. In addition, the present method could be extended to the conversion of cinnamic alcohol to 3-phenylacrylonitrile.

An aerobic and green C-H cyanation of terminal alkynes

This study describes a benign C-H cyanation of terminal alkynes with α-cyanoesters serving as a nontoxic cyanide source. In situ generation of the key copper cyanide intermediate is proposed by a sequence of α-C-H oxidation and copper-mediated β-carbon elimination of α-cyanoesters, releasing the α-ketoester byproduct observed experimentally. The ensuing reaction of copper cyanide with terminal alkynes delivers preferentially cyanoalkynes and surpasses the possible Glaser type dimerization of terminal alkynes or the undesired accumulation of HCN under protic conditions. The presence of the co-oxidant K2S2O8 is crucial to this selectivity, probably by promoting oxidative transmetalation and the resulting formation of the Cu(iii)(acetylide)(CN) intermediate. All the reagents and salts used are commercially available, cheap and nontoxic, avoiding the use of highly toxic cyanide salts typically required in cyanation studies. The scope of this reaction is demonstrated with a set of alkynes and α-cyanoesters. The application of this method to late-stage functionalization of the terminal alkyne group in an estrone derivative is also feasible, showing its practical value for drug design.