Computational screen-out strategy for electrically pumped organic laser materials

High Mobility Emissive Organic Semiconductors for Optoelectronic Devices

High mobility emissive organic semiconductors (HMEOSCs) are a kind of unique semiconducting material that simultaneously integrates high charge carrier mobility and strong emission features, which are not only crucial for overcoming the performance bottlenecks of current organic optoelectronic devices but also important for constructing high-density integrated devices/circuits for potential smart display technologies and electrically pumped organic lasers. However, the development of HMEOSCs is facing great challenges due to the mutually exclusive requirements of molecular structures and packing modes between high charge carrier mobility and strong solid-state emission. Encouragingly, considerable advances on HMEOSCs have been made with continuous efforts, and the successful integration of these two properties within individual organic semiconductors currently presents a promising research direction in organic electronics. Representative progress, including the molecular design of HMEOSCs, and the exploration of their applications in photoelectric conversion devices and electroluminescent devices, especially organic photovoltaic cells, organic light-emitting diodes, and organic light-emitting transistors, are summarized in a timely manner. The current challenges of developing HMEOSCs and their potential applications in other related devices including electrically pumped organic lasers, spin organic light-emitting transistors are also discussed. We hope that this perspective will boost the rapid development of HMEOSCs with a new mechanism understanding and their wide applications in different fields entering a new stage.

Intrinsic Narrowband Blue Phosphorescent Materials and Their Applications in 3D Printed Self-monitoring Microfluidic Chips

Organic room-temperature phosphorescent (RTP) materials, especially with narrowband emission properties, exhibit great potential for applications in display and sensing, but have been seldom reported. Herein, a rare example of the intrinsic narrowband blue RTP material is fabricated and reported. A series of indolo[3,2,1-kl]phenothiazine derivatives, named Cphpz, 1O-Cphpz, and 2O-Cphpz, are designed and synthesized. Due to their relatively rigid structures, these three compounds showed deep blue narrowband emissions ranging from 396 to 434 nm with the full width at half maximum (FWHM) of 31, 26, and 31 nm, respectively. To the delight, compound 2O-Cphpz displayed intrinsic narrowband blue RTP at 448 nm with FWHM of 36 nm and a long-lived lifetime of 1.08 s in hydroxyethyl acrylate and acrylic acid matrix. Photophysical studies, single crystal analyses, and TD-DFT calculations are performed to elucidate further the relationships between molecular structures and the narrowband blue RTP properties. Meanwhile, because the narrowband blue RTP is highly sensitive to humidity, a visualizing droplet path optical microfluidic chip is efficiently fabricated through the digital light processing 3D printing.This work provides a rare example and a reliable strategy to realize narrowband blue RTP and further expand their applications in self-monitoring 3D printed structures.

Minimizing Efficiency Roll-Off in Organic Emitters via Enhancing Radiative Process and Reducing Binding Energy: A Theory Insight

Organic solid-state lasers have received increasing attention due to their great potential for realizing organic continuous-wave or electrically driven lasers. Moreover, they exhibit significant promise for optoelectronic devices due to their chemically tunable optoelectronic properties and cost-effective self-assembly traits. Recently, a great progress has been made in organic solid-state lasers via spatially separated charge injection and lasing. However, making directly electrically driven organic semiconductor lasers is very challenging. It is difficult because of a number of excitonic losses caused by the spin-forbidden nature as well as serious efficiency roll-off at a high current density. Here, a multifunction gain material, functioning both as a thermally activated delayed fluorescence (TADF) emitter with exceptional optical gain and as a source of phosphorescence, was theoretically investigated. The new molecule we designed exhibits a reduction of triplet accumulation through an effective exciton radiative process (5-fold boost in figure of merit) and significantly decreased exciton binding energy (dipole moment from 5.77 to 14.03 D), which benefit amplified spontaneous emission and lasing emission. Our work provides theoretical insights into organic solid-state lasers and may contribute to the development of new and efficient laser-gaining molecules.

Quantum interference features and thermoelectric properties of macrocyclic-single molecules: theoretical and modelling investigation

The quantum interference effect on the thermoelectric properties of cycloparaphenylacetylene-based molecular junctions was investigated theoretically using a combination of density functional theory (DFT) methods, a tight binding (Hückel) model (TBHM) and quantum transport theory (QTT). Manipulating the unique conjugation function of these molecules not only creates a quantum interference (QI) but it is also a robust strategy for improving the thermoelectric properties of these molecules. QI controls the transport behaviour and decreases the electrical conductance (G) from 0.14 × 10-7 to 0.67 × 10-11 S, as well as enhancing the Seebeck coefficient (S) from 14.4 to 294 μV K-1, and promoting the electronic figure of merit (Z el T) from 0.008 to 1.8, making these molecules promising candidates for thermoelectric applications.

Low-threshold distributed feedback laser based on holographic polymer dispersed liquid crystals through the oriented organic semiconductor films

A specific optimized configuration for low threshold organic semiconductor laser based on a holographic polymer dispersed liquid crystal (HPDLC) transmission grating was demonstrated. Here the organic semiconductor films and phase separated liquid crystal (LC) molecules were oriented along the direction of the HPDLC grating grooves. The influence of the organic semiconductor chain orientation and the excitation polarization on the optical properties of the materials has been investigated. Especially, when polymer chain orientation, LC molecules and pump light polarization are consistent with the direction of the grating grooves, the performance of the outgoing laser is greatly improved. Up to 9.78% conversion efficiency with a threshold lower to 0.12 μJ/pulse can be obtained, indicating their potential for high-performance organic optoelectronics.

Theoretical investigation of thermoelectric properties of methyl blue-based molecular junctions

Thermoelectric properties of a family of methyl blue-based molecular junctions were theoretically studied using a combination of density functional theory (DFT) methods, and quantum transport theory (QTT). Employing different numbers of amino groups not only proves itself as a powerful strategy for controlling the transport behaviour and lifting the transmission coefficient T(E) from 1.91 × 10-5 to 7.45 × 10-5 with increasing the amino groups from zero to four, but also it enhances the thermoelectric properties of these molecules, since it increases the Seebeck coefficient (S) from 106.8 to 202.4 μV K-1 and the electronic figure of merit (Z el T) has been raised from 0.15 to 0.35, making these molecules promising candidates for thermoelectric applications.

Progress and Perspective toward Continuous-Wave Organic Solid-State Lasers

A continuous-wave (CW) organic solid-state laser is highly desirable for spectroscopy, sensing, and communications, but is a significant challenge in optoelectronics. The accumulation of long-lived triplet excitons and relevant excited-state absorptions, as well as singlet-triplet annihilation, are the main obstacles to CW lasing. Here, progress in singlet- and triplet-state utilizations in organic gain media is reviewed to reveal the issues in working with triplets. Then, exciton behaviors that inhibit light oscillations during long excitation pulses are discussed. Further, recent advances in increasing organic lasing pulse widths from microseconds toward the indication of CW operation are summarized with respect to molecular designs, advanced resonator architectures, triplet scavenging, and potential triplet contribution strategies. Finally, future directions and perspectives are proposed for achieving stable CW organic lasers with significant triplet contribution.

Enhancing Reverse Intersystem Crossing in Triptycene-TADF Emitters: Theoretical Insights into Reorganization Energy and Heavy Atom Effects

Thermally activated delayed fluorescence (TADF) emitters based on the triptycene skeleton demonstrate exceptional performance, superior stability, and low efficiency roll-off. Understanding the interplay between the luminescent properties of triptycene-TADF molecules and their assembly environments, along with their excited-state characteristics, necessitates a comprehensive theoretical exploration. Herein, we predict the photophysical properties of triptycene-TADF molecules in a thin film environment using the quantum mechanics/molecular mechanics method and quantify their substantial dependency on the heavy atom effects and reorganization energies using the Marcus-Levich theory. Our calculated photophysical properties for two recently reported molecules closely align with experimental values. We design three novel triptycene-TADF molecules by incorporating chalcogen elements (O, S, and Se) to modify the acceptor units. These newly designed molecules exhibit reduced reorganization energies and enhanced reverse intersystem crossing (RISC) rates. The heavy atom effect amplifies spin-orbit coupling, thereby facilitating the RISC process, particularly at a remarkably high rate of ∼109 s-1.

Carbon Nanohoops: Multiple Molecular Templates for Exploring Spectroscopic, Electronic, and Thermoelectric Properties

A combination of density functional theory (DFT) methods and quantum transport theory (QTT) has been used to investigate the spectroscopic, electronic, and thermoelectric properties of carbon nanohoop molecules with different molecular templates. The connectivity type, along with inherent strain, impacts the transport behavior and creates a destructive quantum interference (DQI), which proves itself to be a powerful strategy to enhance the thermoelectric properties of these molecules, making them promising candidates for thermoelectric applications.

How does theory compare to experiment for oscillator strengths in electronic spectra? Proposing range-separated hybrids with reliable accountability

As an important quantity in atomic and molecular spectroscopy, oscillator strength should be mentioned. Oscillator strength is linked to the transition dipole moment and consequently to the transition probability between two states, where its magnitude is directly connected to the intensity of the peaks in ultraviolet-visible spectra. However, accurately accounting for oscillator strengths still remains one of the greatest challenges in theory and experiment. Given previous efforts in the context of investigations into oscillator strengths, the related theoretical treatments are relatively limited and have proven to be challenging. In this work, the oscillator strengths in the electronic spectra of organic compounds have thoroughly been investigated with the help of optimally tuned range-separated hybrids (OT-RSHs). In particular, variants of the OT-RSHs combined with the polarizable continuum model (PCM), OT-RSHs-PCM, as well as their screened versions accounting for the screening effects by the electron correlation through the dielectric constant, OT-SRSHs-PCM, are proposed for reliable prediction of the oscillator strengths. The role of the involved ingredients in the proposed methods, namely the underlying density functional approximations, short-range and long-range Hartree-Fock (HF) exchange, as well as the range-separation parameter, has been examined in detail. It is shown that any combination of the parameters in the proposed approximations does not render the reliable oscillator strengths, but a particular compromise among them is needed to describe the experimental data well. Perusing all the results of our developed methods, the best ones are found to be the generalized gradient approximation-based OT-RSHs-PCM, coupled with the linear response theory in the non-equilibrium solvation regime, with the correct asymptotic behavior and incorporating no (low) HF exchange contributions in the short-range part. The best proposed approximations also reveal superior performances not only with respect to their standard counterparts with the default parameters but also as compared to earlier range-separated functionals. Finally, the applicability of the best approximation is also put into broader perspective, where it is used for predicting the oscillator strengths in other sets of compounds not included in the process of developing the approximations. Hopefully, our proposed method can function as an affordable alternative to the expensive wave function-based methods for both theoretical modeling and confirming the experimental observations in the field of electronic spectroscopy.

Theoretical Insight into the Effect of Phosphorus Oxygenation on Nonradiative Decays: Comparative Analysis of P-Bridged Stilbene Analogs

Incorporation of the phosphorus element into a π-conjugated skeleton offers valuable prospects for adjusting the electronic structure of the resulting functional π-electron systems. Trivalent phosphorus has the potential to decrease the LUMO level through σ*-π* interaction, which is further enhanced by its oxygenation to the pentavalent P center. This study shows that utilizing our computational analysis to examine excited-state dynamics based on radiative/nonradiative rate constants and fluorescence quantum yield (ΦF) is effective for analyzing the photophysical properties of P-containing organic dyes. We theoretically investigate how the trivalent phosphanyl group and pentavalent phosphine oxide moieties affect radiative and nonradiative decay processes. We evaluate four variations of P-bridged stilbene analogs. Our analysis reveals that the primary decay pathway for photoexcited bis-phosphanyl-bridged stilbene is the intersystem crossing (ISC) to the triplet state and nonradiative. The oxidation of the phosphine moiety, however, suppresses the ISC due to the relative destabilization of the triplet states. The calculated rate constants match an increase in experimental ΦF from 0.07 to 0.98, as simulated from 0.23 to 0.94. The reduced HOMO-LUMO gap supports a red shift in the fluorescence spectra relative to the phosphine analog. The thiophene-fused variant with the nonoxidized trivalent P center exhibits intense emission with a high ΦF, 0.95. Our prediction indicates that the ISC transfer is obstructed owing to the relatively destabilized triplet state induced by the thiophene substitution. Conversely, the thiophene-fused analog with the phosphine oxide moieties triggers a high-rate internal conversion mediated by conical intersection, leading to a decreased ΦF.

Understanding Photophysical Properties of Molecules Relevant in Organic Semiconductor Laser Diodes from Electron Localization Function-Tuned and Solvent-Tuned Range-Separated Functionals

Organic semiconductor laser diodes (OSLDs) are prevalent in optoelectronics because of their sustainable energy applications. Organic molecules used in such diodes are usually large; hence, their studies are computationally challenging with high-end benchmark methods. Computational methods with reliable accuracy and efficiency are always indispensable. In the present work, we have applied our computationally inexpensive, nonempirically tuned [electron localization function (ELF*) and solvent (Sol*)] range-separated (RS) functionals to study five molecules used in OSLDs. The emission energies in three different environments [toluene, CBP (4,4'-bis(n-carbazolyl)-1,1'-biphenyl) film, and gas] have been computed with the tuned functionals and compared with the experimental emission energies. ELF* and Sol* functionals can accurately reproduce emission energies in toluene and CBP film environments. On the other hand, both ELF* and IP-tuned functionals with excited-state geometry (IP*) perform better in the gas phase. In addition, a comparative study is performed between time-dependent density functional theory and the Tamm-Dancoff approximation. Along with the emission energy, oscillator strength values have also been reported. Different IP-tuned RS parameters were obtained with the ground- and excited-state geometries. Interestingly, it has been observed that the optimally tuned RS parameter with excited-state geometry (IP*) performs better compared to that with ground-state geometries (IP). Fractional occupation calculations show that the tuned functionals exhibit less localization and delocalization error. The study envisages that ELF* and Sol* functionals can be used to design future candidates for OSLDs.

Quantum Dynamical Approach to Predicting the Optical Pumping Threshold for Lasing in Organic Materials

The quantum dynamic (QD) study of organic lasing (OL) is a challenging issue in organic optoelectronics. Previously, the phenomenological method has achieved success in describing experimental observation. However, it cannot directly bridge the laser threshold (LT) with microscopic parameters, which is the advantage of the QD method. In this paper, we propose a microscopic OL model and apply time-dependent wave packet diffusion to reveal the microscopic QD process of optically pumped lasing. LT is obtained from the onset of output as a function of optical input pumping. We predict that the LT has an optimal value as a function of the cavity volume and depends linearly on the intracavity photon leakage rate. The calculated structure-property relationships between molecular parameters and the LT are in qualitative agreement with the experimental results, confirming the reliability of our approach. This work is beneficial for understanding the OL mechanism and optimizing the design of organic laser materials.

Electrically driven organic laser using integrated OLED pumping

Organic semiconductors are carbon-based materials that combine optoelectronic properties with simple fabrication and the scope for tuning by changing their chemical structure1-3. They have been successfully used to make organic light-emitting diodes2,4,5 (OLEDs, now widely found in mobile phone displays and televisions), solar cells1, transistors6 and sensors7. However, making electrically driven organic semiconductor lasers is very challenging8,9. It is difficult because organic semiconductors typically support only low current densities, suffer substantial absorption from injected charges and triplets, and have additional losses due to contacts10,11. In short, injecting charges into the gain medium leads to intolerable losses. Here we take an alternative approach in which charge injection and lasing are spatially separated, thereby greatly reducing losses. We achieve this by developing an integrated device structure that efficiently couples an OLED, with exceptionally high internal-light generation, with a polymer distributed feedback laser. Under the electrical driving of the integrated structure, we observe a threshold in light output versus drive current, with a narrow emission spectrum and the formation of a beam above the threshold. These observations confirm lasing. Our results provide an organic electronic device that has not been previously demonstrated, and show that indirect electrical pumping by an OLED is a very effective way of realizing an electrically driven organic semiconductor laser. This provides an approach to visible lasers that could see applications in spectroscopy, metrology and sensing.

Toward Nonepitaxial Laser Diodes

Thin-film organic, colloidal quantum dot, and metal halide perovskite semiconductors are all being pursued in the quest for a wavelength-tunable diode laser technology that does not require epitaxial growth on a traditional semiconductor substrate. Despite promising demonstrations of efficient light-emitting diodes and low-threshold optically pumped lasing in each case, there are still fundamental and practical barriers that must be overcome to reliably achieve injection lasing. This review outlines the historical development and recent advances of each material system on the path to a diode laser. Common challenges in resonator design, electrical injection, and heat dissipation are highlighted, as well as the different optical gain physics that make each system unique. The evidence to date suggests that continued progress for organic and colloidal quantum dot laser diodes will likely hinge on the development of new materials or indirect pumping schemes, while improvements in device architecture and film processing are most critical for perovskite lasers. In all cases, systematic progress will require methods that can quantify how close new devices get with respect to their electrical lasing thresholds. We conclude by discussing the current status of nonepitaxial laser diodes in the historical context of their epitaxial counterparts, which suggests that there is reason to be optimistic for the future.

High-Performance Organic Laser Semiconductor Enabling Efficient Light-Emitting Transistors and Low-Threshold Microcavity Lasers

An organic light-emitting transistor (OLET) is a candidate device architecture for developing electrically pumped organic solid-state lasers, but it remains a critical challenge because of the lack of organic semiconductors that simultaneously possess a high solid-state emission efficiency (Φ_s), a high and balanced ambipolar mobility (μ_h,e), and a large stimulated emission cross-section. Here, we designed a molecule of 4,4'-bis(2-dibenzothiophenyl-vinyl)-biphenyl (DBTVB) and prepared its ultrathin single-crystal microplates with herringbone packing arrangements, which achieve balanced mobilities of μ_h = 3.55 ± 0.5 and μ_e = 2.37 ± 0.5 cm² V^-1 s^-1, a high Φ_s of 85 ± 3%, and striking low-threshold laser characteristics. Theoretical and experimental investigations reveal that a strong electronic coupling and a small reorganization energy ensure efficient charge transport; meanwhile, the exciton-vibration effect and negligible π-π orbital overlap give rise to highly emissive H-aggregates and facilitate laser emission. Furthermore, OLET-based DBTVB crystals offer an internal quantum efficiency approaching 100% and a record-high electroluminescence external quantum efficiency of 4.03%.

Integrating Unexpected High Charge-Carrier Mobility and Low-Threshold Lasing Action in an Organic Semiconductor

Integrating high charge-carrier mobility and low-threshold lasing action in an organic semiconductor is crucial for the realization of an electrically pumped laser, but remains a great challenge. Herein, we present an organic semiconductor, named as 2,7-di(2-naphthyl)-9H-fluorene (LD-2), which shows an unexpected high charge-carrier mobility of 2.7 cm²  V^-1  s^-1 and low-threshold lasing characteristic of 9.43 μJ cm^-2 and 9.93 μJ cm^-2 and high-quality factor (Q) of 2131 and 1684 at emission peaks of 420 and 443 nm, respectively. Detailed theoretical calculations and photophysical data analysis demonstrate that a large intermolecular transfer integral of 10.36-45.16 meV together with a fast radiative transition rate of 8.0×10⁸  s^-1 are responsible for the achievement of the superior integrated optoelectronic properties in the LD-2 crystal. These optoelectronic performances of LD-2 are among the highest reported low-threshold lasing organic semiconductors with efficient charge transport, suggesting its promise for research of electrically pumped organic lasers (EPOLs).

Thermally Activated Delayed Fluorescent Gain Materials: Harvesting Triplet Excitons for Lasing

Thermally activated delayed fluorescent (TADF) materials have attracted increasing attention because of their ability to harvest triplet excitons via a reverse intersystem crossing process. TADF gain materials that can recycle triplet excitons for stimulated emission are considered for solving the triplet accumulation problem in electrically pumped organic solid-state lasers (OSSLs). In this mini review, recent progress in TADF gain materials is summarized, and design principles are extracted from existing reports. The construction methods of resonators based on TADF gain materials are also introduced, and the challenges and perspectives for the future development of TADF gain materials are presented. It is hoped that this review will aid the advances in TADF gain materials and thus promote the development of electrically pumped OSSLs.

A Novel Strategy toward Thermally Activated Delayed Fluorescence from a Locally Excited State

It is well-known that thermally activated delayed fluorescence (TADF) is always generated from charge-transfer (CT) excited states in donor-acceptor (D-A) systems, which limits its application owing to a slow radiative process and a small stimulated emission cross section. Herein, a design strategy is proposed for realizing TADF from a locally excited (LE) state without a typical donor-acceptor type structure through controlling the intersystem crossing (ISC) and reverse intersystem crossing (RISC) processes between the lowest excited singlet with LE character and higher triplet states. Using this strategy, a boron difluoride derivative is theoretically predicted and experimentally synthesized to exhibit locally excited TADF (LE-TADF) with a fairly large radiative rate of 1.12 × 10⁸ s^-1, extremely fast RISC rate of 5.09 × 10¹⁰ s^-1, and a large stimulated emission cross section of 4.35 × 10^-17 cm², making this a promising organic amplified spontaneous emission (ASE) material. This work might open a new avenue to extend TADF materials, especially TADF laser emitters.

Excited-state properties of organic semiconductor dyes as electrically pumped lasing candidates from new optimally tuned range-separated models

Even though many efforts have been devoted to optical lasing in recent years, the realization of lasing by direct electrical excitation of organic semiconductors is hampered mainly due to optical losses from electrical contacts and electrical losses induced by triplets and polarons at high current densities. Hereby, accurately accounting for the electrically pumped organic semiconductor laser diodes (OSLDs) still remains one of the greatest challenges in optoelectronics. In this work, the excited-state characteristics of the organic semiconductor dyes used in the electrically pumped OSLDs have thoroughly been investigated using optimally tuned range-separated hybrids (OT-RSHs). Considering several experimentally known compounds of the electrically pumped OSLDs as working models, several variants of OT-RSHs, their combination forms with the polarizable continuum model (PCM), OT-RSH-PCM, as well as their screened versions accounting for the screening effects by the electron correlation through the scalar dielectric constant, OT-SRSHs, have been proposed for reliable prediction of their emission energies and oscillator strengths in both the gas and solvent phases. The role of involved ingredients in the models, namely, the underlying density functional approximations, short- and long-range exact-like exchange, as well as the range-separation parameter, has been examined in detail. It is shown that the newly designed OT-RSHs with the correct behavior of asymptotic exchange-correlation potential outperform the standard RSHs and other density functionals with both fixed and interelectronic distance-dependent exact-like exchange for describing the excite-state properties of compounds of the electrically pumped OSLDs. Concerning the computational cost of the models, it is unveiled that performing both the optimal tuning procedure and subsequent excited-state computations using OT-RSHs in the gas phase can be considered as a more reliable and affordable framework. Finally, the applicability of the proposed models is also put into a broader perspective for the computational design of several compounds as promising candidates to be used in the OSLD materials. Hopefully, our recommended OT-RSHs can function as efficient models for both the related theoretical modeling and confirming the experimental observations in the field of electrically pumped OSLDs.

Routescore: Punching the Ticket to More Efficient Materials Development

Self-driving laboratories, in the form of automated experimentation platforms guided by machine learning algorithms, have emerged as a potential solution to the need for accelerated science. While new tools for automated analysis and characterization are being developed at a steady rate, automated synthesis remains the bottleneck in the chemical space accessible to self-driving laboratories. Combining automated and manual synthesis efforts immediately significantly expands the explorable chemical space. To effectively direct the different capabilities of automated (higher throughput and less labor) and manual synthesis (greater chemical versatility), we describe a protocol, the RouteScore, that quantifies the cost of combined synthetic routes. In this work, the RouteScore is used to determine the most efficient synthetic route to a well-known pharmaceutical (structure-oriented optimization) and to simulate a self-driving laboratory that finds the most easily synthesizable organic laser molecule with specific photophysical properties from a space of ∼3500 possible molecules (property-oriented optimization). These two examples demonstrate the power and flexibility of our approach in mixed synthetic planning and optimization and especially in downselecting promising candidates from a large chemical space via an a priori estimation of the synthetic costs.

Exciton-Polaritons and Their Bose-Einstein Condensates in Organic Semiconductor Microcavities

Exciton-polaritons are half-light, half-matter bosonic quasiparticles formed by strong exciton-photon coupling in semiconductor microcavities. These hybrid particles possess the strong nonlinear interactions of excitons and keep most of the characteristics of the underlying photons. As bosons, above a threshold density they can undergo Bose-Einstein condensation to a polariton condensate phase and exhibit a rich variety of exotic macroscopic quantum phenomena in solids. Recently, organic semiconductors have been considered as a promising material platform for these studies due to their room-temperature stability, good processability, and abundant photophysics and photochemistry. Herein, recent advances of exciton-polaritons and their Bose-Einstein condensates in organic semiconductor microcavities are summarized. First, the basic physics is introduced, and then their emerging applications are highlighted. The remaining questions are also discussed and a personal viewpoint about the potential directions for future research is given.

Organic Single Crystals with High Photoluminescence Quantum Yields Close to 100% and High Mobility for Optoelectronic Devices

Organic single crystals with excellent optical and electrical properties are critical for the development of organic optoelectronics. Herein, two compounds 9,10-bis([N,N-diphenyl]-4'-phenylethynyl)anthracene (TPA-An) and 9,10-bis([1',3'-diphenyl]-5'-phenylethynyl)anthracene (TBA-An) are synthesized by introducing two different luminescent groups, triphenylamine and 1,3-diphenylbenzene, at the 9,10 positions of anthracene via triple bond connection. Single crystals based on TPA-An and TBA-An with a ribbon morphology obtained through the slow solvent-evaporation method exhibit high photoluminescence quantum yields (PLQYs) of 98% and 99% at room temperature, and remarkable hole mobilities of 0.45 and 0.15 cm² V^-1 s^-1 in single-crystal organic field-effect transistors (SC-OFETs). Furthermore, UV phototransistors based on the two single crystals obtain photosensitivities of 1.03 × 10³ and 3.45 × 10⁴ , ultrahigh photoresponsivities of 7.19 × 10⁵ and 1.50 × 10⁵ A W^-1 , and the detectivities exceeding 1.40 × 10¹⁶ and 1.60 × 10¹⁷ Jones.

High Mobility Organic Lasing Semiconductor with Crystallization-Enhanced Emission for Light-Emitting Transistors

The development of high mobility organic laser semiconductors with strong emission is of great scientific and technical importance, but challenging. Herein, we present a high mobility organic laser semiconductor, 2,7-diphenyl-9H-fluorene (LD-1) showing unique crystallization-enhanced emission guided by elaborately modulating its crystal growth process. The obtained one-dimensional nanowires of LD-1 show outstanding integrated properties including: high absolute photoluminescence quantum yield (PLQY) approaching 80 %, high charge carrier mobility of 0.08 cm²  V^-1  s^-1 , Fabry-Perot lasing characters with a low threshold of 86 μJ cm^-2 and a high-quality factor of ≈2400. Furthermore, electrically induced emission was obtained from an individual LD-1 crystal nanowire-based light-emitting transistor due to the recombination of holes and electrons simultaneously injected into the nanowire, which provides a good platform for the study of electrically pumped organic lasers and other related ultrasmall integrated electrical-driven photonic devices.

Organic Light-Emitting Transistors Entering a New Development Stage

Organic light-emitting transistors (OLETs) are possibly the smallest integrated optoelectronic devices that combine the switching and amplification mechanisms of organic field-effect transistors (OFETs) and the electroluminescent characteristic of organic light-emitting diodes (OLEDs). Such a unique architecture of OLETs makes them ideal for developing the next-generation display technology and electrically pumped lasers for miniaturized photonic devices and circuits. However, the development of OLETs has been slow. Recently, some exciting progress has been made with breakthroughs in high mobility emissive organic semiconductors, construction of high-performance OLETs, and fabrication of novel multifunctional OLETs. This recent slew of advances may represent the advent of a new development stage of OLETs and their related devices and circuits. In this paper, a detailed review of these fantastic advances is presented, with a special focus on the key points for developing high-performance OLETs. Finally, a brief conclusion is provided with a discussion on the challenges and future perspectives in this field.

Tunable Triplet-Mediated Multicolor Lasing from Nondoped Organic TADF Microcrystals

Thermally activated delayed fluorescent (TADF) emitters have received great attention in organic light-emitting diodes and laser diodes because of high exciton utilization efficiency and low optical loss caused by triplets. However, the direct observation of lasing emission from nondoped TADF microcrystals has yet to be reported. Here, we demonstrated a three-color (green, yellow, and red) microlaser from three nondoped TADF microcrystals with well-controlled geometries. The temperature-dependent dynamic analyses testify that the regenerated singlets which originated from the reverse intersystem crossing process at room temperature are beneficial for population inversion and reduce triplet-absorption/annihilation optical loses, together resulting in thermally activated lasing actions. Thanks to single-crystalline structures of TADF emitters, the relationship between triplet-harvesting capability and the molecular structure was systematically investigated. The results not only offer rational design of pure TADF gain materials but also provide guidance for the high-performance electrically driven organic solid-state lasers and multicolor laser integration.

Molecular Design Strategy for Simultaneously Strong Luminescence and High Mobility: Multichannel CH-π Interaction

It is a big challenge to achieve high-performance organic semiconductor materials integrating both high luminescence efficiency and carrier mobility, because they are commonly regarded as a pair of contradiction. Here, combining a tight-binding model and density functional theory/time-dependent density functional theory, we propose a theoretical protocol to characterize the luminescence efficiency via an excitonic effective mass and charge transport ability via charge effective mass at the same level. Applying this protocol to a series of organic semiconductor materials, we find that the multichannel CH-π interaction can induce a heavy excitonic effective mass and light charge effective mass, which effectively balance the light-emitting efficiency and carrier mobility. Thus, a practical molecular design strategy is figured out to exploit novel organic semiconductor materials with strong luminescence and fast carrier transport simultaneously.

Theoretical perspective on the luminescence mechanism of a hybridized local and charge transfer state emitter with aggregation induced emission: a QM/MM study

Relationship among basic molecular structures and intermolecular interactions as well as AIE–HLCT mechanisms are theoretically revealed.