Engineered assembly of water-dispersible nanocatalysts enables low-cost and green CO2 capture

Catalytic Membrane Vacuum Regeneration: Enhancing Energy Efficiency and Renewable Compatibility in Direct Air Capture

Liquid-based CO2 direct air capture (DAC) is a pivotal technology for mitigating climate change. Energy-intensive CO2 desorption, high regeneration temperatures, and solvent degradation are key challenges. Here, low-temperature catalytic membrane vacuum regeneration (C-MVR) as a promising approach for sustainable and energy-efficient DAC is developed and evaluated. Noncatalytic experiments are conducted using three commercial membrane modules and four green amino acid salts under varying conditions (e.g., temperatures and flowrates). Based on CO2 transfer rates, ultra-thin dense composite membranes and aqueous potassium taurinate (TauK) are the most promising for MVR in DAC applications. For C-MVR trials, commercial ion-exchange resin improves CO2 desorption fluxes by up to 64.4% and reduces thermal energy requirements by up to 39.1%. TauK demonstrates the highest CO2 flux and lowest thermal energy consumption. Parametric analysis of catalyst performance for varying temperatures, catalyst amount, and solvent concentrations is also performed. To minimize any potential precipitation in TauK, potassium carbonate (K2CO3) is added, showing minimal impact on CO2 desorption kinetics and catalyst improvement. The findings of this study highlight the practical applicability of C-MVR using green amino acid salts as a sustainable approach to boost CO2 desorption rate and reduce thermal energy input.

Crystalline Metal-Organic Framework Coatings Engineered via Metal-Phenolic Network Interfaces

Crystalline metal-organic frameworks (MOFs) have garnered extensive attention owing to their highly ordered porous structure and physicochemical properties. However, their practical application often requires their integration with various substrates, which is challenging because of their weakly adhesive nature and the diversity of substrates that exhibit different properties. Herein, we report the use of amorphous metal-phenolic network coatings to facilitate the growth of crystalline MOF coatings on various particle and planar substrates. Crystalline MOFs with different metal ions and morphologies were successfully deposited on substrates (13 types) of varying sizes, shapes, and surface chemistries. Furthermore, the physicochemical properties of the coated crystalline MOFs (e.g., composition, thickness) could be tuned using different synthesis conditions. The engineered MOF-coated membranes demonstrated excellent liquid and gas separation performance, exhibiting a high H2 permeance of 63200 GPU and a H2/CH4 selectivity of 10.19, likely attributable to the thin nature of the coating (~180 nm). Considering the vast array of MOFs available (>90,000) and the diversity of substrates, this work is expected to pave the way for creating a wide range of MOF composites and coatings with potential applications in diverse fields.

Recent advancements in carbon/metal-based nano-catalysts for the reduction of CO2 to value-added products

Due to the increased human activities in burning of fossil fuels and deforestation, the CO2 level in the atmosphere gets increased up to 415 ppm; although it is an essential component for plant growth, an increased level of CO2 in the atmosphere leads to global warming and catastrophic climate change. Various conventional methods are used to capture and utilize CO2, among that a feasible and eco-friendly technique for creating value-added products is the CO2RR. Photochemical, electrochemical, thermochemical, and biochemical approaches can be used to decrease the level of CO2 in the atmosphere. The introduction of nano-catalysts in the reduction process helps in the efficient conversion of CO2 with improved selectivity, increased efficiency, and also enhanced stability of the catalyst materials. Thus, in this mini-review of nano-catalysts, some of the products formed during the reduction process, like CH3OH, C2H5OH, CO, HCOOH, and CH4, are explained. Among different types of metal catalysts, carbonaceous, single-atom catalysts, and MOF based catalysts play a significant role in the CO2 RR process. The effects of the catalyst material on the surface area, composition, and structural alterations are covered in depth. To aid in the design and development of high-performance nano-catalysts for value-added products, the current state, difficulties, and future prospects are provided.

Cerium-MOF-Derived Composite Hierarchical Catalyst Enables Energy-Efficient and Green Amine Regeneration for CO2 Capture

The excessive energy consumed restricts the application of traditional postcombustion CO2 capture technology and limits the achievement of carbon-neutrality goals. Catalytic-rich CO2 amine regeneration has the potential to accelerate proton transfer and increase the energy efficiency in the CO2 separation process. Herein, we reported a Ce-metal-organic framework (MOF)-derived composite catalyst named HZ-Ni@UiO-66 with a hierarchical structure, which can increase the CO2 desorbed amount by 57.7% and decrease the relative heat duty by 36.5% in comparison with the noncatalytic monoethanolamine (MEA) regeneration process. The composite catalyst of the CeO2 coating from the UiO-66 precursor on the HZ-Ni carrier shows excellent stability with a long lifespan. The HZ-Ni@UiO-66 catalyst also shows a universal catalytic effect in typical blended amine systems with a large cyclic capacity. The HZ-Ni@UiO-66 catalyst effectively decreases the energy barrier of the CO2 desorption reaction to reduce the time required to reach thermodynamics, consequently saving the energy consumption generated by water evaporation. This research provides a new avenue for advancing amine regeneration with less heat duty at low temperatures.

Synergistic Catalysis of SO42-/TiO2-CNT for the CO2 Desorption Process with Low Energy Consumption

To address the issue of high energy consumption associated with monoethanolamine (MEA) regeneration in the CO2 capture process, solid acid catalysts have been widely investigated due to their performance in accelerating carbamate decomposition. The recently discovered carbon nanotube (CNT) catalyst presents efficient catalytic activity for bicarbonate decomposition. In this paper, bifunctional catalysts SO42-/TiO2-CNT (STC) were prepared, which could simultaneously catalyze carbamate and bicarbonate decomposition, and outstanding catalytic performance has been exhibited. STC significantly increased the CO2 desorption amount by 82.3% and decreased the relative heat duty by 46% compared to the MEA-CO2 solution without catalysts. The excellent stability of STC was confirmed by 15 cyclic absorption-desorption experiments, showing good practical feasibility for decreasing energy consumption in an industrial CO2 capture process. Furthermore, associated with the results of experimental characterization and theoretical calculations, the synergistic catalysis of STC catalysts via proton and charge transfer was proposed. This work demonstrated the potential of STC catalysts in improving the efficiency of amine regeneration processes and reducing energy consumption, contributing to the design of more effective and economical catalysts for carbon capture.

Adavosertib-encapsulated metal-organic frameworks for p53-mutated gallbladder cancer treatment via synthetic lethality

Adavosertib (ADA) is a WEE1 inhibitor that exhibits a synthetic lethal effect on p53-mutated gallbladder cancer (GBC). However, drug resistance due to DNA damage response compensation pathways and high toxicity limits further applications. Herein, estrone-targeted ADA-encapsulated metal-organic frameworks (ADA@MOF-EPL) for GBC synthetic lethal treatment by inducing conditional factors are developed. The high expression of estrogen receptors in GBC enables ADA@MOF-EPL to quickly enter and accumulate near the cell nucleus through estrone-mediated endocytosis and release ADA to inhibit WEE1 upon entering the acidic tumor microenvironment. Ultrasound irradiation induces ADA@MOF-EPL to generate reactive oxygen species (ROS), which leads to a further increase in DNA damage, resulting in a higher sensitivity of p53-mutated cancer cells to WEE1 inhibitor and promoting cell death via conditional synthetic lethality. The conditional factor induced by ADA@MOF-EPL further enhances the antitumor efficacy while significantly reducing systemic toxicity. Moreover, ADA@MOF-EPL demonstrates similar antitumor abilities in other p53-mutated solid tumors, revealing its potential as a broad-spectrum antitumor drug.

Sulfur Migration Enhanced Proton-Coupled Electron Transfer for Efficient CO2 Desorption with Core-Shelled C@Mn3O4

Transforming hazardous species into active sites by ingenious material design was a promising and positive strategy to improve catalytic reactions in industrial applications. To synergistically address the issue of sluggish CO2 desorption kinetics and SO2-poisoning solvent of amine scrubbing, we propose a novel method for preparing a high-performance core-shell C@Mn3O4 catalyst for heterogeneous sulfur migration and in situ reconstruction to active -SO3H groups, and thus inducing an enhanced proton-coupled electron transfer (PCET) effect for CO2 desorption. As anticipated, the rate of CO2 desorption increases significantly, by 255%, when SO2 is introduced. On a bench scale, dynamic CO2 capture experiments reveal that the catalytic regeneration heat duty of SO2-poisoned solvent experiences a 32% reduction compared to the blank case, while the durability of the catalyst is confirmed. Thus, the enhanced PCET of C@Mn3O4, facilitated by sulfur migration and simultaneous transformation, effectively improves the SO2 resistance and regeneration efficiency of amine solvents, providing a novel route for pursuing cost-effective CO2 capture with an amine solvent.

Embedded Mo/Mn Atomic Regulation for Durable Acidity-Reinforced HZSM-5 Catalyst toward Energy-Efficient Amine Regeneration

Metal-molecular sieve composites with high acidity are promising solid acid catalysts (SACs) for accelerating sluggish CO2 desorption processes and reducing the energy consumption of CO2 chemisorption systems. However, the production of such SACs through conventional approaches such as loading or ion-exchange methods often leads to uncontrolled and unstable metal distribution on the catalysts, which limits their pore structure regulation and catalytic performance. In this study, we demonstrated a feasible strategy for improving the durability, surface chemical activity, and pore structure of metal-doped HZSM-5 through bimetallic Mo/Mn modification. This strategy involves the immobilization of Mo-O-Mn species confined in an MFI structure by regulating MoO42- anions and Mn2+ cations. The embedded Mn/Mo species of low valence can strongly induce electron transfer and increase the density of compensatory H+ on the MoMn@H catalyst, thereby reducing the CO2 desorption temperature by 8.27 °C and energy consumption by 37% in comparison to a blank. The durability enhancement and activity regulation method used in this study is expected to advance the rational synthesis of metal-molecular sieve composites for energy-efficient CO2 capture using amine regeneration technology.

Liquid-Metal Solvents for Designing Hierarchical Nanoporous Metals at Low Temperatures

Metallic nanoarchitectures hold immense value as functional materials across diverse applications. However, major challenges lie in effectively engineering their hierarchical porosity while achieving scalable fabrication at low processing temperatures. Here we present a liquid-metal solvent-based method for the nanoarchitecting and transformation of solid metals. This was achieved by reacting liquid gallium with solid metals to form crystalline entities. Nanoporous features were then created by selectively removing the less noble and comparatively softer gallium from the intermetallic crystals. By controlling the crystal growth and dealloying conditions, we realized the effective tuning of the micro-/nanoscale porosities. Proof-of-concept examples were shown by applying liquid gallium to solid copper, silver, gold, palladium, and platinum, while the strategy can be extended to a wider range of metals. This metallic-solvent-based route enables low-temperature fabrication of metallic nanoarchitectures with tailored porosity. By demonstrating large-surface-area and scalable hierarchical nanoporous metals, our work addresses the pressing demand for these materials in various sectors.

Nonacid Carbon Materials as Catalysts for Monoethanolamine Energy-Efficient Regeneration

In the CO₂ capture process, solid acid catalysts have been widely adopted to decrease energy consumption in the amine regeneration process owing to abundant acid sites. However, acid sites unavoidably degenerate in the basic amine solution. To address the challenge, nonacid carbon materials including carbon molecular sieves, porous carbon, carbon nanotubes, and graphene are first proposed to catalyze amine regeneration. It is found that carbon materials can significantly increase the CO₂ desorption amount by 47.1-72.3% and reduce energy consumption by 32-42%. In 20 stability experiments, CO₂ loading was stable with the max difference value of 0.01 mol CO₂/mol monoethanolamine (MEA), and no obvious increase in the relative heat duty (the maximum difference is 4%) occurred. The stability of carbon materials is superior to excellent solid acid catalysts, and the desorption performance is comparable. According to the results of theoretical calculation and experimental characterization, the electron-transfer mechanism of nonacid carbon materials is proposed, which is not only beneficial for MEA regeneration but also the probable reason for the stable catalytic activity. Owing to the excellent catalytic performance of carbon nanotube (CNT) in the HCO₃^- decomposition, nonacid carbon materials are quite promising to enhance the desorption performance of novel blend amines, which will further reduce the cost of carbon capture in the industry. This study provides a new strategy to develop stable catalysts used for amine energy-efficient regeneration.

Surface ligand-assisted synthesis and biomedical applications of metal-organic framework nanocomposites

Metal-organic framework (MOF) nanocomposites have recently gained intensive attention for biosensing and disease therapy applications owing to their outstanding physiochemical properties. However, the direct growth of MOF nanocomposites is usually hindered by the mismatched lattice in the interface between the MOF and other nanocomponents. Surface ligands, molecules with surfactant-like properties, are demonstrated to exhibit the robust capability to modify the interfacial properties of nanomaterials and can be utilized as a powerful strategy for the synthesis of MOF nanocomposites. Besides this, surface ligands also exhibit significant functions in the morphological control and functionalization of MOF nanocomposites, thus greatly enhancing their performance in biomedical applications. In this review, the surface ligand-assisted synthesis and biomedical applications of MOF nanocomposites are comprehensively reviewed. Firstly, the synthesis of MOF nanocomposites is discussed according to the diverse roles of surface ligands. Then, MOF nanocomposites with different properties are listed with their applications in biosensing and disease therapy. Finally, current challenges and further directions of MOF nanocomposites are presented to motivate the development of MOF nanocomposites with elaborate structures, enriched functions, and excellent application prospects.

Facile Fabrication of Monodispersed Carbon Sphere: A Pathway Toward Energy-Efficient Direct Air Capture (DAC) Using Amino Acids

Direct removal of carbon dioxide (CO₂ ) from the atmosphere, known as direct air capture (DAC) is attracting worldwide attention as a negative emission technology to control atmospheric CO₂ concentrations. However, the energy-intensive nature of CO₂ absorption-desorption processes has restricted deployment of DAC operations. Catalytic solvent regeneration is an effective solution to tackle this issue by accelerating CO₂ desorption at lower regeneration temperatures. This work reports a one-step synthesis methodology to prepare monodispersed carbon nanospheres (MCSs) using trisodium citrate as a structure-directing agent with acidic sites. The assembly of citrate groups on the surface of MCSs enables consistent spherical growth morphology, reduces agglomeration and enhances water dispersibility. The functionalization-assisted synthesis produces uniform, hydrophilic nanospheres of 100-600 nm range. This work also demonstrates that the prepared MCSs can be further functionalized with strong Brønsted acid sites, providing high proton donation ability. Furthermore, the materials can be effectively used in a wide range of amino acid solutions to substantially accelerate CO₂ desorption (25.6% for potassium glycinate and 41.1% for potassium lysinate) in the DAC process. Considering the facile synthesis of acidic MCSs and their superior catalytic efficiency, these findings are expected to pave a new path for energy-efficient DAC.

Aqueous 2-Ethyl-4-methylimidazole Solution for Efficient CO2 Separation and Purification

Carbon capture and storage (CCS) technology is considered as one of the most effective short-term solutions in reducing atmospheric CO2 concentrations. A key of CCS technology is to seek the absorbent with low cost, fast absorption rate, and high stability. In this study, we show that 2-ethyl-4-methylimidazole is particularly suitable for efficient CO2 capture. The aqueous solution of 2-ethyl-4-methylimidazole displays a maximum CO2 molar absorption capacity of 1.0 mol∙mol−1 and the absorbed CO2 can be completely released through heating the solution at a relatively low temperature (<100 °C). Stability tests show that the aqueous system is quite stable, with less than 10% loss of the molar absorption capacity after eight absorption–desorption cycles. Time-related in-situ attenuated total reflection infrared absorption spectroscopy and 13C nuclear magnetic resonance spectroscopy studies reveal that the intermediates are HCO3− and H2CO3 in the process of CO2 absorption–desorption. These intermediates are easily decomposed, which are responsible for the low CO2 desorption temperature and high desorption efficiency of the system. Moreover, the aqueous solution of 2-ethyl-4-methylimidazole is able to separate and purify CO2 from flue gas and even ambient air. Consequently, 2-ethyl-4-methylimidazole is a promising low-cost CO2 absorbent for industrial implementation.

Biofuels and Nanocatalysts: Python Boosting Visualization of Similarities

Among the most relevant themes of modernity, using renewable resources to produce biofuels attracts several countries' attention, constituting a vital part of the global geopolitical chessboard since humanity's energy needs will grow faster and faster. Fortunately, advances in personal computing associated with free and open-source software production facilitate this work of prospecting and understanding complex scenarios. Thus, for the development of this work, the keywords "biofuel" and "nanocatalyst" were delivered to the Scopus database, which returned 1071 scientific articles. The titles and abstracts of these papers were saved in Research Information Systems (RIS) format and submitted to automatic analysis via the Visualization of Similarities Method implemented in VOSviewer 1.6.18 software. Then, the data extracted from the VOSviewer were processed by software written in Python, which allowed the use of the network data generated by the Visualization of Similarities Method. Thus, it was possible to establish the relationships for the pair between the nodes of all clusters classified by Link Strength Between Items or Terms (LSBI) or by year. Indeed, other associations should arouse particular interest in the readers. However, here, the option was for a numerical criterion. However, all data are freely available, and stakeholders can infer other specific connections directly. Therefore, this innovative approach allowed inferring that the most recent pairs of terms associate the need to produce biofuels from microorganisms' oils besides cerium oxide nanoparticles to improve the performance of fuel mixtures by reducing the emission of hydrocarbons (HC) and oxides of nitrogen (NOx).

MOF-Derived Robust and Synergetic Acid Sites Inducing C-N Bond Disruption for Energy-Efficient CO2 Desorption

Amine-based scrubbing technique is recognized as a promising method of capturing CO₂ to alleviate climate change. However, the less stability and poor acidity of solid acid catalysts (SACs) limit their potential to further improve amine regeneration activity and reduce the energy penalty. To address these challenges, here, we introduce two-dimensional (2D) cobalt-nitrogen-doped carbon nanoflakes (Co-N-C NSs) driven by a layered metal-organic framework that work as SACs. The designed 2D Co-N-C SACs can exhibit promising stability, superhydrophilic surface, and acidity. Such 2D structure also contains well-confined Co-N₄ Lewis acid sites and -OH Brønsted acid sites to have a synergetic effect on C-N bond disruption and significantly increase CO₂ desorption rate by 281% and reduce the reaction temperatures to 88 °C, minimizing water evaporation by 20.3% and subsequent regeneration energy penalty by 71.7% compared to the noncatalysis.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.