Impact of bimetallic interface design on heat generation in plasmonic Au/Pd nanostructures studied by single-particle thermometry

Highly Selective Synthesis of Acetic Acid from Hydroxyl-Mediated Oxidation of Methane at Low Temperatures

Direct methane conversion and, in particular, the aerobic oxidation to acetic acid, remain an eminent challenge. Here, we reported a zeolite-supported Au-Fe catalyst (Au-Fe/ZSM-5) that converted methane to acetic acid with molecular oxygen as an oxidant in the presence of CO. Specifically, Au nanoparticles catalyzed the formation of hydroxyl species from the reaction of CO, O2, and H2O, meanwhile ZSM-5-supported atomically dispersed Fe species were responsible for the hydroxyl-mediated coupling of CH4 and CO to generate acetic acid. The reaction over 50 mg of Au-Fe/ZSM-5 under 62 bar (CH4 : CO : O2=14 : 14 : 3) at 120 °C for 3.0 h yielded 5.7 millimoles of acetic acid per gram of the catalyst (mmol gcat -1) with the selectivity of 92 %, outperformed most of reported catalysts. Significantly, the catalyst remained active even at 60 °C. We anticipate that this hydroxyl-mediated route may guide the design of optimized catalysts for the direct methane functionalization at low temperatures.

Plasmon-powered chemistry with visible-light active copper nanoparticles

In the quest for affordable materials for performing visible-light driven chemistry, we report here intriguing optical and photothermal properties of plasmonic copper nanoparticles (CuNPs). Precise tuning of reaction conditions and surface functionalization yield stable and monodisperse CuNPs, with a strong localized surface plasmon absorption at ∼580 nm. The molar extinction coefficient is estimated to be ∼7.7 × 107 M-1 cm-1 at 580 nm, which signifies their suitability for various light-harnessing studies. The characteristic wine-red colour and crystallography studies confirm the presence of mainly Cu(0) atoms in CuNPs, which showed excellent long-term colloidal and compositional stability under ambient conditions (at least 50 days). The as-synthesized oleylamine-capped CuNPs are ligand-exchanged with charged thiolate ligands of both polarities to form stable dispersions in water, with complete retention of their plasmonic properties and structural integrity (for ∼2 days and ∼6 h under inert and ambient conditions, respectively). Photothermal-conversion efficiency of CuNPs is estimated to be ∼80%, raising the surrounding temperature to ∼170 °C within ∼30 s of irradiation with a 1 W 532 nm diode laser, which is 'hot' enough to perform useful solar-vapor generation and high-temperature crystal-to-crystal phase transformation. Our work projects plasmonic CuNPs as an affordable and effective alternative to conventional metal NPs to harness light-matter interactions for future plasmon-powered chemistry.

Esterification-Induced Spontaneous Deposition of Nanoparticle Monolayers on Substrates with Percolation Network Morphology

Nanoparticle monolayers (NPMLs) exhibit unique collective properties that are highly desirable for applications in sensors, catalysts, and optics. However, their practical use is often hindered by structural instability, especially when they are exposed to solvents. In this study, we developed a method for the spontaneous deposition of gold nanoparticle monolayers (AuNPMLs) on silicon substrates via covalent bonding interactions that provides excellent structural stability in solvents with varying polarities. The esterification reaction between carboxyl-functionalized gold nanoparticles and alkyl-chloride-functionalized silicon substrates spontaneously forms AuNPMLs on the substrate in which single-crystalline domains are interconnected, forming a percolation network morphology. The ex situ scanning electron microscopy measurements show that the surface coverage of AuNPMLs rapidly increases up to ca. 60% during the initial 10 min, followed by gradual growth and saturation at ca. 70% at 360 min of deposition time. On the other hand, the single-crystalline domain size reaches its maximum at 45 min and then gradually decreases, which may be attributed to the desorption of AuNPs by the hydrolysis of ester bonds. The reflectance spectra of AuNPMLs showed the red shift as the deposition time increases up to 45 min with a subsequent blue shift thereafter, which is consistent with the change of the single-crystalline domain size with the deposition time. The covalent bonding interaction-mediated nanoparticle deposition method can be used to form stable AuNPMLs with controlled surface coverage and domain size, allowing for fine control of the optical properties and possibly other properties. The excellent structural stability of AuNPMLs and their controlled properties may provide new opportunities for practical applications of NPMLs.

The paradox of thermal vs. non-thermal effects in plasmonic photocatalysis

The debate surrounding the roles of thermal and non-thermal pathways in plasmonic catalysis has captured the attention of researchers and sparked vibrant discussions within the scientific community. In this review, we embark on a thorough exploration of this intriguing discourse, starting from fundamental principles and culminating in a detailed understanding of the divergent viewpoints. We probe into the core of the debate by elucidating the behavior of excited charge carriers in illuminated plasmonic nanostructures, which serves as the foundation for the two opposing schools of thought. We present the key arguments and evidence put forth by proponents of both the non-thermal and thermal pathways, providing a perspective on their respective positions. Beyond the theoretical divide, we discussed the evolving methodologies used to unravel these mechanisms. We discuss the use of Arrhenius equations and their variations, shedding light on the ensuing debates about their applicability. Our review emphasizes the significance of localized surface plasmon resonance (LSPR), investigating its role in collective charge oscillations and the decay dynamics that influence catalytic processes. We also talked about the nuances of activation energy, exploring its relationship with the nonlinearity of temperature and light intensity dependence on reaction rates. Additionally, we address the intricacies of catalyst surface temperature measurements and their implications in understanding light-triggered reaction dynamics. The review further discusses wavelength-dependent reaction rates, kinetic isotope effects, and competitive electron transfer reactions, offering an all-inclusive view of the field. This review not only maps the current landscape of plasmonic photocatalysis but also facilitates future explorations and innovations to unlock the full potential of plasmon-mediated catalysis, where synergistic approaches could lead to different vistas in chemical transformations.

Au@AuPd Core-Alloyed Shell Nanoparticles for Enhanced Electrocatalytic Activity and Selectivity under Visible Light Excitation

Plasmonic catalysis has been employed to enhance molecular transformations under visible light excitation, leveraging the localized surface plasmon resonance (LSPR) in plasmonic nanoparticles. While plasmonic catalysis has been employed for accelerating reaction rates, achieving control over the reaction selectivity has remained a challenge. In addition, the incorporation of catalytic components into traditional plasmonic-catalytic antenna-reactor nanoparticles often leads to a decrease in optical absorption. To address these issues, this study focuses on the synthesis of bimetallic core@shell Au@AuPd nanoparticles (NPs) with ultralow loadings of palladium (Pd) into gold (Au) NPs. The goal is to achieve NPs with an Au core and a dilute alloyed shell containing both Au and Pd, with a low Pd content of around 10 atom %. By employing the (photo)electrocatalytic nitrite reduction reaction (NO2RR) as a model transformation, experimental and theoretical analyses show that this design enables enhanced catalytic activity and selectivity under visible light illumination. We found that the optimized Pd distribution in the alloyed shell allowed for stronger interaction with key adsorbed species, leading to improved catalytic activity and selectivity, both under no illumination and under visible light excitation conditions. The findings provide valuable insights for the rational design of antenna-reactor plasmonic-catalytic NPs with controlled activities and selectivity under visible light irradiation, addressing critical challenges to enable sustainable molecular transformations.

Effect of crystal facets in plasmonic catalysis

While the role of crystal facets is well known in traditional heterogeneous catalysis, this effect has not yet been thoroughly studied in plasmon-assisted catalysis, where attention has primarily focused on plasmon-derived mechanisms. Here, we investigate plasmon-assisted electrocatalytic CO2 reduction using different shapes of plasmonic Au nanoparticles - nanocube (NC), rhombic dodecahedron (RD), and octahedron (OC) - exposing {100}, {110}, and {111} facets, respectively. Upon plasmon excitation, Au OCs doubled CO Faradaic efficiency (FECO) and tripled CO partial current density (jCO) compared to a dark condition, with NCs also improving under illumination. In contrast, Au RDs maintained consistent performance irrespective of light exposure, suggesting minimal influence of light on the reaction. Temperature experiments ruled out heat as the main factor to explain such differences. Atomistic simulations and electromagnetic modeling revealed higher hot carrier abundance and electric field enhancement on Au OCs and NCs than RDs. These effects now dominate the reaction landscape over the crystal facets, thus shifting the reaction sites when comparing dark and plasmon-activated processes. Plasmon-assisted H2 evolution reaction experiments also support these findings. The dominance of low-coordinated sites over facets in plasmonic catalysis suggests key insights for designing efficient photocatalysts for energy conversion and carbon neutralization.

Enhanced Light-Matter Interaction in Metallic Nanoparticles: A Generic Strategy of Smart Void Filling

The intrinsic properties of materials play a substantial role in light-matter interactions, impacting both bulk metals and nanostructures. While plasmonic nanostructures exhibit strong interactions with photons via plasmon resonances, achieving efficient light absorption/scattering in other transition metals remains a challenge, impeding various applications related to optoelectronics, chemistry, and energy harvesting. Here, we propose a universal strategy to enhance light-matter interaction, through introducing voids onto the surface of metallic nanoparticles. This strategy spans nine metals including those traditionally considered optically inactive. The absorption cross section of void-filled nanoparticles surpasses the value of plasmonic (Ag/Au) counterparts with tunable resonance peaks across a broad spectral range. Notably, this enhancement is achieved under arbitrary polarizations and varied particle sizes and in the presence of geometric disorder, highlighting the universal adaptability. Our strategy holds promise for inspiring emerging devices in photocatalysis, bioimaging, optical sensing, and beyond, particularly when metals other than gold or silver are preferred.

Thermometries for Single Nanoparticles Heated with Light

The development of efficient nanoscale photon absorbers, such as plasmonic or high-index dielectric nanostructures, allows the remotely controlled release of heat on the nanoscale using light. These photothermal nanomaterials have found applications in various research and technological fields, ranging from materials science to biology. However, measuring the nanoscale thermal fields remains an open challenge, hindering full comprehension and control of nanoscale photothermal phenomena. Here, we review and discuss existent thermometries suitable for single nanoparticles heated under illumination. These methods are classified in four categories according to the region where they assess temperature: (1) the average temperature within a diffraction-limited volume, (2) the average temperature at the immediate vicinity of the nanoparticle surface, (3) the temperature of the nanoparticle itself, and (4) a map of the temperature around the nanoparticle with nanoscale spatial resolution. In the latter, because it is the most challenging and informative type of method, we also envisage new combinations of technologies that could be helpful in retrieving nanoscale temperature maps. Finally, we analyze and provide examples of strategies to validate the results obtained using different thermometry methods.

Dry synthesis of bi-layer nanoporous metal films as plasmonic metamaterial

Nanoporous metals are a class of nanostructured materials finding extensive applications in multiple fields thanks to their unique properties attributed to their high surface area and interconnected nanoscale ligaments. They can be prepared following different strategies, but the deposition of an arbitrary pure porous metal is still challenging. Recently, a dry synthesis of nanoporous films based on the plasma treatment of metal thin layers deposited by physical vapour deposition has been demonstrated, as a general route to form pure nanoporous films from a large set of metals. An interesting aspect related to this approach is the possibility to apply the same methodology to deposit the porous films as a multilayer. In this way, it is possible to explore the properties of different porous metals in close contact. As demonstrated in this paper, interesting plasmonic properties emerge in a nanoporous Au-Ag bi-layer. The versatility of the method coupled with the possibility to include many different metals, provides an opportunity to tailor their optical resonances and to exploit the chemical and mechanical properties of components, which is of great interest to applications ranging from sensing, to photochemistry and photocatalysis.

Pt-doped Ru nanoparticles loaded on 'black gold' plasmonic nanoreactors as air stable reduction catalysts

This study introduces a plasmonic reduction catalyst, stable only in the presence of air, achieved by integrating Pt-doped Ru nanoparticles on black gold. This innovative black gold/RuPt catalyst showcases good efficiency in acetylene semi-hydrogenation, attaining over 90% selectivity with an ethene production rate of 320 mmol g-1 h-1. Its stability, evident in 100 h of operation with continuous air flow, is attributed to the synergy of co-existing metal oxide and metal phases. The catalyst's stability is further enhanced by plasmon-mediated concurrent reduction and oxidation of the active sites. Finite-difference time-domain simulations reveal a five-fold electric field intensification near the RuPt nanoparticles, crucial for activating acetylene and hydrogen. Kinetic isotope effect analysis indicates the contribution from the plasmonic non-thermal effects along with the photothermal. Spectroscopic and in-situ Fourier transform infrared studies, combined with quantum chemical calculations, elucidate the molecular reaction mechanism, emphasizing the cooperative interaction between Ru and Pt in optimizing ethene production and selectivity.

Atomistic Theory of Hot-Carrier Relaxation in Large Plasmonic Nanoparticles

Recently, there has been significant interest in harnessing hot-carriers generated from the decay of localized surface plasmons in metallic nanoparticles for applications in photocatalysis, photovoltaics, and sensing. In this work, we develop an atomistic method that makes it possible to predict the population of hot-carriers under continuous wave illumination for large nanoparticles of relevance to experimental studies. For this, we solve the equation of motion of the density matrix, taking into account both the excitation of hot-carriers and subsequent relaxation effects. We present results for spherical Au and Ag nanoparticles with up to 250,000 atoms. We find that the population of highly energetic carriers depends on both the material and the nanoparticle size. We also study the increase in the electronic temperature upon illumination and find that Ag nanoparticles exhibit a much larger temperature increase than Au nanoparticles. Finally, we investigate the effect of using different models for the relaxation matrix but find that the qualitative features of the hot-carrier population are robust. These insights can be harnessed for the design of improved hot-carrier devices.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Impact of bimetallic interface design on heat generation in plasmonic Au/Pd nanostructures studied by single-particle thermometry

Localized surface plasmons are lossy and generate heat. However, accurate measurement of the temperature of metallic nanoparticles under illumination remains an open challenge, creating difficulties in the interpretation of results across plasmonic applications. Particularly, there is a quest for understanding the role of temperature in plasmon-assisted catalysis. Bimetallic nanoparticles combining plasmonic with catalytic metals are raising increasing interest in artificial photosynthesis and the production of solar fuels. Here, we perform single-particle thermometry measurements to investigate the link between morphology and light-to-heat conversion of colloidal Au/Pd nanoparticles with two different configurations: core-shell and core-satellite. It is observed that the inclusion of Pd as a shell strongly reduces the photothermal response in comparison to the bare cores, while the inclusion of Pd as satellites keeps photothermal properties almost unaffected. These results contribute to a better understanding of energy conversion processes in plasmon-assisted catalysis.