Hole utilization in solar hydrogen production

A binary dumbbell visible light driven photocatalyst for simultaneous hydrogen production with the selective oxidation of benzyl alcohol to benzaldehyde

Photocatalytic H2 production with selective oxidation of organic moieties in an aqueous medium is a fascinating research area. However, the rational design of photocatalysts and their photocatalytic performance are still inadequate. In this work, we efficiently synthesized the MoS2 tipped CdS nanowires (NWs) photocatalyst using soft templates via the two-step hydrothermal method for efficient H2 production with selective oxidation of benzyl alcohol (BO) under visible light illumination. The optimized MoS2 tipped CdS NWs (20 % MoS2) photocatalyst exhibits the highest photocatalytic H2 production efficiency of 13.55 mmol g-1 h-1 with 99 % selective oxidation of BO, which was 42.34 and 2.21 times greater photocatalytic performance than that of pristine CdS NWs and MoS2/CdS NWs, respectively. The directional loading of MoS2 at the tips of CdS NWs (as compared to nondirectional MoS2 at CdS NWs) is the key factor towards superior H2 production with 99 % selective oxidation of BO and has an inhibitory effect on the photo corrosion of pristine CdS NWs. Therefore, the amazing enhancement in the photocatalytic performance and selectivity of optimized MoS2 tipped CdS NWs (20 % MoS2) photocatalyst is due to the spatial separation of their photoexcited charge carriers through the Schottky junction. Moreover, the unique structure of the MoS2 flower at the tip of 1D CdS NWs offers separate active sites for adsorption and surface reactions such as H2 production at the MoS2 flower (confirmed by Pt photo deposition) and subsequently the selective oxidation of BO at the stem of CdS NWs. This rational design of a photocatalyst could be an inspiring work for the further development of an efficient photocatalytic system for H2 production with selective oxidation of BO (a strategy of mashing two potatoes with one fork).

Molecular Photoelectrochemical Energy Storage Materials for Coupled Solar Batteries

ConspectusSolar-to-electrochemical energy storage is one of the essential solar energy utilization pathways alongside solar-to-electricity and solar-to-chemical conversion. A coupled solar battery enables direct solar-to-electrochemical energy storage via photocoupled ion transfer using photoelectrochemical materials with light absorption/charge transfer and redox capabilities. Common photoelectrochemical materials face challenges due to insufficient solar spectrum utilization, which restricts their redox potential window and constrains energy conversion efficiency. In contrast, molecular photoelectrochemical energy storage materials are promising for their mechanism of exciton-involved redox reaction that allows for extra energy utilization from hot excitons generated by superbandgap excitation and localized heat after absorption of sub-bandgap photons. This enables more efficient redox reactions with a less restricted redox potentials window and, thus, better utilization of the full solar spectrum. Despite these advantages, practical application remains elusive due to the mismatch between the short lifetime of the charge separation state (μs). This mismatch results in a significant portion of the photogenerated charges recombining before participating in desired electrochemical energy storage reactions, leading to diminished overall efficiency. It is therefore highly important to develop molecular materials with intrinsic prolonged charge separation state and extrinsic effective mass-electron transfer to enable efficient coupled solar batteries for practical applications.In this Account, we begin with an introduction of the general solar-to-electrochemical energy storage concept based on molecular photoelectrochemical energy storage materials, highlighting the advantages of periodic oxidative donor-reductive acceptor porous aggregate structures that have synergistic implications on charge separation state lifetime extension and mass-electron transfer. We then present our earliest trial on the design and application of molecular photoelectrochemical energy storage materials, which stimulated our subsequent studies on tuning electron donor and acceptor structures for enhanced charge separation and diverse photoelectrochemical redox reactions. Moreover, we introduce the best practices in the design and assembly of various coupled solar battery devices, along with our literature contributions and progresses in solar-to-electrochemical energy storage efficiency (ηSES) over nearly the past decade. Finally, we conclude by highlighting the universality of our strategies as essential design principles, spanning from regulating long-lived charge separation states and photocoupled ion transfer processes in molecular materials to the construction of efficient coupled solar batteries. We offer perspectives on the synergy between photovoltage and redox potentials and the practical significance of 3D printing, providing key evaluation indicators for large-scale application. This Account provides molecular level insights for the construction of high-efficiency photoelectrochemical energy storage materials and guidance for practical solar-to-electrochemical energy storage applications.

Defects of Metal Halide Perovskites in Photocatalytic Energy Conversion: Friend or Foe?

Photocatalytic solar-to-fuel conversion over metal halide perovskites (MHPs) has recently attracted much attention, while the roles of defects in MHPs are still under debate. Specifically, the mainstream viewpoint is that the defects are detrimental to photocatalytic performance, while some recent studies show that certain types of defects contribute to photoactivity enhancement. However, a systematic summary of why it is contradictory and how the defects in MHPs affect photocatalytic performance is still lacking. In this review, the innovative roles of defects in MHP photocatalysts are highlighted. First, the origins of defects in MHPs are elaborated, followed by clarifying certain benefits of defects in photocatalysts including optical absorption, charge dynamics, and surface reaction. Afterward, the recent progress on defect-related MHP photocatalysis, i.e., CO2 reduction, H2 generation, pollutant degradation, and organic synthesis is systematically discussed and critically appraised, putting emphasis on their beneficial effects. With defects offering peculiar sets of merits and demerits, the personal opinion on the ongoing challenges is concluded and outlining potentially promising opportunities for engineering defects on MHP photocatalysts. This critical review is anticipated to offer a better understanding of the MHP defects and spur some inspiration for designing efficient MHP photocatalysts.

Ru/Ir-Based Electrocatalysts for Oxygen Evolution Reaction in Acidic Conditions: From Mechanisms, Optimizations to Challenges

The generation of green hydrogen by water splitting is identified as a key strategic energy technology, and proton exchange membrane water electrolysis (PEMWE) is one of the desirable technologies for converting renewable energy sources into hydrogen. However, the harsh anode environment of PEMWE and the oxygen evolution reaction (OER) involving four-electron transfer result in a large overpotential, which limits the overall efficiency of hydrogen production, and thus efficient electrocatalysts are needed to overcome the high overpotential and slow kinetic process. In recent years, noble metal-based electrocatalysts (e.g., Ru/Ir-based metal/oxide electrocatalysts) have received much attention due to their unique catalytic properties, and have already become the dominant electrocatalysts for the acidic OER process and are applied in commercial PEMWE devices. However, these noble metal-based electrocatalysts still face the thorny problem of conflicting performance and cost. In this review, first, noble metal Ru/Ir-based OER electrocatalysts are briefly classified according to their forms of existence, and the OER catalytic mechanisms are outlined. Then, the focus is on summarizing the improvement strategies of Ru/Ir-based OER electrocatalysts with respect to their activity and stability over recent years. Finally, the challenges and development prospects of noble metal-based OER electrocatalysts are discussed.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

Hydrogen energy systems: Technologies, trends, and future prospects

This review critically examines hydrogen energy systems, highlighting their capacity to transform the global energy framework and mitigate climate change. Hydrogen showcases a high energy density of 120 MJ/kg, providing a robust alternative to fossil fuels. Adoption at scale could decrease global CO2 emissions by up to 830 million tonnes annually. Despite its potential, the expansion of hydrogen technology is curtailed by the inefficiency of current electrolysis methods and high production costs. Presently, electrolysis efficiencies range between 60 % and 80 %, with hydrogen production costs around $5 per kilogram. Strategic advancements are necessary to reduce these costs below $2 per kilogram and push efficiencies above 80 %. Additionally, hydrogen storage poses its own challenges, requiring conditions of up to 700 bar or temperatures below -253 °C. These storage conditions necessitate the development of advanced materials and infrastructure improvements. The findings of this study emphasize the need for comprehensive strategic planning and interdisciplinary efforts to maximize hydrogen's role as a sustainable energy source. Enhancing the economic viability and market integration of hydrogen will depend critically on overcoming these technological and infrastructural challenges, supported by robust regulatory frameworks. This comprehensive approach will ensure that hydrogen energy can significantly contribute to a sustainable and low-carbon future.

Triplet-triplet annihilation photon upconversion-mediated photochemical reactions

Photon upconversion is a method for harnessing high-energy excited states from low-energy photons. Such photons, particularly in the red and near-infrared wavelength ranges, can penetrate tissue deeply and undergo less competitive absorption in coloured reaction media, enhancing the efficiency of large-scale reactions and in vivo phototherapy. Among various upconversion methodologies, the organic-based triplet-triplet annihilation upconversion (TTA-UC) stands out - demonstrating high upconversion efficiencies, requiring low excitation power densities and featuring tunable absorption and emission wavelengths. These factors contribute to improved photochemical reactions for fields such as photoredox catalysis, photoactivation, 3D printing and immunotherapy. In this Review, we explore concepts and design principles of organic TTA-UC-mediated photochemical reactions, highlighting notable advancements in the field, as well as identify challenges and propose potential solutions. This Review sheds light on the potential of organic TTA-UC to advance beyond the traditional photochemical reactions and paves the way for research in various fields and clinical applications.

Concurrent Ammonia Synthesis and Alcohol Oxidation Boosted by Glutathione-Capped Quantum Dots under Visible Light

Mother nature accomplishes efficient ammonia synthesis via cascade N2 oxidation by lightning strikes followed with enzyme-catalyzed nitrogen oxyanion (NOx -, x = 2,3) reduction. The protein environment of enzymatic centers for NOx --to-NH4 + process greatly inspires the design of glutathione-capped (GSH) quantum dots (QDs) for ammonia synthesis under visible light (440 nm) in tandem with plasma-enabled N2 oxidation. Mechanistic studies reveal that GSH induces positive shift of surface charge to strengthen the interaction between NOx - and QDs. Upon visible light irradiation of QDs, the balanced and rapid hole and electron transfer furnish GS·radicals for 2e-/2H+ alcohol oxidation and H·for 8e-/10H+ NO3 --to-NH4 + reduction simultaneously. For the first time, mmol-scale ammonia synthesis is realized with apparent quantum yields of 5.45% ± 0.64%, and gram-scale synthesis of value-added acetophenone and NH4Cl proceeds with 1:4 stoichiometry and stability, demonstrating promising multielectron and multiproton ammonia synthesis efficiency and sustainability with nature-inspired artificial photocatalysts.

Ultrafast Surface-Specific Spectroscopy of Water at a Photoexcited TiO2 Model Water-Splitting Photocatalyst

A critical step in photocatalytic water dissociation is the hole-mediated oxidation reaction. Molecular-level insights into the mechanism of this complex reaction under realistic conditions with high temporal resolution are highly desirable. Here, we use femtosecond time-resolved, surface-specific vibrational sum frequency generation spectroscopy to study the photo-induced reaction directly at the interface of the photocatalyst TiO2 in contact with liquid water at room temperature. Thanks to the inherent surface specificity of the spectroscopic method, we can follow the reaction of solely the interfacial water molecules directly at the interface at timescales on which the reaction takes place. Following the generation of holes at the surface immediately after photoexcitation of the catalyst with UV light, water dissociation occurs on a sub-20 ps timescale. The reaction mechanism is similar at pH 3 and 11. In both cases, we observe the conversion of H2 O into Ti-OH groups and the deprotonation of pre-existing Ti-OH groups. This study provides unique experimental insights into the early steps of the photo-induced dissociation processes at the photocatalyst-water interface, relevant to the design of improved photocatalysts.

Solar reforming as an emerging technology for circular chemical industries

The adverse environmental impacts of greenhouse gas emissions and persistent waste accumulation are driving the demand for sustainable approaches to clean-energy production and waste recycling. By coupling the thermodynamically favourable oxidation of waste-derived organic carbon streams with fuel-forming reduction reactions suitable for producing clean hydrogen or converting CO2 to fuels, solar reforming simultaneously valorizes waste and generates useful chemical products. With appropriate light harvesting, catalyst design, device configurations and waste pre-treatment strategies, a range of sustainable fuels and value-added chemicals can already be selectively produced from diverse waste feedstocks, including biomass and plastics, demonstrating the potential of solar-powered upcycling plants. This Review highlights solar reforming as an emerging technology that is currently transitioning from fundamental research towards practical application. We investigate the chemistry and compatibility of waste pre-treatment, introduce process classifications, explore the mechanisms of different solar reforming technologies, and suggest appropriate concepts, metrics and pathways for various deployment scenarios in a net-zero-carbon future.

Modulated Ultrathin NiCo-LDH Nanosheet-Decorated Zr3+-Rich Defective NH2-UiO-66 Nanostructure for Efficient Photocatalytic Hydrogen Evolution

Defect engineering through modification of their surface linkage is found to be an effective pathway to escalate the solar energy conversion efficiency of metal-organic frameworks (MOFs). Herein, defect engineering using controlled decarboxylation on the NH2-UiO-66 surface and integration of ultrathin NiCo-LDH nanosheets synergizes the hydrogen evolution reaction (HER) under a broad visible light regime. Diversified analytical methods including positron annihilation lifetime spectroscopy were employed to investigate the role of Zr3+-rich defects by analyzing the annihilation characteristics of positrons in NH2-UiO-66, which provides a deep insight into the effects of structural defects on the electronic properties. The progressively tuned photophysical properties of the NiCo-LDH@NH2-UiO-66-D-heterostructured nanocatalyst led to an impressive rate of HER (∼2458 μmol h-1 g-1), with an apparent quantum yield of ∼6.02%. The ultrathin NiCo-LDH nanosheet structure was found to be highly favored toward electrostatic self-assembly in the heterostructure for efficient charge separation. Coordination of Zr3+ on the surface of the NiCo-LDH nanosheet support through NH2-UiO-66 was confirmed by X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy techniques. Femtosecond transient absorption spectroscopy studies unveiled a photoexcited charge migration process from MOF to NiCo-LDH which favorably occurred on a picosecond time scale to boost the catalytic activity of the composite system. Furthermore, the experimental finding and HER activity are validated by density functional theory studies and evaluation of the free energy pathway which reveals the strong hydrogen binding over the surface and infers the anchoring effect of the ultrathin layered double hydroxide (LDH) in the vicinity of the Zr cluster with a strong host-guest interaction. This work provided a novel insight into efficient photocatalysis via defect engineering at the linker modulation in MOFs.

Key Strategies for Enhancing H2 Production in Transition Metal Oxide Based Photocatalysts

Transition metal oxides (TMOs) were one of the first photocatalysts used to produce hydrogen from water using solar energy. Despite the emergence of many other genres of photocatalysts over the years, TMO photocatalysts remain dominant due to their easy synthesis and unique physicochemical properties. Various strategies have been developed to enhance the photocatalytic activity of TMOs, but the solar-to-hydrogen (STH) conversion efficiency of TMO photocatalysts is still very low (<2 %), which is far below the targeted STH of 10 % for commercial viability. This article provides a comprehensive analysis of several widely used strategies, including oxygen defects control, doping, establishing interfacial junctions, and phase-facet-morphology engineering, that have been adopted to improve TMO photocatalysts. By critically evaluating these strategies and providing a roadmap for future research directions, this article serves as a valuable resource for researchers, students, and professionals seeking to develop efficient energy materials for green energy solutions.

Schiff Base Complex Cocatalyst with Coordinatively Unsaturated Cobalt Sites for Photoelectrochemical Water Oxidation

Integrating inorganic oxygen evolution cocatalysts (OECs) with photoanodes is regarded as an available strategy to increase the photogenerated charge utilization for accelerated water oxidation kinetics. Nevertheless, most widely used transition metal (oxyhydr)oxides OECs suffer from inevitable charge recombination at photoanode/OECs interfaces and underabundant catalytic active sites. Herein, a cobalt-organic complex with microflower-like features (denoted as MF) was constructed by coordination of Schiff base ligands and Co2+ metal ions and then decorated on porous BiVO4 employed as photoanodes for photoelectrochemical (PEC) water oxidation. The as-synthesized BiVO4/MF photoanode achieves a photocurrent density of 4.38 mA cm-2 and at 1.23 VRHE in 0.5 M Na2SO4 electrolyte under simulated 1 sun illumination, over approximately 5.48 times larger than that of BiVO4 counterpart, and exhibits a 120 mV cathodic shift of onset potential with outstanding photostability. Systematic characterizations reveal that the improved PEC efficiency is mainly attributed to the well-designed coordinatively unsaturated Co2+ sites, which not only serve as powerful photohole extraction engines along reversed interfacial Co-O-Bi bonds to promote charge transfer across the BiVO4/complex interface but also act as reaction active centers by accelerating surface water oxidation kinetics. This work provides new insights for designing highly effective OECs for PEC water oxidation.

Surface Hydroxylation during Water Splitting Promotes the Photoactivity of BiVO4(010) Surface by Suppressing Polaron-Mediated Charge Recombination

Polaron-based electron transport restricts the photoelectrochemical (PEC) water splitting efficiency of BiVO4. However, the location and dynamics of polarons are significantly dependent on the surface hydroxylation. By performing ab initio nonadiabatic molecular dynamics simulations, we demonstrated that hydroxylation of BiVO4(010) surface greatly alleviates the detrimental effect of oxygen-vacancy-induced electron polaron (EP). Surface hydroxylation stabilizes the EP at the surface to facilitate water splitting, makes the polaron a shallow localized state, and reduces the intensity of high-frequency V-O bond stretching vibrations. By decreasing the nonadiabatic coupling and decoherence time, the charge carrier lifetimes are extended by 1-3 orders of magnitude depending on the hydroxylation coverage. Our study not only reveals that the surface hydroxylation mitigated detrimental impacts of polarons in metal oxides but also provided valuable insights into the benign effect of intermediate species on the photocatalytic reactivity.

Recent Developments of Inorganic Nanosensitizers for Sonodynamic Therapy

As a noninvasive treatment, sonodynamic therapy (SDT) has been widely used in the treatment of tumors because of its ability to penetrate deep tissue with few side effects. As the key factor of SDT, it is meaningful to design and synthesize efficient sonosensitizers. Compared with organic sonosensitizers, inorganic sonosensitizers can be easily excited by ultrasound. In addition, inorganic sonosensitizers with stable properties, good dispersion, and long blood circulation time, have great development potential in SDT. This review summarizes possible mechanisms of SDT (sonoexcitation and ultrasonic cavitation) in detail. Based on these mechanisms, the design and synthesis of inorganic nanosonosensitizers can be divided into three categories: traditional inorganic semiconductor sonosensitizers, enhanced inorganic semiconductor sonosensitizers, and cavitation-enhanced sonosensitizers. Subsequently, the current efficient construction methods of sonosensitizers are summarized including accelerated semiconductor charge separation and enhanced production of reactive oxygen species through ultrasonic cavitation. Furthermore, the advantages and disadvantages of different inorganic sonosensitizers and detailed strategies are systematically discussed on how to enhance SDT. Hopefully, this review could provide new insights into the design and synthesis of efficient inorganic nano-sonosensitizers for SDT.

Photocatalytic Degradation of Acetaminophen in Aqueous Environments: A Mini Review

Over the past few decades, acetaminophen (ACT), a typical nonsteroidal anti-inflammatory drug (NSAID), has gained global usage, positioning itself as one of the most extensively consumed medications. However, the incomplete metabolism of ACT leads to a substantial discharge into the environment, classifying it as an environmental contaminant with detrimental effects on non-target organisms. Various wastewater treatment technologies have been developed for ACT removal to mitigate its potential environmental risk. Particularly, photocatalytic technology has garnered significant attention as it exhibits high efficiency in oxidizing and degrading a wide range of organic pollutants. This comprehensive review aims to systematically examine and discuss the application of photocatalytic technology for the removal of ACT from aqueous environments. Additionally, the study provides a detailed overview of the limitations associated with the photocatalytic degradation of ACT in practical applications, along with effective strategies to address these challenges.

Tandem cells for unbiased photoelectrochemical water splitting

Hydrogen is an essential energy carrier which will address the challenges posed by the energy crisis and climate change. Photoelectrochemical water splitting (PEC) is an important method for producing solar-powered hydrogen. The PEC tandem configuration harnesses sunlight as the exclusive energy source to drive both the hydrogen (HER) and oxygen evolution reactions (OER), simultaneously. Therefore, PEC tandem cells have been developed and gained tremendous interest in recent decades. This review describes the current status of the development of tandem cells for unbiased photoelectrochemical water splitting. The basic principles and prerequisites for constructing PEC tandem cells are introduced first. We then review various single photoelectrodes for use in water reduction or oxidation, and highlight the current state-of-the-art discoveries. Second, a close look into recent developments of PEC tandem cells in water splitting is provided. Finally, a perspective on the key challenges and prospects for the development of tandem cells for unbiased PEC water splitting are given.

Suppressing Methane Production to Boost High-Purity Hydrogen Production in Microbial Electrolysis Cells

Hydrogen gas (H₂) is an attractive fuel carrier due to its high specific enthalpy; moreover, it is a clean source of energy because in the combustion reaction with oxygen (O₂) it produces water as the only byproduct. The microbial electrolysis cell (MEC) is a promising technology for producing H₂ from simple or complex organics present in wastewater and solid wastes. Methanogens and non-archaeal methane (CH₄)-producing microorganisms (NAMPMs) often grow in the MECs and lead to rapid conversion of produced H₂ to CH₄. Moreover, non-archaeal methane production (NAMP) catalyzed by nitrogenase of photosynthetic bacteria was always overlooked. Thus, suppression of CH₄ production is required to enhance H₂ yield and production rate. This review comprehensively addresses the principles and current state-of-the-art technologies for suppressing methanogenesis and NAMP in MECs. Noteworthy, specific strategies aimed at the inhibition of methanogenic enzymes and nitrogenase could be a more direct approach than physical and chemical strategies for repressing the growth of methanogenic archaea. In-depth studies on the multiomics of CH₄ metabolism can possibly provide insights into sustainable and efficient approaches for suppressing metabolic pathways of methanogenesis and NAMP. The main objective of this review is to highlight key concepts, directions, and challenges related to boosting H₂ generation by suppressing CH₄ production in MECs. Finally, perspectives are briefly outlined to guide and advance the future direction of MECs for production of high-purity H₂ based on genetic and metabolic engineering and on the interspecific interactions.

Photochemistry Journey to Multielectron and Multiproton Chemical Transformation

The odyssey of photochemistry is accompanied by the journey to manipulate "electrons" and "protons" in time, in space, and in energy. Over the past decades, single-electron (1e^-) photochemical transformations have brought marvelous achievements. However, as each photon absorption typically generates only one exciton pair, it is exponentially challenging to accomplish multielectron and proton photochemical transformations. The multistep differences in thermodynamics and kinetics urgently require us to optimize light harvesting, expedite consecutive electron transfer, manipulate the interaction of catalysts with substrates, and coordinate proton transfer kinetics to furnish selective bond formations. Tandem catalysis enables orchestrating different photochemical events and catalytic transformations from subpicoseconds to seconds, which facilitates multielectron redox chemistries and brings consecutive, value-added reactivities. Joint efforts in molecular and material design, mechanistic understanding, and theoretical modeling will bring multielectron and proton synthetic opportunities for fuels, fertilizers, and chemicals with enhanced versatility, efficiency, selectivity, and scalability, thus taking better advantage of photons (i.e., sunlight) for our sustainable society.

Insight into the role of reduced graphene oxide for enhancing photocatalytic hydrogen evolution in disordered carbon nitride

Compared to crystalline carbon nitride, the performance of disordered carbon nitride (d-CN) as a hydrogen production photocatalyst is extremely poor. Owing to disordered atomic orientation, it is prone to numerous...