Molecular interaction of fibrinogen with zeolite nanoparticles

Physicochemical Targeting of Lipid Nanoparticles to the Lungs Induces Clotting: Mechanisms and Solutions

Lipid nanoparticles (LNPs) have become the dominant drug delivery technology in industry, holding the promise to deliver RNA to up or down-regulate any protein of interest. LNPs have mostly been targeted to specific cell types or organs by physicochemical targeting in which LNP's lipid compositions are adjusted to find mixtures with the desired tropism. Here lung-tropic LNPs are examined, whose organ tropism derives from containing either a cationic or ionizable lipid conferring a positive zeta potential. Surprisingly, these LNPs are found to induce massive thrombosis. Such thrombosis is shown in the lungs and other organs, and it is shown that it is greatly exacerbated by pre-existing inflammation. This clotting is induced by a variety of formulations with cationic lipids, including LNPs and non-LNP nanoparticles, and even by lung-tropic ionizable lipids that do not have a permanent cationic charge. The mechanism depends on the LNPs binding to and then changing the conformation of fibrinogen, which then activates platelets and thrombin. Based on these mechanisms, multiple solutions are engineered that enable positively charged LNPs to target the lungs while ameliorating thrombosis. The findings illustrate how physicochemical targeting approaches must be investigated early for risks and re-engineered with a careful understanding of biological mechanisms.

Preparation and Activity of Hemostatic and Antibacterial Dressings with Greige Cotton/Zeolite Formularies Having Silver and Ascorbic Acid Finishes

The need for prehospital hemostatic dressings that exert an antibacterial effect is of interest for prolonged field care. Here, we consider a series of antibacterial and zeolite formulary treatment approaches applied to a cotton-based dressing. The design of the fabric formulations was based on the hemostatic dressing TACGauze with zeolite Y incorporated as a procoagulant with calcium and pectin to facilitate fiber adherence utilizing silver nanoparticles, and cellulose-crosslinked ascorbic acid to confer antibacterial activity. Infra-red spectra were employed to characterize the chemical modifications on the dressings. Contact angle measurements were employed to document the surface hydrophobicity of the cotton fabric which plays a role in the contact activation of the coagulation cascade. Ammonium Y zeolite-treated dressings initiated fibrin equal to the accepted standard hemorrhage control dressing and showed similar improvement with antibacterial finishes. The antibacterial activity of cotton-based technology utilizing both citrate-linked ascorbate-cellulose conjugate analogs and silver nanoparticle-embedded cotton fibers was observed against Staphylococcus aureus and Klebsiella pneumoniae at a level of 99.99 percent in the AATCC 100 assay. The hydrogen peroxide levels of the ascorbic acid-based fabrics, measured over a time period from zero up to forty-eight hours, were in line with the antibacterial activities.

Application of Zeolites and Zeolitic Imidazolate Frameworks in Dentistry-A Narrative Review

Zeolites and zeolitic imidazolate frameworks (ZIFs) are crystalline aluminosilicates with porous structure, which are closely linked with nanomaterials. They are characterized by enhanced ion exchange capacity, physical-chemical stability, thermal stability and biocompatibility, making them a promising material for dental applications. This review aimed to provide an overview of the application of zeolites and ZIFs in dentistry. The common zeolite compounds for dental application include silver zeolite, zinc zeolite, calcium zeolite and strontium zeolite. The common ZIFs for dental application include ZIF-8 and ZIF-67. Zeolites and ZIFs have been employed in various areas of dentistry, such as restorative dentistry, endodontics, prosthodontics, implantology, periodontics, orthodontics and oral surgery. In restorative dentistry, zeolites and ZIFs are used as antimicrobial additives in dental adhesives and restorative materials. In endodontics, zeolites are used in root-end fillings, root canal irritants, root canal sealers and bone matrix scaffolds for peri-apical diseases. In prosthodontics, zeolites can be incorporated into denture bases, tissue conditioners, soft denture liners and dental prostheses. In implantology, zeolites and ZIFs are applied in dental implants, bone graft materials, bone adhesive hydrogels, drug delivery systems and electrospinning. In periodontics, zeolites can be applied as antibacterial agents for deep periodontal pockets, while ZIFs can be embedded in guided tissue regeneration membranes and guided bone regeneration membranes. In orthodontics, zeolites can be applied in orthodontic appliances. Additionally, for oral surgery, zeolites can be used in oral cancer diagnostic marker membranes, maxillofacial prosthesis silicone elastomer and tooth extraction medicines, while ZIFs can be incorporated to osteogenic glue or used as a carrier for antitumour drugs. In summary, zeolites have a broad application in dentistry and are receiving more attention from clinicians and researchers.

Competition of opsonins and dysopsonins on the nanoparticle surface

The biological behavior and fate of nanoparticles are dependent on their retention time in the blood circulation system. The protein corona components, especially opsonins, and dysopsonins, adsorbed on the nanoparticle surface determine their blood circulation time. The protein corona formation is a dynamic process that involves the competition between different proteins to be adsorbed on the nanoparticles. Therefore, studying how proteins compete and are oriented on the nanoparticle surface is essential. We hypothesized that the presence of opsonins (immunoglobulin (IgG)) might affect the adsorption of dysopsonins (human serum albumin (HSA)) and vice versa. Using the molecular dynamics simulations, we showed that the adsorption of HSA on the GO surface after the IgG adsorption is more probable than the opposite order of adsorption. It was also observed that the higher lateral diffusion of the HSA compared to the IgG helped the system reach a more stable configuration while the initial adsorption of the HSA limits the lateral diffusion of IgG. Therefore, replacing IgG adsorbed on the GO surface with HSA is plausible while the reverse process is less likely to occur. This study revealed that albumin might extend the blood circulation time of GO by replacing opsonins (IgG).

Physicochemical Targeting of Lipid Nanoparticles to the Lungs Induces Clotting: Mechanisms and Solutions

Lipid nanoparticles (LNPs) have become the dominant drug delivery technology in industry, holding the promise to deliver RNA to up- or down-regulate any protein of interest. LNPs have been targeted to specific cell types or organs by physicochemical targeting, in which LNP's lipid compositions are adjusted to find mixtures with the desired tropism. In a popular approach, physicochemical targeting is accomplished by formulating with charged lipids. Negatively charged lipids localize LNPs to the spleen, and positively charged lipids to the lungs. Here we found that lung-tropic LNPs employing cationic lipids induce massive thrombosis. We demonstrate that thrombosis is induced in the lungs and other organs, and greatly exacerbated by pre-existing inflammation. This clotting is induced by a variety of formulations with cationic lipids, including LNPs and non-LNP nanoparticles. The mechanism depends on the LNPs binding to fibrinogen and inducing platelet and thrombin activation. Based on these mechanisms, we engineered multiple solutions which enable positively charged LNPs to target the lungs while not inducing thrombosis. Our findings implicate thrombosis as a major barrier that blood erects against LNPs with cationic components and illustrate how physicochemical targeting approaches must be investigated early for risks and re-engineered with a careful understanding of biological mechanisms.

A Comparison of Hemostatic Activities of Zeolite-Based Formulary Finishes on Cotton Dressings

The need for affordable effective prehospital hemostatic dressings to control hemorrhage has led to an increased interest in new dressing design approaches. Here we consider the separate components of fabric, fiber, and procoagulant nonexothermic zeolite-based formulations on design approaches to accelerated hemostasis. The design of the fabric formulations was based on incorporation of zeolite Y as the principal procoagulant, with calcium and pectin to adhere and enhance the activity. Unbleached nonwoven cotton when combined with bleached cotton displays enhanced properties related to hemostasis. Here, we compare sodium zeolite with ammonium zeolite formulated on fabrics utilizing pectin with pad versus spray-dry-cure and varied fiber compositions. Notably, ammonium as a counterion resulted in shorter times to fibrin and clot formation comparable to the procoagulant standard. The time to fibrin formation as measured by thromboelastography was found to be within a range consistent with modulating severe hemorrhage control. The results indicate a correlation between fabric add-on and accelerated clotting as measured by both time to fibrin and clot formation. A comparison between the time to fibrin formation in calcium/pectin formulations and pectin alone revealed an enhanced clotting effect with calcium decreasing by one minute the time to fibrin formation. Infra-red spectra were employed to characterize and quantify the zeolite formulations on the dressings.

Design, optimization and characterization of a novel antibacterial chitosan-based hydrogel dressing for promoting blood coagulation and full-thickness wound healing: A biochemical and biophysical study

The use of hydrogel dressings has become increasingly popular as a scaffold for skin tissue engineering. Herein, we have developed an innovative wound dressing using chitosan, fibrinogen, nisin, and EDTA as an effective antibacterial scaffold for wound treatment. The structural and functional characteristics of the hydrogel, including morphology, mechanical strength, drug encapsulation and release, swelling behaviors, blood coagulation, cytotoxicity, and antibacterial activity, were studied. Spectroscopic studies indicated that the attachment of chitosan to fibrinogen is associated with minimal change in its secondary structure; subsequently, at higher temperatures, it is expected to preserve fibrinogen's conformational stability. Mechanical and blood coagulation analyses indicated that the incorporation of fibrinogen into the hydrogel resulted in accelerated clotting and enhanced mechanical properties. Our cell studies showed biocompatibility and non-toxicity of the hydrogel along with the promotion of cell migration. In addition, the prepared hydrogel indicated an antibacterial behavior against both Gram-positive and Gram-negative bacteria. Interestingly, the in vivo data revealed enhanced tissue regeneration and recovery within 17 days in the studied animals. Taken together, the results obtained from in vitro and histological assessments indicate that this innovatively designed hydrogel shows good potential as a candidate for wound healing.

Formation and biological effects of protein corona for food-related nanoparticles

The rapid development of nanoscience and nanoengineering provides new perspectives on the composition of food materials, and has great potential for food biology research and applications. The use of nanoparticle additives and the discovery of endogenous nanoparticles in food make it important to elucidate in vivo safety of nanomaterials. Nanoparticles will spontaneously adsorb proteins during transporting in blood and a protein corona can be formed on the nanoparticle surface inside the human body. Protein corona affects the physicochemical properties of nanoparticles and the structure and function of proteins, which in turn affects a series of biological reactions. This article reviewed basic information about protein corona of food-related nanoparticles, elucidated the influence of protein corona on nanoparticles properties and protein structure and function, and discussed the effect of protein corona on nanoparticles in vivo. The effects of protein corona on nanoparticles transport, cellular uptake, cytotoxicity, and immune response were reviewed, and the reasons for these effects were also discussed. Finally, future research perspectives for food protein corona were proposed. Protein corona gives food nanoparticles a new identity, which makes proteins bound to nanoparticles undergo structural transformations that affect their recognition by receptors in vivo. It can have positive or negative impacts on cellular uptake and toxicity of nanoparticles and even trigger immune responses. Understanding the effects of protein corona have potential in evaluating the fate of the food-related nanoparticles, providing physicochemical and biological information about the interaction between proteins and foodborne nanoparticles. The review article will help to evaluate the safety of protein coronas formed on nanoparticles in food, and may provide fundamental information for understanding and controlling nanotoxicity.

The Impact of Multiple Functional Layers in the Structure of Magnetic Nanoparticles and Their Influence on Albumin Interaction

In nanomedicine, hybrid nanomaterials stand out for providing new insights in both the diagnosis and treatment of several diseases. Once administered, engineered nanoparticles (NPs) interact with biological molecules, and the nature of this interaction might directly interfere with the biological fate and action of the NPs. In this work, we synthesized a hybrid magnetic nanostructure, with antibacterial and antitumoral potential applications, composed of a magnetite core covered by silver NPs, and coated with a modified chitosan polymer. As magnetite NPs readily oxidize to maghemite, we investigated the structural properties of the NPs after addition of the two successive layers using Mössbauer spectroscopy. Then, the structural characteristics of the NPs were correlated to their interaction with albumin, the major blood protein, to evidence the consequences of its binding on NP properties and protein retention. Thermodynamic parameters of the NPs–albumin interaction were determined. We observed that the more stable NPs (coated with modified chitosan) present a lower affinity for albumin in comparison to pure magnetite and magnetite/silver hybrid NPs. Surface properties were key players at the NP–biological interface. To the best of our knowledge, this is the first study that demonstrates a correlation between the structural properties of complex hybrid NPs and their interaction with albumin.

Construction and Application of EGCG-Loaded Lysozyme/Pectin Nanoparticles for Enhancing the Resistance of Nematodes to Heat and Oxidation Stresses

Novel nanoparticles (NPs) were constructed with lysozyme (LY) and pectin (Ps) through self-assembly, which were used as a carrier to encapsulate epigallocatechin-3-gallate (EGCG). The binding of EGCG and LY is a static quenching process. Hydrogen bonds might play a major role in the formation of NPs, which has also been verified by a lower binding constant of EGCG with LY/Ps NPs. Meanwhile, EGCG could lead to conformational and microenvironmental changes of LY, resulting in more folding of LY secondary structures. In addition, attaching Ps to LY might inhibit LY aggregation induced by addition of free EGCG. At the LY/Ps mass ratio of 1:1, the constructed LY/Ps NPs had a high EGCG-loading capacity without a significant change in mean particle size, thus, our NPs could be used as an effective nanocarrier for loading EGCG. In vivo, compared with free EGCG, EGCG loaded onto LY/Ps NPs significantly increased Caenorhabditis elegans’ (C. elegans) resistance to heat stress and oxidative injury and prolonged their lifespan. This study provides theoretical basis and reference for constructing nanoactive substance carriers so as to improve the resistance of organisms to heat stress and oxidative damage and to increase their survival rate and extend their lifespan under environment stresses.

Interdependency of influential parameters in therapeutic nanomedicine

Introduction:Current challenges to successful clinical translation of therapeutic nanomedicine have discouraged many stakeholders, including patients. Significant effort has been devoted to uncovering the reasons behind the less-than-expected success, beyond failures or ineffectiveness, of therapeutic nanomedicine products (e.g. cancer nanomedicine). Until we understand and address the factors that limit the safety and efficacy of NPs, both individually and in combination, successful clinical development will lag.Areas covered:This review highlights the critical roles of interdependent factors affecting the safety and therapeutic efficacy of therapeutic NPs for drug delivery applications.Expert opinion:Deep analysis of the current nanomedical literature reveals ahistory of unanticipated complexity by awide range of stakeholders including researchers. In the manufacture of nanomedicines themselves, there have been persistent difficulties with reproducibility and batch-to-batch variation. The unanticipated complexity and interdependency of nano-bio parameters has delayed our recognition of important factors affecting the safety and therapeutic efficacy of nanomedicine products. These missteps have had many factors including our lack of understanding of the interdependency of various factors affecting the biological identity and fate of NPs and biased interpretation of data. All these issues could raise significant concern regarding the reproducibility- or even the validity- of past publications that in turn formed the basis of many clinical trials of therapeutic nanomedicines. Therefore, the individual and combined effects of previously overlooked factors on the safety and therapeutic efficacy of NPs need to be fully considered in nanomedicine reports and product development.

Molecular Modeling of Protein Corona Formation and Its Interactions with Nanoparticles and Cell Membranes for Nanomedicine Applications

The conformations and surface properties of nanoparticles have been modified to improve the efficiency of drug delivery. However, when nanoparticles flow through the bloodstream, they interact with various plasma proteins, leading to the formation of protein layers on the nanoparticle surface, called protein corona. Experiments have shown that protein corona modulates nanoparticle size, shape, and surface properties and, thus, influence the aggregation of nanoparticles and their interactions with cell membranes, which can increases or decreases the delivery efficiency. To complement these experimental findings and understand atomic-level phenomena that cannot be captured by experiments, molecular dynamics (MD) simulations have been performed for the past decade. Here, we aim to review the critical role of MD simulations to understand (1) the conformation, binding site, and strength of plasma proteins that are adsorbed onto nanoparticle surfaces, (2) the competitive adsorption and desorption of plasma proteins on nanoparticle surfaces, and (3) the interactions between protein-coated nanoparticles and cell membranes. MD simulations have successfully predicted the competitive binding and conformation of protein corona and its effect on the nanoparticle-nanoparticle and nanoparticle-membrane interactions. In particular, simulations have uncovered the mechanism regarding the competitive adsorption and desorption of plasma proteins, which helps to explain the Vroman effect. Overall, these findings indicate that simulations can now provide predications in excellent agreement with experimental observations as well as atomic-scale insights into protein corona formation and interactions.

Anti-Platelet Effect Induced by Iron Oxide Nanoparticles: Correlation with Conformational Change in Fibrinogen

Iron oxide nanoparticles are developed for various biomedical applications, however, there is limited understanding regarding their effects and toxicity on blood components. The particles traveling in circulation inevitably interact with blood cells and plasma proteins and may interfere with hemostasis. Specifically, this study focuses on the influence of superparamagnetic iron oxide nanoparticles (SPIONs) coated with a biocompatible polymer, polyvinyl alcohol (PVA), on platelet function. Here, engineered SPIONs that are functionalized with various PVA coatings to provide these particles with different surface charges and polymer packing are described. These formulations are assessed for any interference with human platelet functions and coagulation, ex vivo. Positively charged SPIONs induce a significant change in platelet GPIIb-IIIa conformation, indicative of platelet activation at the dose of 500 µg mL^-1 . Remarkably, engineered PVA(polyvinyl alcohol)-SPIONs all display a robust dose-dependent anti-platelet effect on platelet aggregation, regardless of the PVA charge and molecular weight. After assessing hypotheses involving SPION-induced steric hindrance in platelet-platelet bridging, as well as protein corona involvement in the antiplatelet effect, the study concludes that the presence of PVA-SPIONs induces fibrinogen conformational change, which correlates with the observed dose-dependent anti-platelet effect.

Lysozyme Adsorption on Porous Organic Cages: A Molecular Simulation Study

Recently, porous organic cages (POCs) have emerged as a novel porous material with many merits and are widely utilized in many application fields. In this work, for the first time, molecular dynamics simulations were performed to investigate the mechanism of lysozyme adsorption onto the CC3 crystal, a kind of widely studied POC material. The simulation results show that lysozyme adsorbs onto the surface of CC3 with "top end-on," "back-on," or "side-on" orientations. It is found that the van der Waals interaction is the primary contribution to the binding; the conformation of the lysozyme is well preserved during the adsorption process. This provides some evidence for its biocompatibility and feasibility in biorelated applications. Arginine plays an important role in mediating the adsorption through nonpolar aliphatic chains. More importantly, the distribution and structure of the water layer on the POC surface has a significant impact on adsorption. This study provides insights into the development of POC materials with defined morphologies for the adsorption of biomolecules and may help the rational design of biorelated systems.

Interaction of fibrinogen-magnetic nanoparticle bioconjugates with integrin reconstituted into artificial membranes

Magnetic nanoparticles have a broad spectrum of biomedical applications including cell separation, diagnostics and therapy. One key issue is little explored: how do the engineered nanoparticles interact with blood components after injection? The formation of bioconjugates in the bloodstream and subsequent reactions are potentially toxic due to the ability to induce an immune response. The understanding of the underlying processes is of major relevance to design not only efficient, but also safe nanoparticles for e.g. targeted drug delivery applications. In this study, we report on maghemite nanoparticles functionalized with citrate-, dextran- and polyethylene glycol coatings and their interaction with the clotting protein fibrinogen. Further, we investigate using biophysical tools (e.g. dynamic light scattering, circular dichroism spectroscopy and quartz crystal microbalance) the interaction of the magnetic nanoparticles-fibrinogen bioconjugates with artificial cell membranes as a model system for blood platelets. We found that fibrinogen corona formation provides colloidal stability to maghemite nanoparticles. In addition, bioconjugates of fibrinogen with dextran- and citrate-coated NPs interact with integrin-containing lipid bilayer, especially upon treatment with divalent ions, whereas PEG-coating reveals minor interaction. Our study at the interface of protein-conjugated nanoparticles and artificial cell membranes is essential for engineering safe nanoparticles for drug delivery applications.

The role of human serum and solution chemistry in fibrinogen peptide-nanoparticle interactions

In living systems, the biomolecules that coat nanoparticles (NPs) alter the NP biological identity and response. Although some biomolecules are more effective in mediating NP stability or biological fate, it is difficult to monitor an individual biomolecule within the complexity of the biota. To understand the dependence of protein-NP interactions on common variations in blood, we have evaluated binding between silica NPs and a model gamma-fibrinogen (GF) peptide. Fibrinogen is commonly identified within the protein corona fingerprint of human serum, but its abundance on the NP varies. To assess the relative importance of human serum and solution conditions, GF peptide and silica NP interactions were evaluated with and without serum across pH, NaCl concentrations, and glucose concentrations. Initial evaluation of the GF peptide and silica NP complexes using circular dichroism and dynamic light scattering show little change in the secondary structure of the peptide and no significant agglomeration of NPs, suggesting peptide-NP complexes are stable across study conditions. Fluorescence anisotropy was used to monitor GF peptide-NP binding. Both with and without serum, binding constants for the gamma-fibrinogen peptide vary significantly upon addition of diluted HS (1:500) and 29 mM sodium chloride. Yet, results indicated that gamma-fibrinogen binding interactions with silica NPs are comparatively insensitive to physiologically relevant pH changes and dramatic increases in glucose concentrations. Results highlight the importance of blood chemistries, which vary across individuals and disease states, in mediating protein corona formation.

Towards osteogenic differentiation of human dental pulp stem cells on PCL-PEG-PCL/zeolite nanofibrous scaffolds

Presently, tissue engineering has been developed as an effective option in the restoration and repair of tissue defects. One of the tissue engineering strategies is to use both biodegradable scaffolds and stimulating factors for enhancing cell responses. In this study, the effect of zeolite was assessed on cell viability, proliferation, osteo/odontogenic differentiation, and mineralization of human dental pulp stem cells (hDPSCs) cultured on poly (ε-coprolactone) - poly (ethylene glycol)-poly (ε-caprolactone) (PCL-PEG-PCL) nanofibers. For this purpose, PCL-PEG-PCL nanofibrous scaffolds incorporated with zeolite were prepared via electrospinning. Both PCL-PEG-PCL and PCL-PEG-PCL/Zeolite nanofibrous scaffolds revealed bead-less constructions with average diameters of 430 nm and 437 nm, respectively. HDPSCs were transferred to PCL-PEG-PCL nanofibrous scaffolds containing zeolite nanoparticles. Cell adhesion and proliferation of hDPSCs and their osteo/odontogenic differentiation on these scaffolds were evaluated using MTT assay, Alizarin red S staining, and qRT-PCR assay. The results revealed that PCL-PEG-PCL/Zeolite nanofibrous scaffolds could support better cell adhesion, proliferation and osteogenic differentiation of hDPSCs and as such is expected to be a promising scaffold for bone tissue engineering applications.