Effects of poling and crystallinity on the dielectric properties of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 at cryogenic temperatures

Origins of the large piezoelectric response of samarium-doped lead magnesium niobate-lead titanate ceramics

The recent discovery of the large piezoelectric response of Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) ceramics induced by samarium doping has provided a substantially improved functionality to the group of lead-based relaxor-ferroelectric materials. Different mechanisms have been so far proposed for the large piezoelectricity; however, the explanations are contradictory and focused on a unified description. Here, we use nonlinear harmonic piezoelectric measurements combined with multiscale structural analysis to clarify the origins of the ultrahigh piezoelectric response of samarium-doped PMN-PT. Our methodological approach allowed us to separate the multiple piezoelectric contributions, revealing their quantitative role in the total response. The results show that the ultrahigh piezoelectricity cannot be attributed to a single mechanism but is rather a complex combination of different contributions originating from the multiple effects of samarium doping on the long- and short-range structure of PMN-PT. The study offers a baseline for future engineering of the key material parameters affecting the large piezoelectric response of relaxor-ferroelectric ceramics.

Temperature-Dependent Ferroelectric Properties and Aging Behavior of Freeze-Cast Bismuth Ferrite-Barium Titanate Ceramics

Lead-free BiFeO3-BaTiO3 (BF-BT) piezoceramics have sparked considerable interest in recent years due to their high piezoelectric performance and high Curie temperature. In this paper, we show how the addition of highly aligned porosity (between 40 and 60 vol %) improves the piezoelectric performance, sensing, and energy harvesting figures of merit in freeze-cast 0.70BiFeO3-0.30BaTiO3 piezoceramics compared to conventionally processed, nominally dense samples of the same composition. The dense and porous BF-BT ceramics had similar longitudinal piezoelectric coefficients (d33) immediately after poling, yet the dense samples were observed to age faster than those of porous ceramics. After 24 h, for example, the porous samples had significantly higher d33 values ranging from 112 to 124 pC/N, compared to 85 pC/N for the dense samples. Porous samples exhibited 3 and 5 times higher longitudinal piezoelectric voltage coefficient g33 and energy harvesting figure of merit d33g33 than dense samples due to the unexpected increase in d33 and decrease in relative permittivity with porosity. Spontaneous polarization (Ps) and remnant polarization (Pr) decrease as the porosity content increased from 37 to 59 vol %, as expected due to the lower volume of active material; however, normalized polarization values with respect to porosity level showed a slight increase in the porous materials relative to the dense BF-BT. Furthermore, the porous ceramics showed improved temperature-dependent strain-field response compared to the dense. As a result, these porous materials show excellent potential for use in high temperature sensing and harvesting applications.