The effects of magnetic treatment on nitrogen absorption and distribution in seedlings of Populus × euramericana 'Neva' under NaCl stress

Irrigation with Magnetized Water Alleviates the Harmful Effect of Saline-Alkaline Stress on Rice Seedlings

Saline–alkaline stress suppresses rice growth and threatens crop production. Despite substantial research on rice’s tolerance to saline–alkaline stress, fewer studies have examined the impact of magnetic water treatments on saline–alkaline-stressed rice plants. We explored the physiological and molecular mechanisms involved in saline–alkaline stress tolerance enhancement via irrigation with magnetized water using Nipponbare. The growth of Nipponbare plants was inhibited by saline–alkaline stress, but this inhibition was alleviated by irrigating the plants with magnetized water, as evidenced by greater plant height, biomass, chlorophyll content, photosynthetic rates, and root system in plants irrigated with magnetized water compared to those irrigated with non-magnetized water. Plants that were irrigated with magnetized water were able to acquire more total nitrogen. In addition, we proved that rice seedlings irrigated with magnetized water had a greater root NO₃⁻-nitrogen concentration and root NH₄⁺-nitrogen concentration than plants irrigated with non-magnetized water. These findings suggest that treatment with magnetized water could increase nitrogen uptake. To test this hypothesis, we analyzed the expression levels of genes involved in nitrogen acquisition. The expression levels of OsNRT1;1, OsNRT1;2, OsNRT2;1, OsAMT1;2, OsAMT2;1, OsAMT2;2, OsAMT2;3, OsAMT3;1, OsAMT3;2, and OsAMT3;3 were higher in plants exposed to magnetized water medium compared to those exposed to non-magnetized water media. We further demonstrated that treatment with magnetized water increases available nitrogen, NO₃⁻-nitrogen content, and NH₄⁺-nitrogen content in soil under saline–alkaline stress. Our results revealed that the increased resistance of rice seedlings to saline–alkaline stress may be attributable to a very effective nitrogen acquisition system enhanced by magnetized water.

Nitrogen sources affected the biosynthesis of 2-acetyl-1-pyrroline, cooked rice elongation and amylose content in rice

Many studies have been carried out on N sources effect on fragrant rice; however, their impact on rice grain quality is largely unclear. In this study, we evaluated the effects of different types of N sources on rice growth, yield, 2-acetyl-1-pyrroline (2AP), amylose and cooked rice elongation. Two indica rice cultivars, Basmati 385 (B385), Xiangyaxiangzhan (XYXZ) and two japonica cultivars, Yunjingyou (YJY), Daohuaxiang (DHX) were grown in experimental pots with six replications under four N sources: Potassium nitrate (KNO3), ammonium bicarbonate (NH4HCO3), urea (H2NCONH2) and sodium nitrate (NaNO3) in 2019 and 2020 early seasons. Our results showed that N dynamics regulated the number of panicles, 1000-grain weight, grain yield, 2-acetyl-1-pyrroline, amylose and cooked rice elongation across all the four treatments. The NH4HCO3 treatment significantly increased the number of panicles and grain yield across the four rice varieties compared with KNO3, H2NCONH2 and NaNO3 N sources in both 2019 and 2020 early season, The KNO3 treatment significantly showed higher 1000-grain weight in B-385, YJY, XYXZ and DHX compared to other N sources. Compared with other N sources treatment, the NH4HCO3 treatments significantly increased the 2AP contents in heading stage leaves, matured leaves and grains of B-385, YJY, XYXZ and DHX respectively. Cooked rice elongation percentage also showed significant difference in all treatments studied with KNO3 recorded the highest across the four varieties. Analysis of major enzymes and compounds such as P5C, P5CS, PDH, Pyrroline, proline and Methylglyoxal showed remarkable differences in each cultivar at heading and maturity stages with higher activity in NH4HCO3 and H2NCONH2 treatments. Similarly, in all treatments, we also observed significant increase in amylose content percentage, with NH4HCO3 having greater percentage of amylose.

Improved salt tolerance of Chenopodium quinoa Willd. contributed by Pseudomonas sp. strain M30-35

Background

Plant-growth-promoting rhizobacteria (PGPR) can promote plant growth and enhance plant tolerance to salt stress. Pseudomonas sp. strain M30-35 might confer abiotic stress tolerance to its host plants. We evaluated the effects of M30-35 inoculation on the growth and metabolite accumulation of Chenopodium quinoa Willd. during salt stress growth conditions.

Methods

The effects of M30-35 on the growth of C. quinoa seedlings were tested under salt stress. Seedling growth parameters measured included chlorophyll content, root activity, levels of plant- phosphorus (P), and saponin content.

Results

M30-35 increased biomass production and root activity compared to non-inoculated plants fertilized with rhizobia and plants grown under severe salt stress conditions. The photosynthetic pigment content of chlorophyll a and b were higher in M30-35-inoculated C. quinoa seedlings under high salt stress conditions compared to non-inoculated seedlings. The stability of P content was also maintained. The content of saponin, an important secondary metabolite in C. quinoa, was increased by the inoculation of M30-35 under 300 mM NaCl conditions.

Conclusion

Inoculation of M30-35 rescues the growth diminution of C. quinoa seedlings under salt stress.

Melatonin Enhances Drought Tolerance by Regulating Leaf Stomatal Behavior, Carbon and Nitrogen Metabolism, and Related Gene Expression in Maize Plants

It is commonly known that exogenously applied melatonin can alleviate the impact of drought stress, but the mechanism used by melatonin to regulate stomatal behavior and carbon (C) and nitrogen (N) metabolism to increase drought resistance remains elusive. Herein, our aim was to investigate the influence of exogenous melatonin on the regulation of C and N metabolism in maize plants under water deficit. In this study, we analyzed stomatal behavior, the key components of C and N metabolism, and the gene expression and activity of enzymes involved in the C and N metabolism in maize plants. The results showed that the application of melatonin (100 μM) significantly increased maize growth and sustained the opening of stomata, and secondarily increased the photosynthetic capacity in maize. Under drought stress, foliar application of melatonin induced the gene transcription and activities of sucrose phosphate synthetase, ADP-glucose pyrophosphorylase, phosphoenolpyruvate carboxylase, and citrate synthase, resulting in the enhancement of sucrose and starch synthesis and the tricarboxylic acid (TCA) cycle. This enhancement in sugar biosynthesis and the TCA cycle might lead to stronger N assimilation. As anticipated, NO₃ ^- reduction and NH₄ ⁺ assimilation were also strengthened after melatonin treatment under drought stress. An increase was observed in some key enzymatic activities and transcription involved in nitrogen metabolism, such as that of nitrate reductase, nitrite reductase, glutamate synthase, and glutamine synthetase, in melatonin-treated, drought-stressed maize. Moreover, melatonin attenuated the drought-induced damage by reducing protein degradation and increasing the level of proline. Conclusively, our results indicate that exogenous melatonin enhances drought tolerance in maize via promoting stomatal opening and regulating C and N metabolism and related gene expression.

Preparation of Wood-Based Panel Composites with Poplar Veneer as the Surface Layer Modified by In-Situ Polymerization of Active Monomers

Wood-based panels covered by melamine-impregnated paper are widely used in floors and furniture, due to its good surface texture, hardness, wear resistance, and waterproof function. However, there are still some problems, such as formaldehyde release from the impregnated resin, non-wood touch, and complex preparation processes. Therefore, this study designed glycidyl methacrylate (GMA) and ethyleneglycol dimethacrylate (EGDMA), combined with maleic anhydride (MAN) as a reactive catalyst, to build an active monomers system. It was first impregnated into poplar veneers, and then in-situ polymerized within the veneer using a hot pressing process, which realized the gluing of the veneer onto the wood-based panel substrate, synchronously. Such treatment aims to obtain wood-based panel composites decorated by the modified veneer, with real solid wood touch feeling, satisfied surface properties, and environment friendly glue bonding. The results indicated that the optimized reaction ratio of the active monomers (GMA:EGDMA) was 2:1 (molar ratio), and the maleic anhydride addition accounted for 6 wt.% of the total monomers. Under the optimized hot pressing condition, the modified veneer closely bonded to the wood-based panel substrate without obvious interfacial gaps. The hardness, abrasion resistance, modulus of rupture, and water resistance of the composites were significantly improved. Such results indicate that the treatment realized the perfect merging of solid wood touch feeling, environment friendly feature, and excellent properties of the composite. It was highly expected to replace the traditional melamine-impregnated paper to decorate wood-based panels, and could be potentially applied as surface decorating materials in wide areas of desktop, floor, cupboard, wardrobe, and so on.

Cell Wall Bulking by Maleic Anhydride for Wood Durability Improvement

Wood is susceptible to swelling deformation and decay fungi due to moisture adsorption that originates from the dynamic nanopores of the cell wall and the abundant hydroxyl groups in wood components. This study employed as a modifier maleic anhydride (MAn), with the help of acetone as solvent, to diffuse into the wood cell wall, bulk nanopores, and further chemically bond to the hydroxyl groups of wood components, reducing the numbers of free hydroxyl groups and weakening the diffusion of water molecules into the wood cell wall. The derived MAn-bulked wood, compared to the control wood, presented a reduction in water absorptivity (RWA) of ~23% as well as an anti-swelling efficiency (ASE) of ~39% after immersion in water for 228 h, and showed an improvement in decay resistance of 81.42% against white-rot fungus and 69.79% against brown-rot fungus, respectively. The method of combined cell wall bulking and hydroxyl group bonding could effectively improve the dimensional stability and decay resistance with lower doses of modifier, providing a new strategy for wood durability improvement.