Improving the anti-fouling property and permeate flux of hollow fiber composite nanofiltration membrane using β-cyclodextrin

Cyclodextrin-modified PVDF membranes with improved anti-fouling performance

The design of hydrophilic polyvinylidene fluoride (PVDF) membranes with anti-fouling properties has been explored for decades. Surface modification and blending are typical strategies to tailor the hydrophilicity of PVDF membranes. Herein, cyclodextrin was used to improve the antifouling performance of PVDF membranes. Cyclodextrin-modified PVDF membranes were prepared by coupling PVDF amination (blending with branched polyethyleneimine) and activated cyclodextrin grafting. The blending of PEI in the PVDF casting solution preliminarily aminated the PVDF, resulting in PEI-crosslinked/grafted PVDF membranes after phase inversion. Aldehydes groups on cyclodextrin, introduced by oxidation, endow cyclodextrin to be grafted on the aminated PVDF membrane by the formation of imines. Borch reduction performed on the activated cyclodextrin-grafted PVDF membrane converted the imine bonds to secondary amines, ensuring the membrane stability. The resulting membranes possess excellent antifouling performance, with a lower protein adsorption capacity (5.7 μg/cm2, indicated by Bovine Serum Albumin (BSA)), and a higher water flux recovery rate (FRR = 96%). The proposed method provides a facial strategy to prepare anti-fouling PVDF membranes.

Tailoring the performance of composite PEI nanofiltration membranes via incorporating activated cyclodextrins

Cyclodextrins (CDs) with unique cavity structures have been used as materials for nanofiltration membrane fabrications. In the present work, the activated CD (O-CD), oxidated by NaIO4, and polyethyleneimine (PEI) were co-deposited on a hydrolyzed polyacrylonitrile support, post-treated by glycerol protection and heating treatment, to prepare nanofiltration membranes with low molecular weight cut-off (MWCO). As the cavities in CD present and the aldehyde groups introduced after oxidation, the O-CDs were expected to crosslink the PEI layer and provide extra permeating channels. The filtration experiments showed that the incorporation of O-CDs improved the permeances of the O-CD-PEI/HPAN nanofiltration membranes. The performance can be tailored by the control of the loading or the oxidation degree of the O-CD. At optimal conditions, the permeance increment was nearly double (from 9.2 to 21.1 Lm-2·h-1·bar-1). While the selectivity was without significant sacrifice, the rejection of PEG 200 remained around 90%. Meanwhile, the membrane stability was demonstrated by pro-longed filtratiing a PEG 200 aqueous solution. The constant permeance and rejection confirmed the O-CD-PEI/HPAN membranes were stable. The incorporation of activated CD in PEI offers a facile strategy to promote the permeance of PEI-based membranes.

Solar-driven desalination using salt-rejecting plasmonic cellulose nanofiber membrane

Solar-driven steam generation is a promising, renewable, effective, and environment-friendly technology for desalination and water purification. However, steam generation from seawater causes severe salt formation on the photothermal material, which hinders long-term and large-scale practical applications. In this study, we develop salt-rejecting plasmonic cellulose-based membranes (CMNF-NP) composed of an optimized ratio of Au/Ag nanoparticles, cellulose micro/nanofibers, and polyethyleneimine for efficient solar-driven desalination. The CMNF-NP exhibits a water evaporation rate of 1.31 kg m^-2h^-1 (82.1% of solar-to-vapor conversion efficiency) for distilled water under 1-sun. The CMNF-NP shows a comparable evaporation rate for 3.5 wt% brine, which has been maintained for 10 h; the evaporation rate of the filter paper-based counterpart severely decreases because of salt-scaling. The efficient salt-rejecting capability of the CMNF-NP membrane is attributed to the compact structure and electrostatic repulsion of cationic ions of salt that originate from cellulose nanofibers and the amine-functionalized polymer, polyethyleneimine, as a structural binder. This simple fabrication method of casting the CMNF-NP solution on the substrate followed by drying allows a facile coating of a highly efficient and salt-rejecting photothermal membrane on various practical substrates.

Intrinsically Stretchable and Printable Lithium-Ion Battery for Free-Form Configuration

For next-generation wearable and implantable devices, energy storage devices should be soft and mechanically deformable and easily printable on any substrate or active devices. Herein, we introduce a fully stretchable lithium-ion battery system for free-form configurations in which all components, including electrodes, current collectors, separators, and encapsulants, are intrinsically stretchable and printable. The stretchable electrode acquires intrinsic stretchability and improved interfacial adhesion with the active materials via a functionalized physically cross-linked organogel as a stretchable binder and separator. Intrinsically stretchable current collectors are fabricated in the form of nanocomposites consisting of a matrix with excellent barrier properties without swelling in organic electrolytes and nanostructure-controlled multimodal conductive fillers. Due to structural and materials freedoms, we successfully fabricate several types of stretchable lithium-ion battery that reliably operates under various stretch deformations with capacity and rate capability comparable with a nonstretchable battery over 2.5 mWh cm^-2 at 0.5 C, even under high mass loading conditions over 10 mg cm^-2, including stacked configuration, direct integration on both sides of a stretch fabric, and application of various electrode materials and electrolytes. Especially, our stretchable battery printed on a stretch fabric also exhibits high performance and stretch/long-term stabilities in the air even with wearing and pulling.

A supramolecular thermosensitive gel of ketoconazole for ocular applications: In silico, in vitro, and ex vivo studies

The incidence of corneal fungal infections continues to be a growing concern worldwide. Ocular delivery of anti-fungal drugs is challenging due to the anatomical and physiological barriers of the eye. The ocular bioavailability of ketoconazole (KTZ), a widely prescribed antifungal agent, is hampered by its limited aqueous solubility and permeation. In the study, the physicochemical properties of KTZ were improved by complexation with sulfobutylether-β-cyclodextrin (SBE-β-CD).KTZ-SBE-β-CD complex was studied in silico with docking and dynamics simulations, followed by wet-lab experiments.The optimized KTZ-SBE-β-CD complex was loaded into a thermosensitivein situ gel to increase corneal bioavailability. The supramolecular complex increased the solubility of KTZ by 5-folds and exhibited a 10-fold increment in drug release compared to the pure KTZ. Owing to the diffusion, thein situ gel exhibited a more sustained drug release profile. Theex vivocorneal permeation studies showed higher permeation from KTZ-SBE-β-CD in situ gel (flux of ∼19.11 µg/cm²/h) than KTZin situ gel (flux of ∼1.17 µg/cm²/h). The cytotoxicity assays and the hen's egg chorioallantoic membrane assay (HET-CAM) confirmed the formulations' safety and non-irritancy. In silico guided design of KTZ-SBE-β-CD inclusion complexes successfully modified the physicochemical properties of KTZ. In addition, the loading of the KTZ-SBE-β-CD complex into an in situ gel significantly increased the precorneal retention and permeation of KTZ, indicating that the developed formulation is a viable modality to treat fungal keratitis.

Sharpening Nanofiltration: Strategies for Enhanced Membrane Selectivity

Nanofiltration plays an increasingly large role in many industrial applications, such as water treatment (e.g., desalination, water softening, and fluoride removal) and resource recovery (e.g., alkaline earth metals). Energy consumption and benefits of nanofiltration processes are directly determined by the selectivity of the nanofiltration membranes, which is largely governed by pore-size distribution and Donnan effects. During operation, the separation performance of unmodified nanofiltration membranes will also be impacted (deleteriously) upon unavoidable membrane fouling. Many efforts, therefore, have been directed toward enhancing the selectivity of nanofiltration membranes, which can be classified into membrane fabrication method improvement and process intensification. This review summarizes recent developments in the field and provides guidance for potential future approaches to improve the selectivity of nanofiltration membranes.