Targeted Drug Delivery of Microbubble to Arrest Abdominal Aortic Aneurysm Development: A Simulation Study Towards Optimized Microbubble Design

Delivery vehicles for light-mediated drug delivery: microspheres, microbots, and nanoparticles: a review

This review delves into the evolving landscape of mediated drug delivery, focusing on the versatility of a variety of drug delivery vehicles such as microspheres, microbots, and nanoparticles (NPs). The review also expounds on the critical components and mechanisms for light-mediated drug delivery, including photosensitizers and light sources such as visible light detectable by the human eye, ultraviolet (UV) light, shorter wavelengths than visible light, and near-infra-red (NIR) light, which has longer wavelength than visible light. This longer wavelength has been implemented in drug delivery for its ability to penetrate deeper tissues and highlighted for its role in precise and controlled drug release. Furthermore, this review discusses the significance of these drug delivery vehicles towards a spectrum of diverse applications spanning gene therapy, cancer treatment, diagnostics, and microsurgery, and the materials used in the fabrication of these vehicles encompassing polymers, ceramics, and lipids. Moreover, the review analyses the challenges and limitations of such drug delivery vehicles as areas of improvement to provide researchers with valuable insights for addressing current obstacles in the progression of drug delivery. Overall, this review underscores the potential of light-mediated drug delivery to revolutionise healthcare and personalised medicine, providing precise, targeted, and effective therapeutic interventions.

Investigation of the size and shape of nano-microcarriers for targeted drug delivery to atherosclerotic plaque in ischemic stroke prevention

Recognizing the significance of drug carriers in the treatment of atherosclerotic plaque is crucial in light of the worldwide repercussions of ischemic stroke. Conservative methodologies, specifically targeted drug delivery, present encouraging substitutes that mitigate the hazards linked to invasive procedures. With the intention of illuminating their considerable significance and prospective benefits, this study examines the impact of the geometry and dimensions of drug-loaded nano-microcarriers on atherosclerotic plaque. The research utilizes a finite element approach to simulate the motion and fluid dynamics of nano-microcarriers loaded with drugs within the carotid arteries. Carriers are available in a variety of shapes and sizes to accommodate patient-specific geometries, pulsatile fluid flow, and non-Newtonian blood properties. Optimization of drug delivery is achieved through the examination of carrier interaction with the inner wall. The results demonstrated that the interaction data between particles and the inner wall of atherosclerotic plaques exhibits micro- and nanoscale patterns that are distinct. Symmetric plaques demonstrate that nanoparticles with a 0.4 shape factor and diameters below 200 nm show the highest interaction rate. Conversely, larger particles (200 and 500 nm) with shape factors of 1 demonstrate comparatively elevated interaction rates. The optimal shape factor for drug-loaded microparticles has been determined to be one, and the number of interactions increases as the diameter of the nanoparticles increases, with a significant increase observed at a shape factor of one. Asymmetric plaques exhibit the maximum interaction rates among particles that have a shape factor of 0.4 and have diameters smaller than 500 µm. The findings establish a foundation for novel therapeutic strategies, establishing nano-microparticles as auspicious contenders for accurate and efficacious drug delivery systems that inhibit plaque proliferation.

Drug Delivery Angle for Various Atherosclerosis and Aneurysm Percentages of the Carotid Artery

Stroke is the second cause of mortality among adult males and the first cause of death in adult females all around the world. It is also recognized as one of the most important causes of morbidity and dementia in adults. Stenosis or rupture of the only channels of the blood supply from the heart to the brain (carotid arteries) is among the main causes of stroke. In this regard, treatment of the lesions of carotid arteries, including atherosclerosis and aneurysm, could be a huge step in preventing stroke and improving brain performance. Targeted drug delivery by drug-carrying nanoparticles is the latest method for optimal delivery of drug to the damaged parts of the artery. In this study, a wide range of carotid artery lesions, including different percentages of atherosclerosis and aneurysm, were considered. After analyzing the dynamics of the fluid flow in different damaged regions and selecting the magnetic framework with proper ligand (Fe3O4@MOF) as the drug carrier, the size of the particles and their number per cycle were analyzed. Based on the results, the particle size of 100 nm and the use of 300 particles per injection at each cardiac cycle can result in maximum drug delivery to the target site. Then, the effect of the hospital bed angle on drug delivery was investigated. The results showed a unique optimal drug delivery angle for each extent of atherosclerosis or aneurysm. For example, in a 50% aneurysm, drug delivery at an angle of 30° is about 387% higher than that at an angle of 15°. Finally, simulation of real geometry indicated the effectiveness of simple geometry instead of real geometry for the simulation of carotid arteries, which can remarkably decrease the computational time and costs.

In-silico study of drug delivery to atherosclerosis in the human carotid artery using metal-organic frameworks based on adhesion of nanocarriers

This study investigates nanocarriers (NCs) for drug delivery targeting carotid artery atherosclerosis. This targeted drug delivery mechanism is based on ligand-receptor bindings facilitated by coating NCs with P-selectin aptamers, which exhibit high affinities for P-selectin plaque receptors. Recognizing the significant advantages of metal-organic frameworks (MOFs), such as their high drug-loading percentages, we chose them as nanocarriers for this research. Our evaluation considers critical factors: NC surface density (the number of attached nanocarriers per unit of plaque area), toxicity (percentage of NCs missing the target), and efficient drug transfer to plaque tissue. Employing molecular dynamics (MD) for drug loading calculations via van der Waals interactions and computational fluid dynamics (CFD) for toxicity, surface density, and drug transfer assessments, we achieve a comprehensive analysis. A cardiac cycle-based metric guides optimal MOF release conditions, establishing an ideal dosage of 600 NCs per cycle. MOF-801 exhibits outstanding drug delivery performance, particularly in plaque targeting. While a magnetic field enhances NC adhesion, its impact on drug transfer is limited, emphasizing the need for further optimization in magnetic targeting for NC-based therapies. This study provides crucial insights into NC drug delivery performance in carotid artery atherosclerosis, advancing the field of targeted drug delivery for atherosclerosis treatment.

Targeted drug delivery in pulmonary therapy based on adhesion and transmission of nanocarriers designed with a metal-organic framework

With the recent increase in lung diseases, especially with the onset of the coronavirus pandemic, the design of a highly efficient and optimal targeted drug delivery system for the lungs is crucial in inhaler-based delivery systems. This study aimed to design a magnetic field-assisted targeted drug delivery system to the lungs using three types of metal-organic frameworks (MOFs) and nanoliposomes. The optimization of the system was based on three main parameters: the surface density of the nanocarriers' (NCs) adherence to each of the lung branches, the amount of drug transferred to each branch, and the toxicity based on the rate of nanocarrier delivery to the branches. The study investigated the effect of increasing the diameter of the drug carriers and the amount of drug loaded onto the NCs in improving drug delivery to targeted areas of the lung. Results showed that the presence of a magnetic field significantly increased the adhesion of NCs to the targeted branches. The application of a magnetic field and the type of drug carrier had a significant effect on drug delivery downstream of the lung and reduced drug toxicity. The study found that Fe3O4@UiO-66 (iron-oxide nanoparticle attached to the surface of UiO-66, a type of MOF) and Fe3O4@PAA/AuNCs/ZIF-8 carriers, (iron-oxide nanoparticle attached to a hybrid structure composed of three different materials: poly (acrylic acid) (PAA), gold nanoclusters (AuNCs), and zeolitic imidazolate framework-8 (ZIF-8)), had the greatest drug delivery rate in diameters above 200 nm and less than 200 nm, respectively.

The study on the impact of AAA wall motion on the hemodynamics based on 4D CT image data

Purpose: To analyze the effect of the physiological deformation of the vessel wall on the hemodynamics in the abdominal aortic aneurysm (AAA), this paper compared the hemodynamics in AAA based on the moving boundary (MB) simulation and the rigid wall (RW) simulation. Method: Patient-specific models were reconstructed to generate mesh based on four-dimensional computed tomography angiography (4D CT) data. The dynamic mesh technique was used to achieve deformation of the vessel wall, surface mesh and volume mesh of the fluid domain were successively remeshed at each time step. Besides, another rigid wall simulation was performed. Hemodynamics obtained from these two simulations were compared. Results: Flow field and wall shear stress (WSS) distribution are similar. When using the moving boundary method (MBM), mean time-averaged wall shear stress (TAWSS) is lower, mean oscillatory shear index (OSI) and mean relative residence time (RRT) are higher. When using the 10th and 20th percentile values for TAWSS and 80th and 90th percentile values for RRT, the ratios of areas with low TAWSS, high OSI and high RRT to the entire vessel wall are higher than those assuming the vessel as rigid. In addition, one overlapping region of low TAWSS, high OSI and high RRT by using the MBM is consistent with the location of thrombus obtained from the follow-up imaging data. Conclusion: The hemodynamics results by using the MBM reflect a higher blood retention effect. This paper presents a potential tool to assess the risk of intraluminal thrombus (ILT) formation based on the MBM.

Modeling of an Ultrasound System in Targeted Drug Delivery to Abdominal Aortic Aneurysm: A Patient-Specific in Silico Study Based on Ligand-Receptor Binding

Targeted drug delivery methods have shown a significant impact on enhancing drug delivery efficiency and reducing drug side effects. While various stimuli have been used to promote the drug delivery process, applying ultrasound (US) waves to control drug particles through the human body, noninvasively, has drawn the scientist's attention. However, microcarriers delivery reaches the aneurysmal artery by US waves that exert volumetric forces on blood, and drug carriers, which can therefore affect blood flow patterns and movement pathways of drug carriers, have not yet been studied. In this study, we developed a 3-D patient-specific model of abdominal aortic aneurysm (AAA) to evaluate the effect of US waves in enhancing the drug-containing microbubbles (MBs) adhered on the AAA lumen through ligand-receptor binding. Thus, a focused US (FUS) transducer with a resonance frequency of ~1.1 MHz was added to the geometry. Then, the surface density of MBs (SDM) adhered on the AAA lumen was calculated at peak acoustic pressure of ~1.1, ~2.2, and ~4.3 MPa. Results indicated that increasing the US pressure had a significant impact on improving the MBs adhered to the intended wall, whereby US waves with the maximum pressure of ~4.3 MPa could enhance ~1- [Formula: see text] MBs adhesion ~98% relative to not using the waves. While US waves have the advantage of more SDM adhered to the whole artery wall, they adversely affect the SDM adhered on the critical wall of the abdominal aorta. Furthermore, when the US strength goes up, a reduction occurs in the SDM adhered. This reduction is higher for smaller MBs, which is the mentioned MBs' size and US strength reduced SDM adhesion by about ~50% relative to systemic injection. Therefore, it can be concluded that drug delivery using the US field increases the SDM adhered to the whole AAA wall and decreases the SDM adhered to the critical wall of AAA.

Targeted drug delivery of magnetic microbubble for abdominal aortic aneurysm: an in silico study

Targeted drug delivery (TDD) to abdominal aortic aneurysm (AAA) using a controlled and efficient approach has recently been a significant challenge. In this study, by using magnetic microbubbles (MMBs) under a magnetic field, we investigated the MMBs performance in TDD to AAA based on the amount of surface density of MMBs (SDMM) adhered to the AAA lumen. The results showed that among the types of MMBs studied in the presence of the magnetic field, micromarkers are the best type of microbubble with a -[Formula: see text] increase in SDMM adhered to the critical area of AAA. The results show that applying a magnetic field causes the amount of SDMM adhered to the whole area of AAA to increase -[Formula: see text] times compared to the condition in which the magnetic field is absent. This optimal and maximum value occurs for Definity MMBs with - 3.3 μm diameter. Applying a magnetic field also increases the adhesion surface density by - [Formula: see text], - [Formula: see text], and -[Formula: see text] times for the Micromarker, Optison, and Sonovue microbubbles, respectively, relative to the condition in which the magnetic field is absent. It was shown that using MBBs under magnetic field has the best performance in delivery to AAA for patients with negative inlet blood flow. Also, we have exposed that in an efficient TDD to AAA using MMBs, decreasing the density of MMBs increases drug delivery efficiency and performance. When density is - [Formula: see text], there is the highest difference (about - 75%) between the SDMM adhered to AAA in the presence of a magnetic field and in the absence of a magnetic field.

Targeted pulmonary drug delivery in coronavirus disease (COVID-19) therapy: A patient-specific in silico study based on magnetic nanoparticles-coated microcarriers adhesion

Since the beginning of the COVID-19 pandemic, nearly most confirmed cases develop respiratory syndromes. Using targeted drug delivery by microcarriers is one of the most important noteworthy methods for delivering drugs to the involved bronchi. This study aims to investigate the performance of a drug delivery that applies microcarriers to each branch of the lung under the influence of a magnetic field. The results show that by changing the inlet velocity from constant to pulsatile, the drug delivery performance to the lungs increases by ∼31%. For transferring the microcarriers to the right side branches (LUL and LLL), placing the magnet at zero height and ∼30° angle yields the best outcome. Also, the microcarriers' delivery to branch LUL improves by placing the magnet at LUL-LLL bifurcation and the angle of ∼30°. It was observed that dense (9300[kgm³]) microcarriers show the best performance for delivering drugs to LLL and RLL&RML branches. Also, low-density (1000[kgm³]) microcarriers are best for delivering drugs to LUL and RUL branches. The findings of this study can improve our understanding of different factors, such as inlet velocity, the magnet's position, and the choice of microcarrier - that affect drug delivery to the infected parts of the lung.

Experimental Study on the Compatibility and Characteristics of a Dual-Target Microbubble Loaded with Anti-miR-33

Objective

To prepare a new type of dual-target microbubble loaded with anti-miR-33 (ANM33).

Methods

Carrier core nanobubbles (NBs) were prepared by thin film hydration, and microbubbles loaded with PM1 (PCNBs) were prepared by grafting DSPE-PEG2000-maleimide-PM1 onto the NB surface. ANM33 was connected via electrostatic adsorption and covalent bonding, and hyaluronic acid (HA) was covalently connected. PM1 and HA were the targets, and ANM33 was the intervention drug. To evaluate the general physical and chemical properties of the prepared dual-target microbubbles loaded with ANM33 (HA-PANBs), we observed their morphology, particle size and surface potential while monitoring their stability and in vitro imaging ability, evaluated their toxic effect on cells and verified their ability to target cells.

Results

HA-PANBs had a regular morphology and good stability. The average particle size measured by a Malvern potentiometer was 1421.75±163.23 nm, and the average surface potential was −5.51±1.87 mV. PM1 and ANM33 were effectively connected to the NBs. The PM1, ANM33, and HA binding reached 89.0±1.1%, 65.02±5.0%, and 61.4±3.5%, respectively, and the maximum binding reached 2 µg, 5 µg, and 7 µg/10⁸ microbubbles, respectively. HA-PANBs had no obvious toxic effects on cells, and their ability to continuously enhance imaging in vitro persisted for more than 15 minutes, obviously targeting foam cells in the early stage of AS.

Conclusion

HA-PANBs are ideal ultrasound contrast agents. The successful, firm connection of PM1 and HA to the NBs significantly increased the amount of carried ANM33. When microbubbles prepared with 2:4:7 PM1:ANM33:HA were used as a contrast agent, they had a high ANM33 carrying capacity, stable physical properties, and significantly enhanced imaging and targeting of foam cells in the early stage of AS.

Current Strategies for Microbubble-Based Thrombus Targeting: Activation-Specific Epitopes and Small Molecular Ligands

Microbubbles with enhanced ultrasound represent a potentially potent evolution to the administration of a free drug in the treatment of thrombotic diseases. Conformational and expressional changes of several thrombotic biological components during active coagulation provide epitopes that allow site-specific delivery of microbubble-based agents to the thrombus for theranostic purpose. Through the interaction with these epitopes, emerging high-affinity small molecular ligands are able to selectively target the thrombi with tremendous advantages over traditional antibody-based strategy. In this mini-review, we summarize recent novel strategies for microbubble-based targeting of thrombus through epitopes located at activated platelets and fibrin. We also discuss the challenges of current targeting modalities and supramolecular carrier systems for their translational use in thrombotic pathologies.

Nanoparticle-Assisted Diagnosis and Treatment for Abdominal Aortic Aneurysm

An abdominal aortic aneurysm (AAA) is a localized dilatation of the aorta related to the regional weakening of the wall structure, resulting in substantial morbidity and mortality with the aortic ruptures as complications. Ruptured AAA is a dramatic catastrophe, and aortic emergencies constitute one of the leading causes of acute death in older adults. AAA management has been centered on surgical repair of larger aneurysms to mitigate the risks of rupture, and curative early diagnosis and effective pharmacological treatments for this condition are still lacking. Nanoscience provided a possibility of more targeted imaging and drug delivery system. Multifunctional nanoparticles (NPs) may be modified with ligands or biomembranes to target agents' delivery to the lesion site, thus reducing systemic toxicity. Furthermore, NPs can improve drug solubility, circulation time, bioavailability, and efficacy after systemic administration. The varied judiciously engineered nano-biomaterials can exist stably in the blood vessels for a long time without being taken up by cells. Here, in this review, we focused on the NP application in the imaging and treatment of AAA. We hope to make an overview of NP-assisted diagnoses and therapy in AAA and discussed the potential of NP-assisted treatment.

The promising shadow of microbubble over medical sciences: from fighting wide scope of prevalence disease to cancer eradication

Microbubbles are typically 0.5-10 μm in size. Their size tends to make it easier for medication delivery mechanisms to navigate the body by allowing them to be swallowed more easily. The gas included in the microbubble is surrounded by a membrane that may consist of biocompatible biopolymers, polymers, surfactants, proteins, lipids, or a combination thereof. One of the most effective implementation techniques for tiny bubbles is to apply them as a drug carrier that has the potential to activate ultrasound (US); this allows the drug to be released by US. Microbubbles are often designed to preserve and secure medicines or substances before they have reached a certain area of concern and, finally, US is used to disintegrate microbubbles, triggering site-specific leakage/release of biologically active drugs. They have excellent therapeutic potential in a wide range of common diseases. In this article, we discussed microbubbles and their advantageous medicinal uses in the treatment of certain prevalent disorders, including Parkinson's disease, Alzheimer's disease, cardiovascular disease, diabetic condition, renal defects, and finally, their use in the treatment of various forms of cancer as well as their incorporation with nanoparticles. Using microbubble technology as a novel carrier, the ability to prevent and eradicate prevalent diseases has strengthened the promise of effective care to improve patient well-being and life expectancy.

Flow topology and targeted drug delivery in cardiovascular disease

Targeted drug delivery is a promising technique to direct the drug to the specific diseased region. Nanoparticles have provided an attractive approach for this purpose. In practice, the major focus of targeted delivery has been on targeting cell receptors. However, the complex fluid mechanics in diseased biomedical flows questions if a sufficient number of nanoparticles can reach the desired region. In this paper, we propose that hidden topological structures in cardiovascular flows identified with Lagrangian coherent structures (LCS) control drug transport and provide valuable information for optimizing targeted drug delivery efficiency. We couple image-based computational fluid dynamics (CFD) with continuum transport models to study nanoparticle transport in coronary artery disease. We simulate nanoparticle transport as well as the recently proposed shear targeted drug delivery system that couples micro-carriers with nanoparticle drugs. The role of the LCS formed near the stenosed artery in controlling drug transport is discussed. Our results motivate the design of smart micro-needles guided by flow topology, which could achieve optimal drug delivery efficiency.

Effect of Material and Population on the Delivery of Nanoparticles to an Atherosclerotic Plaque: A Patient-specific In Silico Study

Coronary artery disease (CAD) is the prevalent reason of mortality all around the world. Targeting CAD, specifically atherosclerosis, with controlled delivery of micro and nanoparticles, as drug carriers, is a very proficient approach. In this work, a patient-specific and realistic model of an atherosclerotic plaque in the left anterior descending (LAD) artery was created by image-processing of CT-scan images and implementing a finite-element mesh. Next, a fluid-solid interaction simulation considering the physiological boundary conditions was conducted. By considering the simulated force fields and particle-particle interactions, the correlation between injected particles at each cardiac cycle and the surface density of adhered particles over the atherosclerotic plaque (SDP) were examined. For large particles (800 and 1000 nm) the amount of SDP on the plaque increased significantly when the number of the injected particles became higher. However, by increasing the number of the injected particles, for the larger particles (800 and 1000 nm) the increase in SDP was about 50% greater than that of the smaller ones (400 and 600 nm). Furthermore, for constant number of particles, depending on their size, different trends in SDP were observed. Subsequently, the distribution and adhesion of metal-based nanoparticles including SiO₂, Fe₃O₄, NiO₂, silver and gold with different properties were simulated. The injection of metal particles with medium density among the considered particles resulted in the highest SDP. Remarkably, the affinity, the geometrical features, and the biophysical factors involved in the adhesion outweighed the effect of difference in the density of particles on the SDP. Finally, the consideration of the lift force in the simulations significantly reduced the SDP and consistently decreased the particle residence time in the studied domain.

Drug delivery performance of nanocarriers based on adhesion and interaction for abdominal aortic aneurysm treatment

Targeted drug delivery using nanocarriers (NCs) is one of the novel techniques that has recently been used to improve drug delivery to the Abdominal aortic aneurysm (AAA) disease. The purpose of this study is to evaluate the surface density of NCs (SDNC) adhered via ligand-receptor binding to the inner wall of AAA. For this purpose, fluid-structure interaction (FSI) analysis was first performed for the patient-specific and ideal AAA models. Then, by injecting NCs into the aortic artery, the values of SDNC adhered to and interacted with AAA wall were obtained. Two types of NCs, liposomes, and solid particles in four different diameters, were used to investigate the effect of the diameter and the type of NCs on the drug delivery. Additionally, the effect of the number of the injected NCs to the artery on the values of SDNC adhered to and interacted with AAA wall was investigated. The simulation results showed that the interaction and adhesion values of SDNC for Liposome nanoparticles were higher than the ones for the solid particles. Furthermore, as the diameter of NCs increases, the values of SDNC adhered to AAA wall increase, but the values of SDNC interacted with the inner wall of AAA decrease. In the low number of inserted NCs in the artery (1000 NCs), the interaction and adhesion values of SDNC were very slight, and by increasing the number of NCs inserted into the artery, the drug delivery was improved. By examining different AAA models, it was found that the complexity of the shape of AAA has a minor effect on the pattern of increase or decrease of the values of SDNC adhered to and interacted with AAA wall.This study's findings can improve the understanding of NCs design and propose the appropriate amount of their injection into various AAA models.

Recent progress on nanoparticles for targeted aneurysm treatment and imaging

An abdominal aortic aneurysm (AAA) is a localized dilatation of the aorta that plagues millions. Its rupture incurs high mortality rates (~80-90%), pressing an urgent need for therapeutic methods to prevent this deadly outcome. Judiciously designed nanoparticles (NPs) have displayed a unique potential to fulfill this need. Aneurysms feature excessive inflammation and extracellular matrix (ECM) degradation. As such, typically inflammatory cells and exposed ECM proteins have been targeted with NPs for therapeutic, diagnostic, or theranostic purposes in experimental models. NPs have been used not only for encapsulation and delivery of drugs and biomolecules in preclinical tests, but also for enhanced imaging to monitor aneurysm progression in patients. Moreover, they can be readily modified with various molecules to improve lesion targeting, detectability, biocompatibility, and circulation time. This review updates on the progress, limitations, and prospects of NP applications in the context of AAA.