High-order mode suppression in double-clad optical fibers by adding absorbing inclusions

Er-Doped Tapered Fiber Amplifier for High Peak Power Sub-ns Pulse Amplification

A tapered Er-doped fiber amplifier for high peak power pulses amplification has been developed and tested. The core diameter changed from 15.8 µm (mode field diameter (MFD) 14.5 µm) to 93 µm (MFD 40 µm) along 3.7 m maintaining single-mode performance at 1555 nm (according to the S2-method, the part of the power of high-order modes does not exceed 1.5%). The amplification of 0.9 ns pulses with spectral width below 0.04 nm up to a peak power above 200 kW (limited by self-phase modulation) with a slope pump-to-signal conversion efficiency of 15.6% was demonstrated.

Spectral filtering in single-mode fibers using resonant coupling with absorbing rods

We investigate (both theoretically and experimentally) a method for fundamental mode spectral filtering in single-mode optical fibers using the resonant mode coupling effect. We demonstrate the possibility of controlling the spectral bandwidth of the fundamental mode suppression band through appropriate choice of fiber parameters and fiber bending. The developed technique can be very useful for the design of fiber-based spectral filters (i.e., active fibers with suppression of laser emission at undesirable wavelengths, suppression of stimulated Raman scattering).