Potentially toxic metals in irrigation water, soil, and vegetables and their health risks using Monte Carlo models

Quality assessment of new constructed technosols: Key findings on their biogeochemical and environmental characteristics

Technosols might be of a great potential to be used for urban greening. Furthermore, this research intended to evaluate nine different technosol combinations and check for the best yielded results to implement in a large scale mesocosm. The application of such materials could significantly boost the circular economy by preserving natural soil and recycling the continuous flows of urban discharges such as construction and demolition wastes (CDW). However, such application cannot be carried out without biogeochemical, physical and agronomical characterization. The focus of the study was mainly on trace metals distribution and potential impacts. Results showed that concentrations of trace metals, of most tested mixes are within Italian standards. Therefore, the technosols are not phytotoxic. Regarding environmental and ecological risk, no metal contamination was found. However, the subsequent human health risk assessment revealed some concerns particularly with children's exposure to such materials with a high hazard index and cancer risk. While the results might be overestimated it is still advisable to apply the studied materials in urban areas (urban greening) with certain precautions. Nevertheless, for other applications, such as site rehabilitation, these materials might be appropriate.

Mercury poisoning in women and infants inhabiting the Gangetic plains of Bihar: risk assessment

Mercury is a persistent, bio-accumulative, and hazardous contaminant. When released into the environment, it accumulates in water sediments, converting it to poisonous methylmercury that enters the food chain. The present study was carried out in habitations from the 11 districts of Bihar (India). In the study, n = 224 lactating women and their infants n = 172 infants participated. After obtaining the written informed consent, their breast milk, urine, and blood were collected for mercury estimation. The breastmilk content was measured in n = 181 subjects, in which 74% women had their breastmilk higher than the WHO permissible limit (< 1.7 μg/L), while 26% of the women had their breast milk below the permissible limit. The blood mercury content showed that 19% subjects had mercury content above the permissible limit [20 μg/L]. In urine mercury estimation, 49% women had mercury content above the permissible limit [10 μg/L], while, 51% women had the mercury content below the permissible limit. In the child's urine, 54% infants had their mercury content in urine above the permissible limit [10 μg/L] while 46% infants had content below the permissible limit. The study indicates that 20% of infants had the complete accumulation of mercury in their body which is highly toxic for them. However, the mercury content in the food (wheat) had the contamination with in the permissible limit [100 μg/kg]. There was a significant correlation found between the breastmilk and child's urine and mother's urine. The HQ study also correlates the mercury poisoning effect with 100% of the mother's and 66% of the infants exceeding the limit of non-carcinogenic risk. The Monte Carlo and multivariate study correlates the high health risk in the studied population due to mercury poisoning. The entire study concludes that population inhabitation in the Gangetic plains of Bihar are exposed to mercury poisoning which may be due to geogenic or anthropogenic sources. But, the levels of mercury contamination above the permissible limit could lead to neurogenerative changes in the lactating mothers and their infants. To control the present problem medical intervention is immediately required.

Combined Effect of Gamma Radiation and Heavy Metals on Some Living Organisms

The purpose of this study was to systematise scientific publications on the combined effect of gamma radiation and heavy metals on living organisms. For this purpose, the method of analysis was applied, by means of which scientific papers in PubMed, Google Scholar, and other related databases were analysed for compliance with the inclusion criteria, where the objects of research were toxic effects of radiation and heavy metals on cells and adaptation processes. The results revealed that the study of the problem was carried out on organisms such as microalgae, fungi, weed and agricultural plants, fish, laboratory rats, and human cell cultures. In most studies, an antagonistic effect between low doses of gamma radiation and heavy metal salts was reported, which was manifested by a reduction in the cytotoxicity of isolated exposure to each agent separately. However, there are studies showing additive effects, especially in heavy metals. At the molecular level, heavy metal accumulation in combination with low doses of radiation (typically defined as less than 0.1 Gy or sievert) induces the expression of metallothionein proteins, which can bind free radicals. At the metabolic level, this is manifested by a decrease in lipid peroxidation products, activation of antioxidant enzymes, and a decrease in apoptosis. The study proved both a direct relationship between zinc and cadmium accumulation in cells and inhibition of caspases and an indirect one, by maintaining mitochondrial membrane integrity through metallothionein.

pH-Responsive Alginate/Chitosan Gel Films: An Alternative for Removing Cadmium and Lead from Water

Biosorption, a non-expensive and easy method for removing potentially toxic metal ions from water, has been the subject of extensive research. In this context, this study introduces a novel approach using sodium alginate and chitosan, versatile biopolymers that have shown excellent results as biosorbents. The challenge of maintaining high efficiencies and reuse is addressed by developing alginate/chitosan-based films. These films, prepared using solvent casting and crosslinking methods, form a hydrogel network. The alginate/chitosan-based films, obtained using the eco-friendly polyelectrolyte complex method, were characterized by FTIR, SEM, TGA, and DSC. The study of their swelling pH response, adsorption, and desorption behavior revealed promising results. The adsorption of Pb was significantly enhanced by the presence of both biopolymers (98%) in a shorter time (15 min) at pH = 6.5. The adsorption of both ions followed a pseudo-second-order kinetic and the Langmuir isotherm model. The desorption efficiencies for Cd and Pb were 98.8% and 77.6% after five adsorption/desorption cycles, respectively. In conclusion, the alginate/chitosan-based films present a highly effective and novel approach for removing Cd and Pb from water, with a promising potential for reuse, demonstrating their strong potential in potentially toxic metal removal.

Design, modeling and in silico simulation of bacterial biosensors for detecting heavy metals in irrigation water for precision agriculture

Sensors used in precision agriculture for the detection of heavy metals in irrigation water are generally expensive and sometimes their deployment and maintenance represent a permanent investment to keep them in operation, leaving a lasting polluting footprint in the environment at the end of their lifespan. This represents an area of opportunity to design new biological devices that can replace part, or all of the sensors currently used. In this article, a novel workflow is proposed to fully carry out the complete process of design, modeling, and simulation of reprogrammable microorganisms in silico. As a proof-of-concept, the workflow has been used to design three whole-cell biosensors for the detection of heavy metals in irrigation water, namely arsenic, mercury and lead. These biosensors are in compliance with the concentration limits established by the World Health Organization (WHO). The proposed workflow allows the design of a wide variety of completely in silico biodevices, which aids in solving problems that cannot be easily addressed with classical computing. The workflow is based on two technologies typical of synthetic biology: the design of synthetic genetic circuits, and in silico synthetic engineering, which allows us to address the design of reprogrammable microorganisms using software and hardware to develop theoretical models. These models enable the behavior prediction of complex biological systems. The output of the workflow is then exported in the form of complete genomes in SBOL, GenBank and FASTA formats, enabling their subsequent in vivo implementation in a laboratory. The present proposal enables professionals in the area of computer science to collaborate in biotechnological processes from a theoretical perspective previously or complementary to a design process carried out directly in the laboratory by molecular biologists. Therefore, key results pertaining to this work include the fully in silico workflow that leads to designs that can be tested in the lab in vitro or in vivo, and a proof-of-concept of how the workflow generates synthetic circuits in the form of three whole-cell heavy metal biosensors that were designed, modeled and simulated using the workflow. The simulations carried out show realistic spatial distributions of biosensors reacting to different concentrations (zero, low and threshold level) of heavy metal presence and at different growth phases (stationary and exponential) that are backed up by the whole design and modeling phases of the workflow.

Seasonal variation and human health risk assessment of potentially toxic elements in pharmaceutical effluents around Ilorin metropolis, Nigeria

Potentially toxic elements (PTEs) are widely released into the environment as a result of increased urban and industrial development in recent years. The bulk of PTEs are cancer-causing and harm human health by producing free radicals. As a result, it is crucial to monitor, evaluate, and limit the effects of the elements on human health. In this study, levels of PTEs (As, Cr, Cd, Ni, Co, and Pb) in pharmaceutical effluents discharged along the Asa River around the Ilorin metropolis and their seasonal variations were evaluated. Water samples were collected from eight different locations over a two-season period along the river and analyzed for PTEs using atomic absorption spectrophotometry and an inductively coupled plasma optical emission spectrometer. As, Cd, Pb, Cr, Ni, and Co had mean PTE values in the effluents (both seasons) of 0.0258, 0.0233, 0.00193, 0.0176, and 0.0164 mg/L, respectively, with As and Pb surpassing the WHO standard. Maximum temperature and pH were measured for the physicochemical parameters in the wet season, whereas electrical conductivity and total dissolved solids were seen in the dry season. The average values of the metals in the human risk assessment for carcinogenicity were As > Cd > Pb > Cr > Ni > Co, with As above the recommended threshold in several locations. However, all of the metal hazard indices were < 1, indicating that the waters were suitable for domestic purposes. Nonetheless, the relevant authorities should mandate that pharmaceutical effluents be treated before being released into bodies of water.

Guardians under Siege: Exploring Pollution's Effects on Human Immunity

Chemical pollution poses a significant threat to human health, with detrimental effects on various physiological systems, including the respiratory, cardiovascular, mental, and perinatal domains. While the impact of pollution on these systems has been extensively studied, the intricate relationship between chemical pollution and immunity remains a critical area of investigation. The focus of this study is to elucidate the relationship between chemical pollution and human immunity. To accomplish this task, this study presents a comprehensive review that encompasses in vitro, ex vivo, and in vivo studies, shedding light on the ways in which chemical pollution can modulate human immunity. Our aim is to unveil the complex mechanisms by which environmental contaminants compromise the delicate balance of the body's defense systems going beyond the well-established associations with defense systems and delving into the less-explored link between chemical exposure and various immune disorders, adding urgency to our understanding of the underlying mechanisms and their implications for public health.

Adsorption dynamics of Cd2+(aq) on microwave-synthetized pristine biochar from cocoa pod husk: Green, experimental, and DFT approaches

Biochar obtained via microwave-assisted pyrolysis (MAP) at 720 W and 15 min from cocoa pod husk (CPH) is an efficient adsorbent of Cd2+(aq). Biochar of residual biomass of CPH (BCCPH) possesses favorable physicochemical and morphological properties, featuring a modest surface area yet a suitable porous structure. Adsorption, predominantly governed by physisorption, is influenced by the oxygen-containing active sites (-COOR, -C(R)O, and -CH2OR; R = H, alkyl). CdCO3 formation occurs during adsorption. Experimental data were well-fitted into various kinetic models for a broad understanding of the sorption process. Langmuir model indicates a maximum adsorption capacity of 14.694 mg/g. The thermodynamic study confirms the spontaneous and endothermic sorption. Studies at the molecular level have revealed that the Cd2+ ion tends to bind to surface aromatic carbon atoms. This sustainable approach produces BCCPH via MAP as a solution for waste transformation into water-cleaning materials.

Cadmium-induced Carcinogenesis in Respiratory Organs and the Prostate: Insights from Three Perspectives on Toxicogenomic Approach

Cadmium (Cd) exposure primarily occurs through inhalation, either by smoking or occupational exposure to contaminated air. Upon inhalation, Cd ultimately reaches the prostate through the bloodstream. In this review, we investigate the carcinogenic potential of Cd in both respiratory organs and the prostate. Specifically, this review examines cellular metabolism, comprehensive toxicity, and carcinogenic mechanisms by exploring gene ontology, biological networks, and adverse outcome pathways. In the respiratory organs, Cd induces lung cancer by altering the expression of IL1B and FGF2, causing DNA damage, reducing cell junction integrity, and promoting apoptosis. In the prostate, Cd induces prostate cancer by modifying the expression of EDN1 and HMOX1, leading to abnormal protein activities and maturation, suppressing tumor suppressors, and inducing apoptosis. Collectively, this review provides a comprehensive understanding of the carcinogenic mechanisms of Cd in two different organs by adopting toxicogenomic approaches. These insights can serve as a foundation for further research on cadmium-induced cancer, contributing to the establishment of future cancer prevention strategies.