A miniature dialysis-culture device allows high-density human-induced pluripotent stem cells expansion from growth factor accumulation

Bio-3D printing of scaffold-free ADSC-derived cartilage constructs comparable to natural cartilage in vitro

BACKGROUND

In end-stage osteoarthritis (OA), osteochondral defects reach the subchondral bone and cartilage tissue of sufficient thickness is required to compensate for the defects. Adipose-derived mesenchymal stem/stromal cells (ADSCs), which are abundant in the body, have the potential to differentiate into cartilage and may be a useful cell source for cartilage regeneration. If it is possible to fabricate ADSC-derived cartilage constructs that can cover the damaged area, this could lead to the development of a new regenerative therapy for OA that could replace the currently available treatments. We therefore sought to produce cartilage constructs with suitable thickness and biological properties, similar to native cartilage, using the bio-three-dimensional (3D) printer. We also investigated the culture protocol to ensure that the constructs were fully mature even at the internal site.

METHODS

ADSCs were isolated from three rats and expanded to create cartilage spheroids. The spheroids were arranged into patches using a Kenzan bio-3D printer to create scaffold-free, cell-only cartilage constructs. Basic fibroblast growth factor (bFGF) was added during expansion culture and varying concentrations of bone morphogenetic protein2 (BMP2) were supplemented during chondrogenic differentiation. The levels of glycosaminoglycans (GAG) in the spheroids and constructs were measured. The histology of the spheroids and constructs and the compressive strength of the constructs were evaluated.

RESULTS

The amount of GAG in the cartilage spheroids was higher in the bFGF and high-BMP2 concentration groups than in the non-supplemented and low-BMP2 concentration groups. Chondrocytes were abundant in the spheroids and constructs, and the extracellular matrix was homogeneously positive for safranin O staining and type II collagen immunostaining. The strength of cartilage constructs was consistent with that of the native cartilage (compressive strength 4.2 ± 1.5 MPa, n = 12).

CONCLUSION

By optimizing the cell culture conditions, inducing chondrogenic differentiation, and bio-3D printing, we successfully fabricated fully mature cartilage constructs with mechanical and histological properties similar to those of articular cartilage.

Advancements in Microphysiological systems: Exploring organoids and organ-on-a-chip technologies in drug development -focus on pharmacokinetics related organs

This study explored the evolving landscape of Microphysiological Systems (MPS), with a focus on organoids and organ-on-a-chip (OoC) technologies, which are promising alternatives to animal testing in drug discovery. MPS technology offers in vitro models with high physiological relevance, simulating organ function for pharmacokinetic studies. Organoids composed of 3D cell aggregates and OoCs mimicking in vivo environments based on microfluidic platforms represent the forefront of MPS. This paper provides a comprehensive overview of their application in studying the gut, liver, and kidney and their challenges in becoming reliable alternatives to in vivo models. Although MPS technology is not yet fully comparable to in vivo systems, its continued development, aided by in silico, automation, and AI approaches, is anticipated to bring about further advancements. Collaboration across multiple disciplines and ongoing regulatory discussions will be crucial in driving MPS toward practical and ethical applications in biomedical research and drug development.

Application of bacterial-derived long cellulose nanofiber to suspension culture of mammalian cells as a shear protectant

Nanofibrillated bacterial cellulose (NFBC) is a bio-compatible long-fiber nanocellulose produced by cellulose-synthesizing bacteria. It forms an entangled network structure in the suspension state, thereby imparting greater viscosity than conventional media additives. In this study, we examined its application as a shear protectant in the suspension culture of mammalian cells to mitigate hydrodynamic stress imposed on the cells. The media supplemented with hydroxypropyl cellulose-adsorbed NFBC (HP-NFBC) exhibited an increase in shear viscosity according to rheometric analysis, similar to FP003, a commercially available medium additive. Suspension culture of Chinese hamster ovary cells in HP-NFBC-containing media under a high stirring rate (120 rpm) demonstrated higher cell growth and lower cell death compared to those in the medium without additives and in FP003. A 0.10 (w/v)% concentration of HP-NFBC showed the highest viable cell number among the tested concentrations. Computational fluid dynamics simulation revealed a decrease in shear rate and flow velocity within the spinner flask owing to the addition of HP-NFBC or FP003. It is suggested that the decline of these parameters in high-viscosity media suppresses the hydrodynamic stress on cells. This study highlights the potential of HP-NFBC as a shear protectant in mammalian cell suspension culture.

Atelocollagen supports three-dimensional culture of human induced pluripotent stem cells

As autologous induced pluripotent stem cell (iPSC) therapy requires a custom-made small-lot cell production line, and the cell production method differs significantly from the existing processes for producing allogeneic iPSC stocks for clinical use. Specifically, mass culture to produce stock is no longer necessary; instead, a series of operations from iPSC production to induction of differentiation of therapeutic cells must be performed continuously. A three-dimensional (3D) culture method using small, closed-cell manufacturing devices is suitable for autologous iPSC therapy. The use of such devices avoids the need to handle many patient-derived specimens in a single clean room; handling of cell cultures in an open system in a cell processing facility increases the risk of infection. In this study, atelocollagen beads were evaluated as a 3D biomaterial to assist 3D culture in the establishment, expansion culture, and induction of differentiation of iPSCs. It was found that iPSCs can be handled in a closed-cell device with the same ease as use of a two-dimensional (2D) culture when laminin-511 is added to the medium. In conclusion, atelocollagen beads enable 3D culture of iPSCs, and the quality of the obtained cells is at the same level as those derived from 2D culture.

Dialysis rolled scaffold bioreactor allows extended production of monoclonal antibody with reduced media use

Rapidly expanding biopharmaceutical market demands more cost-effective platforms to produce protein therapeutics. To this end, novel approaches, such as perfusion culture or concentrated fed-batch, have been explored for higher yields and lower manufacturing costs. Although these new approaches produced promising results, but their wide-spread use in the industry is still limited. In this study, a dialysis rolled scaffold bioreactor was presented for long-term production of monoclonal antibodies with reduced media consumption. Media dialysis can selectively remove cellular bio-wastes without losing cells or produced recombinant proteins. The dialysis process was streamlined to significantly improve its efficiency. Then, extended culture of recombinant CHO cells for 41 days was successfully demonstrated with consistent production rate and minimal media consumption. The unique configuration of the developed bioreactor allows efficient dialysis for media management, as well as rapid media exchange to harvest produced recombinant proteins before they degrade. Taken together, it was envisioned that the developed bioreactor will enable cost-effective and long-term large-scale culture of various cells for biopharmaceutical production.

Systematic optimization of culture media for maintenance of human induced pluripotent stem cells using the response surface methodology

The application of human induced pluripotent stem cells (hiPSCs) provides tremendous opportunities in cell therapy. However, culturing these cells faces many practical challenges, including costs associated with cell culture media and the optimization of cell culture conditions. Providing an optimized culture platform for hiPSCs to maintain pluripotency and self-renewal and generate cost-effective and robust therapeutics is an immediate requirement. This study used the design of experiments and the response surface methodology, a powerful statistical tool, to generate empirical models for predicting the optimal culture conditions of the hiPSCs. Pluripotency and cell proliferation were applied as read-outs to determine the optimal concentration of basic fibroblast growth factor (bFGF) and cell density. One model was defined to predict pluripotency and cell proliferation in terms of the predictor variables of the bFGF concentration and cell seeding density. Predicted culture conditions to maximize maintaining cell pluripotency were successfully validated. The present study's findings provide a novel approach that can potentially allow controllable hiPSC culture routine in translational research.

Fabrication Method for Shape-Controlled 3D Tissue Using High-Porosity Porous Structure

Shape-controlled 3D tissues resemble natural living tissues in human and animal bodies and are essential materials for developing and improving technologies in regenerative medicine, drug discovery, and biological robotics. In previous studies, shape-controlled 3D tissues were fabricated using scaffold structures or 3D bioprinting techniques. However, controlling the shape of 3D tissues without leaving non-natural materials inside the 3D tissue and efficiently fabricating them remains challenging. In this paper, we propose a novel method for fabricating shape-controlled 3D tissues free of non-natural materials using a flexible high-porosity porous structure (HPPS). The HPPS consisted of a micromesh with pore sizes of 14.87 ± 1.83 μm, lattice widths of 2.24 ± 0.10 μm, thicknesses of 9.96 ± 0.92 μm, porosity of 69.06 ± 3.30%, and an I-shaped microchamber of depth 555.26 ± 11.17 μm. U-87 human glioma cells were cultured in an I-shaped HPPS microchamber for 48 h. After cultivation, the 3D tissue was released within a few seconds while maintaining its I-shape. Specific chemicals, such as proteolytic enzymes, were not used. Moreover, the viability of the released cells composed of shape-controlled 3D tissues free of non-natural materials was above 90%. Therefore, the proposed fabrication method is recommended for shape-controlled 3D tissues free of non-natural materials without applying significant stresses to the cells.

Growth prolongation of human induced pluripotent stem cell aggregate in three-dimensional suspension culture system by addition of botulinum hemagglutinin

Human induced pluripotent stem cells (hiPSCs) can be used in regenerative therapy as an irresistible cell source, and so the development of scalable production of hiPSCs for three-dimensional (3D) suspension culture is required. In this study, we established a simple culture strategy for improving hiPSC aggregate growth using botulinum hemagglutinin (HA), which disrupts cell-cell adhesion mediated by E-cadherin. When HA was added to the suspension culture of hiPSC aggregates, E-cadherin-mediated cell-cell adhesion was temporarily disrupted within 24 h, but then recovered. Phosphorylated myosin light chain, a contractile force marker, was also recovered at the periphery of hiPSC aggregates. The cell aggregates were suppressed the formation of collagen type I shell-like structures at the periphery by HA and collagen type I was homogenously distributed within the cell aggregates. In addition, these cell aggregates retained the proliferation marker Ki-67 throughout the cell aggregates. The apparent specific growth rate with HA addition was maintained continuously throughout the culture, and the final cell density was 1.7-fold higher than that in the control culture. These cells retained high expression levels of pluripotency markers. These observations indicated that relaxation of cell-cell adhesions by HA addition induced rearrangement of the mechanical tensions generated by actomyosin in hiPSC aggregates and suppression of collagen type I shell-like structure formation. These results suggest that this simple and readily culture strategy is a potentially useful tool for improving the scalable production of hiPSCs for 3D suspension cultures.

Reversible suspension culture of human vascular smooth muscle cells using the functional biopolymer FP003

Human vascular smooth muscle cells (SMCs) are adherent cells, and they cannot survive without scaffolds in suspension culture. Here, we aimed to establish a suspension culture of SMCs using the functional biopolymer FP003 and to investigate the proliferation status of the cells. When SMCs were suspension cultured with FP003, their proliferation was inhibited with a viability of 75% until day 15. When SMCs were re-plated on plastic plates after suspension culture with FP003 for 48 h, the SMCs proliferated as in a normal plate culture. The SMCs cultured in suspension with FP003 showed a relatively low phosphorylation of retinoblastoma protein, low expression of cyclin D1, high proportion of G0/G1 phase cells, low proportion of S phase cells, and no obvious signs of apoptosis, indicating that this culture system inhibited progression from the G1 to S phase. This growth arrest was a reversible property that showed no significant changes in the expressions of the marker proteins α-smooth muscle actin and smooth muscle myosin heavy chain. These results suggest that human SMCs can be stably cultured in suspension with FP003 without losing their characteristics when they are cultured on plastic plates again.

Dialysis based-culture medium conditioning improved the generation of human induced pluripotent stem cell derived-liver organoid in a high cell density

Human pluripotent stem cell-derived liver organoids (HLOs) have recently become a promising alternative for liver regenerative therapy. To realize this application, a large amount of human-induced pluripotent stem cells (hiPSCs) derived-liver cells are required for partial liver replacement during transplantation. This method requires stepwise induction using costly growth factors to direct the hiPSCs into the hepatic lineage. Therefore, we developed a simple dialysis-based medium conditioning that fully utilized growth factors accumulation to improve hepatic differentiation of hiPSCs at a high cell density. The results demonstrated that the dialysis culture system could accumulate the four essential growth factors required in each differentiation stage: activin A, bone morphogenetic protein 4 (BMP4), hepatocyte growth factor (HGF), and oncostatin M (OSM). As a result, this low lactate culture environment allowed high-density bipotential hepatic differentiation of up to 4.5 × 10⁷ cells/mL of human liver organoids (HLOs), consisting of hiPSC derived-hepatocyte like cells (HLCs) and cholangiocyte like-cells (CLCs). The differentiated HLOs presented a better or comparable hepatic marker and hepatobiliary physiology to the one that differentiated in suspension culture with routine daily medium replacement at a lower cell density. This simple miniaturized dialysis culture system demonstrated the feasibility of cost-effective high-density hepatic differentiation with minimum growth factor usage.