The open gate structure of the membrane-embedded KcsA potassium channel viewed from the cytoplasmic side

Cardiolipin binding enhances KcsA channel gating via both its specific and dianion-monoanion interchangeable sites

KcsA is a potassium channel with a plethora of structural and functional information, but its activity in the KcsA-producing actinomycete membranes remains elusive. To determine lipid species involved in channel-modulation, a surface plasmon resonance (SPR)-based methodology, characterized by immobilization of membrane proteins under a membrane environment, was applied. Dianionic cardiolipin (CL) showed extremely higher affinity for KcsA than monoanionic lipids. The SPR experiments further demonstrated that CL bound not only to the N-terminal M0 helix, a lipid-sensor domain, but to the M0 helix-deleted mutant. In contrast, monoanionic lipids interacted primarily with the M0 helix. This indicates the presence of an alternative CL-binding site, plausibly in the transmembrane domain. Single-channel recordings demonstrated that CL enhanced channel opening in an M0-independent manner. Taken together, the action of monoanionic lipids is exclusively mediated by the M0 helix, while CL binds both the M0 helix and its specific site, further enhancing the channel activity.

Computation of topographic and three-dimensional atomic force microscopy images of biopolymers by calculating forces

Atomic force microscopy (AFM) is widely utilized to visualize the molecular motions of biomolecules. Comparison of experimentally measured AFM images with simulated AFM images based on known structures of biomolecules is often necessary to elucidate what is actually resolved in the images. Experimental AFM images are generated by force measurements; however, conventional AFM simulation has been based on geometrical considerations rather than calculating forces using molecular dynamics simulations due to limited computation time. This letter summarizes recently developed methods to simulate topographic and three-dimensional AFM (3D-AFM) images of biopolymers such as chromosomes and cytoskeleton fibers. Scanning such biomolecules in AFM measurements usually results in nonequilibrium-type work being performed. As such, the Jarzynski equality was employed to relate the nonequilibrium work to the free energy profiles, and the forces were calculated by differentiating the free energy profiles. The biomolecules and probes were approximated using a supra-coarse-grained model, allowing the simulation of force-distance curves in feasible time. It was found that there is an optimum scanning velocity and that some of polymer structures are resolved in the simulated 3D-AFM images. The theoretical background adopted to rationalize the use of small probe radius in the conventional AFM simulation of biomolecules is clarified.

The Optimized Conformation Dynamics of the KcsA Filter as a Probe for Lateral Membrane Effects: A First Principle Based Femto-Sec Resolution MD Study

We provide a high resolution, all-atom, femto-second molecular dynamics (MD) simulation of the passage of K⁺ ions and H₂O molecules through the selectivity filter of the KcsA potassium ion channel, based on first principle physical methods. Our results show that a change in the length of the selectivity filter of as little as 3%, regardless of whether the filter is made longer or shorter, will reduce the K⁺ ion current by around 50%. In addition, further squeezing or stretching by about 9% can effectively stop the current. Our results demonstrate optimized conformational dynamics that associate an increased mobility of parts in the filter linings with a standard configuration, leading to maximized conduction rates that are highly sensitive to geometrical distortions. We discuss this latter aspect in relation to lateral membrane effects on the filter region of ion channels and the 'force from lipids' hypothesis.

Mechanisms underlying drug-mediated regulation of membrane protein function

The hydrophobic coupling between membrane proteins and their host lipid bilayer provides a mechanism by which bilayer-modifying drugs may alter protein function. Drug regulation of membrane protein function thus may be mediated by both direct interactions with the protein and drug-induced alterations of bilayer properties, in which the latter will alter the energetics of protein conformational changes. To tease apart these mechanisms, we examine how the prototypical, proton-gated bacterial potassium channel KcsA is regulated by bilayer-modifying drugs using a fluorescence-based approach to quantify changes in both KcsA function and lipid bilayer properties (using gramicidin channels as probes). All tested drugs inhibited KcsA activity, and the changes in the different gating steps varied with bilayer thickness, suggesting a coupling to the bilayer. Examining the correlations between changes in KcsA gating steps and bilayer properties reveals that drug-induced regulation of membrane protein function indeed involves bilayer-mediated mechanisms. Both direct, either specific or nonspecific, binding and bilayer-mediated mechanisms therefore are likely to be important whenever there is overlap between the concentration ranges at which a drug alters membrane protein function and bilayer properties. Because changes in bilayer properties will impact many diverse membrane proteins, they may cause indiscriminate changes in protein function.

Conductance selectivity of Na+ across the K+ channel via Na+ trapped in a tortuous trajectory

Ion selectivity of the potassium channel is crucial for regulating electrical activity in living cells; however, the mechanism underlying the potassium channel selectivity that favors large K⁺ over small Na⁺ remains unclear. Generally, Na⁺ is not completely excluded from permeation through potassium channels. Herein, the distinct nature of Na⁺ conduction through the prototypical KcsA potassium channel was examined. Single-channel current recordings revealed that, at a high Na⁺ concentration (200 mM), the channel was blocked by Na⁺, and this blocking was relieved at high membrane potentials, suggesting the passage of Na⁺ across the channel. At a 2,000 mM Na⁺ concentration, single-channel Na⁺ conductance was measured as one-eightieth of the K⁺ conductance, indicating that the selectivity filter allows substantial conduit of Na⁺ Molecular dynamics simulations revealed unprecedented atomic trajectories of Na⁺ permeation. In the selectivity filter having a series of carbonyl oxygen rings, a smaller Na⁺ was distributed off-center in eight carbonyl oxygen-coordinated sites as well as on-center in four carbonyl oxygen-coordinated sites. This amphipathic nature of Na⁺ coordination yielded a continuous but tortuous path along the filter. Trapping of Na⁺ in many deep free energy wells in the filter caused slow elution. Conversely, K⁺ is conducted via a straight path, and as the number of occupied K⁺ ions increased to three, the concerted conduction was accelerated dramatically, generating the conductance selectivity ratio of up to 80. The selectivity filter allows accommodation of different ion species, but the ion coordination and interactions between ions render contrast conduction rates, constituting the potassium channel conductance selectivity.

Dual-Site Binding of Quaternary Ammonium Ions as Internal K+-Ion Channel Blockers: Nonclassical (C-H···O) H Bonding vs Dispersive (C-H···H-C) Interaction

A molecular-level study of the influence of the alkyl chain length of quaternary ammonium ions (QAs) on the blocking action and the mode of binding with the bacterial KcsA K⁺-ion channel is carried out by molecular dynamics (MD) simulations as well as quantum mechanics/molecular mechanics (QM/MM) methods. The present work unveils distinct modes of binding for different QAs, due to differences in size and hydrophobicity. The QAs bind near the channel gate as well as at the central cavity, leading to a possible dual-site blocking action. Small-sized tetraethylammonium (TEA) and tetrabutylammonium (TBA) ions enter inside the channel cavity in the open state of KcsA but bind strongly in the closed state. TEA binds to the polar hydroxyl group of threonine residues situated at the channel gate via nonclassical H-bonding interaction (C-H···O), while TBA binds to a second binding site, the central cavity, with hydrophobic benzyl and sec-butyl side chains of phenylalanine and isoleucine residues via alkyl-π and hydrophobic interactions (C-H···H-C). On the contrary, large tetrahexylammonium (THA) and tetraoctylammonium (TOA) ions bind the hydrophobic side-chain methyl and isopropyl of alanine and valine at the channel gate both in the open and closed states, thereby restricting the free movement of large QAs toward the center of the cavity. However, the binding to the hydrophobic benzyl and sec-butyl side chains of phenylalanine and isoleucine residues in the closed state is thermodynamically preferable. Also, the binding energy is found to increase with an increase in the alkyl chain length from ethyl (-16.4 kcal/mol) to octyl (-65.5 kcal/mol), due to an almost linear increase in dispersive interaction.

Queueing arrival and release mechanism for K+ permeation through a potassium channel

The mechanism underlying ion permeation through potassium channels still remains controversial. K+ ions permeate across a narrow selectivity filter (SF) in a single file. Conventional scenarios assume that K+ ions are tightly bound in the SF, and, thus, they are displaced from their energy well by ion-ion repulsion with an incoming ion. This tight coupling between entering and exiting ions has been called the "knock-on" mechanism. However, this paradigm is contradicted by experimental data measuring the water-ion flux coupling ratio, demonstrating fewer ion occupancies. Here, the results of molecular dynamics simulations of permeation through the KcsA potassium channel revealed an alternative mechanism. In the aligned ions in the SF (an ion queue), the outermost K+ was readily and spontaneously released toward the extracellular space, and the affinity of the relevant ion was ~ 50 mM. Based on this low-affinity regime, a simple queueing mechanism described by loose coupling of entering and exiting ions is proposed.

Constitutive boost of a K+ channel via inherent bilayer tension and a unique tension-dependent modality

Molecular mechanisms underlying channel-membrane interplay have been extensively studied. Cholesterol, as a major component of the cell membrane, participates either in specific binding to channels or via modification of membrane physical features. Here, we examined the action of various sterols (cholesterol, epicholesterol, etc.) on a prototypical potassium channel (KcsA). Single-channel current recordings of the KcsA channel were performed in a water-in-oil droplet bilayer (contact bubble bilayer) with a mixed phospholipid composition (azolectin). Upon membrane perfusion of sterols, the activated gate at acidic pH closed immediately, irrespective of the sterol species. During perfusion, we found that the contacting bubbles changed their shapes, indicating alterations in membrane physical features. Absolute bilayer tension was measured according to the principle of surface chemistry, and inherent bilayer tension was ∼5 mN/m. All tested sterols decreased the tension, and the nonspecific sterol action to the channel was likely mediated by the bilayer tension. Purely mechanical manipulation that reduced bilayer tension also closed the gate, whereas the resting channel at neutral pH never activated upon increased tension. Thus, rather than conventional stretch activation, the channel, once ready to activate by acidic pH, changes the open probability through the action of bilayer tension. This constitutes a channel regulating modality by two successive stimuli. In the contact bubble bilayer, inherent bilayer tension was high, and the channel remained boosted. In the cell membrane, resting tension is low, and it is anticipated that the ready-to-activate channel remains closed until bilayer tension reaches a few millinewton/meter during physiological and pathological cellular activities.

Lipid bilayer-atomic force microscopy combined platform records simultaneous electrical and topological changes of the TRP channel polycystin-2 (TRPP2)

Ion channels are transmembrane proteins that mediate ion transport across biological membranes. Ion channel function is traditionally characterized by electrical parameters acquired with techniques such as patch-clamping and reconstitution in lipid bilayer membranes (BLM) that provide relevant information such as ionic conductance, selectivity, and gating properties. High resolution structural information of ion channels however, requires independent technologies, of which atomic force microscopy (AFM) is the only one that provides topological features of single functional channel proteins in their native environments. To date practically no data exist on direct correlations between electrical features and topological parameters from functional single channel complexes. Here, we report the design and construction of a BLM reconstitution microchamber that supports the simultaneous recording of electrical currents and AFM imaging from single channel complexes. As proof-of-principle, we tested the technique on polycystin-2 (PC2, TRPP2), a TRP channel family member from which we had previously elucidated its tetrameric topology by AFM imaging, and single channel currents by the BLM technique. The experimental setup provided direct structural-functional correlates from PC2 single channel complexes that disclosed novel topological changes between the closed and open sub-conductance states of the functional channel, namely, an inverse correlation between conductance and height of the channel. Unexpectedly, we also disclosed intrinsic PC2 mechanosensitivity in response to external forces. The platform provides a suitable means of accessing topological information to correlate with ion channel electrical parameters essential to understand the physiology of these transmembrane proteins.

Concurrent In Vitro Synthesis and Functional Detection of Nascent Activity of the KcsA Channel under a Membrane Potential

Processes involved in the functional formation of prokaryotic membrane proteins have remained elusive. Here, we developed a new in vitro membrane protein expression system to detect nascent activities of the KcsA potassium channel in lipid bilayers under an applied membrane potential. The channel was synthesized using a reconstituted Escherichia coli-based in vitro transcription/translation system (IVTT) in a water-in-oil droplet lined by a membrane. The synthesized channels spontaneously incorporated into the membrane even without the translocon machinery (unassisted pathway) and formed functional channels with the correct orientation. The single-channel current of the first appearing nascent channel was captured, followed by the subsequent appearance of multiple channels. Notably, the first appearance time shortened substantially as the membrane potential was hyperpolarized. Under a steadily applied membrane potential, this system serves as a production line of membrane proteins via the unassisted pathway, mimicking the bacterial synthetic membrane.

Coupling neutron reflectivity with cell-free protein synthesis to probe membrane protein structure in supported bilayers

The structure of the p7 viroporin, an oligomeric membrane protein ion channel involved in the assembly and release of the hepatitis C virus, was determined from proteins expressed and inserted directly into supported model lipid membranes using cell-free protein expression. Cell-free protein expression allowed (i ) high protein concentration in the membrane, (ii ) control of the protein's isotopic constitution, and (iii ) control over the lipid environment available to the protein. Here, we used cell-free protein synthesis to directly incorporate the hepatitis C virus (HCV) p7 protein into supported lipid bilayers formed from physiologically relevant lipids (POPC or asolectin) for both direct structural measurements using neutron reflectivity (NR) and conductance measurements using electrical impedance spectroscopy (EIS). We report that HCV p7 from genotype 1a strain H77 adopts a conical shape within lipid bilayers and forms a viroporin upon oligomerization, confirmed by EIS conductance measurements. This combination of techniques represents a novel approach to the study of membrane proteins and, through the use of selective deuteration of particular amino acids to enhance neutron scattering contrast, has the promise to become a powerful tool for characterizing the protein conformation in physiologically relevant environments and for the development of biosensor applications.

Oriented Reconstitution of the Full-Length KcsA Potassium Channel in a Lipid Bilayer for AFM Imaging

Here, we have developed a method of oriented reconstitution of the KcsA potassium channel amenable to high-resolution AFM imaging. The solubilized full-length KcsA channels with histidine-tagged (His-tag) C-terminal ends were attached to a Ni²⁺-coated mica surface, and then detergent-destabilized liposomes were added to fill the interchannel space. AFM revealed that the membrane-embedded KcsA channels were oriented with their extracellular faces upward, seen as a tetrameric square shape. This orientation was corroborated by the visible binding of a peptide scorpion toxin, agitoxin-2. To observe the cytoplasmic side of the channel, a His-tag was inserted into the extracellular loop, and the oppositely oriented channels provided wholly different images. In either orientation, the channels were individually dispersed at acidic pH, whereas they were self-assembled at neutral pH, indicating that the oriented channels are allowed to diffuse in the membrane. This method is readily applicable to membrane proteins in general for AFM imaging.

The structure and function of cell membranes examined by atomic force microscopy and single-molecule force spectroscopy

The cell membrane is one of the most complicated biological complexes, and long-term fierce debates regarding the cell membrane persist because of technical hurdles. With the rapid development of nanotechnology and single-molecule techniques, our understanding of cell membranes has substantially increased. Atomic force microscopy (AFM) has provided several unprecedented advances (e.g., high resolution, three-dimensional and in situ measurements) in the study of cell membranes and has been used to systematically dissect the membrane structure in situ from both sides of membranes; as a result, novel models of cell membranes have recently been proposed. This review summarizes the new progress regarding membrane structure using in situ AFM and single-molecule force spectroscopy (SMFS), which may shed light on the study of the structure and functions of cell membranes.

Liposome chaperon in cell-free membrane protein synthesis: one-step preparation of KcsA-integrated liposomes and electrophysiological analysis by the planar bilayer method

Chaperoning functions of liposomes were investigated using cell-free membrane protein synthesis.

Channel function reconstitution and re-animation: a single-channel strategy in the postcrystal age

The most essential properties of ion channels for their physiologically relevant functions are ion-selective permeation and gating. Among the channel species, the potassium channel is primordial and the most ubiquitous in the biological world, and knowledge of this channel underlies the understanding of features of other ion channels. The strategy applied to studying channels changed dramatically after the crystal structure of the potassium channel was resolved. Given the abundant structural information available, we exploited the bacterial KcsA potassium channel as a simple model channel. In the postcrystal age, there are two effective frameworks with which to decipher the functional codes present in the channel structure, namely reconstitution and re-animation. Complex channel proteins are decomposed into essential functional components, and well-examined parts are rebuilt for integrating channel function in the membrane (reconstitution). Permeation and gating are dynamic operations, and one imagines the active channel by breathing life into the 'frozen' crystal (re-animation). Capturing the motion of channels at the single-molecule level is necessary to characterize the behaviour of functioning channels. Advanced techniques, including diffracted X-ray tracking, lipid bilayer methods and high-speed atomic force microscopy, have been used. Here, I present dynamic pictures of the KcsA potassium channel from the submolecular conformational changes to the supramolecular collective behaviour of channels in the membrane. These results form an integrated picture of the active channel and offer insights into the processes underlying the physiological function of the channel in the cell membrane.

pH-dependent promotion of phospholipid flip-flop by the KcsA potassium channel

KcsA is a pH-dependent potassium channel that is activated at acidic pH. The channel undergoes global conformational changes upon activation. We hypothesized that the open-close conformational changes of the transmem brane region could promote the flip-flop of phosphoiipids. Based on this hypothesis, we measured the flip-flop ofNBD-labeled phospholipids in KcsA-incorporated proteoliposomes. Both flip and flop rates of ~NBD-PC were significantly enhanced in the presence of KcsA and were several times higher at pH 4.0 than at pH 7.4, suggesting that KcsA promotes the phospholipid flip in a conformation-dependent manner. Phospholipids were nonselectively flipped with respect to the glycerophospholipid structure. In the active state of KcsA channel,tetrabutylammonium locks the channel in the open conformation at acidic pH; however, it did not alter the fliprate of CGNBD-PC. Thus, the open-close transition of the transmembrane region did not affect the flip-flop of phospholipids. In addition, the KcsA mutant that lacked anN-terminal amphipathic helix (MO-helix) was found to show reduced ability to fl ip C6NBD-phospholipids at acidic pH. The closed conformation is stabilized in the absence of MO-heli x, and thus the attenuated flip could be explained by the reduced prevalence of the open conformation.These results suggest that the open conformation of KcsA can disturb the bilayer integrity and facilitate the flip-flop of phospholipids.

Surface-enhanced IR absorption spectroscopy of the KcsA potassium channel upon application of an electric field

Surface-enhanced IR absorption spectroscopy coupled with an electrochemical system enables the potassium-induced specific structural change of the potassium channel.

Regulation of ion channel function by the host lipid bilayer examined by a stopped-flow spectrofluorometric assay

To examine the function of ligand-gated ion channels in a defined membrane environment, we developed a robust sequential-mixing fluorescence-based stopped-flow assay. Channel activity is determined using a channel-permeable quencher (e.g., thallium, Tl(+)) of a water-soluble fluorophore (8-aminonaphthalene-1,3,6-trisulfonic acid) encapsulated in large unilamellar vesicles in which the channel of interest has been reconstituted, which allows for rapid solution changes. To validate the method, we explored the activation of wild-type KcsA channel, as well as it's noninactivating (E71A) KcsA mutant, by extravesicular protons (H(+)). For both channel types, the day-to-day variability in the reconstitution yield (as judged from the time course of fluorescence quenching) is <10%. The activation curve for E71A KcsA is similar to that obtained previously using single-channel electrophysiology, and the activation curves for wild-type and E71A KcsA are indistinguishable, indicating that channel activation and inactivation are separate processes. We then investigated the regulation of KcsA activation by changes in lipid bilayer composition. Increasing the acyl chain length (from C18:1 to C22:1 in diacylphosphatidylcholine), but not the mole fraction of POPG (>0.25) in the bilayer-forming phospholipid mixture, alters KcsA H(+) gating. The bilayer-thickness-dependent shift in the activation curve is suggestive of a decrease in an apparent H(+) affinity and cooperativity. The control over bilayer environment and time resolution makes this method a powerful assay for exploring ligand activation and inactivation of ion channels, and how channel gating varies with changes in the channels' lipid bilayer environment or other regulatory processes.

Atomic force microscopy of asymmetric membranes from turtle erythrocytes

The cell membrane provides critical cellular functions that rely on its elaborate structure and organization. The structure of turtle membranes is an important part of an ongoing study of erythrocyte membranes. Using a combination of atomic force microscopy and single-molecule force spectroscopy, we characterized the turtle erythrocyte membrane structure with molecular resolution in a quasi-native state. High-resolution images both leaflets of turtle erythrocyte membranes revealed a smooth outer membrane leaflet and a protein covered inner membrane leaflet. This asymmetry was verified by single-molecule force spectroscopy, which detects numerous exposed amino groups of membrane proteins in the inner membrane leaflet but much fewer in the outer leaflet. The asymmetric membrane structure of turtle erythrocytes is consistent with the semi-mosaic model of human, chicken and fish erythrocyte membrane structure, making the semi-mosaic model more widely applicable. From the perspective of biological evolution, this result may support the universality of the semi-mosaic model.

Gating-Associated Clustering-Dispersion Dynamics of the KcsA Potassium Channel in a Lipid Membrane

The KcsA potassium channel is a prototypical channel of bacterial origin, and the mechanism underlying the pH-dependent gating has been studied extensively. With the high-resolution atomic force microscopy (AFM), we have resolved functional open and closed gates of the KcsA channel under the membrane-embedded condition. Here we surprisingly found that the pH-dependent gating of the KcsA channels was associated with clustering-dispersion dynamics. At neutral pH, the resting, closed channels were coalesced, forming nanoclusters. At acidic pH, the open-gated channels were dispersed as singly isolated channels. Time-lapse AFM revealed reversible clustering-dispersion transitions upon pH changes. At acidic equilibrium, a small fraction of the channels was nanoclustered, in which the gate was apparently closed. Thus, it is suggested that opening of the gate and the dispersion are tightly linked. The interplay between the intramolecular conformational change and the supramolecular clustering-dispersion dynamics provides insights into understanding of unprecedented functional cooperativity of channels.

Quantitative imaging of the electrostatic field and potential generated by a transmembrane protein pore at subnanometer resolution

Elucidating the mechanisms by which proteins translocate small molecules and ions through transmembrane pores and channels is of great interest in biology, medicine, and nanotechnology. However, the characterization of pore forming proteins in their native state lacks suitable methods that are capable of high-resolution imaging (~1 nm) while simultaneously mapping physical and chemical properties. Here we report how force-distance (FD) curve-based atomic force microscopy (AFM) imaging can be applied to image the native pore forming outer membrane protein F (OmpF) at subnanometer resolution and to quantify the electrostatic field and potential generated by the transmembrane pore. We further observe the electrostatic field and potential of the OmpF pore switching "on" and "off" in dependence of the electrolyte concentration. Because electrostatic field and potential select for charged molecules and ions and guide them to the transmembrane pore the insights are of fundamental importance to understand the pore function. These experimental results establish FD-based AFM as a unique tool to image biological systems to subnanometer resolution and to quantify their electrostatic properties.