Spectrally-selective all-inorganic scattering luminophores for solar energy-harvesting clear glass windows

Improving power conversion efficiency in luminescent solar concentrators using nanoparticle fluorescence and scattering

Large-size luminescent solar concentrators (LSCs), which act as a complement to silicon-based photovoltaic (Si-PV) systems, still suffer from low power conversion efficiency (PCE). How to improve the performance of LSCs, especially large ones, is currently a hot research topic. Traditional LSCs have only a single transmission mode of fluorescence from the luminescent materials to the Si-PV, but here we introduce a new idea to improve the absorption of Si-PV by employing dual transmission modes of both fluorescence and scattering light. To prepare LSCs with dual mode transmission, Si-PV systems are coupled around the edges of a light-harvesting slice, which is prepared by ultraviolet light-induced polymerization of methyl methacrylate (MMA) solution containing both luminescent CsPbBr₃ and TiO₂ nanocrystals (NCs). When the sun light or incident light is coupled into the light-harvesting slice, CsPbBr₃ NCs can convert the incident light into fluorescence, and then partly transmit to Si-PV at the edges, where the light is finally converted into electrical energy. Besides the traditional fluorescence transmission mode, the addition of TiO₂ brings another transmission mode, namely the scattering of incident light to Si-PV, leading to an increase in PCE. In comparison to that of pure CsPbBr₃-based LSCs without the addition of TiO₂ (0.97%), the PCE of TiO₂-doped LSCs with a large size of 20 cm × 20 cm is improved to 1.82%. The maximal PCE appears for LSCs with a size of 5 cm × 5 cm, reaching 2.62%. The reported method of dual transmission modes is a new alternative way to improve the performance of LSC devices, which does not need to change the optical properties of luminescent materials. Moreover, the production process is simple, low-cost and suitable for preparing large area LSCs, further promoting the application of LSCs.

Dual Thermal-/Electrical-Responsive Luminescent ‘Smart’ Window

As buildings are a large energy user, it is important to not only reduce their consumption, but also have them generate their own electricity. Here, we describe a smart window that could reduce electricity consumption, normally used for air conditioning and lighting, by absorbing excess solar radiation with dichroic fluorescent dye molecules aligned in a switchable liquid crystal host and guiding the re-emitted light energy to the edges of the device, where it can be used to generate electricity via attached photovoltaic cells. The liquid crystals are responsive both to temperature changes and applied electrical fields. At higher temperatures, transmission decreases due to increased disorder in the liquid crystals, while the application of an electrical field increases transmission by effectively realigning the dyes for minimal absorption. Using alternative configurations, a window with a transparent rest state was also produced, in which transmission can be decreased by applying an electrical field; the thermal response remains identical.

Initial Field Testing Results from Building-Integrated Solar Energy Harvesting Windows Installation in Perth, Australia

We report on the field testing datasets and performance evaluation results obtained from a commercial property-based visually-clear solar window installation site in Perth-Australia. This installation was fitted into a refurbished shopping center entrance porch and showcases the potential of glass curtain wall-based solar energy harvesting in built environments. In particular, we focus on photovoltaic (PV) performance characteristics such as the electric power output, specific yield, day-to-day consistency of peak output power, and the amounts of energy generated and stored daily. The dependencies of the generated electric power and stored energy on multiple environmental and geometric parameters are also studied. An overview of the current and future application potential of high-transparency, visually-clear solar window-based curtain wall installations suitable for practical building integration is provided.

Recent Developments in Solar Energy-Harvesting Technologies for Building Integration and Distributed Energy Generation

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on recent cutting-edge results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview of the current status and future application potential of multiple existing and emergent energy harvesting technologies for building integration is provided.

Semi-Transparent Energy-Harvesting Solar Concentrator Windows Employing Infrared Transmission-Enhanced Glass and Large-Area Microstructured Diffractive Elements

We report on the study of energy-harvesting performance in medium-size (400 cm2) glass-based semitransparent solar concentrators employing edge-mounted photovoltaic modules. Systems using several different types of glazing system architecture and containing embedded diffractive structures are prepared and characterized. The technological approaches to the rapid manufacture of large-area diffractive elements suitable for use in solar window-type concentrators are described. These elements enable the internal deflection and partial trapping of light inside glass-based concentrator windows. We focus on uncovering the potential of pattern-transfer polymer-based soft lithography for enabling both the improved photon collection probability at solar cell surfaces, and the up-scaling of semitransparent solar window dimensions. Results of photovoltaic characterization of several solar concentrators employing different internal glazing-system structure and diffractive elements produced using different technologies are reported and discussed.

Performance Limits of Luminescent Solar Concentrators Tested with Seed/Quantum-Well Quantum Dots in a Selective-Reflector-Based Optical Cavity

Luminescent solar concentrators (LSCs) can serve as large-area sunlight collectors for photovoltaic devices. An important LSC characteristic is a concentration factor (C), which is defined as the ratio of the output and the input photon flux densities. This parameter can be also thought of as an effective enlargement factor of a solar cell active area. On the basis of thermodynamic considerations, the C-factor can reach extremely high values that exceed those accessible with traditional concentrating optics. In reality, however, the best reported values of C are around 30. Here we demonstrate that using a new type of high-emissivity quantum dots (QDs) incorporated into a specially designed cavity, we are able to achieve the C of ∼62 for spectrally integrated emission and ∼120 for the red portion of the photoluminescence spectrum. The key feature of these QDs is a seed/quantum-well/thick-shell design, which allows for obtaining a high emission quantum yield (>95%) simultaneously with a large LSC quality factor (Q_LSC of ∼100) defined as the ratio of absorption coefficients at the wavelengths of incident and reemitted light. By incorporating the QDs into a specially designed cavity equipped with a top selective reflector (a Bragg mirror or a thin silver film), we are able to effectively recycle reemitted light achieving light trapping coefficients of ∼85%. The observed performance of these devices is in remarkable agreement with analytical modeling, which allows us to project that the applied approach should allow one to boost the spectrally integrated concentration factors to more than 100 by further improving light trapping and/or increasing Q_LSC.

Photonic microstructures for energy-generating clear glass and net-zero energy buildings

Transparent energy-harvesting windows are emerging as practical building-integrated photovoltaics (BIPV), capable of generating electricity while simultaneously reducing heating and cooling demands. By incorporating spectrally-selective diffraction gratings as light deflecting structures of high visible transparency into lamination interlayers and using improved spectrally-selective thin-film coatings, most of the visible solar radiation can be transmitted through the glass windows with minimum attenuation. At the same time, the ultraviolet (UV) and a part of incident solar infrared (IR) radiation energy are converted and/or deflected geometrically towards the panel edge for collection by CuInSe2 solar cells. Experimental results show power conversion efficiencies in excess of 3.04% in 10 cm × 10 cm vertically-placed clear glass panels facing direct sunlight, and up to 2.08% in 50 cm × 50 cm installation-ready framed window systems. These results confirm the emergence of a new class of solar window system ready for industrial application.

Highly transparent light-harvesting window film

We have simulated unique textured window films that capture solar radiation without compromising the window's transparency by scattering infrared light toward photovoltaic strips located at the edges of the window. These films are ideal for powering electrochromic glass, which is difficult to install as each window requires its own power source. Our most promising design consists of an embedded array of 35° cones coated with a five-layer SiO₂-Ag stack that was simulated to direct 1.4% of the incident light toward the edges and generate 1 W of power under a collimated 1000  W/m² AM1.5G source at 60° and an average of 0.5 W over a full year when applied to a 1  m×1  m window. The internal visible transmittance of the window with the applied film is 95% at normal incidence, and remains above 85% for viewing angles up to 60°. The haze is 0.6% at normal incidence and 3.9% at 60°.