1
|
Designing Tough Hydrogel Shells for Glucose Sensing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2310283. [PMID: 38227378 DOI: 10.1002/smll.202310283] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2023] [Revised: 12/26/2023] [Indexed: 01/17/2024]
Abstract
Conventional hydrogel microcapsules often suffer from inadequate mechanical stability, hindering their use. Here, water-cored double-network (DN) hydrogel shells are designed, formed by polyacrylamide and calcium alginate networks using triple-emulsion templates. These DN hydrogel shells offer robust mechanical stability, optical transparency, and a precisely-defined cut-off threshold. The feasibility of this platform is demonstrated through the development of a fluorometric glucose sensor. Glucose oxidase is enclosed within the water core, while a pH-responsive fluorescent dye is incorporated into the DN shells. Glucose diffuses into the core through the DN shells, where the glucose oxidase converts glucose into gluconic acid, leading to pH reduction and a subsequent decrease in fluorescence intensity of DN shells. Additionally, the pH-sensitive colorant dissolved in the medium enables visual pH assessment. Thus, glucose levels can be determined using both fluorometric and colorimetric methods. Notably, the DN shells exhibit exceptional stability, enduring intense mechanical stress and cycles of drying and rehydration without leakage. Moreover, the DN shells act as effective barriers, safeguarding glucose oxidase against proteolysis by large disruptive proteins, like pancreatin. This versatile DN shell platform extends beyond glucose oxidase encapsulation, serving as a foundation for various capsule sensors utilizing enzymes and heterogeneous catalysts.
Collapse
|
2
|
Structure-Function Studies of Glucose Oxidase in the Presence of Carbon Nanotubes and Bio-Graphene for the Development of Electrochemical Glucose Biosensors. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 14:85. [PMID: 38202540 PMCID: PMC10780548 DOI: 10.3390/nano14010085] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/04/2023] [Revised: 12/20/2023] [Accepted: 12/25/2023] [Indexed: 01/12/2024]
Abstract
In this work, we investigated the effect of multi-walled carbon nanotubes (MWCNTs) and bio-graphene (bG) on the structure and activity of glucose oxidase (GOx), as well as on the performance of the respective electrochemical glucose biosensors. Various spectroscopic techniques were applied to evaluate conformational changes in GOx molecules induced by the presence of MWCNTs and bG. The results showed that MWCNTs induced changes in the flavin adenine dinucleotide (FAD) prosthetic group of GOx, and the tryptophan residues were exposed to a more hydrophobic environment. Moreover, MWCNTs caused protein unfolding and conversion of α-helix to β-sheet structure, whereas bG did not affect the secondary and tertiary structure of GOx. The effect of the structural changes was mirrored by a decrease in the activity of GOx (7%) in the presence of MWCNTs, whereas the enzyme preserved its activity in the presence of bG. The beneficial properties of bG over MWCNTs on GOx activity were further supported by electrochemical data at two glucose biosensors based on GOx entrapped in chitosan gel in the presence of bG or MWCNTs. bG-based biosensors exhibited a 1.33-fold increased sensitivity and improved reproducibility for determining glucose over the sweat-relevant concentration range of glucose.
Collapse
|
3
|
Hexagonal-shaped graphene quantum plasmonic nano-antenna sensor. Sci Rep 2023; 13:19219. [PMID: 37932312 PMCID: PMC10628248 DOI: 10.1038/s41598-023-46164-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2023] [Accepted: 10/28/2023] [Indexed: 11/08/2023] Open
Abstract
In this manuscript, a hexagonal-shaped graphene quantum plasmonic nanopatch antenna sensor is designed and investigated on silicon dioxide, zinc oxide and silicon substrates for quantum plasmonic biosensing applications. The optical properties of graphene are demonstrated using Kubo modeling to analyze the plasmon resonance characteristics of the nanopatch antenna. Nano-circuit modeling of the hexagonal-shaped graphene nano-antenna is proposed and validated using CST simulations. The parametric analysis of the hexagonal-shaped nanopatch antenna is performed using design parameters such as R (radius of the hexagon), Tp (thickness of the hexagon) and µc (chemical potential of graphene) to obtain optimum characteristics suitable for quantum plasmonic sensing applications. The study demonstrates that the proposed hexagonal-shaped nano-antenna exhibits gain of 4.9 dBi, 2.46 dBi, 14.99 dBi, 8.25 dBi, 5.15 dBi, 10.87 dBi and 2.4 dBi at 29.87 THz, 30 THz, 35 THz, 113.5 THz, 132.5 THz, 85 THz and 24 THz, respectively. The field enhancement factors observed at these frequencies are 794, 779, 584, 255, 234, 654 and 217, respectively.
Collapse
|
4
|
Fiber-Type Transistor-Based Chemical and Physical Sensors Using Conjugated Polymers. Polymers (Basel) 2023; 15:4062. [PMID: 37896306 PMCID: PMC10609800 DOI: 10.3390/polym15204062] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2023] [Revised: 10/04/2023] [Accepted: 10/10/2023] [Indexed: 10/29/2023] Open
Abstract
Fiber-type electronics is a crucial field for realizing wearable electronic devices with a wide range of sensing applications. In this paper, we begin by discussing the fabrication of fibers from conjugated polymers. We then explore the utilization of these fibers in the development of field-effect and electrochemical transistors. Finally, we investigate the diverse applications of these fiber-type transistors, encompassing chemical and physical sensors. Our paper aims to offer a comprehensive understanding of the use of conjugated polymers in fiber-type transistor-based sensors.
Collapse
|
5
|
Non-invasive, ultrasensitive detection of glucose in saliva using metal oxide transistors. Biosens Bioelectron 2023; 237:115448. [PMID: 37348190 DOI: 10.1016/j.bios.2023.115448] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2023] [Revised: 05/06/2023] [Accepted: 06/02/2023] [Indexed: 06/24/2023]
Abstract
Transistor-based biosensors represent an emerging technology for inexpensive point-of-care testing (POCT) applications. However, the limited sensitivity of the current transistor technologies hinders their practical deployment. In this study, we developed tri-channel In2O3/ZnO heterojunction thin-film transistors (TFTs) featuring the surface-immobilized enzyme glucose oxidase to detect glucose in various biofluids. This unusual channel design facilitates strong coupling between the electrons transported along the buried In2O3/ZnO heterointerface and the electrostatic perturbations caused by the interactions between glucose and surface-immobilized glucose oxidase. The enzyme selectively binds to glucose, causing a change in charge density on the channel surface. By exploring this effect, the solid-state biosensing TFT (BioTFT) can selectively detect glucose in artificial and real saliva over a wide range of concentrations from 500 nM to 20 mM with limits of detection of ∼365 pM (artificial saliva) and ∼416 nM (real saliva) in less than 60 s. The specificity of the sensor towards glucose has been demonstrated against various interfering species in artificial saliva, further highlighting its unique capabilities. Moreover, the BioTFTs exhibited good operating stability upon storage for up to two weeks, with relative standard deviation (RSD) values ranging from 2.36% to 6.39% for 500 nM glucose concentration. Our BioTFTs are easy to manufacture with reliable operation, making them ideal for non-invasive POCT applications.
Collapse
|
6
|
Flexible Bio-Electronic Hybrid Metal-Oxide Channel FET as a Glucose Sensor. IEEE Trans Nanobioscience 2023; 22:855-862. [PMID: 37018717 DOI: 10.1109/tnb.2023.3236460] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/13/2023]
Abstract
A high-sensitivity flexible field-effect transistor (FET) based glucose sensor is fabricated that can surpass the conventional electrochemical glucometers in terms of sensitivity, limit of detection, and other performance parameters. The proposed biosensor is based on the FET operation with the advantage of amplification which provides a high sensitivity and a very low limit of detection. Hybrid metal oxide (ZnO and CuO) nanostructures have been synthesized in the form of hollow spheres (ZnO/CuO-NHS). The FET was fabricated by depositing ZnO/CuO-NHS on the interdigitated electrodes. Glucose oxidase (GOx) was immobilized successfully on the ZnO/CuO-NHS. Three different outputs of the sensor are examined, the FET current, the relative current change, and the drain voltage. The sensitivity of the sensor for each output type has been calculated. The readout circuit can convert the current change to the voltage change that has been used for wireless transmission. The sensor has a very low limit of detection of 30 nM with satisfactory reproducibility, good stability, and high selectivity. The electrical response of the FET biosensor towards the real human blood serum samples demonstrated that it can be offered as a potential device for glucose detection in any medical application.
Collapse
|
7
|
Electrochemically-gated graphene broadband microwave waveguides for ultrasensitive biosensing. NANOSCALE 2023; 15:15304-15317. [PMID: 37682040 DOI: 10.1039/d3nr01239e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/09/2023]
Abstract
Identification of non-amplified DNA sequences and single-base mutations is essential for molecular biology and genetic diagnostics. This paper reports a novel sensor consisting of electrochemically-gated graphene coplanar waveguides coupled with a microfluidic channel. Upon exposure to analytes, propagation of electromagnetic waves in the waveguides is modified as a result of interactions with the fringing field and modulation of graphene dynamic conductivity resulting from electrostatic gating. Probe DNA sequences are immobilised on the graphene surface, and the sensor is exposed to DNA sequences which either perfectly match the probe, contain a single-base mismatch or are unrelated. By monitoring the scattering parameters at frequencies between 50 MHz and 50 GHz, unambiguous and reproducible discrimination of the different strands is achieved at concentrations as low as one attomole per litre (1 aM). By controlling and synchronising frequency sweeps, electrochemical gating, and liquid flow in the microfluidic channel, the sensor generates multidimensional datasets. Advanced data analysis techniques are utilised to take full advantage of the richness of the dataset. A classification accuracy >97% between all three sequences is achieved using different Machine Learning models, even in the presence of simulated noise and low signal-to-noise ratios. The sensor exceeds state-of-the-art sensitivity of field-effect transistors and microwave sensors for the identification of single-base mismatches.
Collapse
|
8
|
A sensitive and facile electrochemical paper-based sensor for glucose detection in whole blood using the Pd/CB-Ni@rGO modified electrode. Analyst 2023; 148:4753-4761. [PMID: 37655604 DOI: 10.1039/d3an00879g] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/02/2023]
Abstract
We created novel Pd/CB-Ni@rGO nanomaterials for glucose detection. The as-synthesized nanomaterials were dropped on the electrode surface using the drop casting technique. The prepared electrode was then attached to a paper-based device containing the sample zone and the reaction zone, enabling plasma isolation and an enzymatic reaction for glucose detection in whole blood. The nanomaterials and surfaces of electrodes were characterized by FTIR, TEM, and SEM. The proposed approach is a disposable glucose detection method that is unaffected by protein fouling on the electrode, and it requires only one drop of human blood. Therefore, there is no need for extensive sample preparation, and there is less sample consumption. Under optimal conditions, Pd/CB-Ni@rGO can accurately measure blood glucose levels with a linear range of 7 to 7140 μM (R2 = 0.9986) and a low detection limit of 0.82 μM. Besides, the developed sensor shows excellent anti-interference capacity, stability, and satisfactory reproducibility and repeatability. Importantly, Pd/CB-Ni@rGO was successfully applied for glucose in whole blood from 4 volunteers, with results that correlated well with those obtained using an Accucheck glucometer at a 95% confidence level. Given its low cost, high accuracy, and ease of use, the blood glucose sensor holds significant potential for clinical use and broadens the area of future noninvasive sensor development.
Collapse
|
9
|
The Use of Crystalline Carbon-Based Nanomaterials (CBNs) in Various Biomedical Applications. CRYSTALS 2023; 13:1236. [DOI: 10.3390/cryst13081236] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/11/2023]
Abstract
This review study aims to present, in a condensed manner, the significance of the use of crystalline carbon-based nanomaterials in biomedical applications. Crystalline carbon-based nanomaterials, encompassing graphene, graphene oxide, reduced graphene oxide, carbon nanotubes, and graphene quantum dots, have emerged as promising materials for the development of medical devices in various biomedical applications. These materials possess inorganic semiconducting attributes combined with organic π-π stacking features, allowing them to efficiently interact with biomolecules and present enhanced light responses. By harnessing these unique properties, carbon-based nanomaterials offer promising opportunities for future advancements in biomedicine. Recent studies have focused on the development of these nanomaterials for targeted drug delivery, cancer treatment, and biosensors. The conjugation and modification of carbon-based nanomaterials have led to significant advancements in a plethora of therapies and have addressed limitations in preclinical biomedical applications. Furthermore, the wide-ranging therapeutic advantages of carbon nanotubes have been thoroughly examined in the context of biomedical applications.
Collapse
|
10
|
Bionic Tactile-Gustatory Receptor for Object Identification Based on All-Polymer Electrochemical Transistor. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2300242. [PMID: 37025036 DOI: 10.1002/adma.202300242] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/09/2023] [Revised: 04/01/2023] [Indexed: 06/16/2023]
Abstract
Human sensory receptors enable the real world to be perceived effortlessly. Hence, massive efforts have been devoted to the development of bionic receptors capable of identifying objects. Unfortunately, most of the existing devices are limited to single sensory emulation and are established on solid-state electronic technologies, which are incompatible with the biological reactions occurring in electrolyte media. Here, an iontronic tactile-gustatory receptor using an all-polymer electrochemical transistor (AECT) is presented. The sensor is biocompatible with the operation voltage of 0.1 V, which is 1 to 2 orders lower than those of reported values. By this study, one receptor is able to accurately recognize various objects perceived by the human tactile and gustatory system without complex circuitry. Additionally, to promote its further application, flexible AECT arrays with channel length of 2 µm and density of 104 167 transistors cm-2 (yield of 97%) are fabricated, 1 to 5 orders higher than those of related works. Finally, a flexible integrated network for electrocardiogram recording is successfully constructed. This study moves a step forward toward state-of-the-art bionic sensors.
Collapse
|
11
|
Design of a novel aptamer/molecularly imprinted polymer hybrid modified Ag-Au@Insulin nanoclusters/Au-gate-based MoS 2 nanosheet field-effect transistor for attomolar detection of BRCA1 gene. Talanta 2023; 257:124394. [PMID: 36858016 DOI: 10.1016/j.talanta.2023.124394] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/16/2022] [Revised: 01/23/2023] [Accepted: 02/22/2023] [Indexed: 03/01/2023]
Abstract
Early detection of breast cancer, the first main cause of death in women, with robust assay platforms using appropriate biomarkers is of great importance for diagnosis and follow-up of the disease progression. This paper introduces an extra selective and sensitive label-free aptasensor for the screening of BRCA1 gene biomarker by taking advantage of a gate modified with aptamer and molecularly imprinted polymer hybrid (MIP) as a new synthetic receptor film coupled with an electrolyte-gated molybdenum disulfide (MoS2) field-effect transistor (FET). The Au gate surface of FET was modified with insulin stabilized bimetallic Ag-Au@nanoclusters (Ag-Au@InsNCs), after which, the immobilization of the hybridized aptamer and o-phenylenediamine was electropolymerized to form an aptamer-MIP hybrid receptor. The output characteristics of Apta-MIP hybrid modified Au gate MoS2 FET device were followed as a result of change in electrical double layer capacitance of electrolye-gate interface. The magnitude of decrease in the drain current showed a linear response over a wide concentration range of 10 aM to 1 nM of BRCA1 ssDNA with a sensitivity as high as 0.4851 μA/decade of concentration and a limit of detection (LOD) of 3.0 aM while very low responses observed for non-imprinted polymer. The devised aptasensor not only was capable to the discrimination of the complementary versus one-base mismatch BRCA1 ssDNA sequence, but also it could detect the complementary BRCA1 ssDNA in spiked human serum samples over a wide concentration range of 10 aM to 1.0 nM with a low LOD of 6.4 aM and a high sensitivity 0.3718 μA/decade.
Collapse
|
12
|
Does Green Exfoliation of Graphene Produce More Biocompatible Structures? Pharmaceutics 2023; 15:pharmaceutics15030993. [PMID: 36986854 PMCID: PMC10051938 DOI: 10.3390/pharmaceutics15030993] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2023] [Revised: 03/10/2023] [Accepted: 03/16/2023] [Indexed: 03/30/2023] Open
Abstract
Graphene has been studied thoroughly for its use in biomedical applications over the last decades. A crucial factor for a material to be used in such applications is its biocompatibility. Various factors affect the biocompatibility and toxicity of graphene structures, including lateral size, number of layers, surface functionalization, and way of production. In this work, we tested that the green production of few-layer bio-graphene (bG) enhances its biocompatibility compared to chemical-graphene (cG). When tested against three different cell lines in terms of MTT assays, both materials proved to be well-tolerated at a wide range of doses. However, high doses of cG induce long-term toxicity and have a tendency for apoptosis. Neither bG nor cG induced ROS generation or cell cycle modifications. Finally, both materials affect the expression of inflammatory proteins such as Nrf2, NF-kB and HO-1 but further research is required for a safe result. In conclusion, although there is little to choose between bG and cG, bG's sustainable way of production makes it a much more attractive and promising candidate for biomedical applications.
Collapse
|
13
|
Graphene-Based Field-Effect Transistors in Biosensing and Neural Interfacing Applications: Recent Advances and Prospects. Anal Chem 2023; 95:2590-2622. [PMID: 36693046 DOI: 10.1021/acs.analchem.2c03399] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
|
14
|
Unamplified and Real-Time Label-Free miRNA-21 Detection Using Solution-Gated Graphene Transistors in Prostate Cancer Diagnosis. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2205886. [PMID: 36480308 PMCID: PMC9896035 DOI: 10.1002/advs.202205886] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/10/2022] [Revised: 11/15/2022] [Indexed: 06/17/2023]
Abstract
The incidence of prostate cancer (PCa) in men globally increases as the standard of living improves. Blood serum biomarker prostate-specific antigen (PSA) detection is the gold standard assay that do not meet the requirements of early detection. Herein, a solution-gated graphene transistor (SGGT) biosensor for the ultrasensitive and rapid quantification detection of the early prostate cancer-relevant biomarker, miRNA-21 is reported. The designed single-stranded DNA (ssDNA) probes immobilized on the Au gate can hybridize effectively with the miRNA-21 molecules targets and induce the Dirac voltage shifts of SGGT transfer curves. The limit of detection (LOD) of the sensor can reach 10-20 M without amplification and any chemical or biological labeling. The detection linear range is from 10-20 to 10-12 M. The sensor can realize real-time detection of the miRNA-21 molecules in less than 5 min and can well distinguish one-mismatched miRNA-21 molecule. The blood serum samples from the patients without RNA extraction and amplification are measured. The results demonstrated that the biosensor can well distinguish the cancer patients from the control group and has higher sensitivity (100%) than PSA detection (58.3%). Contrastingly, it can be found that the PSA level is not directly related to PCa.
Collapse
|
15
|
Advances in 2d Based Field Effect Transistors as Biosensing Platforms: From Principle to Biomedical Applications. Microchem J 2023. [DOI: 10.1016/j.microc.2023.108432] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023]
|
16
|
Blood glucose sensing by back gated transistor strips sensitized by CuO hollow spheres and rGO. Sci Rep 2022; 12:21872. [PMID: 36536057 PMCID: PMC9763381 DOI: 10.1038/s41598-022-26287-8] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2022] [Accepted: 12/13/2022] [Indexed: 12/23/2022] Open
Abstract
In this work, a highly sensitive flexible glucose sensor based on a field effect transistor (FET) has been fabricated. It is shown that the proposed flexible transistor can be used as new non-enzymatic blood glucose test strips. CuO hollow-spheres decorated with reduced graphene oxide have been synthesized using the hydrothermal method. The shells of the hollow micro-spheres are formed by nanostructures. The synthesized nanostructured hollow micro-spheres (rGO/CuO-NHS) are deposited on a flexible PET substrate between interdigitated electrodes as the channel of a back gate transistor. The channel concentration and the FET bias are optimized so that the sensor exhibits extremely low limit of detection and high sensitivity. The combination of selective porous CuO hollow spheres and the high surface to volume ratio of their nanostructured shells with the high mobility and high conductivity rGO led to faster and higher charge-transfer capability and superior electro-catalyst activity for glucose oxidation. The glucose-dependent electrical responses of the sensor is measured in both resistive and transistor action modes. The amplification of the current by the induced electric field of the gate in the proposed FET-based biosensor provides advantages such as higher sensitivity and lower limit of detection compared to the resistive sensor. The flexible glucose sensor has a sensitivity of 600 μA μM-1 and a limit of detection of 1 nM with high reproducibility, good stability, and highly selectivity. The high accuracy response of the biosensor towards the real blood serum samples showed that it can be used as a test strip for glucose detection in real blood samples.
Collapse
|
17
|
Cu and Ni Co-sputtered heteroatomic thin film for enhanced nonenzymatic glucose detection. Sci Rep 2022; 12:7507. [PMID: 35525846 PMCID: PMC9079054 DOI: 10.1038/s41598-022-11563-4] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/13/2022] [Accepted: 04/26/2022] [Indexed: 11/30/2022] Open
Abstract
In this work, we report a wafer-scale and chemical-free fabrication of nickel (Ni) and copper (Cu) heteroatomic Cu–Ni thin films using RF magnetron sputtering technique for non-enzymatic glucose sensing application. The as-prepared wafer-scale Cu–Ni thin films exhibits excellent electrocatalytic activity toward glucose oxidation with a 1.86 μM detection limit in the range of 0.01 mM to 20 mM range. The Cu–Ni film shows 1.3- and 5.4-times higher glucose oxidation activity in comparison to the Cu and Ni electrodes, respectively. The improved electrocatalytic activity is attributed to the synergistic effect of the bimetallic catalyst and high density of grain boundaries. The Cu–Ni electrodes also possessed excellent anti-interference characteristics. These results indicate that Cu–Ni heteroatomic thin film can be a potential candidate for the development of non-enzymatic glucose biosensor because of its chemical free synthesis, excellent reproducibility, reusability, and long-term stability.
Collapse
|
18
|
Breath alcohol sensor based on hydrogel-gated graphene field-effect transistor. Biosens Bioelectron 2022; 210:114319. [PMID: 35512582 DOI: 10.1016/j.bios.2022.114319] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2022] [Revised: 04/21/2022] [Accepted: 04/22/2022] [Indexed: 01/23/2023]
Abstract
The inspection of drunk driving has become an effective measure to reduce the occurrence of traffic accidents. In this work, we constructed a breath alcohol biosensor based on a hydrogel-gated graphene field-effect transistor (HGGT) with chlorella derived layered carbon nanosheets (CNs) and alcohol oxidase (AOx) embedded in the hydrogel. The sensing mechanism of the AOx/CNs functionalized sensor lies in the oxidation reaction of alcohol by AOx and the electrocatalytic oxidation reaction of the generated H2O2. The HGGT based alcohol sensor exhibited an excellent sensitivity with a very low detection limit down to 1 μM (i.e. 0.046 ppm), and has been successfully applied to breath alcohol test after drinking. Compared with normal solution-gated graphene transistors, employment of hydrogel as a source of electrolytes greatly enhances the portability of the sensor, and facilitates functionalization with enzymes and nanomaterials. Due to the advantages of real-time, high portability and accuracy of the functionalized HGGT sensor, it demonstrates a promising platform for constructing biosensors for many other analytes.
Collapse
|
19
|
Ultrasensitive Label-Free DNA Detection Based on Solution-Gated Graphene Transistors Functionalized with Carbon Quantum Dots. Anal Chem 2022; 94:3320-3327. [PMID: 35147418 DOI: 10.1021/acs.analchem.1c05309] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Developing highly sensitive, reliable, cost-effective label-free DNA biosensors is challenging with traditional fluorescence, electrochemical, and other techniques. Most conventional methods require labeling fluorescence, enzymes, or other complex modification. Herein, we fabricate carbon quantum dot (CQD)-functionalized solution-gated graphene transistors for highly sensitive label-free DNA detection. The CQDs are immobilized on the surface of the gate electrode through mercaptoacetic acid with the thiol group. A single-stranded DNA (ssDNA) probe is immobilized on CQDs by strong π-π interactions. The ssDNA probe can hybridize with the ssDNA target and form double-stranded DNA, which led to a shift of Dirac voltage and the channel current response. The limit of detection can reach 1 aM which is 2-5 orders of magnitude lower than those of other methods reported previously. The sensor also exhibits a good linear range from 1 aM to 0.1 nM and has good specificity. It can effectively distinguish one-base mismatched target DNA. The response time is about 326 s for the 1 aM target DNA molecules. This work provides good perspectives on the applications in biosensors.
Collapse
|
20
|
Label-free detection of Cu(II) in fish using a graphene field-effect transistor gated by structure-switching aptamer probes. Talanta 2022; 237:122965. [PMID: 34736690 DOI: 10.1016/j.talanta.2021.122965] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2021] [Revised: 10/08/2021] [Accepted: 10/11/2021] [Indexed: 11/25/2022]
Abstract
Copper sulfate is a widely used agent to control insects, bacteria and algae for fishery. However, excess amount of copper ions in water accumulate in aquatic products through the ecological cycle system, highly threatening food safety and public health. Therefore, it is urgent to develop a rapid and efficient method for the determination of copper content in aquatic products. In this study, we developed a label-free biosensor for Cu(II) based on a graphene field-effect transistor gated by structure-switching aptamer probes (SSA-GFET) against Cu(II) we obtained before. The detection mechanism of the biosensor is attributed to the surface charge shift and the potential change of the gate electrode upon the specific binding of Cu(II). The SSA-GFET biosensor has a low detection limit of 10 nM and a linear range of 10 nM to 3 μM to Cu(II). In addition to the excellent selectivity to Cu(II), the biosensor also showes the advantage of high recovery rate for detection of Cu(II) in real fish samples. Because of the detection characteristics of label-free SSA-GFET, it has great advantages in the field of food safety and environmental detection.
Collapse
|
21
|
Label-free biosensing of mercury(II) in milk using an aptamer-gated graphene field-effect transistor. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2021.115931] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
22
|
Nanomaterial-Based Biosensors using Field-Effect Transistors: A Review. JOURNAL OF ELECTRONIC MATERIALS 2022; 51:1950-1973. [PMID: 35250154 PMCID: PMC8881998 DOI: 10.1007/s11664-022-09492-z] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2021] [Accepted: 02/01/2022] [Indexed: 05/05/2023]
Abstract
Field-effect transistor biosensors (Bio-FET) have attracted great interest in recent years owing to their distinctive properties like high sensitivity, good selectivity, and easy integration into portable and wearable electronic devices. Bio-FET performance mainly relies on the constituent components such as the bio-recognition layer and the transducer, which ensures device stability, sensitivity, and lifetime. Nanomaterial-based Bio-FETs are excellent candidates for biosensing applications. This review discusses the basic concepts, function, and working principles of Bio-FETs, and focuses on the progress of recent research in Bio-FETs in the sensing of neurotransmitters, glucose, nucleic acids, proteins, viruses, and cancer biomarkers using nanomaterials. Finally, challenges in the development of Bio-FETs, as well as an outlook on the prospects of nano Bio-FET-based sensing in various fields, are discussed.
Collapse
|
23
|
Advances in Medical Wearable Biosensors: Design, Fabrication and Materials Strategies in Healthcare Monitoring. Molecules 2021; 27:165. [PMID: 35011400 PMCID: PMC8746599 DOI: 10.3390/molecules27010165] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2021] [Revised: 12/19/2021] [Accepted: 12/23/2021] [Indexed: 12/15/2022] Open
Abstract
In the past decade, wearable biosensors have radically changed our outlook on contemporary medical healthcare monitoring systems. These smart, multiplexed devices allow us to quantify dynamic biological signals in real time through highly sensitive, miniaturized sensing platforms, thereby decentralizing the concept of regular clinical check-ups and diagnosis towards more versatile, remote, and personalized healthcare monitoring. This paradigm shift in healthcare delivery can be attributed to the development of nanomaterials and improvements made to non-invasive biosignal detection systems alongside integrated approaches for multifaceted data acquisition and interpretation. The discovery of new biomarkers and the use of bioaffinity recognition elements like aptamers and peptide arrays combined with the use of newly developed, flexible, and conductive materials that interact with skin surfaces has led to the widespread application of biosensors in the biomedical field. This review focuses on the recent advances made in wearable technology for remote healthcare monitoring. It classifies their development and application in terms of electrochemical, mechanical, and optical modes of transduction and type of material used and discusses the shortcomings accompanying their large-scale fabrication and commercialization. A brief note on the most widely used materials and their improvements in wearable sensor development is outlined along with instructions for the future of medical wearables.
Collapse
|
24
|
Advances on ultra-sensitive electrospun nanostructured electrochemical and colorimetric sensors for diabetes mellitus detection. NANO MATERIALS SCIENCE 2021. [DOI: 10.1016/j.nanoms.2021.05.001] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
25
|
Transistor-Based Biomolecule Sensors: Recent Technological Advancements and Future Prospects. Crit Rev Anal Chem 2021; 53:1044-1065. [PMID: 34788167 DOI: 10.1080/10408347.2021.2002133] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/21/2023]
Abstract
Transistor-based sensors have been widely recognized to be highly sensitive and reliable for point-of-care/bed-side diagnosis. In this line, a range of cutting-edge technologies has been generated to elevate the role of transistors for biomolecule detection. Detection of a wide range of clinical biomarkers has been reported using various configurations of transistors. The inordinate sensitivity of transistors to the field-effect imparts high sensitivity toward wide range of biomolecules. This overview has gleaned the present achievements with the technological advancements using high performance transistor-based sensors. This review encloses transistors incorporated with a variety of functional nanomaterials and organic elements for their excellence in selectivity and sensitivity. In addition, the technological advancements in fabrication of these microdevices or nanodevices and functionalization of the sensing elements have also been discussed. The technological gap in the realization of sensors in transistor platforms and the resulted scope for research has been discussed. Finally, foreseen technological advancements and future research perspectives are described.
Collapse
|
26
|
Aptamer-Based Solution-Gated Graphene Transistors for Highly Sensitive and Real-Time Detection of Thrombin Molecules. Anal Chem 2021; 93:13673-13679. [PMID: 34597019 DOI: 10.1021/acs.analchem.1c03129] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Thrombin is an important biomarker for various diseases and biochemical reactions. Rapid and real-time detection of thrombin that quickly neutralizes in early coagulation in the body has gained significant attention for its practical applications. Solution-gated graphene transistors (SGGTs) have been widely studied due to their higher sensitivity and low-cost fabrication for chemical and biological sensing applications. In this paper, the ssDNA aptamer with 29 bases was immobilized on the surface of the gate electrode to specifically recognize thrombin. The SGGT sensor achieved high sensitivity with a limit of detection (LOD) up to fM. The LOD was attributed to the amplification function of SGGTs and the suitable aptamer choice. The ssDNA configuration folding induced by thrombin molecules and the electropositivity of thrombin molecules could arouse the same electrical response of SGGTs, helping the device obtain a high sensitivity. The channel current variation of sensors had a good linear relationship with the logarithm of thrombin concentration in the range of 1 fM to 10 nM. The fabricated device also demonstrated a short response time to thrombin molecules, and the response time to the 1 fM thrombin molecules was about 150 s. In summary, the sensing strategy of aptamer-based SGGTs with high sensitivity and high selectivity has a good prospect in medical diagnosis.
Collapse
|
27
|
DNA-Gated Graphene Field-Effect Transistors for Specific Detection of Arsenic(III) in Rice. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2021; 69:1398-1404. [PMID: 33433214 DOI: 10.1021/acs.jafc.0c07052] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
As one of the most toxic forms of arsenic, inorganic As(III) is easy to accumulate in rice, leading to severe public health problems. Effective control of As(III) requires the development of fast analytical methods for its detection with high sensitivity and specificity. Toward this end, in this work, we report the fabrication of an As(III) electrochemical sensor based on a solution-gated graphene transistor (SGGT) platform with a novel sensing mechanism. The gold gate electrode of the SGGT was modified with DNA probes and then blocked with bovine serum albumin (BSA). The specific interaction between As(III) and gold disrupted the adsorption states of DNA probes, redistributing surface charges on the gate electrode, further leading to potential drop changes at the interfaces of the gate electrode and graphene active layer. This new mechanism based on DNA-charge-redistribution-induced SGGT current responses (denoted as "DNA-SGGT") was found to greatly improve the selectivity of the sensor: the response of DNA-SGGT to As(III) was effectively enhanced fourfold, while to other interfering cations, it was significantly reduced. The optimized sensor showed a detection limit as low as 5 nM with superior selectivity to As(III). The as-prepared DNA-SGGT-based sensor has also been successfully applied to the detection of As(III) in practical rice samples with a high recovery rate, showing great potential for heavy metal detection in many types of food samples.
Collapse
|
28
|
Solid State Sensors for Hydrogen Peroxide Detection. BIOSENSORS 2020; 11:9. [PMID: 33375685 PMCID: PMC7823577 DOI: 10.3390/bios11010009] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/19/2020] [Revised: 12/15/2020] [Accepted: 12/22/2020] [Indexed: 11/16/2022]
Abstract
Hydrogen peroxide (H2O2) is a key molecule in numerous physiological, industrial, and environmental processes. H2O2 is monitored using various methods like colorimetry, luminescence, fluorescence, and electrochemical methods. Here, we aim to provide a comprehensive review of solid state sensors to monitor H2O2. The review covers three categories of sensors: chemiresistive, conductometric, and field effect transistors. A brief description of the sensing mechanisms of these sensors has been provided. All three sensor types are evaluated based on the sensing parameters like sensitivity, limit of detection, measuring range and response time. We highlight those sensors which have advanced the field by using innovative materials or sensor fabrication techniques. Finally, we discuss the limitations of current solid state sensors and the future directions for research and development in this exciting area.
Collapse
|
29
|
Abstract
Owing to its high sensitivity, a solution-gated graphene transistor has rapidly emerged as a cutting edge technology in electrochemical sensing. In this work, composites of gold nanoparticles and reduced graphene oxide were synthesized on a glassy carbon electrode by using the electrodeposition method. A modified glassy carbon electrode was used as the gate electrode and assembled into the solution-gated graphene transistor device along with the graphene channel for a non-invasive glucose detection. The sensing mechanism was based on the change in current in the channel of the device caused by the addition of glucose, of which electro-oxidation on the surface of the gold nanoparticles and reduced graphene oxide led to a change in equivalent gate voltage, and consequently, affected the channel carrier concentration. The self-amplification effect of transistors was utilized in our sensors, which resulted in a detection limit that was 10 times lower than those of conventional electrochemical sensors. Compared to traditional enzymatic transistor sensors, the novel solution-gated graphene transistor nonenzymatic sensors based on gold nanoparticles and reduced graphene oxide demonstrated significant sensing advantages, such as a simple structure, wide linear range from 10 μM to 400 μM and 400 μM to 31 mM, and low detection limit down to 4 μM. The chemicals coexisting in human sweat e.g. sodium chloride, urea, and lactic acid imposed no distinct interference for the glucose detection. Therefore, we achieved a non-invasive detection of glucose in the artificial sweat samples with satisfactory sensing results. This work demonstrates an effective route for non-invasive glucose testing in practical clinical diagnosis by using nonenzymatic, solution-gated graphene transistor devices.
Collapse
|
30
|
Highly sensitive methyl parathion sensor based on Au-ZrO2 nanocomposites modified graphene electrochemical transistor. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2020.136836] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
31
|
Solvothermal synthesis of Fe 3O 4 nanospheres for high-performance electrochemical non-enzymatic glucose sensor. Sci Rep 2020; 10:16026. [PMID: 32994458 PMCID: PMC7524729 DOI: 10.1038/s41598-020-73090-4] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/24/2020] [Accepted: 09/10/2020] [Indexed: 11/26/2022] Open
Abstract
Ferroferric oxide (Fe3O4) nanospheres have been synthesized via a facile solvothermal procedure to serve as an electrode material for high performance non-enzymatic glucose sensor. The as-synthesized Fe3O4 nanospheres with a uniform size from 16 to 18 nm, which can increase the reaction contact area and the active sites in the process of glucose detection. Benefiting from the particular nanoscale structure, the Fe3O4 nanospheres obviously enhanced the activity of electrocatalytic oxidation towards glucose. When the Fe3O4 nanospheres material was used for non-enzymatic glucose sensor, several electrochemical properties including the high sensitivity 6560 μA mM-1 cm-2 (0.1-1.1 mM), limit of detection 33 μM (S/N = 3) and good long-term stability were well demonstrated. Furthermore, Fe3O4 nanospheres electrode confirmed the excellent performance of selectivity in glucose detection with the interfering substances existed such as urea, citric acid, ascorbic acid, and NaCl. Due to the excellent electrocatalytic activity in alkaline solution, the Fe3O4 nanospheres material can be considered as a promising candidate in blood glucose monitoring.
Collapse
|
32
|
Superficial Edge Effect of N 2-Doped Nanodiamond on the Highly Stable Nonenzymatic Glucose Detection Properties of Dispersed Graphene Flakes/Ni Nanostructures. ACS APPLIED BIO MATERIALS 2020; 3:5966-5973. [DOI: 10.1021/acsabm.0c00639] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
33
|
A New Possibility for Fermentation Monitoring by Electrical Driven Sensing of Ultraviolet Light and Glucose. BIOSENSORS-BASEL 2020; 10:bios10080097. [PMID: 32806501 PMCID: PMC7459838 DOI: 10.3390/bios10080097] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/22/2020] [Revised: 07/21/2020] [Accepted: 07/23/2020] [Indexed: 12/14/2022]
Abstract
Industrial fermentation generates products through microbial growth associated with the consumption of substrates. The efficiency of industrial production of high commercial value microbial products such as ethanol from glucose (GLU) is dependent on bacterial contamination. Controlling the sugar conversion into products as well as the sterility of the fermentation process are objectives to be considered here by studying GLU and ultraviolet light (UV) sensors. In this work, we present two different approaches of SnO2 nanowires grown by the Vapor–Liquid–Solid (VLS) method. In the GLU sensor, we use SnO2 nanowires as active electrodes, while for the UV sensor, a nanowire film was built for detection. The results showed a wide range of GLU sensing and as well as a significant influence of UV in the electrical signal. The effect of a wide range of GLU concentrations on the responsiveness of the sensor through current–voltage based on SnO2 nanowire films under different concentration conditions ranging was verified from 1 to 1000 mmol. UV sensors show a typical amperometric response of SnO2 nanowires under the excitation of UV and GLU in ten cycles of 300 s with 1.0 V observing a stable and reliable amperometric response. GLU and UV sensors proved to have a promising potential for detection and to control the conversion of a substrate into a product by GLU control and decontamination by UV control in industrial fermentation systems.
Collapse
|
34
|
Solution-gated transistors of two-dimensional materials for chemical and biological sensors: status and challenges. NANOSCALE 2020; 12:11364-11394. [PMID: 32428057 DOI: 10.1039/d0nr01125h] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Two-dimensional (2D) materials have been the focus of materials research for many years due to their unique fascinating properties and large specific surface area (SSA). They are very sensitive to the analytes (ions, glucose, DNA, protein, etc.), resulting in their wide-spread development in the field of sensing. New 2D materials, as the basis of applications, are constantly being fabricated and comprehensively studied. In a variety of sensing applications, the solution-gated transistor (SGT) is a promising biochemical sensing platform because it can work at low voltage in different electrolytes, which is ideal for monitoring body fluids in wearable electronics, e-skin, or implantable devices. However, there are still some key challenges, such as device stability and reproducibility, that must be faced in order to pave the way for the development of cost-effective, flexible, and transparent SGTs with 2D materials. In this review, the device preparation, device physics, and the latest application prospects of 2D materials-based SGTs are systematically presented. Besides, a bold perspective is also provided for the future development of these devices.
Collapse
|
35
|
Characteristics of an Extended Gate Field-Effect Transistor for Glucose Sensing Using an Enzyme-Containing Silk Fibroin Membrane as the Bio-Chemical Component. BIOSENSORS 2020; 10:E57. [PMID: 32485863 PMCID: PMC7345748 DOI: 10.3390/bios10060057] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/30/2020] [Revised: 05/19/2020] [Accepted: 05/27/2020] [Indexed: 11/17/2022]
Abstract
The characteristics of a glucose sensor based on an ion-sensitive TiO2/Ti extended gate electrode field-effect transistor (EGFET) are reported. A glucose oxidase-containing silk fibroin membrane was immobilized on a TiO2/Ti surface as the bio-sensing component. This EGFET-type biosensor was estimated to be able to detect a glucose concentration as low as 0.001 mg/mL in an aqueous electrolyte, which enables the sensing of glucose in the saliva and sweat. The endurance of this sensor was also examined, and it was found that the retention time of the original sensitivity for repeated use at room temperature was more than 30 days, with a high heat tolerance temperature close to 60 °C.
Collapse
|
36
|
Tear Glucose Measurement by Reflectance Spectrum of a Nanoparticle Embedded Contact Lens. Sci Rep 2020; 10:8254. [PMID: 32427894 PMCID: PMC7237479 DOI: 10.1038/s41598-020-65103-z] [Citation(s) in RCA: 26] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/29/2019] [Accepted: 04/17/2020] [Indexed: 11/08/2022] Open
Abstract
Glucose level is a primary indicator in the diagnosis and treatment of diabetes mellitus. According to the correlation between glucose concentration in blood and tears, measuring tear glucose can be an alternative to traditional strips test for blood glucose. Thus, measuring tear glucose levels could provide noninvasive monitoring of blood glucose. As a biocompatible biosensor, a nanoparticle embedded contact lens (NECL) is developed which is composed of glucose oxidase and cerium oxide (III). Using spectroscopy, we found the detectable changes in reflection spectrum of contact lenses with respect to the glucose concentration, and developed correlation curve of the reflection spectrum with known glucose level. Furthermore, we assessed tear glucose level and compared blood glucose level with the diabetic mouse model to evaluate this approach. Our algorithm for regular monitoring of glucose using contact lens biosensor may lead to noninvasive monitoring of tear glucose level. NECL may provide simple and noninvasive glucose monitoring based on the spectral changes in contact lens biosensor.
Collapse
|
37
|
Reduced‐Graphene‐Oxide‐Based Needle‐Type Field‐Effect Transistor for Dopamine Sensing. ChemElectroChem 2020. [DOI: 10.1002/celc.202000162] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
38
|
Structural, optical and electrical properties of Cu:MnO2 nanostructured thin films for glucose sensitivity measurements. SN APPLIED SCIENCES 2020. [DOI: 10.1007/s42452-020-2191-8] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022] Open
|
39
|
Single-Atom Enzyme-Functionalized Solution-Gated Graphene Transistor for Real-Time Detection of Mercury Ion. ACS APPLIED MATERIALS & INTERFACES 2020; 12:6268-6275. [PMID: 31933362 DOI: 10.1021/acsami.9b19434] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Mercury ion (Hg2+), a bioaccumulating and toxic heavy metal, can cause severe damages to the environment and human health. Therefore, development of high-performance Hg2+ sensors is highly desirable. Herein, we construct a uniform dodecahedral shaped N-doped carbon decorated by single Fe site enzyme (Fe-N-C SAE), which exhibits good performance for Hg2+ detection. The N atom on Fe-N-C SAE can specifically recognize Hg2+ through chelation between Hg2+ and N atom, while the catalytic site on the single-atom enzyme acts as a signal amplifier. The Fe-N-C SAE-functionalized solution-gated graphene transistor exhibits a dramatic improvement in the selectivity and sensitivity of the devices. The sensor can rapidly detect Hg2+ down to 1 nM within 2 s. Besides, a relatively good repeatability and reproducibility for the detection of Hg2+ have also been found in our sensor platform. Our findings expand the application of single-atom catalysts in the field of food safety and environmental monitoring.
Collapse
|
40
|
Novel multifunctional molecular recognition elements based on molecularly imprinted poly (aniline-co-itaconic acid) composite thin film for melamine electrochemical detection. SENSING AND BIO-SENSING RESEARCH 2020. [DOI: 10.1016/j.sbsr.2019.100318] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/25/2022] Open
|
41
|
|
42
|
A novel solution-gated graphene transistor biosensor for ultrasensitive detection of trinucleotide repeats. Analyst 2020; 145:4795-4805. [DOI: 10.1039/d0an00205d] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
A novel SGGT biosensor is constructed to achieve highly sensitive and selective sensing of GAA TNRs by integrating G-quadruplex enzymes.
Collapse
|
43
|
A Quantum Dot-Based FLIM Glucose Nanosensor. SENSORS 2019; 19:s19224992. [PMID: 31744089 PMCID: PMC6891378 DOI: 10.3390/s19224992] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/08/2019] [Revised: 11/03/2019] [Accepted: 11/13/2019] [Indexed: 01/04/2023]
Abstract
In the last few years, quantum dot (QD) nanoparticles have been employed for bioimaging and sensing due to their excellent optical features. Most studies have used photoluminescence (PL) intensity-based techniques, which have some drawbacks, especially when working with nanoparticles in intracellular media, such as fluctuations in the excitation power, fluorophore concentration dependence, or interference from cell autofluorescence. Some of those limitations can be overcome with the use of time-resolved spectroscopy and fluorescence lifetime imaging microscopy (FLIM) techniques. In this work, CdSe/ZnS QDs with long decay times were modified with aminophenylboronic acid (APBA) to achieve QD-APBA conjugates, which can act as glucose nanosensors. The attachment of the boronic acid moiety on the surface of the nanoparticle quenched the PL average lifetime of the QDs. When glucose bonded to the boronic acid, the PL was recovered and its lifetime was enhanced. The nanosensors were satisfactorily applied to the detection of glucose into MDA-MB-231 cells with FLIM. The long PL lifetimes of the QD nanoparticles made them easily discernible from cell autofluorescence, thereby improving selectivity in their sensing applications. Since the intracellular levels of glucose are related to the metabolic status of cancer cells, the proposed nanosensors could potentially be used in cancer diagnosis.
Collapse
|
44
|
Disease Detection with Molecular Biomarkers: From Chemistry of Body Fluids to Nature-Inspired Chemical Sensors. Chem Rev 2019; 119:11761-11817. [DOI: 10.1021/acs.chemrev.9b00437] [Citation(s) in RCA: 164] [Impact Index Per Article: 32.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
45
|
A review on nanomaterial-based field effect transistor technology for biomarker detection. Mikrochim Acta 2019; 186:739. [DOI: 10.1007/s00604-019-3850-6] [Citation(s) in RCA: 29] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2019] [Accepted: 09/17/2019] [Indexed: 12/27/2022]
|
46
|
|
47
|
A highly sensitive molecular structural probe applied to in situ biosensing of metabolites using PEDOT:PSS. Biotechnol Bioeng 2019; 117:291-299. [DOI: 10.1002/bit.27187] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2019] [Revised: 08/23/2019] [Accepted: 10/04/2019] [Indexed: 12/12/2022]
|
48
|
|
49
|
Highly sensitive solution-gated graphene transistors for label-free DNA detection. Biosens Bioelectron 2019; 136:91-96. [DOI: 10.1016/j.bios.2019.04.034] [Citation(s) in RCA: 29] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2019] [Revised: 04/15/2019] [Accepted: 04/17/2019] [Indexed: 11/28/2022]
|
50
|
Porous carbon supported nanoceria derived from one step in situ pyrolysis of Jerusalem artichoke stalk for functionalization of solution-gated graphene transistors for real-time detection of lactic acid from cancer cell metabolism. Biosens Bioelectron 2019; 140:111271. [PMID: 31154253 DOI: 10.1016/j.bios.2019.04.039] [Citation(s) in RCA: 22] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/22/2019] [Revised: 04/19/2019] [Accepted: 04/19/2019] [Indexed: 01/21/2023]
Abstract
Effective detection of biomarkers for tumor cells has been the focus of attention. In this work, we have successfully fabricated a highly sensitive sensor based on solution-gated graphene transistors (SGGT) for detecting lactic acid content accumulated in tumor cells through their glycolysis metabolism. The sensing mechanism of the lactic acid sensor is attributed to electrochemical catalysis of H2O2 produced by the oxidation of lactic acid by lactate oxidase near the gate electrode. The key component of the sensor is the functionalization of porous carbon loaded with ceria nanoparticles derived from a novel one step in situ pyrolysis of pretreated Jerusalem artichoke stalk, which significantly improved the sensor sensitivity, i.e. a detection limit as low as 300 nM and linear range from 3 μM to 300 μM. The optimized lactic acid sensor has successfully applied to the detection of lactic acid in practical cell culture samples with high credibility. The SGGT-based lactic acid biosensor shows great potential for the application in tumor microenvironment due to its superior biocompatibility and accuracy.
Collapse
|