Electrochemical detection of aqueous Ag+ based on Ag+-assisted ligation reaction

A renewable platform based on the entropy-driven catalytic amplification and element labeling inductively coupled plasma mass spectrometry for microRNA analysis

The element labeling inductively coupled plasma mass spectrometry (ICP-MS) strategy has been increasingly applied to the bioanalysis for various bio-targets. Herein, a renewable analysis platform with element labeling ICP-MS was firstly proposed for microRNA (miRNA) analysis. The analysis platform was established on the magnetic bead (MB) with entropy-driven catalytic (EDC) amplification. When the EDC reaction was initiated by target miRNA, numerous strands labeled with Ho element were released from MBs, and ¹⁶⁵Ho in the supernatant detected by ICP-MS could reflect the amount of target miRNA. After detection, the platform was easily regenerated by adding strands to reassemble EDC complex on MBs. This MB platform could be used four times, and the limit of detection for miRNA-155 was 8.4 pmol L^-1. Moreover, the developed regeneration strategy based on EDC reaction can be easily expanded to other renewable analysis platforms, such as, the renewable platform involving EDC and rolling circle amplification technology. Overall, this work proposed a novel regenerated bioanalysis strategy to reduce the consumption of reagent and time for probe preparation, profiting the development of bioassay based on element labeling ICP-MS strategy.

Dual-emissive ratiometric fluorescent nanosensor based on multi-nanomaterials for Ag+ determination in lake water

In this study, a sensitive ratiometric fluorescent nanosensor was constructed using a facile one-pot method by encapsulating carbon dots (CDs) and cadmium telluride quantum dots (CdTe QDs) into the pore cavities of a metal-organic framework (ZIF-8). In this nanosensor (CD/CdTe QD@ZIF-8), the fluorescence attributed to CdTe QDs was quenched by silver ions (Ag⁺), and the fluorescence intensity of CDs did not change. The introduction of ZIF-8 into the system can not only adsorb Ag⁺ but also easily separate CDs and CdTe QDs from the matrix. The developed CD/CdTe QD@ZIF-8 composite used as a ratiometric fluorescent probe exhibited high sensitivity and selectivity towards Ag⁺. The working linear range was 0.1-20 μM with a limit of detection (LOD) of 1.49 nM. Finally, the proposed nanosensor was applied to determine Ag⁺ in lake water with satisfactory results.

Rapid detection of silver ions based on luminescent carbon nanodots for multicolor patterning, smartphone sensors, and bioimaging applications

Photoluminescent nitrogen and sulfur co-doped carbon nanodots (N,S-CNDs) were prepared via single-step hydrothermal carbonization using 2,4-diaminobenzenesulfonic acid (2,4-DABSA) as the sole precursor. The synthesized N,S-CNDs are easily dispersed in aqueous solution and have an average particle size of 5.0 ± 0.2 nm, showing a high quantum yield of 23.1% with excellent stability. The surface states of the N,S-CNDs were confirmed by Fourier-transform infrared spectroscopy, powder X-ray diffractometry, Raman spectroscopy, and X-ray photoelectron spectroscopy techniques. These N,S-CNDs were applied for the rapid visual sensing detection of Ag⁺ ions, which can be identified by their photoluminescent color change under ultraviolet (UV) light illumination at 365 nm within 5 s. Furthermore, a linear correlation coefficient between P₀/P and Ag⁺ ions was observed in the linear range of 0-1.2 μM with a detection limit of 7.88 nM. The proposed method was successfully used for the sensitive detection of Ag⁺ ions in real samples with satisfactory recoveries and relative standard deviation. The photoluminescence properties of N,S-CND and N,S-CNDs/Ag⁺ aqueous solutions were demonstrated by their invisible inks that can only be seen when irradiated with UV light. The RGB values of N,S-CND and N,S-CNDs/Ag⁺ aqueous solutions were measured using a color selector smartphone application. In addition, N,S-CND and N,S-CNDs/Ag⁺ aqueous solutions were further used for the multicolor imaging of HCT-116 cancer cells due to the low toxicity of N,S-CNDs.

Rhodanine-based fluorometric sequential monitoring of silver (I) and iodide ions: Experiment, DFT calculation and multifarious applications

A simple rhodanine derived fluorophoric unit has been designed for selective detection of Ag⁺ and I^- ions in DMSO-H₂O medium. The sensor R1 showed an obvious "turn-on" fluorescence response toward Ag⁺ due to the inhibition of both C-N single bond free rotation, internal charge transfer (ICT) and the formation of chelation enhanced fluorescence (CHEF) effects. The fluorescence quantum yield (Φ) was increased from 0.0013 to 0.032 for receptor R1 upon the Ag⁺-complexation. In addition, the 1:1 complexing stoichiometry was employed based on Job's plot analysis with detection limit of 24.23 × 10^-7 M. Conversely, receptor R1+Ag⁺ particularly detects I^- ion over other co-existing anions by the "turn-off" fluorescence response due to the formation of AgI, displacing the receptor R1 with the quantum yield of 0.0014. The detection limit was calculated to be 22.83 × 10^-7 M. The sensing behaviour of receptor R1 toward Ag⁺ was also supported by density functional theory (DFT) calculations. Moreover, the sensing ability of reported receptor R1 could be exercised in multifarious applications like paper strip, silica-supported analysis, staining test for latent finger print, logical behaviour, smartphone-assisted quantitative detection and real water samples studies.

A low-cost paper-based aptasensor for simultaneous trace-level monitoring of mercury (II) and silver (I) ions

Mercury (Hg²⁺) and silver (Ag⁺) ions possess the harmful effects on public health and environment that makes it essential to develop the sensing techniques with great sensitivity for the ions. Metal ions commonly coexist in the different biological and environmental systems. Hence, it is an urgent demand to design a simple method for the simultaneous detection of metal ions, peculiarly in the case of coexisting Hg²⁺ and Ag⁺. This study introduces a low-cost paper-based aptasensor to monitor Hg²⁺ and Ag⁺, simultaneously. The strategy of the sensing array is according to the conformational changes of Hg²⁺- and Ag⁺-specific aptamers and their release from the GO surface after the injection of the target sample on the sensing platform. Through monitoring the fluorescence recovery changes against the concentrations of the ions, Hg²⁺ and Ag⁺ can be determined as low as 1.33 and 1.01 pM. The paper-based aptasensor can simultaneously detect the ions within about 10 min. The aptasensor is applied prosperously to monitor Hg²⁺ and Ag⁺ in human serum, water, and milk. The designed aptasensor with the main advantages of simplicity and feasibility holds the supreme potential to develop a cost-effective sensing method for environmental monitoring, food control, and human diagnostics.

An Exonuclease I-Assisted Silver-Metallized Electrochemical Aptasensor for Ochratoxin A Detection

Ochratoxin A (OTA)-a mycotoxin produced by Aspergillus and Penicillium fungi-is a carcinogen and common trace contaminant in agricultural and processed food products. As consumption is detrimental to human and animal health, regular product monitoring is vital, and highly sensitive and portable OTA sensors are necessary in many circumstances. Herein, we report an ultrasensitive, electroanalytical aptasensor for precise determination of OTA at trace levels. The sensor leverages a DNA aptamer to capture OTA and silver metallization as a signal enhancer. Exonuclease I is used to digest unbound aptamers, engendering excellent background signal suppression and sensitivity enhancements. Efficient optimization of assay conditions is achieved using central composite design (CCD), allowing rapid evaluation of both the electrode and square wave voltammetry parameter space. The sensor exhibits excellent analytical performance, with a concentration limit of detection of 0.7 pg mL^-1, a limit of quantitation of 2.48 pg mL^-1, and a linear dynamic range ( R² = 0.968) of over 6 orders of magnitude (between 1 pg mL^-1 and 0.1 μg mL^-1). Direct comparison with ultraperformance liquid chromatography (UPLC) indicates excellent analytical performance for standard solutions ( R² = 0.995) and spiked beer samples ( R² = 0.993), with almost quantitative recovery and less than 5% relative standard deviation (RSD).

Dual-emitting zein-protected gold nanoclusters for ratiometric fluorescence detection of Hg2+/Ag+ ions in both aqueous solution and self-assembled protein film

An abundant plant-sourced protein, zein, is used to prepare fluorescent Au nanoclusters as a promising alternative to animal/microorganism proteins.

Design and Investigation of Optical Properties of N-(Rhodamine-B)-Lactam-Ethylenediamine (RhB-EDA) Fluorescent Probe

This study presents chemical modification of a Rhodamine B (RhB) sensor probe by ethylenediamine (EDA), and investigation of its spectral as well as sensor properties to the various metals. The synthesised N-(Rhodamine-B)-lactam-ethylenediamine (RhB-EDA) fluorescent probe shows interesting optical sensor properties, and high sensitivity and selectivity to Ag⁺ ions among all the tested metal ions (K⁺, Mg2+, Cu2+, Ni2+, Fe2+, Pb2+, Na⁺, Mn2+, Li⁺, Al3+, Co2+, Hg2+, Sr2+, Ca2+, Ag⁺, Cd2+ and Zn2+), while the well-known Rhodamine B (RhB) fluorescent probe shows much less sensitivity to Ag⁺ ions, but high sensitivity to Fe2+ ions. The novel fluorescent sensor probe RhB-EDA has the capabilities to sense Ag⁺ ions up to µM ranges by using the fluorescence quenching approach. The probe displayed a dynamic response to Ag⁺ in the range of 0.43 × 10-3-10-6 M with a detection limit of 0.1 μM. The sensing system of an RhB-EDA novel fluorescent probe was optimised according to the spectral properties, effect of pH and buffer, photostability, incubation time, sensitivity, and selectivity. Since all the spectral and sensing properties were tested in green aqueous media, although many other similar sensor systems rely on organic solvent solutions, the RhB-EDA sensing probe may be a good candidate for measuring Ag⁺ ions in real-life applications.

Smart Sensing Based on DNA-Metal Interaction Enables a Label-Free and Resettable Security Model of Electrochemical Molecular Keypad Lock

Recently, molecular keypad locks have received increasing attention. As a new subgroup of smart biosensors, they show great potential for protecting information as a molecular security data processor, rather than merely molecular recognition and quantitation. Herein, label-free electrochemically transduced Ag⁺ and cysteine (Cys) sensors were developed. A molecular keypad lock model with reset function was successfully realized based on the balanced interaction of metal ion with its nucleic acid and chemical ligands. The correct input of "1-2-3" (i.e., "Ag⁺-Cys-cDNA") is the only password of such molecular keypad lock. Moreover, the resetting process of either correct or wrong input order could be easily made by Cys, buffer, and DI water treatment. Therefore, our system provides an even smarter system of molecular keypad lock, which could inhibit illegal access of unauthorized users, holding great promise in information protection at the molecular level.

DNA Modified Fe3O4@Au Magnetic Nanoparticles as Selective Probes for Simultaneous Detection of Heavy Metal Ions

Driven by the urgent need to detect trace heavy metal ions in various real water samples, this article demonstrates for the first time an electrochemical biosensor based on DNA modified Fe₃O₄@Au magnetic nanoparticles (NPs). Three DNA probes are designed to contain certain mismatched base pairs. One is thiolated and modified on the surface of Fe₃O₄@Au NPs (DNA 1). The other two probes (DNA 2 and 3) are labeled with two independent electrochemical species. Stable structures of cytosine-Ag⁺-cytosine and thymine-Hg²⁺-thymine formed in the presence of Ag⁺ and Hg²⁺ can assist the hybridization of DNA 1/DNA 2 and DNA 1/DNA 3, which locate corresponding electrochemical species onto the surface of the magnetic NPs. The achieved nanocomposites are then used as selective electrochemical probes for the detection of heavy metal ions by recording the square wave voltammetry signals. Simultaneous detection of Ag⁺ and Hg²⁺ is demonstrated without significant interference, and their individual high sensitivities are fundamentally preserved, which meet the requirements of U.S. Environmental Protection Agency (USEPA). Furthermore, the proposed method has been challenged by various real water samples. The results confirm the DNA modified magnetic NPs based sensing method may have potential applications for the monitoring of heavy metal ions in real sample analysis.

Prediction of wastewater quality using amperometric bioelectronic tongues

Wastewater samples from a Swedish chemi-thermo-mechanical pulp (CTMP) mill collected at different purification stages in a wastewater treatment plant (WWTP) were analyzed with an amperometric enzyme-based biosensor array in a flow-injection system. In order to resolve the complex composition of the wastewater, the array consists of several sensing elements which yield a multidimensional response. We used principal component analysis (PCA) to decompose the array's responses, and found that wastewater with different degrees of pollution can be differentiated. With the help of partial least squares regression (PLS-R), we could link the sensor responses to the Microtox® toxicity parameter, as well as to global organic pollution parameters (COD, BOD, and TOC). From investigating the influences of individual sensors in the array, it was found that the best models were in most cases obtained when all sensors in the array were included in the PLS-R model. We find that fast simultaneous determination of several global environmental parameters characterizing wastewaters is possible with this kind of biosensor array, in particular because of the link between the sensor responses and the biological effect onto the ecosystem into which the wastewater would be released. In conjunction with multivariate data analysis tools, there is strong potential to reduce the total time until a result is yielded from days to a few minutes.

Label-free colorimetric logic gates based on free gold nanoparticles and the coordination strategy between cytosine and silver ions

A colorimetric sensing strategy combined with logic gates was demonstrated by taking advantage of the dispersion and aggregation of gold nanoparticles.