3D vertical nanostructures for enhanced infrared plasmonics

Cactus-like Metamaterial Structures for Electromagnetically Induced Transparency at THz frequencies

THz metamaterials present unique opportunities for next-generation technologies and applications as they can fill the "THz gap" originating from the weak response of natural materials in this regime, providing a variety of novel or advanced electromagnetic wave control components and systems. Here, we propose a novel metamaterial design made of three-dimensional, metallic, "cactus-like" meta-atoms, showing electromagnetically induced transparency (EIT) and enhanced refractive index sensing performance at low THz frequencies. Following a detailed theoretical analysis, the structure is realized experimentally using multiphoton polymerization and electroless silver plating. The experimental characterization results obtained through THz time domain spectroscopy validate the corresponding numerical data, verifying the high potential of the proposed structure for slow light and sensing applications.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Self-Assembled 3D Nanosplit Rings for Plasmon-Enhanced Optofluidic Sensing

Plasmonic sensors are commonly defined on two-dimensional (2D) surfaces with an enhanced electromagnetic field only near the surface, which requires precise positioning of the targeted molecules within hotspots. To address this challenge, we realize segmented nanocylinders that incorporate plasmonic (1-50 nm) gaps within three-dimensional (3D) nanostructures (nanocylinders) using electron irradiation triggered self-assembly. The 3D structures allow desired plasmonic patterns on their inner cylindrical walls forming the nanofluidic channels. The nanocylinders bridge nanoplasmonics and nanofluidics by achieving electromagnetic field enhancement and fluid confinement simultaneously. This hybrid system enables rapid diffusion of targeted species to the larger spatial hotspots in the 3D plasmonic structures, leading to enhanced interactions that contribute to a higher sensitivity. This concept has been demonstrated by characterizing an optical response of the 3D plasmonic nanostructures using surface-enhanced Raman spectroscopy (SERS), which shows enhancement over a 22 times higher intensity for hemoglobin fingerprints with nanocylinders compared to 2D nanostructures.

Nanowire-based metamaterial for antireflective applications

In this paper, we introduce a hexagonal array of vertical gold nanowires with enhanced antireflective properties in the UV-Vis and near-IR wavelengths. The array reduces the reflectance of the underlying silicon wafer, based on the plasmonic resonances that metals exhibit at the nanoscale. The design is optimized with the particle swarm optimization algorithm, an evolutionary algorithm able to drive the morphology of a nano-object towards an optimum. The nanowires' optical properties are evaluated with numerical simulations. The reflectance of the optimized array decreases 100%, mainly in the visible wavelengths, unveiling its potential as an antireflective coating.

Two-state switchable plasmonic tweezers for dynamic manipulation of nano-objects

In this work, we present a plasmonic platform capable of trapping nano-objects in two different spatial configurations. The switch between the two trapping states, localized on the tip and on the outer wall of a vertical gold nanochannel, can be activated by varying the focusing position of the excitation laser along the main axis of the nanotube. We show that the switching of the trapping site is induced by changes in the distribution of the electromagnetic field and of the trapping force. The "inner" and "outer" trapping states are characterized by a static and a dynamic behavior respectively, and their stiffness is measured by analyzing the positions of the trapped specimens as a function of time. In addition, we demonstrate that the stiffness of the static state is high enough to trap particles with diameter as small as 40 nm. These results show a simple, controllable way to generate a switchable two-state trapping regime, which could be used as a model for the study of dynamic trapping or as a mechanism for the development of nanofluidic devices.

A semi-analytical approach for the characterization of ordered 3D nanostructures using grazing-incidence X-ray fluorescence

Following the recent demonstration of grazing-incidence X-ray fluorescence (GIXRF)-based characterization of the 3D atomic distribution of different elements and dimensional parameters of periodic nanoscale structures, this work presents a new computational scheme for the simulation of the angular-dependent fluorescence intensities from such periodic 2D and 3D nanoscale structures. The computational scheme is based on the dynamical diffraction theory in many-beam approximation, which allows a semi-analytical solution to the Sherman equation to be derived in a linear-algebraic form. The computational scheme has been used to analyze recently published GIXRF data measured on 2D Si₃N₄ lamellar gratings, as well as on periodically structured 3D Cr nanopillars. Both the dimensional and structural parameters of these nanostructures have been reconstructed by fitting numerical simulations to the experimental GIXRF data. Obtained results show good agreement with nominal parameters used in the manufacturing of the structures, as well as with reconstructed parameters based on the previously published finite-element-method simulations, in the case of the Si₃N₄ grating.

Cooperative Energy Transfer Controls the Spontaneous Emission Rate Beyond Field Enhancement Limits

Quantum emitters located in proximity to a metal nanostructure individually transfer their energy via near-field excitation of surface plasmons. The energy transfer process increases the spontaneous emission (SE) rate due to plasmon-enhanced local field. Here, we demonstrate a significant acceleration of the quantum emitter SE rate in a plasmonic nanocavity due to cooperative energy transfer (CET) from plasmon-correlated emitters. Using an integrated plasmonic nanocavity, we realize up to sixfold enhancement in the emission rate of emitters coupled to the same nanocavity on top of the plasmonic enhancement of the local density of states. The radiated power spectrum retains the plasmon resonance central frequency and line shape, with the peak amplitude proportional to the number of excited emitters indicating that the observed cooperative SE is distinct from superradiance. Plasmon-assisted CET offers unprecedented control over the SE rate and allows us to dynamically control the spontaneous emission rate at room temperature which can enable SE rate based optical modulators.

Tailoring grating strip widths for optimizing infrared absorption signals of an adsorbed molecular monolayer

Metal structures with resonances in the mid-infrared spectral range enable an increased sensitivity for detecting molecular vibrational signals. 1D gold strip gratings have already proven potential in surface-enhanced infrared absorption (SEIRA) experiments, as grating resonances and local electric field enhancement can be spectrally tuned by changing the grating period. Here, we identify the grating strip width as another important design parameter, which is investigated for further optimization of molecular absorption signal enhancement in SEIRA experiments. Previous literature used gratings to increase light absorption in relatively thick polymer layers. Here, we demonstrate the capability of gold strip gratings fabricated on a CaF₂ substrate to enhance the CH₂ vibrational modes of a thiol-based monolayer of MHDA. An optimal choice of the strip width w = 1.33 μm enables a maximum vibrational signal enhancement factor of around 84, when normalized to microscopic GIR measurements of an MHDA monolayer on an extended gold surface. Numerical simulations demonstrate the broadband local field enhancement of gold strip gratings, which are suitable for enhancing multiple vibrational modes in a large hot-spot volume.

Long-Range Capture and Delivery of Water-Dispersed Nano-objects by Microbubbles Generated on 3D Plasmonic Surfaces

The possibility of investigating small amounts of molecules, moieties, or nano-objects dispersed in solution constitutes a central step for various application areas in which high sensitivity is necessary. Here, we show that the rapid expansion of a water bubble can act as a fast-moving net for molecules or nano-objects, collecting the floating objects in the surrounding medium in a range up to 100 μm. Thanks to an engineered 3D patterning of the substrate, the collapse of the bubble could be guided toward a designed area of the surface with micrometric precision. Thus, a locally confined high density of particles is obtained, ready for evaluation by most optical/spectroscopic detection schemes. One of the main relevant strengths of the long-range capture and delivery method is the ability to increase, by a few orders of magnitude, the local density of particles with no changes in their physiological environment. The bubble is generated by an ultrafast IR laser pulse train focused on a resonant plasmonic antenna; due to the excitation process, the technique is trustworthy and applicable to biological samples. We have tested the reliabilities of the process by concentrating highly dispersed fluorescence molecules and fluorescent beads. Lastly, as an ultimate test, we have applied the bubble clustering method on nanosized exosome vesicles dispersed in water; due to the clustering effect, we were able to effectively perform Raman spectroscopy on specimens that were otherwise extremely difficult to measure.

Element sensitive reconstruction of nanostructured surfaces with finite elements and grazing incidence soft X-ray fluorescence

The geometry of a Si3N4 lamellar grating was investigated experimentally with reference-free grazing-incidence X-ray fluorescence analysis. While simple layered systems are usually treated with the matrix formalism to determine the X-ray standing-wave field, this approach fails for laterally structured surfaces. Maxwell solvers based on finite elements are often used to model electrical field strengths for any 2D or 3D structures in the optical spectral range. We show that this approach can also be applied in the field of X-rays. The electrical field distribution obtained with the Maxwell solver can subsequently be used to calculate the fluorescence intensities in full analogy to the X-ray standing-wave field obtained by the matrix formalism. Only the effective 1D integration for the layer system has to be replaced by a 2D integration of the finite elements, taking into account the local excitation conditions. We will show that this approach is capable of reconstructing the geometric line shape of a structured surface with high elemental sensitivity. This combination of GIXRF and finite-element simulations paves the way for a versatile characterization of nanoscale-structured surfaces.

Control of the interaction strength of photonic molecules by nanometer precise 3D fabrication

Applications for high resolution 3D profiles, so-called grayscale lithography, exist in diverse fields such as optics, nanofluidics and tribology. All of them require the fabrication of patterns with reliable absolute patterning depth independent of the substrate location and target materials. Here we present a complete patterning and pattern-transfer solution based on thermal scanning probe lithography (t-SPL) and dry etching. We demonstrate the fabrication of 3D profiles in silicon and silicon oxide with nanometer scale accuracy of absolute depth levels. An accuracy of less than 1nm standard deviation in t-SPL is achieved by providing an accurate physical model of the writing process to a model-based implementation of a closed-loop lithography process. For transfering the pattern to a target substrate we optimized the etch process and demonstrate linear amplification of grayscale patterns into silicon and silicon oxide with amplification ratios of ∼6 and ∼1, respectively. The performance of the entire process is demonstrated by manufacturing photonic molecules of desired interaction strength. Excellent agreement of fabricated and simulated structures has been achieved.

Controlling the Heat Dissipation in Temperature-Matched Plasmonic Nanostructures

Heat dissipation in a plasmonic nanostructure is generally assumed to be ruled only by its own optical response even though also the temperature should be considered for determining the actual energy-to-heat conversion. Indeed, temperature influences the optical response of the nanostructure by affecting its absorption efficiency. Here, we show both theoretically and experimentally how, by properly nanopatterning a metallic surface, it is possible to increase or decrease the light-to-heat conversion rate depending on the temperature of the system. In particular, by borrowing the concept of matching condition from the classical antenna theory, we first analytically demonstrate how the temperature sets a maximum value for the absorption efficiency and how this quantity can be tuned, thus leading to a temperature-controlled optical heat dissipation. In fact, we show how the nonlinear dependence of the absorption on the electron-phonon damping can be maximized at a specific temperature, depending on the system geometry. In this regard, experimental results supported by numerical calculations are presented, showing how geometrically different nanostructures can lead to opposite dependence of the heat dissipation on the temperature, hence suggesting the fascinating possibility of employing plasmonic nanostructures to tailor the light-to-heat conversion rate of the system.

Hot electrons in water: injection and ponderomotive acceleration by means of plasmonic nanoelectrodes

We present a theoretical and experimental study of a plasmonic nanoelectrode architecture that is able to inject bunches of hot electrons into an aqueous environment. In this approach, electrons are accelerated in water by ponderomotive forces up to energies capable of exciting or ionizing water molecules. This ability is enabled by the nanoelectrode structure (extruding out of a metal baseplate), which allows for the production of an intense plasmonic hot spot at the apex of the structure while maintaining the electrical connection to a virtually unlimited charge reservoir. The electron injection is experimentally monitored by recording the current transmitted through the water medium, whereas the electron acceleration is confirmed by observation of the bubble generation for a laser power exceeding a proper threshold. An understanding of the complex physics involved is obtained via a numerical approach that explicitly models the electromagnetic hot spot generation, electron-by-electron injection via multiphoton absorption, acceleration by ponderomotive forces and electron-water interaction through random elastic and inelastic scattering. The model predicts a critical electron density for bubble nucleation that nicely matches the experimental findings and reveals that the efficiency of energy transfer from the plasmonic hot spot to the free electron cloud is much more efficient (17 times higher) in water than in a vacuum. Because of their high kinetic energy and large reduction potential, these proposed wet hot electrons may provide new opportunities in photocatalysis, electrochemical processes and hot-electron driven chemistry.

Boosting infrared energy transfer in 3D nanoporous gold antennas

The applications of plasmonics to energy transfer from free-space radiation to molecules are currently limited to the visible region of the electromagnetic spectrum due to the intrinsic optical properties of bulk noble metals that support strong electromagnetic field confinement only close to their plasma frequency in the visible/ultraviolet range. In this work, we show that nanoporous gold can be exploited as a plasmonic material for the mid-infrared region to obtain strong electromagnetic field confinement, co-localized with target molecules into the nanopores and resonant with their vibrational frequency. The effective optical response of the nanoporous metal enables the penetration of optical fields deep into the nanopores, where molecules can be loaded thus achieving a more efficient light-matter coupling if compared to bulk gold. In order to realize plasmonic resonators made of nanoporous gold, we develop a nanofabrication method based on polymeric templates for metal deposition and we obtain antenna arrays resonating at mid-infrared wavelengths selected by design. We then coat the antennas with a thin (3 nm) silica layer acting as the target dielectric layer for optical energy transfer. We study the strength of the light-matter coupling at the vibrational absorption frequency of silica at 1240 cm^-1 through the analysis of the experimental Fano lineshape that is benchmarked against identical structures made of bulk gold. The boost in the optical energy transfer from free-space mid-infrared radiation to molecular vibrations in nanoporous 3D nanoantenna arrays can open new application routes for plasmon-enhanced physical-chemical reactions.

Beaming of Helical Light from Plasmonic Vortices via Adiabatically Tapered Nanotip

We demonstrate the generation of far-field propagating optical beams with a desired orbital angular momentum by using a smooth optical-mode transformation between a plasmonic vortex and free-space Laguerre-Gaussian modes. This is obtained by means of an adiabatically tapered gold tip surrounded by a spiral slit. The proposed physical model, backed up by the numerical study, brings about an optimized structure that is fabricated by using a highly reproducible secondary electron lithography technique. Optical measurements of the structure excellently agree with the theoretically predicted far-field distributions. This architecture provides a unique platform for a localized excitation of plasmonic vortices followed by its beaming.

High-purity 3D nano-objects grown by focused-electron-beam induced deposition

To increase the efficiency of current electronics, a specific challenge for the next generation of memory, sensing and logic devices is to find suitable strategies to move from two- to three-dimensional (3D) architectures. However, the creation of real 3D nano-objects is not trivial. Emerging non-conventional nanofabrication tools are required for this purpose. One attractive method is focused-electron-beam induced deposition (FEBID), a direct-write process of 3D nano-objects. Here, we grow 3D iron and cobalt nanopillars by FEBID using diiron nonacarbonyl Fe2(CO)9, and dicobalt octacarbonyl Co2(CO)8, respectively, as starting materials. In addition, we systematically study the composition of these nanopillars at the sub-nanometer scale by atom probe tomography, explicitly mapping the homogeneity of the radial and longitudinal composition distributions. We show a way of fabricating high-purity 3D vertical nanostructures of ∼50 nm in diameter and a few micrometers in length. Our results suggest that the purity of such 3D nanoelements (above 90 at% Fe and above 95 at% Co) is directly linked to their growth regime, in which the selected deposition conditions are crucial for the final quality of the nanostructure. Moreover, we demonstrate that FEBID and the proposed characterization technique not only allow for growth and chemical analysis of single-element structures, but also offers a new way to directly study 3D core-shell architectures. This straightforward concept could establish a promising route to the design of 3D elements for future nano-electronic devices.

3D coaxial out-of-plane metallic antennas for filtering and multi-spectral imaging in the infrared range

We fabricated and investigated a new configuration of 3D coaxial metallic antennas working in the infrared which combines the strong lateral light scattering of vertical plasmonic structures with the selective spectral transmission of 2D arrays of coaxial apertures. The coaxial structures are fabricated with a top-down method based on a template of hollow 3D antennas. Each antenna has a multilayer radial structure consisting of dielectric and metallic materials not achievable in a 2D configuration. A planar metallic layer is inserted normally to the antennas. The outer dielectric shell of the antenna defines a nanometric gap between the horizontal plane and the vertical walls. Thanks to this aperture, light can tunnel to the other side of the plane, and be transmitted to the far field in a set of resonances. These are investigated with finite-elements electromagnetic calculations and with Fourier-transform infrared spectroscopy measurements. The spectral position of the resonances can be tuned by changing the lattice period and/or the antenna length. Thanks to the strong scattering provided by the 3D geometry, the transmission peaks possess a high signal-to-noise ratio even when the illuminated area is less than 2 × 2 times the operation wavelength. This opens new possibilities for multispectral imaging in the IR with wavelength-scale spatial resolution.

Direct observation of narrow mid-infrared plasmon linewidths of single metal oxide nanocrystals

Infrared-responsive doped metal oxide nanocrystals are an emerging class of plasmonic materials whose localized surface plasmon resonances (LSPR) can be resonant with molecular vibrations. This presents a distinctive opportunity to manipulate light–matter interactions to redirect chemical or spectroscopic outcomes through the strong local electric fields they generate. Here we report a technique for measuring single nanocrystal absorption spectra of doped metal oxide nanocrystals, revealing significant spectral inhomogeneity in their mid-infrared LSPRs. Our analysis suggests dopant incorporation is heterogeneous beyond expectation based on a statistical distribution of dopants. The broad ensemble linewidths typically observed in these materials result primarily from sample heterogeneity and not from strong electronic damping associated with lossy plasmonic materials. In fact, single nanocrystal spectra reveal linewidths as narrow as 600 cm⁻¹ in aluminium-doped zinc oxide, a value less than half the ensemble linewidth and markedly less than homogeneous linewidths of gold nanospheres.

Establishing the cause of inhomogeneous broadening would help to produce narrow ensemble localized surface plasmon resonance peaks, favourable for sensing applications. Here, Johns et al. use near field optics for enhancing signal contrast, enabling the measurement of mid-infrared spectra of single nanocrystals.