Thermodynamic Insights and Conceptual Design of Skin-Sensitive Chitosan Coated Ceramide/PLGA Nanodrug for Regeneration of Stratum Corneum on Atopic Dermatitis

Smart Nanocarriers in Cosmeceuticals Through Advanced Delivery Systems

Nanomaterials have revolutionized various biological applications, including cosmeceuticals, enabling the development of smart nanocarriers for enhanced skin delivery. This review focuses on the role of nanotechnologies in skincare and treatments, providing a concise overview of smart nanocarriers, including thermo-, pH-, and multi-stimuli-sensitive systems, focusing on their design, fabrication, and applications in cosmeceuticals. These nanocarriers offer controlled release of active ingredients, addressing challenges like poor skin penetration and ingredient instability. This work discusses the unique properties and advantages of various nanocarrier types, highlighting their potential in addressing diverse skin concerns. Furthermore, we address the critical aspect of biocompatibility, examining potential health risks associated with nanomaterials. Finally, this review highlights current challenges, including the precise control of drug release, scalability, and the transition from in vitro to in vivo applications. We also discuss future perspectives such as the integration of digital technologies and artificial intelligence for personalized skincare to further advance the technology of smart nanocarriers in cosmeceuticals.

Topical delivery of siRNA to psoriatic skin model using high molecular weight chitosan derivatives: In vitro and in vivo studies

Psoriasis is a chronic inflammatory skin disease that, like other immune-mediated conditions, may benefit from small interfering RNA (siRNA)-based therapies, which are emerging as a promising alternative by addressing several limitations of current treatments. In this study, topical formulations of chitosan-based vectors were developed to deliver siRNA targeting tumor necrosis factor alpha (TNFα) to inflamed skin. Grafting diisopropylethylamine (DIPEA) and polyethylene glycol (PEG) onto the chitosan backbone enhanced siRNA delivery efficiency under physiological conditions, forming robust polymeric vectors with high structural and colloidal stability. These vectors provided siRNA protection against RNAse degradation and oxidative damage. Additionally, the chitosan derivatives displayed lysozyme-mediated biodegradability comparable to native chitosan, while PEG was released in response to reductive environments, supporting controlled vector disassembly. The PEGylated DIPEA-chitosan/siRNA polyplexes demonstrated positive zeta potentials (up to + 11 mV), particle sizes of 100-200 nm, and very low cytotoxicity in keratinocyte and fibroblast cell lines. In vitro, the polyplexes achieved TNFα knockdown levels (65%) in RAW macrophages, comparable to those obtained with Lipofectamine™. Topical formulations showed enhanced interaction of vectors with skin models (Strat-M® and porcine ear skin) compared to naked siRNA. Furthermore, in vivo studies indicated that hair follicles were a key route for polyplexes to penetrate deeper skin layers. A rodent model of psoriasis induced by imiquimod was treated topically with these vectors, resulting in approximately a 50% reduction in TNFα levels at inflammation sites, decreased immune cell infiltration, and preservation of epidermal structure. These findings collectively underscore the potential of DIPEA-chitosan-based vectors for topical siRNA-based therapies.

Atopic dermatitis treatment: A comprehensive review of conventional and novel bioengineered approaches

Atopic dermatitis (AD) remains a challenging condition, with conventional treatments often leading to adverse effects and limited efficacy. This review explores the diverse landscape of AD treatments, encompassing conventional methods, novel topical and systemic therapies, and emerging bioengineered strategies. While conventional drug administration often requires high dosages or frequent administration, leading to adverse effects, targeted biologics have shown promise. Phototherapy and wet wrap therapy, while helpful, have limitations. Given these factors, the need for modern and effective therapeutic strategies for AD is pressing. Complementary or alternative therapies have garnered significant attention in recent years as a compelling treatment for AD. Among these, functionalized biomaterials and textiles with physicochemical, nanotechnology-based characteristics, or bioengineered features are some of the most common typical adjuvant therapies. The multifunctional-engineered biomaterials, as a new generation of biomedical materials, and stem cells, seem to hold tremendous promise for the treatment of dermatological diseases like AD. Biomaterials have seen great success, especially in various medical fields, due to their unique and adaptable characteristics. These materials, including collagen, PCL, and PLGA, offer unique advantages, such as biocompatibility, biodegradability, controlled drug release, and enhanced drug retention.

Chitosan-coated nanoparticles in innovative cancer bio-medicine

In the recent decade, nanoparticles (NPs) have had enormous implications in cancer biomedicine, including research, diagnosis, and therapy. However, their broad application still faces obstacles due to some practical limitations and requires further development. Recently, there has been more interest in the coated class of nanoparticles to address those challenges. Chitosan-coated NPs are simple to produce, biodegradable, biocompatible, exhibit antibacterial activity, and have less cytotoxicity. This study provides an updated and comprehensive overview of the application of chitosan-coated NPs as a promising class of NPs in cancer biomedicine. Additionally, we discussed chitosan-coated lipid, metal, and polymer-based nanoparticles in biomedical applications. Furthermore, different coating methods and production/characterization procedures were reviewed. Moreover, the biological and physicochemical advantages of chitosan-coated NPs, including facilitated controlled release, greater physicochemical stability, improved cell/tissue interaction, and enhanced bioavailability of medications, were highlighted. Finally, the prospects of chitosan-coated NPs in cancer biomedicine were discussed.

Chitosan and its amphiphilic derivative nanoparticles loaded with Minoxidil for induction of hair growth: In vitro and in vivo evaluation

Minoxidil is widely used for treating Androgenic Alopecia, but its low hydrophilicity promotes the use of co-solvents in commercial formulations, which could then cause skin irritations. Nano-drug delivery systems have been developed to improve the solubility of lipophilic molecules and increase the concentration of drugs in hair follicles, thereby minimizing side effects. Chitosan (CS) and Methylated Aminobenzyl Carboxymethyl Chitosan (MCS) nanoparticles containing Minoxidil were prepared and evaluated for their physicochemical properties, drug release profile, skin permeation, cytotoxicity, and animal hair growth. The results showed that MCS nanoparticles had a 60 % drug release compared to CS nanoparticles, with almost complete release in 2 h. MCS nanoparticles also showed a 20 % drug permeation from skin compared to 70 % for CS nanoparticles in 24 h. In 48 and 72 h, CS and MCS nanoparticles didn't exhibit any significant cytotoxicity. Animal study revealed a significant increase in hair growth from MCS nanoparticles compared to the commercial formulation in fourteen days. However, MCS nanoparticles were less efficient compared to CS nanoparticles. The use of MCS in nano-drug delivery systems is expected to continue to gain importance due to its ability to enhance the solubility of hydrophobic drugs, particularly in the treatment of skin diseases.

A drug co-delivery platform made of magnesium-based micromotors enhances combination therapy for hepatoma carcinoma cells

Combination therapy is an emerging strategy to overcome multidrug resistance (MDR) in hepatocellular carcinoma (HCC) chemotherapy treatment. However, the passive diffusion in traditional delivery systems greatly retards the approach and penetration of drugs into hepatocellular carcinoma cells and thus hinders the efficacy of combination therapy. Micro/nanomotors with autonomous locomotion in a tiny scale provide the possibility of tackling this issue. Herein, an active drug delivery micromotor platform delicately designed to load drugs with different physicochemical properties and enhance the drug permeability of cells is demonstrated for HCC chemotherapy treatment. The biocompatible micromotor platform Mg/PLGA/CHI comprised magnesium (Mg) coated with two polymer layers made of poly(lactic-co-glycolic acid) (PLGA) and chitosan (CHI), where the hydrophobic and hydrophilic drugs doxorubicin (Dox) and Curcumin (Cur) were loaded, respectively. The autonomous motion of the micromotors with velocity up to 45 μm s-1 greatly enhanced the diffusion of chemotherapeutic drugs and led to higher extracellular and intracellular drug distribution. Moreover, hydrogen produced during the motion eliminated the excess reactive oxygen species (ROS) in the human hepatocellular carcinoma (HepG2) cells. Compared with inert groups, the absorption of Dox and Cur from the active micromotors was about 2.9 and 1.5 times higher in human hepatocellular carcinoma (HepG2) cells. In addition, the anti-tumor activity also obviously improved at the micromotor concentration of 1 mg mL-1 (cell proliferation was reduced by almost 30%). Overall, this work proposes an approach based on loading different chemotherapy agents on an active delivery system to enhance drug permeability and overcome MDR and provides a potentially effective therapeutic strategy for the treatment of HCC.

From gut to skin: exploring the potential of natural products targeting microorganisms for atopic dermatitis treatment

Atopic dermatitis (AD) is the most common chronic inflammatory skin disease. Recent studies have revealed that interactions between pathogenic microorganisms, which have a tendency to parasitize the skin of AD patients, play a significant role in the progression of the disease. Furthermore, specific species of commensal bacteria in the human intestinal tract can have a profound impact on the immune system by promoting inflammation and pruritogenesis in AD, while also regulating adaptive immunity. Natural products (NPs) have emerged as promising agents for the treatment of various diseases. Consequently, there is growing interest in utilizing natural products as a novel therapeutic approach for managing AD, with a focus on modulating both skin and gut microbiota. In this review, we discuss the mechanisms and interplay between the skin and gut microbiota in relation to AD. Additionally, we provide a comprehensive overview of recent clinical and fundamental research on NPs targeting the skin and gut microbiota for AD treatment. We anticipate that our work will contribute to the future development of NPs and facilitate research on microbial mechanisms, based on the efficacy of NPs in treating AD.

Use of Poly Lactic-co-glycolic Acid Nano and Micro Particles in the Delivery of Drugs Modulating Different Phases of Inflammation

Chronic inflammation contributes to the pathogenesis of many diseases, including apparently unrelated conditions such as metabolic disorders, cardiovascular diseases, neurodegenerative diseases, osteoporosis, and tumors, but the use of conventional anti-inflammatory drugs to treat these diseases is generally not very effective given their adverse effects. In addition, some alternative anti-inflammatory medications, such as many natural compounds, have scarce solubility and stability, which are associated with low bioavailability. Therefore, encapsulation within nanoparticles (NPs) may represent an effective strategy to enhance the pharmacological properties of these bioactive molecules, and poly lactic-co-glycolic acid (PLGA) NPs have been widely used because of their high biocompatibility and biodegradability and possibility to finely tune erosion time, hydrophilic/hydrophobic nature, and mechanical properties by acting on the polymer's composition and preparation technique. Many studies have been focused on the use of PLGA-NPs to deliver immunosuppressive treatments for autoimmune and allergic diseases or to elicit protective immune responses, such as in vaccination and cancer immunotherapy. By contrast, this review is focused on the use of PLGA NPs in preclinical in vivo models of other diseases in which a key role is played by chronic inflammation or unbalance between the protective and reparative phases of inflammation, with a particular focus on intestinal bowel disease; cardiovascular, neurodegenerative, osteoarticular, and ocular diseases; and wound healing.

Chitosan-based drug delivery systems for skin atopic dermatitis: recent advancements and patent trends

Atopic dermatitis (AD) is a complex, relapsing inflammatory skin disease with a considerable social and economic burden globally. AD is primarily characterized by its chronic pattern and it can have important modifications in the quality of life of the patients and caretakers. One of the fastest-growing topics in translational medicine today is the exploration of new or repurposed functional biomaterials into drug delivery therapeutic applications. This area has gained a considerable amount of research which produced many innovative drug delivery systems for inflammatory skin diseases like AD. Chitosan, a polysaccharide, has attracted attention as a functional biopolymer for diverse applications, especially in pharmaceutics and medicine, and has been considered a promising candidate for AD treatment due to its antimicrobial, antioxidative, and inflammatory response modulation properties. The current pharmacological treatment for AD involves prescribing topical corticosteroid and calcineurin inhibitors. However, the adverse reactions associated with the long-term usage of these drugs such as itching, burning, or stinging sensation are also well documented. Innovative formulation strategies, including the use of micro- and nanoparticulate systems, biopolymer hydrogel composites, nanofibers, and textile fabrication are being extensively researched with an aim to produce a safe and effective delivery system for AD treatment with minimal side effects. This review outlines the recent development of various chitosan-based drug delivery systems for the treatment of AD published in the past 10 years (2012-2022). These chitosan-based delivery systems include hydrogels, films, micro-, and nanoparticulate systems as well as chitosan textile. The global patent trends on chitosan-based formulations for the AD are also discussed.

Recent Trends in Nanocarriers for the Management of Atopic Dermatitis

BACKGROUND

Atopic dermatitis (AD) is a pruritic inflammatory skin condition with increasing global prevalence, almost affecting 15% to 30% of children and 5% of adults. AD results due to a complex interaction between the impaired skin barrier function, allergens, and immunological cells. Topical corticosteroids or calcineurin inhibitors in the form of creams or ointments are the mainstay of therapy, but they have low skin penetration and skin barrier repair efficiency.

OBJECTIVE

The above limitations of conventional dosage forms have motivated the development of nanoformulations of drugs for improved penetration and deposition in the skin for better management of AD.

METHODS

Databases, such as Pubmed, Elsevier, and Google Scholar, were reviewed for the investigations or reviews published related to the title.

RESULTS

The present review discusses the advantages of nanoformulations for the management of AD. Further, it also discusses the various types of topically investigated nanoformulations, i.e., polymeric nanoparticles, inorganic nanoparticles, solid lipid nanoparticles, liposomes, ethosomes, transfersomes, cubosomes, and nanoemulsion for the management of atopic dermatitis. In addition, it also discusses advancements in nanoformulations, such as nanofibres, nanosponges, micelles, and nanoformulations embedded textiles development for the management of AD.

CONCLUSION

The nanoformulations of drugs can be a better alternative for the topical management of AD with enhanced skin penetration and deposition of drugs with reduced systemic side effects and better patient compliance.

Using Chitosan-Coated Polymeric Nanoparticles-Thermosensitive Hydrogels in association with Limonene as Skin Drug Delivery Strategy

Topical delivery of local anesthetics (LAs) is commonly used to decrease painful sensations, block pain throughout procedures, and alleviate pain after surgery. Dermal and/or transdermal delivery of LAs has other advantages, such as sustained drug delivery and decreased systemic adverse effects. This study reports the development of poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles coated with chitosan for the sustained release and topicality of benzocaine (BZC) and topical delivery. BZC PLGA nanoparticles or nonencapsulated drugs were further incorporated into Poloxamer hydrogels (Pluronic™ F-127). The nanoparticles showed a mean diameter of 380 ± 4 nm, positive zeta potential after coating with chitosan (23.3 ± 1.7 mV), and high encapsulation efficiency (96.7 ± 0.02%). Cellular viability greater than 70% for both fibroblasts and keratinocytes was observed after treatment with nanoparticles, which is in accordance with the preconized guidelines for biomedical devices and delivery systems. Both the nanoparticles and hydrogels were able to modulate BZC delivery and increase drug permeation when compared to the nonencapsulated drug. Furthermore, the incorporation of limonene into hydrogels containing BZC-loaded nanoparticles increased the BZC permeation rates. Non-Newtonian and pseudoplastic behaviors were observed for all hydrogel nanoformulations with or without nanoparticles. These results demonstrate that the hydrogel-nanoparticle hybrids could be a promising delivery system for prolonged local anesthetic therapy.

Nanodelivery Strategies for Skin Diseases with Barrier Impairment: Focusing on Ceramides and Glucocorticoids

The human epidermis has a characteristic lipidic composition in the stratum corneum, where ceramides play a crucial role in the skin barrier homeostasis and in water-holding capacity. Several skin diseases, such as atopic dermatitis and psoriasis, exhibit a dysfunction in the lipid barrier with altered ceramide levels and increased loss of transepidermal water. Glucocorticoids are normally employed in the therapeutical management of these pathologies. However, they have shown a poor safety profile and reduced treatment efficiency. The main objective of this review is to, within the framework of the limitations of the currently available therapeutical approaches, establish the relevance of nanocarriers as a safe and efficient delivery strategy for glucocorticoids and ceramides in the topical treatment of skin disorders with barrier impairment.

Cerosomes as skin repairing agent: Mode of action studies with a model stratum corneum layer at liquid/air and liquid/solid interfaces

The stratum corneum (SC) is the largest physical barrier of the human body. It protects against physical, chemical and biological damages, and avoids evaporation of water from the deepest skin layers. For its correct functioning, the homeostasis of the SC lipid matrix is fundamental. An alteration of the lipid matrix composition and in particular of its ceramide (CER) fraction can lead to the development of pathologies such as atopic dermatitis and psoriasis. Different studies showed that the direct replenishment of SC lipids on damaged skin had positive effects on the recovery of its barrier properties. In this work, cerosomes, i.e. liposomes composed of SC lipids, have been successfully prepared in order to investigate the mechanism of interaction with a model SC lipid matrix. The cerosomes contain CER[NP], D-CER[AP], stearic acid and cholesterol. In addition, hydrogenated soybean phospholipids have been added to one of the formulations leading to an increased stability at neutral pH. For the mode of action studies, monolayer models at the air-water interface and on solid support have been deployed. The results indicated that a strong interaction occurred between SC monolayers and the cerosomes. Since both systems were negatively charged, the driving force for the interaction must be based on the ability of CERs head groups to establish intermolecular hydrogen bonding networks that energetically prevailed against the electrostatic repulsion. This work proved for the first time the mode of action by which cerosomes exploit their function as skin barrier repairing agents on the SC.

Bacteria-Responsive Biopolymer-Coated Nanoparticles for Biofilm Penetration and Eradication

Biofilm infections are common and can be extremely difficult to treat. Bacteria-responsive nanoparticles that respond to multiple bacterial stimuli have the potential to successfully prevent and eradicate biofilms. Here, we...

Performance of Oleic Acid and Soybean Oil in the Preparation of Oil-in-Water Microemulsions for Encapsulating a Highly Hydrophobic Molecule

This work analyzes the dispersion of a highly hydrophobic molecule, (9Z)-N-(1,3-dihydroxyoctadecan-2-yl)octadec-9-enamide (ceramide-like molecule), with cosmetic and pharmaceutical interest, by exploiting oil-in-water microemulsions. Two different oils, oleic acid and soybean oil, were tested as an oil phase while mixtures of laureth-5-carboxylic acid (Akypo) and 2-propanol were used for the stabilization of the dispersions. This allowed us to obtain stable aqueous-based formulations with a relatively reduced content of oily phase (around 3% w/w), that may enhance the bioavailability of this molecule by its solubilization in nanometric oil droplets (with a size range of 30–80 nm), that allow the incorporation of a ceramide-like molecule of up to 3% w/w, to remain stable for more than a year. The nanometric size of the droplet containing the active ingredient and the stability of the formulations provide the basis for evaluating the efficiency of microemulsions in preparing formulations to enhance the distribution and availability of ceramide-like molecules, helping to reach targets in cosmetic and pharmaceutical formulations.

The emerging role of nanotechnology in skincare

The role of cosmetic products is rapidly evolving in our society, with their use increasingly seen as an essential contribution to personal wellness. This suggests the necessity of a detailed elucidation of the use of nanoparticles (NPs) in cosmetics. The aim of the present work is to offer a critical and comprehensive review discussing the impact of exploiting nanomaterials in advanced cosmetic formulations, emphasizing the beneficial effects of their extensive use in next-generation products despite a persisting prejudice around the application of nanotechnology in cosmetics. The discussion here includes an interpretation of the data underlying generic information reported on the product labels of formulations already available in the marketplace, information that often lacks details identifying specific components of the product, especially when nanomaterials are employed. The emphasis of this review is mainly focused on skincare because it is believed to be the cosmetics market sector in which the impact of nanotechnology is being seen most significantly. To date, nanotechnology has been demonstrated to improve the performance of cosmetics in a number of different ways: 1) increasing both the entrapment efficiency and dermal penetration of the active ingredient, 2) controlling drug release, 3) enhancing physical stability, 4) improving moisturizing power, and 5) providing better UV protection. Specific attention is paid to the effect of nanoparticles contained in semisolid formulations on skin penetration issues. In light of the emerging concerns about nanoparticle toxicity, an entire section has been devoted to listing detailed examples of nanocosmetic products for which safety has been investigated.

Polyelectrolyte multilayer composite coating on 316 L stainless steel for controlled release of dual growth factors accelerating restoration of bone defects

A composite coating of polyelectrolyte multilayers (PEMs) consisting of collagen, a chitosan barrier, and poly-γ-glutamic acid was fabricated using a spin coating technique to investigate and overcome the limited osseointegration capacity of 316 L stainless steel (316 L SS). To further enhance the biocompatibility, bone morphogenetic protein 2 (BMP-2) and basic fibroblast growth factor-2 (FGF-2) were loaded separately as dual growth factors, allowing for progressive drug release following the natural process of bone regeneration. The first burst release of FGF-2 triggered the proliferation of surrounding cells, and the subsequent release of BMP-2 stimulated their differentiation. The microstructure, surface potential, hardness, reduced Young's modulus, and wettability were assessed using scanning electron microscopy, nanoindentation, and water contact angle. The formation of apatite layers after immersion in simulated body fluid confirmed the bioactivity of this PEM. PEMs loaded with BMP-2 and FGF-2 showed a long sustained release of growth factors for up to 48 days. The biological properties were studied in vitro with rat bone mesenchymal stem cells (rBMSCs) and in vivo using a rat critical-sized calvarial defect model. PEMs loaded with growth factors further stimulated the proliferation and osteogenic differentiation of rBMSCs and the histology results indicated that new bone tissues could directly grow onto the PEMs. These findings suggest that PEM composite coating possesses significant potential for surface modification and long-term drug release of metallic implants to assist with bone restoration.

Polymer-Based Smart Drug Delivery Systems for Skin Application and Demonstration of Stimuli-Responsiveness

Progress in recent years in the field of stimuli-responsive polymers, whose properties change depending on the intensity of a signal, permitted an increase in smart drug delivery systems (SDDS). SDDS have attracted the attention of the scientific community because they can help meet two current challenges of the pharmaceutical industry: targeted drug delivery and personalized medicine. Controlled release of the active ingredient can be achieved through various stimuli, among which are temperature, pH, redox potential or even enzymes. SDDS, hitherto explored mainly in oncology, are now developed in the fields of dermatology and cosmetics. They are mostly hydrogels or nanosystems, and the most-used stimuli are pH and temperature. This review offers an overview of polymer-based SDDS developed to trigger the release of active ingredients intended to treat skin conditions or pathologies. The methods used to attest to stimuli-responsiveness in vitro, ex vivo and in vivo are discussed.

An overview of gastrointestinal mucus rheology under different pH conditions and introduction to pH-dependent rheological interactions with PLGA and chitosan nanoparticles

This review discusses the physicochemical and mechanical properties of porcine gastrointestinal mucus from a rheological point of view. Considering mucus as a viscoelastic gel that functions as a biological barrier by limiting particles passage, lubricating the gastrointestinal tract, and protecting the stomach from gastric acids. The viscoelastic and protective properties of mucus are mainly produced by its mucin network, which is stabilized through electrostatic, hydrophobic and hydrogen bonding interactions. Otherwise, mucus rheology is determined by its polyanionic nature at physiological pH. At neutral pH, mucus presents a viscous behavior produced by chains crosslinking. While, at acidic pH, mucus exhibits an elastic behavior related with the extended conformation that produces mucus gelation at the stomach. Additionally, rheology studies the degree of adhesion between a polymer-mucus mixture through rheological synergism, and how it varies at different pH conditions. Finally, mucoadhesion phenomenon is exemplified with chitosan (cationic) and poly (lactic-co-glycolic) acid (anionic) polymers.

Spheroid formation of human keratinocyte: Balancing between cell-substrate and cell-cell interaction

BACKGROUND

The formation of spheroids is tightly regulated by intrinsic cell-cell and cell-substrate interactions.

OBJECTIVE

The chitosan (CS)-coating was applied to investigate the driven force directed the spheroid formation.

METHODS

The effects of CS on cell functions were studied. Atomic force microscopy was employed to measure the cell- biomaterial interplay at single cell level.

RESULTS

HaCaT cells shifted from their flattened sheet to a compact 3D spheroidal morphology when increasing CS-coating concentration. The proliferative capacity of HaCaT was preserved in the spheroid. The expression and activation of integrin β1 (ITGB1) were enhanced on CS modified surfaces, while the active to total ratio of ITGB1 was decreased. The adhesive force of a single HaCaT cell to the tissue culture plate (TCP) was 4.84±0.72 nN. It decreased on CS-coated surfaces as CS concentration increased, from 2.16±0.26 nN to 0.96±0.17 nN. The adhesive force between the single HaCaT cell to its neighbor cell increased as CS concentration increased, from 1.15±0.09 nN to 2.60±0.51 nN.

CONCLUSIONS

Conclusively, the decreased cell- substrate adhesion was the main driven force in the spheroid formation. This finding might serve as a design criterion for biomaterials facilitating the formation of epithelial spheroids.

Recent Advances on Topical Application of Ceramides to Restore Barrier Function of Skin

Human skin is the largest organ of the body and is an effective physical barrier keeping it from environmental conditions. This barrier function of the skin is based on stratum corneum, located in the uppermost skin. Stratum corneum has corneocytes surrounded by multilamellar lipid membranes which are composed of cholesterol, free fatty acids and ceramides (CERs). Alterations in ceramide content of the stratum corneum are associated with numerous skin disorders. In recent years, CERs have been incorporated into conventional and novel carrier systems with the purpose of exogenously applying CERs to help the barrier function of the skin. This review provides an overview of the structure, function and importance of CERs to restore the barrier function of the skin following their topical application.

Nanosuspension-Based Dissolving Microneedle Arrays for Intradermal Delivery of Curcumin

The objective of this study was to evaluate the intradermal delivery of curcumin utilising poly(vinylalcohol) (PVA)-based microneedles loaded with curcumin nanosuspension (CU-NS). Nanoprecipitation was used to formulate the CU-NS which was then incorporated into PVA microneedles arrays consisting of 11 × 11 microneedles of conical shape, measuring 900 µm in height and with 300 µm base diameter. The nanosuspension particle size was 520 ± 40 nm, with a polydispersity of 0.27 ± 0.02 using sodium lauryl sulfate (SLS) as a stabiliser. In vitro dissolution studies in 10% w/v Tween 80 showed that the CU-NS dissolved significantly faster than unmodified curcumin powder, with 34% released from the CU-NS, compared to 16% from the curcumin powder after 48 h. The CU-NS-loaded microneedles (CU-MN) were able to withstand a compression force of 32 N for 30 s. Moreover, these microneedles were able to penetrate excised neonatal porcine skin to a depth of 500 µm, dissolved completely in the skin within 60 min. After CU-MN dissolution, the drug diffused from the application site and migrated through the skin layers down to 2300 µm, significantly more than observed with topical application of CU-NS. This suggest that the fabricated microneedles with the incorporated CU-NS could enhance the intradermal delivery of curcumin.

Multifunctional chitosan-coated poly(lactic-co-glycolic acid) nanoparticles for spatiotemporally controlled codelivery of ceramide and C-phycocyanin to treat atopic dermatitis

Atopic dermatitis is an inflammatory disease associated with defective skin barrier. The co-administration of a lipid-enhancing skin barrier composed of ceramide with an anti-inflammatory agent is required to effectively treat atopic dermatitis. As atopic dermatitis treatment is affected by the dosage and frequency of medication, the development of nanoparticles that have long-term efficacy with a single dose would be advantageous. In this study, skin-sensitive chitosan nanoparticles codelivering ceramide and C-phycocyanin were developed to provide anti-inflammatory effects with no cytotoxicity, and their effect on stratum corneum formation in a rat atopic dermatitis model was examined. Analysis of the messenger RNA expression of keratinization factors demonstrated that the stratum corneum–formation effect of poly(lactic-co-glycolic acid) nanoparticles containing ceramide was similar to or higher than that of ceramide alone. Compared to the nanoparticles without C-phycocyanin, nanoparticles coated with C-phycocyanin and chitosan attenuated histamine release. In addition, despite frequent washing, the nanoparticles were well fixed to the epidermis after their administration. The results suggest that a single treatment with the combination of lipid therapy/anti-inflammatory nanoparticles is a convenient and high-efficiency means to increase stratum corneum formation in atopic dermatitis patients.

Nanoparticle-Enabled Transdermal Drug Delivery Systems for Enhanced Dose Control and Tissue Targeting

Transdermal drug delivery systems have been around for decades, and current technologies (e.g., patches, ointments, and creams) enhance the skin permeation of low molecular weight, lipophilic drugs that are efficacious at low doses. The objective of current transdermal drug delivery research is to discover ways to enhance skin penetration of larger, hydrophilic drugs and macromolecules for disease treatment and vaccination. Nanocarriers made of lipids, metals, or polymers have been successfully used to increase penetration of drugs or vaccines, control drug release, and target drugs to specific areas of skin in vivo. While more research is needed to identify the safety of nanocarriers, this technology has the potential to expand the use of transdermal routes of administration to a wide array of therapeutics. Here, we review the current state of nanoparticle skin delivery systems with special emphasis on targeting skin diseases.

Co-stimulation of HaCaT keratinization with mechanical stress and air-exposure using a novel 3D culture device

Artificial skin or skin equivalents have been used for clinical purpose to skin graft and as substitutes for animal experiments. The culture of cell lines such as HaCaT has the potential to produce large amounts of artificial skin at a low cost. However, there is a limit to keratinization due to the restriction of differentiation in HaCaT. In this study, a culture device that mimics the in vivo keratinization mechanism, co-stimulated by air-exposure and mechanical stimulation, was developed to construct skin equivalents. The device can reconstruct the epidermal morphology, including the cornified layer, similar to its formation in vivo. Under the condition, epidermis was differentiated in the spinous and granular layers. Formation of the stratum corneum is consistent with the mRNA and protein expressions of differentiation markers. The device is the first of its kind to combine air-exposure with mechanical stress to co-stimulate keratinization, which can facilitate the economically viable production of HaCaT-based artificial skin substitutes.

Surface Morphology of Vapor-Deposited Chitosan: Evidence of Solid-State Dewetting during the Formation of Biopolymer Films

Chitosan is a useful and versatile biopolymer with several industrial and biological applications. Whereas its physical and physicochemical bulk properties have been explored quite intensively in the past, there is a lack of studies regarding the morphology and growth mechanisms of thin films of this biopolymer. Of particular interest for applications in bionanotechnology are ultrathin films with thicknesses under 500 Å. Here, we present a study of thin chitosan films prepared in a dry process using physical vapor deposition and in situ ellipsometric monitoring. The prepared films were analyzed with atomic force microscopy in order to correlate surface morphology with evaporation parameters. We find that the surface morphology of our final thin films depends on both the optical thickness, i.e., measured with ellipsometry, and the deposition rate. Our work shows that ultrathin biopolymer films can undergo dewetting during film formation, even in the absence of solvents and thermal annealing.