An Acinetobacter trimeric autotransporter adhesin reaped from cells exhibits its nonspecific stickiness via a highly stable 3D structure

Virulence-linked adhesin drives mutualist colonization of the bee gut via biofilm formation

Bacterial biofilms are stable multicellular structures that can enable long term host association. Yet, the role of biofilms in supporting gut mutualism is still not fully understood. Here, we investigate Snodgrassella alvi, a beneficial bacterial symbiont of honey bees, and find that biofilm formation is required for its colonization of the bee gut. We constructed fifteen S. alvi mutants containing knockouts of genes known to promote colonization with putative roles in biofilm formation. Genes required for colonization included staA and staB, encoding trimeric autotransporter adhesins (TAAs) and mltA, encoding a lytic transglycosylase. Intriguingly, TAAs are considered virulence factors in pathogens but support mutualism by the symbiont S. alvi. In vitro, biofilm formation was reduced in ΔstaB cells and abolished in the other two mutants. Loss of staA also reduced auto-aggregation and cell-cell connections. Based on structural predictions, StaA/B are massive (>300 nm) TAAs with many repeats in their stalk regions. Further, we find that StaA/B are conserved across Snodgrassella species, suggesting that StaA/B-dependent colonization is characteristic of this symbiont lineage. Finally, staA deletion increases sensitivity to bactericidal antimicrobials, suggesting that the biofilm indirectly buffers against antibiotic stress. In all, the inability of two biofilm-deficient strains (ΔstaA and ΔmltA) to effectively mono-colonize bees indicates that S. alvi biofilm formation is required for colonization of the bee gut. We envision the bee gut system as a genetically tractable model for studying the physical basis of biofilm-mutualist-gut interactions.

Adhesion preference of the sticky bacterium Acinetobacter sp. Tol 5

Gram-negative bacterium Acinetobacter sp. Tol 5 exhibits high adhesiveness to various surfaces of general materials, from hydrophobic plastics to hydrophilic glass and metals, via AtaA, an Acinetobacter trimeric autotransporter adhesin Although the adhesion of Tol 5 is nonspecific, Tol 5 cells may have prefer materials for adhesion. Here, we examined the adhesion of Tol 5 and other bacteria expressing different TAAs to various materials, including antiadhesive surfaces. The results highlighted the stickiness of Tol 5 through the action of AtaA, which enabled Tol 5 cells to adhere even to antiadhesive materials, including polytetrafluoroethylene with a low surface free energy, a hydrophilic polymer brush with steric hindrance, and mica with an ultrasmooth surface. Single-cell force spectroscopy as an atomic force microscopy technique revealed the strong cell adhesion force of Tol 5 to these antiadhesive materials. Nevertheless, Tol 5 cells showed a weak adhesion force toward a zwitterionic 2-methacryloyloxyethyl-phosphorylcholine (MPC) polymer-coated surface. Dynamic flow chamber experiments revealed that Tol 5 cells, once attached to the MPC polymer-coated surface, were exfoliated by weak shear stress. The underlying adhesive mechanism was presumed to involve exchangeable, weakly bound water molecules. Our results will contribute to the understanding and control of cell adhesion of Tol 5 for immobilized bioprocess applications and other TAA-expressing pathogenic bacteria of medical importance.

Single-cell adhesion force mapping of a highly sticky bacterium in liquid

The sticky bacterium Acinetobacter sp. Tol 5 adheres to various material surfaces via its cell surface nanofiber protein, AtaA. This adhesiveness has only been evaluated based on the amount of cells adhering to a surface. In this study, the adhesion force mapping of a single Tol 5 cell in liquid using the quantitative imaging mode of atomic force microscopy (AFM) revealed that the adhesion of Tol 5 was near 2 nN, which was 1-2 orders of magnitude higher than that of other adhesive bacteria. The adhesion force of a cell became stronger with the increase in AtaA molecules present on the cell surface. Many fibers of peritrichate AtaA molecules simultaneously interact with a surface, strongly attaching the cell to the surface. The adhesion force of a Tol 5 cell was drastically reduced in the presence of 1% casamino acids but not in deionized water (DW), although both liquids decrease the adhesiveness of Tol 5 cells, suggesting that DW and casamino acids inhibit the cell approaching step and the subsequent direct interaction step of AtaA with surfaces, respectively. Heterologous production of AtaA provided non-adhesive Acinetobacter baylyi ADP1 cells with a strong adhesion force to AFM tip surfaces of silicon and gold.

Development of a Biocontained Toluene-Degrading Bacterium for Environmental Protection

Biocontainment is a safeguard strategy for preventing uncontrolled proliferation of genetically engineered microorganisms (GEMs) in the environment. Biocontained GEMs are designed to survive only in the presence of a specific molecule. The design of a pollutant-degrading and pollutant-dependent GEM prevents its proliferation after cleaning the environment. In this study, we present a biocontained toluene-degrading bacterium based on Acinetobacter sp. Tol 5. The bamA gene, which encodes an essential outer membrane protein, was deleted from the chromosome of Tol 5 but complemented with a plasmid carrying a bamA gene regulated by the Pu promoter and the regulatory protein XylR. The resultant strain (PuBamA) degraded toluene, similarly to the wild-type Tol 5. Although the cell growth of the PuBamA strain was remarkably inhibited after toluene depletion, escape mutants emerged at a frequency of 1 per 5.3 × 10⁻⁷ cells. Analyses of escape mutants revealed that insertion sequences (ISs) carrying promoters were inserted between the Pu promoter and the bamA gene on the complemented plasmid. MinION deep sequencing of the plasmids extracted from the escape mutants enabled the identification of three types of ISs involved in the emergence of escape mutants, suggesting a strategy for reducing it.

IMPORTANCE GEMs are beneficial for various applications, including environmental protection. However, the risks of GEM release into the environment have been debated for a long time. If a pollutant is employed as a specific molecule for a biocontainment system, GEMs capable of degrading pollutants are available for environmental protection. Nevertheless, to our knowledge, biocontained degraders for real pollutants have not been reported in academic journals so far. This is possibly due to the difficulty in the expression of enzymes for degrading pollutants in a tractable bacterium such as Escherichia coli. On the other hand, bacteria with enzymes for degrading pollutants are often intractable as a host of GEMs due to the shortage of tools for genetic manipulation. This study reports the feasibility of a biocontainment strategy for a toluene degrader. Our results provide useful insights into the construction of a GEM biocontainment system for environmental protection.

A conserved region of Acinetobacter trimeric autotransporter adhesion, Ata, provokes suppression of Acinetobacter baumannii virulence

The Acinetobacter trimeric autotransporter adhesin (Ata) is an important virulence factor. The conserved region from the genomic sequence of a 6777bp/2258 amino acid of Acinetobacter baumannii ATCC®19606™ ata was explored. A 263aa of the C-terminal of Ata (rcAta₂₆₃) was expressed. The effect of rcAta₂₆₃ on A. baumannii virulence was studied in a murine model. IgG and IgA were elicited and the mice groups challenged with A. baumannii showed significant survival rates from 66 to 100%. The bacterial loads were determined in the spleens, livers, and lungs of both control and test groups. The adhesion rate of A. baumannii to A549 cells in the presence of serum, cytotoxicity, mutagenicity, and biofilm disruption potential of rcAta₂₆₃ were determined. Intraperitoneally challenged groups showed a significantly reduced bacterial load in the organs of the immunized mice. Intranasal challenge reduced 4 logs of bacterial CFU/g in the test group. The immunized mice sera reduced adherence of A. baumannii to A549 cells to 80%. No cytotoxic or mutagenic effect was detected. Biofilm disruption was significantly increased in the presence of immunized mice sera. Immunization with the conserved region of Ata significantly combats the virulence of A. baumannii which could be considered as a therapeutic strategy to control A. baumannii infections.

Process Description of an Unconventional Biofilm Formation by Bacterial Cells Autoagglutinating through Sticky, Long, and Peritrichate Nanofibers

In this study, we elucidated the formation process of an unconventional biofilm formed by a bacterium autoagglutinating through sticky, long, and peritrichate nanofibers. Understanding the mechanisms of biofilm formation is essential to control microbial behavior and improve environmental biotechnologies. Acinetobacter sp. Tol 5 autoagglutinate through the interaction of the long, peritrichate nanofiber protein AtaA, a trimeric autotransporter adhesin. Using AtaA, without cell growth or extracellular polymeric substances production, Tol 5 cells quickly form an unconventional biofilm. The process forming this unconventional biofilm started with cell-cell interactions, proceeded to cell clumping, and led to the formation of large cell aggregates. The cell-cell interaction was described by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory based on a new concept, which considers two independent interactions between two cell bodies and between two AtaA fiber tips forming a discontinuous surface. If cell bodies cannot collide owing to an energy barrier at low ionic strengths but approach within the interactive distance of AtaA fibers, cells can agglutinate through their contact. Cell clumping proceeds following the cluster-cluster aggregation model, and an unconventional biofilm containing void spaces and a fractal nature develops. Understanding its formation process would extend the utilization of various types of biofilms, enhancing environmental biotechnologies.

Bottom-up Creation of an Artificial Cell Covered with the Adhesive Bacterionanofiber Protein AtaA

The bacterial cell surface structure has important roles for various cellular functions. However, research on reconstituting bacterial cell surface structures is limited. This study aimed to bottom-up create a cell-sized liposome covered with AtaA, the adhesive bacterionanofiber protein localized on the cell surface of Acinetobacter sp. Tol 5, without the use of the protein secretion and assembly machineries. Liposomes containing a benzylguanine derivative-modified phospholipid were decorated with a truncated AtaA protein fused to a SNAP-tag expressed in a soluble fraction in Escherichia coli. The obtained liposome showed a similar surface structure and function to that of native Tol 5 cells and adhered to both hydrophobic and hydrophilic solid surfaces. Furthermore, this artificial cell was able to drive an enzymatic reaction in the adhesive state. The developed artificial cellular system will allow for analysis of not only AtaA, but also other cell surface proteins under a cell-mimicking environment. In addition, AtaA-decorated artificial cells may inspire the development of biotechnological applications that require immobilization of cells onto a variety of solid surfaces, in particular, in environments where the use of genetically modified organisms is prohibited.

Native display of a huge homotrimeric protein fiber on the cell surface after precise domain deletion

AtaA, a trimeric autotransporter adhesin from Acinetobacter sp. Tol 5, exhibits nonspecific, high adhesiveness to abiotic surfaces. For identification of the functional domains of AtaA, precise design of domain-deletion mutants is necessary so as not to cause undesirable structural distortion. Here, we designed and constructed three types of AtaA mutants from which the same domain, FGG1, was deleted. The first mutant was designed to preserve the periodicity of hydrophobic residues in the coiled-coil segments sandwiching the deleted region. After the deletion, the protein was properly displayed on the cell surface and had the same adhesive function as the wild type. Transmission electron microscopy (TEM) imaging and circular dichroism (CD) spectroscopy showed that its isolated passenger domain had the same fiber structure as in the AtaA wild type. In contrast, a mutant designed to disturb the coiled-coil periodicity at the deletion site failed to reach the cell surface. Although secretion occurred for the mutant designed with a flexible connector between the coiled coils, the cells exhibited a decrease in adhesiveness. Furthermore, TEM imaging of the mutant fibers showed bending at the fiber tip and changes in their CD spectrum indicated a decrease in secondary structure content. Thus, we succeeded to natively display the huge homotrimeric fiber structure of AtaA on the cell surface after precise deletion of a domain, maintaining the proper folding state and adhesive function by preserving its coiled-coil periodicity. This strategy enables us to construct various domain-deletion mutants of AtaA without structural distortion for complete functional mapping.

Control of AtaA-mediated bacterial immobilization by casein hydrolysates

Acinetobacter sp. Tol 5 exhibits an autoagglutinating nature and high adhesiveness to various abiotic surfaces through its bacterionanofiber protein AtaA. We have developed new bacterial immobilization methods utilizing the high adhesiveness of AtaA. We previously reported that salt is essential for the adhesiveness of AtaA. In the current study, we unexpectedly found that Tol 5 cells were not immobilized onto polyurethane foam support during growth in LB medium although AtaA was properly expressed and displayed onto the cell surface. The adhesion of Tol 5 resting cells was not affected by sugars but drastically inhibited by yeast extract and casein hydrolysates such as tryptone and casamino acids technical grade (CA-T). Some amino acids, which are major components of CA-T, partially inhibited the adhesion of Tol 5 cells. Experimental results suggested that oligopeptides might effectively inhibit the cell adhesion. Immobilized cells onto the support through AtaA were detached in CA-T solution. Also, the detached cells could be re-immobilized onto the support without impairing of their adhesiveness by replacing CA-T solution to a basal salt medium. Microscopic observation revealed that breaking of AtaA-mediated cell-cell interaction is important for the detachment of Tol 5 cells from the support. CA-T also inhibited AtaA-mediated autoagglutination and dispersed cell clumps through AtaA. This is the first report on adhesion inhibitors against AtaA and suggests that casein hydrolysates like CA-T would be a powerful tool for controlling AtaA-mediated bacterial immobilization.

Cell behavior of the highly sticky bacterium Acinetobacter sp. Tol 5 during adhesion in laminar flows

It is important to characterize how medically, industrially, or environmentally important bacteria adhere to surfaces in liquid flows in order to control their cell adhesion and subsequent biofilm formation. Acinetobacter sp. Tol 5 is a remarkably sticky bacterium that autoagglutinates through the adhesive nanofiber protein AtaA, which is applicable to cell immobilization in bioprocesses. In this study, the adhesion and behavior of Tol 5 cells in laminar flows were investigated using flow cell systems. Tol 5 cells autoagglutinated through AtaA and formed cell clumps during flowing. The cell clumps rather than single cells went downward due to gravity and adhered to the bottom surface. Under appropriate shear stress, a twin vortex was caused by a separated flow generated at the rear of the pre-immobilized cell clumps and carried the small cell clumps to this location, resulting in their stacking there. The rearward immobilized cell clumps developed into a large, stable aggregate with a streamlined shape, independent of cell growth. Cell clumps hardly ever developed under weak shear stress that could not generate a twin vortex and were broken up under excessively strong shear stress. These cell behaviors including the importance of clumping are interesting features in the bacterial adhesion processes.

Host-bacteria interaction and adhesin study for development of therapeutics

Host-pathogen interaction is one of the most important areas of study to understand the adhesion of the pathogen to the host organisms. To adhere on the host cell surface, bacteria assemble the diverse adhesive structures on its surface, which play a foremost role in targeting to the host cell. We have highlighted different bacterial adhesins which are either protein mediated or glycan mediated. The present article listed examples of different bacterial adhesin proteins involved in the interactions with their host, types and subtypes of the fimbriae and non-fimbriae bacterial adhesins. Different bacterial surface adhesin subunits interact with host via different host surface biomolecules. We have also discussed the interactome of some of the pathogens with their host. Therefore, the present study will help researchers to have a detailed understanding of different interacting bacterial adhesins and henceforth, develop new therapies, adhesin specific antibodies and vaccines, which can effectively control pathogenicity of the pathogens.

Reversible bacterial immobilization based on the salt-dependent adhesion of the bacterionanofiber protein AtaA

Background

Immobilization of microbial cells is an important strategy for the efficient use of whole-cell catalysts because it simplifies product separation, enables the cell concentration to be increased, stabilizes enzymatic activity, and permits repeated or continuous biocatalyst use. However, conventional immobilization methods have practical limitations, such as limited mass transfer in the inner part of a gel, gel fragility, cell leakage from the support matrix, and adverse effects on cell viability and catalytic activity. We previously showed a new method for bacterial cell immobilization using AtaA, a member of the trimeric autotransporter adhesin family found in Acinetobacter sp. Tol 5. This approach is expected to solve the drawbacks of conventional immobilization methods. However, similar to all other immobilization methods, the use of support materials increases the cost of bioprocesses and subsequent waste materials.

Results

We found that the stickiness of the AtaA molecule isolated from Tol 5 cells is drastically diminished at ionic strengths lower than 10 mM and that it cannot adhere in deionized water, which also inhibits cell adhesion mediated by AtaA. Cells immobilized on well plates and polyurethane foam in a salt solution were detached in deionized water by rinsing and shaking, respectively. The detached cells regained their adhesiveness in a salt solution and could rapidly be re-immobilized. The cells expressing the ataA gene maintained their adhesiveness throughout four repeated immobilization and detachment cycles and could be repeatedly immobilized to polyurethane foam by a 10-min shake in a flask. We also demonstrated that both bacterial cells and a support used in a reaction could be reused for a different type of reaction after detachment of the initially immobilized cells from the support and a subsequent immobilization step.

Conclusions

We invented a unique reversible immobilization method based on the salt-dependent adhesion of the AtaA molecule that allows us to reuse bacterial cells and supports by a simple manipulation involving a deionized water wash. This mitigates problems caused by the use of support materials and greatly helps to enhance the efficiency and productivity of microbial production processes.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0740-7) contains supplementary material, which is available to authorized users.