Bacteria Delay the Jamming of Particles at Microchannel Bottlenecks

Dynamics of progressive pore clogging by colloidal aggregates

The flow of a suspension through a bottleneck often leads to its obstruction. Such a continuous flow to clogging transition has been well characterized when the constriction width to particle size ratio, W/D, is smaller than 3-4. In such cases, the constriction is either blocked by a single particle that is larger than the constriction width (W/D < 1), or there is an arch formed by several particles that try to enter it together (2 < W/D < 4). For larger W/D ratios, 4 < W/D < 10, the blockage of the constriction is presumed to be due to the successive accumulations of particles. Such a clogging mechanism may also apply to wider pores. The dynamics of this progressive obstruction remains largely unexplored since it is difficult to see through the forming clog and we still do not know how particles accumulate inside the constriction. In this paper, we use particle tracking and image analysis to study the clogging of a constriction/pore by stable colloidal particles. These techniques allow us to determine the shape and the size of all the objects, be they single particles or aggregates, captured inside the pore. We show that even with the rather monodisperse colloidal suspension we used individual particles cannot clog a pore alone. These individual particles can only partially cover the pore surface whilst it is the very small fraction of aggregates present in the suspension that can pile up and clog the pore. We analyzed the dynamics of aggregate motion up to the point of capture within the pore, which helps us to elucidate why the probability of aggregate capture inside the pore is high.

Microfluidics Used as a Tool to Understand and Optimize Membrane Filtration Processes

Membrane filtration processes are best known for their application in the water, oil, and gas sectors, but also in food production they play an eminent role. Filtration processes are known to suffer from a decrease in efficiency in time due to e.g., particle deposition, also known as fouling and pore blocking. Although these processes are not very well understood at a small scale, smart engineering approaches have been used to keep membrane processes running. Microfluidic devices have been increasingly applied to study membrane filtration processes and accommodate observation and understanding of the filtration process at different scales, from nanometer to millimeter and more. In combination with microscopes and high-speed imaging, microfluidic devices allow real time observation of filtration processes. In this review we will give a general introduction on microfluidic devices used to study membrane filtration behavior, followed by a discussion of how microfluidic devices can be used to understand current challenges. We will then discuss how increased knowledge on fundamental aspects of membrane filtration can help optimize existing processes, before wrapping up with an outlook on future prospects on the use of microfluidics within the field of membrane separation.

Dewatering of algal suspension using microfiltration with cross flow in the presence of magnetite as a filter aid

Dewatering algal suspensions is an important step in the extraction of oil and other useful substances from algae. In this study, spherical Nannochloropsis sp. and ellipsoidal Monoraphidium sp. suspensions were dewatered in the presence of different amounts of 350-nm magnetite particles using a microfiltration membrane with 360-nm pores in cross-flow mode. Magnetite functions as a filter aid by reducing the deformation of the cake of filtered algae on the membrane and providing paths for water to flow through the filtration cake of algae. In the case of Nannochloropsis sp., the highest dewatering rate was obtained when the number ratio, defined based on the size and ideal density, between Nannochloropsis sp. and magnetite was 1:12.5, but the addition of magnetite had no observable effect on the filtration of ellipsoidal Monoraphidium sp. suspensions through the membrane. After dewatering, magnetite was effectively separated from the concentrated algal suspension by the application of a magnetic field in an open flow system. Magnetite has the potential to enhance dewatering performance using a cross-flow membrane system.