Effect of high-flux, low-energy He+ ion irradiation on Ta as a plasma-facing material

Innovative enhancement of electron tunneling synergy in carbon-doped Ta2O5CuO photocatalyst with nematic liquid crystal for safe drinking water

This study focuses on enhancing the photocatalytic properties of carbon-doped Ta2O5CuO (C-Ta2O5CuO) nanocomposites for drinking water purification. The nanocomposites were fabricated by depositing C-Ta2O5CuO onto Nematic Liquid Crystal Polaroid (NLCP) obtained from a discarded laptop monitor, employing the sputter deposition method. The X-ray diffraction (XRD) and High-resolution transmission electron microscopy (HRTEM) determined the nanocomposite thin films' crystallinity and structural properties. The EDX and XPS analyses confirmed the elemental composition and reality of the Cu-incorporated Ta2O5 nanocomposites, respectively. The combination of electron tunneling enhancement provided by the NLCP and graphitic carbon led to exceptional photocatalytic performance. This was particularly evident in the efficient degradation of P-Rosaniline Hydrochloride (PRH) dye in an aqueous medium. C-Ta2O5CuO catalytic activities were estimated at various dye concentrations, repeatability, reusability with time, and kinetics. Coating's stability and long-term activity in photocatalysis reactions were also tested. Additionally, Cu present in the C-Ta2O5CuO and ˙OH radicals exhibited remarkable bactericidal activity. They displayed significant antibacterial efficacy against both gram-positive Escherichia coli (E. coli) and gram-negative Staphylococcus aureus (S. aureus) bacteria. These findings have significant implications for the development of advanced materials with potent photocatalytic and antibacterial properties, holding promise for improving drinking water quality and addressing environmental and health challenges.

Sputter -coated N-enriched mixed metal oxides (Ta2O5-Nb2O5-N) composite: A resilient solar driven photocatalyst for water purification

This study demonstrated the formation of N-enriched mixed metal oxides (Ta₂O₅-Nb₂O₅-N and Ta₂O₅-Nb₂O₅) thin film composites used as photocatalysts to degrade P-Rosaniline Hydrochloride (PRH-Dye) dye under solar radiation. By controlling the N gas flow rate during the sputtering process, the N concentration in the Ta₂O₅-Nb₂O₅-N composite is significantly included, and demonstrated by XPS and HRTEM analysis. With the help of XPS and HRTEM investigations, it was determined that the addition of N to Ta₂O₅-Nb₂O₅-N significantly enhances the active sites. The Ta-O-N bond (N 1 s and Ta 4p_3/2 spectra) was verified by the XPS spectra. Ta₂O₅-Nb₂O₅ was found to have a lattice interplanar distance (d-spacing) of 2.52, whereas Ta₂O₅-Nb₂O₅-N showed the 2.5 (620 planes). A sputter-coated Ta₂O₅-Nb₂O₅and Ta₂O₅-Nb₂O₅-N photocatalysts were prepared, and their photocatalytic activity was evaluated using PRH-Dye as a model pollutant under solar radiation by adding H₂O₂ (0.01 mol). The photocatalytic activity of the Ta₂O₅-Nb₂O₅-N composite was compared with TiO₂ (P-25) and Ta₂O₅-Nb₂O₅. Ta₂O₅-Nb₂O₅-N showed very high photocatalytic activity compared to Degussa P-25 TiO₂ and Ta₂O₅-Nb₂O₅ under solar radiation and confirmed the presence of N in Ta₂O₅-Nb₂O₅-N significantly increased the generation of ˙OH radicals (in pH 3, 7 and 9). With the use of LC/MS, the stable intermediates or metabolite created during the photooxidation of PRH-Dye were assessed. The results of this study will provide useful insights on how Ta₂O₅-Nb₂O₅-N influences the efficiency of water pollution remediation.

Characterisation of lattice damage formation in tantalum irradiated at variable temperatures

The formation of radiation-induced dislocation loops and voids in tantalum at 180(2), 345(3) and 590(5)°C was assessed by 3MeV proton irradiation experiments and subsequent damage characterisation using transmission electron microscopy. Voids formed at 345(3)°C and were arranged into a body centred cubic lattice at a damage level of 0.55 dpa. The low vacancy mobility at 180(2)°C impedes enough vacancy clustering and therefore the formation of voids visible by TEM. At 590(5)°C the Burgers vector of the interstitial-type dislocation loops is a<100>, instead of the a/2 <111> Burgers vector characteristic of the loops at 180(2) and 345(3)°C. The lower mobility of a<100> loops hinders the formation of voids at 590(5)°C up to a damage level of 0.55 dpa.