Quantification of Detergents Complexed with Membrane Proteins

Purification and characterization of Cdr1, the drug-efflux pump conferring azole resistance in Candida species

Candida albicans and C. glabrata express exporters of the ATP-binding cassette (ABC) superfamily and address them to their plasma membrane to expel azole antifungals, which cancels out their action and allows the yeast to become multidrug resistant (MDR). In a way to understand this mechanism of defense, we describe the purification and characterization of Cdr1, the membrane ABC exporter mainly responsible for such phenotype in both species. Cdr1 proteins were functionally expressed in the baker yeast, tagged at their C-terminal end with either a His-tag for the glabrata version, cgCdr1-His, or a green fluorescent protein (GFP) preceded by a proteolytic cleavage site for the albicans version, caCdr1-P-GFP. A membrane Cdr1-enriched fraction was then prepared to assay several detergents and stabilizers, probing their level of extraction and the ATPase activity of the proteins as a functional marker. Immobilized metal-affinity and size-exclusion chromatographies (IMAC, SEC) were then carried out to isolate homogenous samples. Overall, our data show that although topologically and phylogenetically close, both proteins display quite distinct behaviors during the extraction and purification steps, and qualify cgCdr1 as a good candidate to characterize this type of proteins for developing future inhibitors of their azole antifungal efflux activity.

Multiple Roles of a Conserved Glutamate Residue for Unique Biophysical Properties in a New Group of Microbial Rhodopsins Homologous to TAT Rhodopsin

TAT rhodopsin, a microbial rhodopsin found in the marine SAR11 bacterium HIMB114, uniquely possesses a Thr-Ala-Thr (TAT) motif in the third transmembrane helix. Because of a low pKa value of the retinal Schiff base (RSB), TAT rhodopsin exhibits both a visible light-absorbing state with the protonated RSB and a UV-absorbing state with the deprotonated RSB at a neutral pH. The UV-absorbing state, in contrast to the visible light-absorbing one, converts to a long-lived photointermediate upon light absorption, implying that TAT rhodopsin functions as a pH-dependent light sensor. Despite detailed biophysical characterization and mechanistic studies on the TAT rhodopsin, it has been unknown whether other proteins with similarly unusual features exist. Here, we identified several new rhodopsin genes homologous to the TAT rhodopsin of HIMB114 (TATHIMB) from metagenomic data. Based on the absorption spectra of expressed proteins from these genes with visible and UV peaks similar to that of TATHIMB, they were classified as Twin-peaked Rhodopsin (TwR) family. TwR genes form a gene cluster with a set of 13 ORFs conserved in subclade IIIa of SAR11 bacteria. A glutamic acid in the second transmembrane helix, Glu54, is conserved in all of the TwRs. We investigated E54Q mutants of two TwRs and revealed that Glu54 plays critical roles in regulating the RSB pKa, oligomer formation, and the efficient photoreaction of the UV-absorbing state. The discovery of novel TwRs enables us to study the universality and individuality of the characteristics revealed so far in the original TATHIMB and contributes to further studies on mechanisms of unique properties of TwRs.

Starting with an Integral Membrane Protein Project for Structural Biology: Production, Purification, Detergent Quantification, and Buffer Optimization-Case Study of the Exporter CntI from Pseudomonas aeruginosa

Production, extraction, purification, and stabilization of integral membrane proteins are key steps for successful structural biology studies, in particular for X-ray crystallography or single particle microscopy. Here, we present the purification protocol of CntI from Pseudomonas aeruginosa, a new metallophore exporter of the Drug Metabolite Transporter (DMT) family involved in pseudopaline secretion. Subsequent to CntI purification, we optimized the buffer pH, salts, and additives by differential scanning fluorimetry (DSF), also known as Thermofluor Assay (TFA) or fluorescent thermal stability assay (FTSA), with the use of dye 1-AnilinoNaphthalene-8-Sulfonic acid (ANS), a fluorescent molecule compatible with detergents. After the buffer optimization, the purified CntI was analyzed by Size Exclusion Chromatography coupled with Multi-Angle Laser Light Scattering (SEC-MALLS), UV absorbance, and Refractive Index detectors, in order to determine the absolute molar mass of the protein-detergent complex, the detergent amount bound to the protein and the amount of protein-free detergent micelles. Altogether, these biophysical techniques give preliminary and mandatory information about the suitability of the purified membrane protein for further biophysical or structural investigations.

Cloning and Overexpressing Membrane Proteins Using Pichia pastoris (Komagataella phaffii)

Understanding the structure and function of key proteins located within biological membranes is essential for fundamental knowledge and therapeutic applications. Robust cell systems allowing their actual overexpression are required, among which stands the methylotrophic yeast Pichia pastoris. This system proves highly efficient in producing many eukaryotic membrane proteins of various functions and structures at levels and quality compatible with their subsequent isolation and molecular investigation. This article describes a set of basic guidelines and directions to clone and select recombinant P. pastoris clones overexpressing eukaryotic membrane proteins. Illustrative results obtained for a panel of mammalian membrane proteins are presented, and hints are given on a series of experimental parameters that may substantially improve the amount and/or the functionality of the expressed proteins. © 2023 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Designing and cloning a P. pastoris expression vector Basic Protocol 2: Integrative transformation of P. pastoris and selection of recombinant clones Basic Protocol 3: Culturing transformed P. pastoris for membrane protein expression Basic Protocol 4: Yeast cell lysis and membrane preparation Basic Protocol 5: Immunodetection of expressed membrane proteins: western blot Alternate Protocol 1: Immunodetection of expressed membrane proteins: dot blot Alternate Protocol 2: Immunodetection of expressed membrane proteins: yeastern blot Basic Protocol 6: Activity assay: ligand-binding analysis of an expressed GPCR.

Emergence of mass spectrometry detergents for membrane proteomics

Detergents enable the investigation of membrane proteins by mass spectrometry. Detergent designers aim to improve underlying methodologies and are confronted with the challenge to design detergents with optimal solution and gas-phase properties. Herein, we review literature related to the optimization of detergent chemistry and handling and identify an emerging research direction: the optimization of mass spectrometry detergents for individual applications in mass spectrometry-based membrane proteomics. We provide an overview about qualitative design aspects including their relevance for the optimization of detergents in bottom-up proteomics, top-down proteomics, native mass spectrometry, and Nativeomics. In addition to established design aspects, such as charge, concentration, degradability, detergent removal, and detergent exchange, it becomes apparent that detergent heterogeneity is a promising key driver for innovation. We anticipate that rationalizing the role of detergent structures in membrane proteomics will serve as an enabling step for the analysis of challenging biological systems.

Travel light: Essential packing for membrane proteins with an active lifestyle

We review the considerable progress during the recent decade in the endeavours of designing, optimising, and utilising carrier particle systems for structural and functional studies of membrane proteins in near-native environments. New and improved systems are constantly emerging, novel studies push the perceived limits of a given carrier system, and specific carrier systems consolidate and entrench themselves as the system of choice for particular classes of target membrane protein systems. This review covers the most frequently used carrier systems for such studies and emphasises similarities and differences between these systems as well as current trends and future directions for the field. Particular interest is devoted to the biophysical properties and membrane mimicking ability of each system and the manner in which this may impact an embedded membrane protein and an eventual structural or functional study.

The non-Newtonian behavior of detergents during concentration is increased by macromolecules, in trans, and results in their over-concentration

Concentration of pure membrane proteins in detergent solution results in detergent concentration, albeit in unknown amounts. This phenomenon is observed in every lab working on membrane proteins, but has seldom been investigated. In this study, we explored the behavior of detergents mixed with membrane proteins during the step of sample concentration using centrifugal devices. We show that detergent over-concentrate with the presence of polymers, typically membrane or soluble proteins but also polysaccharides. The over-concentration of detergents depends on centrifugal force applied to the device. With the use of a specific dye, we observed the formation of a mesh on the concentrator device. Importantly, reducing the centrifugal speed allows to reduce the concentration of detergents when mixed to macromolecules, as tested with 3 different membrane proteins. All together, these results highlight the non-Newtonian behavior of detergents and provides a solid framework to investigators to improve drastically biochemical and structural studies of membrane proteins.

Cost-effective Purification of Membrane Proteins using a Dual-detergent Strategy

Understanding the mechanisms of membrane protein function is critical for biomedical research and drug discovery as membrane proteins constitute ∼30% of the proteins encoded by the genomes of both lower and higher organisms and are targets for two-thirds of approved drugs worldwide. Significant progress has been made in engineering host expression systems for large-scale production of membrane proteins and in determining their three-dimensional high-resolution structures. Despite these efforts, the study of membrane proteins at the atomic level is challenging due to poor expression and extraction, low yields of functional protein, and the complexity and heterogeneity of source membranes. Structural and spectroscopic studies of any membrane protein require that the protein be extracted from its native membranes into a membrane-mimetic stable environment, which is often achieved by the use of detergents. Unfortunately, there is no magic detergent that can extract all membrane proteins and successful extraction often requires a thorough screen of detergents. Furthermore, membrane protein purification in general and the detergents used are very expensive, which puts a financial constraint on sophisticated membrane protein studies. To overcome this hurdle, a dual-detergent strategy has recently been developed and successfully applied to purify various classes of pure, stable, and functionally relevant membrane proteins in a cost-effective manner. This strategy uses an inexpensive detergent for solubilization of the desired protein from membranes and a second detergent during protein purification. In the Basic Protocol, we describe the dual-detergent strategy to significantly reduce the overall purification cost of a bacterial membrane protein using the magnesium ion channel MgtE as an example. Support Protocols are also provided for selecting a suitable E. coli strain for protein expression and the optimal detergent(s) for membrane protein solubilization. © 2022 Wiley Periodicals LLC. Basic Protocol: Expression, membrane solubilization, and cost-effective purification of MgtE Support Protocol 1: Selecting a suitable E. coli strain for optimal protein expression Support Protocol 2: Identification of suitable detergents for membrane protein solubilization.

Autoinhibition and regulation by phosphoinositides of ATP8B1, a human lipid flippase associated with intrahepatic cholestatic disorders

P4-ATPases flip lipids from the exoplasmic to the cytosolic leaflet, thus maintaining lipid asymmetry in eukaryotic cell membranes. Mutations in several human P4-ATPase genes are associated with severe diseases, for example in ATP8B1 causing progressive familial intrahepatic cholestasis, a rare inherited disorder progressing toward liver failure. ATP8B1 forms a binary complex with CDC50A and displays a broad specificity to glycerophospholipids, but regulatory mechanisms are unknown. Here, we report functional studies and the cryo-EM structure of the human lipid flippase ATP8B1-CDC50A at 3.1 Å resolution. We find that ATP8B1 is autoinhibited by its N- and C-terminal tails, which form extensive interactions with the catalytic sites and flexible domain interfaces. Consistently, ATP hydrolysis is unleashed by truncation of the C-terminus, but also requires phosphoinositides, most markedly phosphatidylinositol-3,4,5-phosphate (PI(3,4,5)P₃), and removal of both N- and C-termini results in full activation. Restored inhibition of ATP8B1 truncation constructs with a synthetic peptide mimicking the C-terminal segment further suggests molecular communication between N- and C-termini in the autoinhibition and demonstrates that the regulatory mechanism can be interfered with by exogenous compounds. A recurring (G/A)(Y/F)AFS motif of the C-terminal segment suggests that this mechanism is employed widely across P4-ATPase lipid flippases in plasma membrane and endomembranes.

Substrate-bound and substrate-free outward-facing structures of a multidrug ABC exporter

Multidrug ABC transporters translocate drugs across membranes by a mechanism for which the molecular features of drug release are so far unknown. Here, we resolved three ATP-Mg²⁺-bound outward-facing conformations of the Bacillus subtilis (homodimeric) BmrA by x-ray crystallography and single-particle cryo-electron microscopy (EM) in detergent solution, one of them with rhodamine 6G (R6G), a substrate exported by BmrA when overexpressed in B. subtilis. Two R6G molecules bind to the drug-binding cavity at the level of the outer leaflet, between transmembrane (TM) helices 1-2 of one monomer and TM5'-6' of the other. They induce a rearrangement of TM1-2, highlighting a local flexibility that we confirmed by hydrogen/deuterium exchange and molecular dynamics simulations. In the absence of R6G, simulations show a fast postrelease occlusion of the cavity driven by hydrophobicity, while when present, R6G can move within the cavity, maintaining it open.

Substrate-bound and substrate-free outward-facing structures of a multidrug ABC exporter

Multidrug ABC transporters translocate drugs across membranes by a mechanism for which the molecular features of drug release are so far unknown. Here, we resolved three ATP-Mg²⁺-bound outward-facing conformations of the Bacillus subtilis (homodimeric) BmrA by x-ray crystallography and single-particle cryo-electron microscopy (EM) in detergent solution, one of them with rhodamine 6G (R6G), a substrate exported by BmrA when overexpressed in B. subtilis. Two R6G molecules bind to the drug-binding cavity at the level of the outer leaflet, between transmembrane (TM) helices 1-2 of one monomer and TM5'-6' of the other. They induce a rearrangement of TM1-2, highlighting a local flexibility that we confirmed by hydrogen/deuterium exchange and molecular dynamics simulations. In the absence of R6G, simulations show a fast postrelease occlusion of the cavity driven by hydrophobicity, while when present, R6G can move within the cavity, maintaining it open.

Cryo-EM of CcsBA reveals the basis for cytochrome c biogenesis and heme transport

Although the individual structures and respiratory functions of cytochromes are well studied, the structural basis for their assembly, including transport of heme for attachment, are unknown. We describe cryo-electron microscopy (cryo-EM) structures of CcsBA, a bifunctional heme transporter and cytochrome c (cyt c) synthase. Models built from the cryo-EM densities show that CcsBA is trapped with heme in two conformations, herein termed the closed and open states. The closed state has heme located solely at a transmembrane (TM) site, with a large periplasmic domain oriented such that access of heme to the cytochrome acceptor is denied. The open conformation contains two heme moieties, one in the TM-heme site and another in an external site (P-heme site). The presence of heme in the periplasmic site at the base of a chamber induces a large conformational shift that exposes the heme for reaction with apocytochrome c (apocyt c). Consistent with these structures, in vivo and in vitro cyt c synthase studies suggest a mechanism for transfer of the periplasmic heme to cytochrome.

Dynamics of Apolipoprotein B-100 in Interaction with Detergent Probed by Incoherent Neutron Scattering

Apolipoprotein B-100 (apo B-100) is the protein moiety of both low- and very-low-density lipoproteins, whose role is crucial to cholesterol and triglyceride transport. Aiming at the molecular dynamics' details of apo B-100, scarcely studied, we performed elastic and quasi-elastic incoherent neutron scattering (EINS, QENS) experiments combining different instruments and time scales. Similar to classical membrane proteins, the solubilization results in remaining detergent, here Nonidet P-40 (NP40). Therefore, we propose a framework for QENS studies of protein-detergent complexes, with the introduction of a combined model, including the experimental apo B-100/NP40 ratio. Relying on the simultaneous analysis of all QENS amplitudes, this approach is sensitive enough to separate both contributions. Its application identified two points: (i) apo B-100 slow dynamics and (ii) the acceleration of NP40 dynamics in the presence of apo B-100. Direct translation of the exposed methodology now makes the investigation of more membrane proteins by neutron spectroscopy achievable.

Effectiveness of dual-detergent strategy using Triton X-100 in membrane protein purification

Membrane solubilization by detergents is a critical step for successful membrane protein purification. Alkyl maltoside detergents such as DDM and DM are very expensive and are commonly used to produce most of the high-quality proteins in stable and functional form. Recently, dual-detergent strategy using inexpensive detergents for membrane solubilization step has been shown to be highly effective in purifying different classes of membrane proteins in a cost-effective manner. In this work, we have monitored the effectiveness of 'dual-detergent strategy' towards successful purification of the isolated voltage sensing domain (VSD) of KvAP and the inward rectifying K⁺ channel, KirBac1.1. We demonstrate that the inexpensive detergent Triton X-100 extracts the activated conformation of the KvAP-VSD well without compromising the structural integrity of the sensor, and also retains its proper structural dynamics. Importantly, the cost associated with solubilizing the KvAP sensor can be reduced by ∼2000 fold. To the best of our knowledge, our results constitute the first report characterizing the purification of KvAP voltage sensor using an inexpensive detergent. However, the dual-detergent strategy using Triton X-100 for membrane solubilization is not effective for the purification of inward rectifying K⁺ channel, KirBac1.1 even in presence of high salt concentration during solubilization. We propose that the dual-detergent strategy will be useful for extracting stable and functional proteins that are both DDM- and DM-extractable, but will be ineffective if the protein is only DM-extractable. The relevance of the effectiveness of dual-detergent strategy with respect to the hydrophobic thickness of proteins is discussed.

MmpL3, the trehalose monomycolate transporter, is stable in solution in several detergents and can be reconstituted into peptidiscs

Mycobacteria possess a complex and waxy cell wall comprising a large panel of glycolipids. Among these, trehalose monomycolate (TMM) represents abundant and crucial components for the elaboration of the mycomembrane. TMM is synthesized in the cytoplasmic compartment and translocated across the inner membrane by the MmpL3 transporter. Inhibitors impeding TMM transport by targeting MmpL3 show great promises as new antimycobacterials. The recent X-ray or Cryo-EM structures of MmpL3 complexed to TMM or its inhibitors have shed light on the mechanisms of TMM transport and inhibition. So far, purification procedures mainly involved the use of n-Dodecyl-ß-d-Maltopyranoside to solubilize and stabilize MmpL3 from Mycobacterium smegmatis (MmpL3_Msm) or Lauryl Maltose Neopentyl Glycol for MmpL3 from Mycobacterium tuberculosis. Herein, we explored the possibility to solubilize and stabilize MmpL3 with other detergents. We demonstrate that several surfactants from the ionic, non-ionic and zwitterionic classes are prone to solubilize MmpL3_Msm expressed in Escherichia coli. The capacity of these detergents to stabilize MmpL3_Msm was evaluated by size-exclusion chromatography and thermal stability. This study unraveled three new detergents DM, LDAO and sodium cholate that favor solubilization and stabilization of MmpL3_Msm in solution. In addition, we report a protocol that allows reconstitution of MmpL3_Msm into peptidiscs.

CryoEM structure of the outer membrane secretin channel pIV from the f1 filamentous bacteriophage

The Ff family of filamentous bacteriophages infect gram-negative bacteria, but do not cause lysis of their host cell. Instead, new virions are extruded via the phage-encoded pIV protein, which has homology with bacterial secretins. Here, we determine the structure of pIV from the f1 filamentous bacteriophage at 2.7 Å resolution by cryo-electron microscopy, the first near-atomic structure of a phage secretin. Fifteen f1 pIV subunits assemble to form a gated channel in the bacterial outer membrane, with associated soluble domains projecting into the periplasm. We model channel opening and propose a mechanism for phage egress. By single-cell microfluidics experiments, we demonstrate the potential for secretins such as pIV to be used as adjuvants to increase the uptake and efficacy of antibiotics in bacteria. Finally, we compare the f1 pIV structure to its homologues to reveal similarities and differences between phage and bacterial secretins.

Expression, purification and characterization of human proton-coupled oligopeptide transporter 1 hPEPT1

The human peptide transporter hPEPT1 (SLC15A1) is responsible for uptake of dietary di- and tripeptides and a number of drugs from the small intestine by utilizing the proton electrochemical gradient, and hence an important target for peptide-like drug design and drug delivery. hPEPT1 belongs to the ubiquitous major facilitator superfamily that all contain a 12TM core structure, with global conformational changes occurring during the transport cycle. Several bacterial homologues of these transporters have been characterized, providing valuable insight into the transport mechanism of this family. Here we report the overexpression and purification of recombinant hPEPT1 in a detergent-solubilized state. Thermostability profiling of hPEPT1 at different pH values revealed that hPEPT1 is more stable at pH 6 as compared to pH 7 and 8. Micro-scale thermophoresis (MST) confirmed that the purified hPEPT1 was able to bind di- and tripeptides respectively. To assess the in-solution oligomeric state of hPEPT1, negative stain electron microscopy was performed, demonstrating a predominantly monomeric state.

Analytical Ultracentrifugation as a Matrix-Free Probe for the Study of Kinase Related Cellular and Bacterial Membrane Proteins and Glycans

Analytical ultracentrifugation is a versatile approach for analysing the molecular mass, molecular integrity (degradation/aggregation), oligomeric state and association/dissociation constants for self-association, and assay of ligand binding of kinase related membrane proteins and glycans. It has the great property of being matrix free-providing separation and analysis of macromolecular species without the need of a separation matrix or membrane or immobilisation onto a surface. This short review-designed for the non-hydrodynamic expert-examines the potential of modern sedimentation velocity and sedimentation equilibrium and the challenges posed for these molecules particularly those which have significant cytoplasmic or extracellular domains in addition to the transmembrane region. These different regions can generate different optimal requirements in terms of choice of the appropriate solvent (aqueous/detergent). We compare how analytical ultracentrifugation has contributed to our understanding of two kinase related cellular or bacterial protein/glycan systems (i) the membrane erythrocyte band 3 protein system-studied in aqueous and detergent based solvent systems-and (ii) what it has contributed so far to our understanding of the enterococcal VanS, the glycan ligand vancomycin and interactions of vancomycin with mucins from the gastrointestinal tract.

CryoEM reconstructions of membrane proteins solved in several amphipathic solvents, nanodisc, amphipol and detergents, yield amphipathic belts of similar sizes corresponding to a common ordered solvent layer

To maintain membrane proteins soluble in aqueous solution, amphipathic compounds are used to shield the hydrophobic patch of their membrane insertion, which forms a belt around the protein. This amphipathic belt is seldom looked at due to the difficulty to visualize it. Cryo-EM is now offering this possibility, where belts are visible in 3D reconstructions. We investigated membrane proteins solved in nanodiscs, amphipols or detergents to analyze whether the nature of the amphipathic compound influences the belt size in 3D reconstructions. We identified belt boundaries in map-density distributions and measured distances for every reconstruction. We showed that all the belts create on average similar reconstructions, whether they originate from the same protein, or from protein from different shapes and structures. There is no difference among detergents or types of nanodisc used. These observations illustrate that the belt observed in 3D reconstructions corresponds to the minimum ordered layer around membrane proteins.

The Det.Belt Server: A Tool to Visualize and Estimate Amphipathic Solvent Belts around Membrane Proteins

Detergents wrap around membrane proteins to form a belt covering the hydrophobic part of the protein serving for membrane insertion and interaction with lipids. The number of detergent monomers forming this belt is usually unknown to investigators, unless dedicated detergent quantification is undertaken, which for many projects is difficult to setup. Yet, having an approximate knowledge of the amount of detergent forming the belt is extremely useful, to better grasp the protein of interest in interaction with its direct environment rather than picturing the membrane protein "naked". We created the Det.Belt server to dress up membrane proteins and represent in 3D the bulk made by detergent molecules wrapping in a belt. Many detergents are included in a database, allowing investigators to screen in silico the effect of different detergents around their membrane protein. The input number of detergents is changeable with fast recomputation of the belt for interactive usage. Metrics representing the belt are readily available together with scripts to render quality 3D images for publication. The Det.Belt server is a tool for biochemists to better grasp their sample.

Identification and Characterization of Two Transmembrane Proteins Required for Virulence of Ustilago maydis

Smut fungi comprise a large group of biotrophic phytopathogens infecting important crops such as wheat and corn. Through the secretion of effector proteins, the fungus actively suppresses plant immune reactions and modulates its host's metabolism. Consequently, how soluble effector proteins contribute to virulence is already characterized in a range of phytopathogens. However, membrane-associated virulence factors have been much less studied to date. Here, we investigated six transmembrane (TM) proteins that show elevated gene expression during biotrophic development of the maize pathogen Ustilago maydis. We show that two of the six proteins, named Vmp1 and Vmp2 (virulence-associated membrane protein), are essential for the full virulence of U. maydis. The deletion of the corresponding genes leads to a substantial attenuation in the virulence of U. maydis. Furthermore, both are conserved in various related smuts and contain no domains of known function. Our biochemical analysis clearly shows that Vmp1 and Vmp2 are membrane-associated proteins, potentially localizing to the U. maydis plasma membrane. Mass photometry and light scattering suggest that Vmp1 mainly occurs as a monomer, while Vmp2 is dimeric. Notably, the large and partially unstructured C-terminal domain of Vmp2 is crucial for virulence while not contributing to dimerization. Taken together, we here provide an initial characterization of two membrane proteins as virulence factors of U. maydis.

Expression, purification and characterization of the IcmG and IcmK proteins of the type IVB secretion system from Coxiella burnetii

Coxiella burnetii, the causative agent of Q fever, is an intracellular bacterial pathogen. Studies on Coxiella have shown that a type IVB secretion system (T4BSS) contributes to the establishment of the infection by transferring protein molecules. In this report, we focus on two core proteins of the Coxiella T4BSS, namely the IcmG/DotF protein (CBU_1626) and the IcmK/DotH protein (CBU_1628). Here we present a method for the recombinant expression of IcmG and IcmK in E. coli. IcmG was purified by Strep-Tactin affinity chromatography and size exclusion chromatography, while for the purification of IcmK an additional anion exchange chromatography step was introduced. The yields of the purified IcmG and IcmK proteins were 1.2 mg/L and 3 mg/L, respectively. The purified proteins showed predominant band on SDS-PAGE gel of 37 kDa for the IcmG and 40 kDa for the IcmK. Protein folding is confirmed by circular dichroism spectroscopy. The dynamic light scattering experiment indicated that IcmG and IcmK existed in a homogenous form. Further Blue native PAGE indicates the presences of a monomeric form for the IcmK and IcmG. Our work lays the basis for functional exploration and structural determination of IcmG and IcmK proteins of Coxiella's secretion system.

Sarcolipin alters SERCA1a interdomain communication by impairing binding of both calcium and ATP

Sarcolipin (SLN), a single-spanning membrane protein, is a regulator of the sarco-endoplasmic reticulum Ca2+-ATPase (SERCA1a). Chemically synthesized SLN, palmitoylated or not (pSLN or SLN), and recombinant wild-type rabbit SERCA1a expressed in S. cerevisiae design experimental conditions that provide a deeper understanding of the functional role of SLN on the regulation of SERCA1a. Our data show that chemically synthesized SLN interacts with recombinant SERCA1a, with calcium-deprived E2 state as well as with calcium-bound E1 state. This interaction hampers the binding of calcium in agreement with published data. Unexpectedly, SLN has also an allosteric effect on SERCA1a transport activity by impairing the binding of ATP. Our results reveal that SLN significantly slows down the E2 to Ca2.E1 transition of SERCA1a while it affects neither phosphorylation nor dephosphorylation. Comparison with chemically synthesized SLN deprived of acylation demonstrates that palmitoylation is not necessary for either inhibition or association with SERCA1a. However, it has a small but statistically significant effect on SERCA1a phosphorylation when various ratios of SLN-SERCA1a or pSLN-SERCA1a are tested.

The cytoplasmic domain of the AAA+ protease FtsH is tilted with respect to the membrane to facilitate substrate entry

AAA+ proteases are degradation machines that use ATP hydrolysis to unfold protein substrates and translocate them through a central pore toward a degradation chamber. FtsH, a bacterial membrane-anchored AAA+ protease, plays a vital role in membrane protein quality control. How substrates reach the FtsH central pore is an open key question that is not resolved by the available atomic structures of cytoplasmic and periplasmic domains. In this work, we used both negative stain TEM and cryo-EM to determine 3D maps of the full-length Aquifex aeolicus FtsH protease. Unexpectedly, we observed that detergent solubilization induces the formation of fully active FtsH dodecamers, which consist of two FtsH hexamers in a single detergent micelle. The striking tilted conformation of the cytosolic domain in the FtsH dodecamer visualized by negative stain TEM suggests a lateral substrate entrance between the membrane and cytosolic domain. Such a substrate path was then resolved in the cryo-EM structure of the FtsH hexamer. By mapping the available structural information and structure predictions for the transmembrane helices to the amino acid sequence we identified a linker of ∼20 residues between the second transmembrane helix and the cytosolic domain. This unique polypeptide appears to be highly flexible and turned out to be essential for proper functioning of FtsH as its deletion fully eliminated the proteolytic activity of FtsH.

Diastereomeric Cyclopentane-Based Maltosides (CPMs) as Tools for Membrane Protein Study

Amphiphilic agents, called detergents, are invaluable tools for studying membrane proteins. However, membrane proteins encapsulated by conventional head-to-tail detergents tend to denature or aggregate, necessitating the development of structurally distinct molecules with improved efficacy. Here, a novel class of diastereomeric detergents with a cyclopentane core unit, designated cyclopentane-based maltosides (CPMs), were prepared and evaluated for their ability to solubilize and stabilize several model membrane proteins. A couple of CPMs displayed enhanced behavior compared with the benchmark conventional detergent, n-dodecyl-β-d-maltoside (DDM), for all the tested membrane proteins including two G-protein-coupled receptors (GPCRs). Furthermore, CPM-C12 was notable for its ability to confer enhanced membrane protein stability compared with the previously developed conformationally rigid NBMs [J. Am. Chem. Soc. 2017, 139, 3072] and LMNG. The effect of the individual CPMs on protein stability varied depending on both the detergent configuration (cis/trans) and alkyl chain length, allowing us draw conclusions on the detergent structure-property-efficacy relationship. Thus, this study not only provides novel detergent tools useful for membrane protein research but also reports on structural features of the detergents critical for detergent efficacy in stabilizing membrane proteins.

Structure and Dynamics of GPCRs in Lipid Membranes: Physical Principles and Experimental Approaches

Over the past decade, the vast amount of information generated through structural and biophysical studies of GPCRs has provided unprecedented mechanistic insight into the complex signalling behaviour of these receptors. With this recent information surge, it has also become increasingly apparent that in order to reproduce the various effects that lipids and membranes exert on the biological function for these allosteric receptors, in vitro studies of GPCRs need to be conducted under conditions that adequately approximate the native lipid bilayer environment. In the first part of this review, we assess some of the more general effects that a membrane environment exerts on lipid bilayer-embedded proteins such as GPCRs. This is then followed by the consideration of more specific effects, including stoichiometric interactions with specific lipid subtypes. In the final section, we survey a range of different membrane mimetics that are currently used for in vitro studies, with a focus on NMR applications.

Proton-Detected Solid-State NMR of the Cell-Free Synthesized α-Helical Transmembrane Protein NS4B from Hepatitis C Virus

Proton-detected 100 kHz magic-angle-spinning (MAS) solid-state NMR is an emerging analysis method for proteins with only hundreds of microgram quantities, and thus allows structural investigation of eukaryotic membrane proteins. This is the case for the cell-free synthesized hepatitis C virus (HCV) nonstructural membrane protein 4B (NS4B). We demonstrate NS4B sample optimization using fast reconstitution schemes that enable lipid-environment screening directly by NMR. 2D spectra and relaxation properties guide the choice of the best sample preparation to record 2D 1 H-detected 1 H,15 N and 3D 1 H,13 C,15 N correlation experiments with linewidths and sensitivity suitable to initiate sequential assignments. Amino-acid-selectively labeled NS4B can be readily obtained using cell-free synthesis, opening the door to combinatorial labeling approaches which should enable structural studies.

Novel calixarene-based surfactant enables low dose split inactivated vaccine protection against influenza infection

Influenza A viruses cause major morbidity and represent a severe global health problem. Current influenza vaccines are mainly egg-based products requiring the split of whole viruses using classical detergents such as Triton X-100, which implies certain limitations. Here, we report the use of the novel calixarene-based surfactant CALX133ACE as an alternative to classical detergents for influenza inactivated split vaccine preparation. We confirmed that CALX133ACE-based split HA antigens are fully functional and quantifiable by the "gold standard" method SRID. Additionally, as in the case of the Triton X-100-based split, the CALX133ACE-based split antigens are stable for at least 6 months at 4 °C. Moreover, immunization of mice with CALX133ACE-based split NYMC X-179A (H1N1) antigens harboring 10 to 30-fold less antigen than the commercialized trivalent inactivated vaccines Vaxigrip® or Fluviral® induced comparable efficient protection and neutralizing antibody responses against A(H1N1)pdm09 infection. Taken together, our results demonstrate for the first time the use of a calixarene-based detergent as an efficient splitting agent for the production of optimized influenza split antigens, paving the way for significant improvement in the vaccine manufacturing process, notably with regard to the current regulation on the prohibition of endocrine disruptors, such as Triton X-100.

Biochemical and biophysical characterization of purified native CD20 alone and in complex with rituximab and obinutuzumab

CD20 is a B-lymphocyte specific integral membrane protein, an activated-glycosylated phosphoprotein expressed on the surface of B-cells and a clinically validated target of monoclonal antibodies such as rituximab, ocrelizumab, ofatumumab and obinutuzumab in the treatment of all B cell lymphomas and leukemias as well as autoimmune diseases. Here, we report the extraction and purification of native CD20 from SUDHL4 and RAMOS cell lines. To improve the protein yield, we applied a calixarene-based detergent approach to solubilize, stabilize and purify native CD20 from HEK293 cells. Size Exclusion Chromatography (SEC) and Analytical Ultracentrifugation show that purified CD20 was non-aggregated and that CD20 oligomerization is concentration dependent. Negative stain electron microscopy and atomic force microscopy revealed homogenous populations of CD20. However, no defined structure could be observed. Interestingly, micellar solubilized and purified CD20 particles adopt uniformly confined nanodroplets which do not fuse and aggregate. Finally, purified CD20 could bind to rituximab and obinutuzumab as demonstrated by SEC, and Surface Plasmon Resonance (SPR). Specificity of binding was confirmed using CD20 antibody mutants to human B-cell lymphoma cells. The strategy described in this work will help investigate CD20 binding with newly developed antibodies and eventually help to optimize them. This approach may also be applicable to other challenging membrane proteins.

Functional Reconstitution of HlyB, a Type I Secretion ABC Transporter, in Saposin-A Nanoparticles

Type I secretion systems (T1SS) are ubiquitous transport machineries in Gram-negative bacteria. They comprise a relatively simple assembly of three membrane-localised proteins: an inner-membrane complex composed of an ABC transporter and a membrane fusion protein, and a TolC-like outer membrane component. T1SS transport a wide variety of substrates with broad functional diversity. The ABC transporter hemolysin B (HlyB), for example, is part of the hemolysin A-T1SS in Escherichia coli. In contrast to canonical ABC transporters, an accessory domain, a C39 peptidase-like domain (CLD), is located at the N-terminus of HlyB and is essential for secretion. In this study, we have established an optimised purification protocol for HlyB and the subsequent reconstitution employing the saposin-nanoparticle system. We point out the negative influence of free detergent on the basal ATPase activity of HlyB, studied the influence of a lysolipid or lipid matrix on activity and present functional studies with the full-length substrate proHlyA in its folded and unfolded states, which both have a stimulatory effect on the ATPase activity.

A Chemical Strategy for Amphiphile Replacement in Membrane Protein Research

Membrane mimics are indispensable tools in the structural and functional understanding of membrane proteins (MPs). Given stringent requirements of integral MP manipulations, amphiphile replacement is often required in sample preparation for various biophysical purposes. Current protocols generally rely on physical methodologies and rarely reach complete replacement. In comparison, we report herein a chemical alternative that facilitates the exhaustive exchange of membrane-mimicking systems for MP reconstitution. This method, named sacrifice-replacement strategy, was enabled by a class of chemically cleavable detergents (CCDs), derived from the disulfide incorporation in the traditional detergent n-dodecyl-β-d-maltopyranoside. The representative CCD behaved well in both solubilizing the diverse α-helical human G protein-coupled receptors and refolding of the β-barrel bacterial outer membrane protein X, and more importantly, it could also be readily degraded under mild conditions. By this means, the A_2A adenosine receptor was successfully reconstituted into a series of commercial detergents for stabilization screening and nanodiscs for electron microscopy analysis. Featured by the simplicity and compatibility, this CCD-mediated strategy would later find more applications when being integrated in other biophysics studies.

Functionality of membrane proteins overexpressed and purified from E. coli is highly dependent upon the strain

Overexpression of correctly folded membrane proteins is a fundamental prerequisite for functional and structural studies. One of the most commonly used expression systems for the production of membrane proteins is Escherichia coli. While misfolded proteins typically aggregate and form inclusions bodies, membrane proteins that are addressed to the membrane and extractable by detergents are generally assumed to be properly folded. Accordingly, GFP fusion strategy is often used as a fluorescent proxy to monitor their expression and folding quality. Here we investigated the functionality of two different multidrug ABC transporters, the homodimer BmrA from Bacillus subtilis and the heterodimer PatA/PatB from Streptococcus pneumoniae, when produced in several E. coli strains with T7 expression system. Strikingly, while strong expression in the membrane of several strains could be achieved, we observed drastic differences in the functionality of these proteins. Moreover, we observed a general trend in which mild detergents mainly extract the population of active transporters, whereas a harsher detergent like Fos-choline 12 could solubilize transporters irrespective of their functionality. Our results suggest that the amount of T7 RNA polymerase transcripts may indirectly but notably impact the structure and activity of overexpressed membrane proteins, and advise caution when using GFP fusion strategy.

Assemblies of lauryl maltose neopentyl glycol (LMNG) and LMNG-solubilized membrane proteins

Laurylmaltose neopentylglycol (LMNG) bears two linked hydrophobic chains of equal length and two hydrophilic maltoside groups. It arouses a strong interest in the field of membrane protein biochemistry, since it was shown to efficiently solubilize and stabilize membrane proteins often better than the commonly used dodecylmaltopyranoside (DDM), and to allow structure determination of some challenging membrane proteins. However, LMNG was described to form large micelles, which could be unfavorable for structural purposes. We thus investigated its auto-assemblies and the association state of different membrane proteins solubilized in LMNG by analytical ultracentrifugation, size exclusion chromatography coupled to light scattering, centrifugation on sucrose gradient and/or small angle scattering. At high concentrations (in the mM range), LMNG forms long rods, and it stabilized the membrane proteins investigated herein, i.e. a bacterial multidrug transporter, BmrA; a prokaryotic analogous of the eukaryotic NADPH oxidases, SpNOX; an E. coli outer membrane transporter, FhuA; and the halobacterial bacteriorhodopsin, bR. BmrA, in the Apo and the vanadate-inhibited forms showed reduced kinetics of limited proteolysis in LMNG compared to DDM. Both SpNOX and BmrA display an increased specific activity in LMNG compared to DDM. The four proteins form LMNG complexes with their usual quaternary structure and with usual amount of bound detergent. No heterogeneous complexes related to the large micelle size of LMNG alone were observed. In conditions where LMNG forms assemblies of large size, FhuA crystals diffracting to 4.0 Å were obtained by vapor diffusion. LMNG large micelle size thus does not preclude membrane protein homogeneity and crystallization.

Protein sample preparation for solid-state NMR investigations

Preparation of a protein sample for solid-state NMR is in many aspects similar to solution-state NMR approaches, mainly with respect to the need for stable isotope labeling. But the possibility of using solid-state NMR to investigate membrane proteins in (native) lipids adds the important requirement of adapted membrane-reconstitution schemes. Also, dynamic nuclear polarization and paramagnetic NMR in solids need specific schemes using metal ions and radicals. Sample sedimentation has enabled structural investigations of objects inaccessible to other structural techniques, but rotor filling using sedimentation has become increasingly complex with smaller and smaller rotors, as needed for higher and higher magic-angle spinning (MAS) frequencies. Furthermore, solid-state NMR can investigate very large proteins and their complexes without the concomitant increase in line widths, motivating the use of selective labeling and unlabeling strategies, as well as segmental labeling, to decongest spectra. The possibility of investigating sub-milligram amounts of protein today using advanced fast MAS techniques enables alternative protein synthesis schemes such as cell-free expression. Here we review these specific aspects of solid-state NMR sample preparation.

Structural biology and structure–function relationships of membrane proteins

The study of structure–function relationships of membrane proteins (MPs) has been one of the major goals in the field of structural biology. Many Noble Prizes regarding remarkable accomplishments in MP structure determination and biochemistry have been awarded over the last few decades. Mutations or improper folding of these proteins are associated with numerous serious illnesses. Therefore, as important drug targets, the study of their primary sequence and three-dimensional fold, combined with cell-based assays, provides vital information about their structure–function relationships. Today, this information is vital to drug discovery and medicine. In the last two decades, many have been the technical advances and breakthroughs in the field of MP structural biology that have contributed to an exponential growth in the number of unique MP structures in the Protein Data Bank. Nevertheless, given the medical importance and many unanswered questions, it will never be an excess of MP structures, regardless of the method used. Owing to the extension of the field, in this brief review, we will only focus on structure–function relationships of the three most significant pharmaceutical classes: G protein-coupled receptors, ion channels and transporters.

Structure of voltage-dependent anion channel-tethered bilayer lipid membranes determined using neutron reflectivity

Neutron reflectivity (NR) has emerged as a powerful technique to study the structure and behavior of membrane proteins at planar lipid interfaces. Integral membrane proteins (IMPs) remain a significant challenge for NR owing to the difficulty of forming complete bilayers with sufficient protein density for scattering techniques. One strategy to achieve high protein density on a solid substrate is the capture of detergent-stabilized, affinity-tagged IMPs on a nitrilotriacetic acid (NTA)-functionalized self-assembled monolayer (SAM), followed by reconstitution into the lipids of interest. Such protein-tethered bilayer lipid membranes (ptBLMs) have the notable advantage of a uniform IMP orientation on the substrate. Here, NR is used to provide a structural characterization of the ptBLM process from formation of the SAM to capture of the detergent-stabilized IMP and lipid reconstitution. The mitochondrial outer-membrane voltage-dependent anion channel (VDAC), which controls the exchange of bioenergetic metabolites between mitochondria and the cytosol, was used as a model β-barrel IMP. Molecular dynamics simulations were used for comparison with the experimental results and to inform the parameters of the physical models describing the NR data. The detailed structure of the SAM is shown to depend on the density of the NTA chelating groups. The relative content of detergent and protein in surface-immobilized, detergent-stabilized VDAC is measured, while the reconstituted lipid bilayer is shown to be complete to within a few percent, using the known atomic structure of VDAC. Finally, excess lipid above the reconstituted bilayer, which is of consequence for more indirect structural and functional studies, is shown to be present.

Successful amphiphiles as the key to crystallization of membrane proteins: Bridging theory and practice

BACKGROUND

Membrane proteins constitute a major group of proteins and are of great significance as pharmaceutical targets, but underrepresented in the Protein Data Bank. Particular reasons are their low expression yields and the constant need for cautious and diligent handling in a sufficiently stable hydrophobic environment substituting for the native membrane. When it comes to protein crystallization, such an environment is often established by detergents.

SCOPE OF REVIEW

In this review, 475 unique membrane protein X-ray structures from the online data bank "Membrane proteins of known 3D structure" are presented with a focus on the detergents essential for protein crystallization. By systematic analysis of the most successful compounds, including current trends in amphiphile development, we provide general insights for selection and design of detergents for membrane protein crystallization.

MAJOR CONCLUSIONS

The most successful detergents share common features, giving rise to favorable protein interactions. The hydrophile-lipophile balance concept of well-balanced hydrophilic and hydrophobic detergent portions is still the key to successful protein crystallization. Although a single detergent compound is sufficient in most cases, sometimes a suitable mixture of detergents has to be found to alter the resulting protein-detergent complex. Protein crystals with a high diffraction limit involve a tight crystal packing generally favored by detergents with shorter alkyl chains.

GENERAL SIGNIFICANCE

The formation of well-diffracting membrane protein crystals strongly depends on suitable surfactants, usually screened in numerous crystallization trials. The here-presented findings provide basic criteria for the assessment of surfactants within the vast space of potential crystallization conditions for membrane proteins.

The fine art of integral membrane protein crystallisation

Integral membrane proteins are among the most fascinating and important biomolecules as they play a vital role in many biological functions. Knowledge of their atomic structures is fundamental to the understanding of their biochemical function and key in many drug discovery programs. However, over the years, structure determination of integral membrane proteins has proven to be far from trivial, hence they are underrepresented in the protein data bank. Low expression levels, insolubility and instability are just a few of the many hurdles one faces when studying these proteins. X-ray crystallography has been the most used method to determine atomic structures of membrane proteins. However, the production of high quality membrane protein crystals is always very challenging, often seen more as art than a rational experiment. Here we review valuable approaches, methods and techniques to successful membrane protein crystallisation.

X-ray diffraction reveals the intrinsic difference in the physical properties of membrane and soluble proteins

Membrane proteins are distinguished from soluble proteins by their insertion into biological membranes. This insertion is achieved via a noticeable arrangement of hydrophobic amino acids that are exposed at the surface of the protein, and renders the interaction with the aliphatic tails of lipids more energetically favorable. This important difference between these two categories of proteins is the source of the need for a specific handling of membrane proteins, which transpired in the creation of new tools for their recombinant expression, purification and even crystallization. Following this line, we show here that crystals of membrane proteins display systematically higher diffraction anisotropy than those of soluble proteins. This phenomenon dramatically hampers structure solution and refinement, and has a strong impact on the quality of electron-density maps. A farther search for origins of this phenomenon showed that the type of crystallization, and thus the crystal packing, has no impact on anisotropy, nor does the nature or function of the membrane protein. Membrane proteins fully embedded within the membrane display equal anisotropy compared to the ones with extra membranous domains or fusions with soluble proteins. Overall, these results overturn common beliefs and call for a specific handling of their diffraction data.

Gradient reconstitution of membrane proteins for solid-state NMR studies

We here adapted the GRecon method used in electron microscopy studies for membrane protein reconstitution to the needs of solid-state NMR sample preparation. We followed in detail the reconstitution of the ABC transporter BmrA by dialysis as a reference, and established optimal reconstitution conditions using the combined sucrose/cyclodextrin/lipid gradient characterizing GRecon. We established conditions under which quantitative reconstitution of active protein at low lipid-to-protein ratios can be obtained, and also how to upscale these conditions in order to produce adequate amounts for NMR. NMR spectra recorded on a sample produced by GRecon showed a highly similar fingerprint as those recorded previously on samples reconstituted by dialysis. GRecon sample preparation presents a gain in time of nearly an order of magnitude for reconstitution, and shall represent a valuable alternative in solid-state NMR membrane protein sample preparation.

An Overview of the Top Ten Detergents Used for Membrane Protein Crystallization

To study integral membrane proteins, one has to extract them from the membrane—the step that is typically achieved by the application of detergents. In this mini-review, we summarize the top 10 detergents used for the structural analysis of membrane proteins based on the published results. The aim of this study is to provide the reader with an overview of the main properties of available detergents (critical micelle concentration (CMC) value, micelle size, etc.) and provide an idea of what detergents to may merit further study. Furthermore, we briefly discuss alternative solubilization and stabilization agents, such as polymers.

Tandem malonate-based glucosides (TMGs) for membrane protein structural studies

High-resolution membrane protein structures are essential for understanding the molecular basis of diverse biological events and important in drug development. Detergents are usually used to extract these bio-macromolecules from the membranes and maintain them in a soluble and stable state in aqueous solutions for downstream characterization. However, many eukaryotic membrane proteins solubilized in conventional detergents tend to undergo structural degradation, necessitating the development of new amphiphilic agents with enhanced properties. In this study, we designed and synthesized a novel class of glucoside amphiphiles, designated tandem malonate-based glucosides (TMGs). A few TMG agents proved effective at both stabilizing a range of membrane proteins and extracting proteins from the membrane environment. These favourable characteristics, along with synthetic convenience, indicate that these agents have potential in membrane protein research.

Expression in Sf9 insect cells, purification and functional reconstitution of the human proton-coupled folate transporter (PCFT, SLC46A1)

The proton-coupled folate transporter (PCFT) provides an essential uptake route for the vitamin folic acid (B9) in mammals. In addition, it is currently of high interest for targeting chemotherapeutic agents to tumors due to the increased folic acid requirement of rapidly dividing tumor cells as well as the upregulated PCFT expression in several tumors. To understand its function, determination of its atomic structure and molecular mechanism of transport are essential goals that require large amounts of functional PCFT. Here, we present a high-level heterologous expression system for human PCFT using a recombinant baculovirus and Spodoptera frugiperda (Sf9) insect cells. We demonstrate folate transport functionality along the PCFT expression, isolation, and purification process. Importantly, purified PCFT transports folic acid after reconstitution. We thus succeeded in overcoming heterologous expression as a major bottleneck of PCFT research. The availability of an overexpression system for human PCFT provides the basis for future biochemical, biophysical and structural studies.