A cross-functional nanostructured platform based on carbon nanotube-Si hybrid junctions: where photon harvesting meets gas sensing

Application of Two-Dimensional Materials towards CMOS-Integrated Gas Sensors

During the last few decades, the microelectronics industry has actively been investigating the potential for the functional integration of semiconductor-based devices beyond digital logic and memory, which includes RF and analog circuits, biochips, and sensors, on the same chip. In the case of gas sensor integration, it is necessary that future devices can be manufactured using a fabrication technology which is also compatible with the processes applied to digital logic transistors. This will likely involve adopting the mature complementary metal oxide semiconductor (CMOS) fabrication technique or a technique which is compatible with CMOS due to the inherent low costs, scalability, and potential for mass production that this technology provides. While chemiresistive semiconductor metal oxide (SMO) gas sensors have been the principal semiconductor-based gas sensor technology investigated in the past, resulting in their eventual commercialization, they need high-temperature operation to provide sufficient energies for the surface chemical reactions essential for the molecular detection of gases in the ambient. Therefore, the integration of a microheater in a MEMS structure is a requirement, which can be quite complex. This is, therefore, undesirable and room temperature, or at least near-room temperature, solutions are readily being investigated and sought after. Room-temperature SMO operation has been achieved using UV illumination, but this further complicates CMOS integration. Recent studies suggest that two-dimensional (2D) materials may offer a solution to this problem since they have a high likelihood for integration with sophisticated CMOS fabrication while also providing a high sensitivity towards a plethora of gases of interest, even at room temperature. This review discusses many types of promising 2D materials which show high potential for integration as channel materials for digital logic field effect transistors (FETs) as well as chemiresistive and FET-based sensing films, due to the presence of a sufficiently wide band gap. This excludes graphene from this review, while recent achievements in gas sensing with graphene oxide, reduced graphene oxide, transition metal dichalcogenides (TMDs), phosphorene, and MXenes are examined.

Carbon Nanotube Film/Silicon Heterojunction Photodetector for New Cutting-Edge Technological Devices

Photodetector (PD) devices based on carbon nanotube/n-silicon heterojunction (NSH) have been realized, with a linear response in a large optical power range, proving competitive performances with respect to a recent nanostructure-based detector and those currently available on the market. The core of these devices is a thin semi-transparent and conductive single-walled carbon nanotubes film with a multitask role: junction element, light absorber and transmitter, photocarrier transporting layer, and charge collector. The PD exhibits rise times of some nanoseconds, detecting light from ultraviolet (240 nm) to infrared (1600 nm), and external quantum efficiency reaching 300% in the VIS spectra region.

Gas Sensing with Solar Cells: The Case of NH3 Detection through Nanocarbon/Silicon Hybrid Heterojunctions

Photovoltaic (PV) cells based on single-walled carbon nanotube (SWCNT)/silicon (Si) and multiwalled carbon nanotube (MWCNT)/Si junctions were tested under exposure to NH₃ in the 0-21 ppm concentration range. The PV cell parameters remarkably changed upon NH₃ exposure, suggesting that these junctions, while being operated as PV cells, can react to changes in the environment, thereby acting as NH₃ gas sensors. Indeed, by choosing the open-circuit voltage, V_OC, parameter as read-out, it was found that these cells behaved as gas sensors, operating at room temperature with a response higher than chemiresistors developed on the same layers. The sensitivity was further increased when the whole current-voltage (I-V) curve was collected and the maximum power values were tracked upon NH₃ exposure.

Dramatic efficiency boost of single-walled carbon nanotube-silicon hybrid solar cells through exposure to ppm nitrogen dioxide in air: An ab-initio assessment of the measured device performances

We observed a 73% enhancement of the power conversion efficiency (PCE) of a photovoltaic cell based on a single wall carbon nanotube/Si hybrid junction after exposing the device to a limited amount (10 ppm) of NO₂ diluted in dry air. On the basis of a computational modeling of the junction, this enhancement is discussed in terms of both carbon nanotube (CNT) p-doping, induced by the interaction with the oxidizing molecules, and work function changes across the junction. Unlike studies so far reported, where the PCE enhancement was correlated only qualitatively to CNT doping, our study (i) provides a novel and reversible path to tune and considerably enhance the cell efficiency by a few ppm gas exposure, and (ii) shows computational results that quantitatively relate the observed effects to the electrostatics of the cell through a systematic calculation of the work function. These effects have been cross-checked by exposing the cell to reducing molecules (i.e·NH₃) that resulted to be detrimental to the cell efficiency, consistently with the theoretical ab-initio calculations.

Enhanced selectivity of target gas molecules through a minimal array of gas sensors based on nanoparticle-decorated SWCNTs

Layers of CNTs decorated with metal and metal–oxide nanoparticles can be used to develop highly selective gas sensor arrays.