Direct simultaneous analysis of plasma samples for a drug discovery compound and its hydroxyl metabolite using mixed-function column liquid chromatography-tandem mass spectrometry

Supercritical Fluid Chromatography and High-Performance Liquid Chromatography/Tandem Mass Spectrometric Methods for the Determination of Cytarabine in Mouse Plasma

The separation of cytarabine (ara-C) from the endogenous compounds in mouse plasma by packed-column supercritical fluid chromatography (pSFC) was achieved on bare silica stationary phase with an isocratic mobile phase composed of CO2/methanol solvent with addition of ammonium acetate. SFC is commonly assumed to be only applicable to nonpolar and relatively low-polarity compounds. In this work, a broader range of compound polarities amenable to pSFC with appropriate mobile-phase modifiers and additives under normal-phase retention mechanism was demonstrated. The pSFC was integrated with an atmospheric pressure chemical ionization source and a tandem mass spectrometer (MS/MS) to enhance the sensitivity, selectivity, and speed of the assay. The influence of mobile-phase components on chromatographic performance and ionization efficiency of the test compounds was investigated for improving the sensitivity and separation for the analyte and the internal standard. The pSFC-MS/MS approach requiring approximately 2.5 min/sample for the determination of ara-C at nanograms per milliliter in mouse plasma was partially validated with respect to stability, linearity, and reproducibility. The mouse plasma levels of ara-C obtained by the pSFC-MS/MS method were found to be consistent with those determined by various reversed-phase, high-performance liquid chromatography methods using a porous graphite carbon column, a mixed-mode column, or a C18 column in conjunction with an ion-pairing agent coupled to a tandem mass spectrometer.

Stabilizing Drug Molecules in Biological Samples

Stability is one of the basic parameters, along with accuracy, precision, selectivity, and sensitivity, for bioanalytic method validation in nonhuman and clinical pharmacology/toxicology, bioavailability (BA), bioequivalence (BE), and other studies related to the drug approval process. In the drug development stage where stability evaluation is obligatory, instability of drug candidates in biologic samples will seriously complicate assay validation. In this article, we review the general strategies and methodologies such as temperature adjustment, pH control, derivatization, and addition of inhibitors and oxidant that are commonly employed to stabilize pharmaceuticals that might be unstable in biologic samples.

A novel on-line solid-phase extraction approach integrated with a monolithic column and tandem mass spectrometry for direct plasma analysis of multiple drugs and metabolites

An on-line solid-phase extraction liquid chromatography/tandem mass spectrometry (SPE LC/MS/MS) assay using a newly developed SPE column and a monolithic column was developed and validated for direct analysis of plasma samples containing multiple analytes. This assay was developed in an effort to increase bioanalysis throughput and reduce the complexity of on-line SPE LC/MS/MS systems. A simple column-switching configuration that requires only one six-port valve and one HPLC pumping system was employed for on-line plasma sample preparation and subsequent gradient chromatographic separation. The resulting analytical method couples the desired sensitivity with ease of use. The method was found to perform satisfactorily for direct plasma analysis with respect to assay linearity, specificity, sensitivity, precision, accuracy, carryover, and short-term stability of an eight-analyte mixture in plasma. A gradient LC condition was applied to separate the eight analytes that cannot be distinctly differentiated by MS/MS. With a run time for every injection of 2.8 min, a minimum of 300 direct plasma injections were made on one on-line SPE column without noticeable changes in system performance. Due to the ruggedness and simplicity of this system, generic methods can be easily developed and applied to analyze a wide variety of compounds in a high-throughput manner without laborious off-line sample preparation.

Direct plasma analysis of drug compounds using monolithic column liquid chromatography and tandem mass spectrometry

A monolithic silica column high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method has been developed for the high-speed direct simultaneous determination of a drug discovery compound and its major circulating metabolite (M-72) in rat plasma. This methodology makes use of flow programming and an alkyl-bonded silica rod column for fast macromolecule removal and chromatographic separation without the need for significant sample preparation. The matrix ionization suppression effect on the monolithic column HPLC-MS/MS system was investigated using the postcolumn infusion technique. After 200 plasma injections on a 50 x 4.6 mm monolithic silica column, consistent column efficiency of close to 39,000 theoretical plates/m and reproducible retention times for the analytes were observed. The apparent on-column recoveries of 12 test compounds in rat plasma samples were greater than 90%. The proposed fast direct plasma injection method was tested over a 3-day period with the interday coefficient of variation less than 15% for both analytes.

Development of a method for the direct analysis of peptide AM336 in monkey cerebrospinal fluid using liquid chromatography/electrospray ionization mass spectrometry with a mixed-function column

A liquid chromatography/mass spectrometry (LC/MS) analytical procedure, using a single column for sample clean-up, enrichment and separation, has been developed for the determination of the peptide AM336 in monkey cerebrospinal fluid (CSF). CSF samples were injected and analyzed using a polymer-coated mixed-function high-performance liquid chromatography (HPLC) column with gradient elution and application of a timed valve-switching event. The mass spectrometer was operated in the positive electrospray ionization (ESI(+)) mode with single ion recording (SIR) at m/z 920. The method was validated, yielding calibration curves with correlation coefficients greater than 0.9892. Assay precision and accuracy were evaluated by direct injection of AM336-fortified CSF samples at three concentration levels. Analyzed concentrations ranged from 99.93 to 113.1% of their respective theoretical concentrations with coefficients of variation below 9.0%. An evaluation of the signal-to-noise (S/N) ratio for a 200 ng/mL calibration standard, considered to be the lower limit of quantitation (LLOQ), resulted in an estimated limit of detection (LOD) of 31.2 ng/mL. Preliminary data suggest the possibility of using this method to analyze AM336 also in plasma samples, pending the successful outcome of additional investigations.

Semi-automated determination of plasma stability of drug discovery compounds using liquid chromatography-tandem mass spectrometry

A simple procedure for the measurement of stability of drug candidates in plasma was developed to eliminate the traditional labor-intensive and time-consuming sample preparation procedures that are typically used for these studies. The procedure makes use of a thermostatic autosampler as an incubator combined with the direct plasma injection method based on high-performance liquid chromatography (HPLC) coupled to tandem mass spectrometry (MS-MS). Untreated human, monkey, mouse and rat plasma containing the test compound was directly injected into a mixed-function column for on-line protein removal and chromatography. The test compound and its biotransformation product were separated via HPLC and monitored using the tandem mass spectrometer. The need for adequate chromatographic separation of the test compound (M) from its carboxylic acid metabolite (M+1) is demonstrated. Plasma samples from four different species at specified incubation temperatures were sequentially assayed in one analytical procedure. The injection-to-injection time was about 6 min. The peak responses of the test compound in individual plasma samples were repeatedly determined every 24 min. The retention times and peak shape of all analytes were found to be consistent throughout the experiments. The stability of the test compound in plasma was found to be a function of animal species, incubation time and temperature. The test compound was rapidly degraded in rat plasma at 37 degrees C, but it could be stabilized by adding sodium thiosulfate.

Direct cocktail analysis of drug discovery compounds in pooled plasma samples using liquid chromatography-tandem mass spectrometry

Direct plasma injection technology coupled with a LC-MS/MS assay provides fast and straightforward method development and greatly reduces the time for the tedious sample preparation procedures. In this work, a simple and sensitive bioanalytical method based on direct plasma injection using a single column high-performance liquid chromatography (HPLC) and tandem mass spectrometry (MS/MS) was developed for direct cocktail analysis of double-pooled mouse plasma samples for the quantitative determination of small molecules. The overall goal was to improve the throughput of the rapid pharmacokinetic (PK) screening process for early drug discovery candidates. Each pooled plasma sample was diluted with working solution containing internal standard and then directly injected into a polymer-coated mixed-function column for sample clean-up, enrichment and chromatographic separation. The apparent on-column recovery of six drug candidates in mouse plasma samples was greater than 90%. The single HPLC column was linked to either an atmospheric pressure chemical ionization (APCI) or electrospray ionization (ESI) source as a part of MS/MS system. The total run cycle time using single column direct injection methods can be achieved within 4 min per sample. The analytical results obtained by the described direct injection methods were comparable with those obtained by semi-automated protein precipitation methods within +/- 15%. The advantages and challenges of using direct single column LC-MS/MS methods with two ionization sources in combination of sample pooling technique are discussed.