Unravelling electron transfer in peptide-cation complexes: a model for mimicking redox centres in proteins

We provide evidence that bound zinc promotes electron transfer in a peptide by changing the electronic properties of the peptide.

Capping β-hairpin with N-terminal d-amino acid stabilizes peptide scaffold

Various strategies exist to stabilize de novo designed synthetic peptide β-hairpins or β-sheets structures, especially at the non-hydrogen bonding position. However, strategies to stabilize strand termini, which are affected by fraying, are highly limited. Here, by substituting N-terminal aliphatic amino acid with its mirror image counterpart, we achieve a significant increase in scaffold stabilization, resulting from the formation of a terminal aliphatic-aromatic hydrophobic CH…pi cluster. Our extensive solution NMR studies support the incorporation of an N-terminal d-aliphatic amino acid in the design of short β-hairpins, while successfully retaining the overall structural scaffold. © 2016 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 260-266, 2016.

Automated protein design: Landmarks and operational principles

Protein design has an eventful history spanning over three decades, with handful of success stories reported, and numerous failures not reported. Design practices have benefited tremendously from improvements in computer hardware and advances in scientific algorithms. Though protein folding problem still remains unsolved, the possibility of having multiple sequence solutions for a single fold makes protein design a more tractable problem than protein folding. One of the most significant advancement in this area is the implementation of automated design algorithms on pre-defined templates or completely new folds, optimized through deterministic and heuristic search algorithms. This progress report provides a succinct presentation of important landmarks in automated design attempts, followed by brief account of operational principles in automated design methods.

Stabilizing effect of electrostatic vs. aromatic interactions in diproline nucleated peptide β-hairpins

The contribution of Tyr-His vs. Cys-His interacting pairs to the scaffold stability of (D)Pro-(L)Pro nucleated peptide β-hairpins has been examined. We present direct evidence for the superiority of the Cys-His pairs, mediated by sulphur-imidazole interactions, as added stabilizing agents of the β-hairpin scaffold.

Design of monomeric water-soluble β-hairpin and β-sheet peptides

Since the first report in 1993 (JACS 115, 5887-5888) of a peptide able to form a monomeric β-hairpin structure in aqueous solution, the design of peptides forming either β-hairpins (two-stranded antiparallel β-sheets) or three-stranded antiparallel β-sheets has become a field of growing interest and activity. These studies have yielded great insights into the principles governing the stability and folding of β-hairpins and antiparallel β-sheets. This chapter provides an overview of the reported β-hairpin/β-sheet peptides focussed on the applied design criteria, reviews briefly the factors contributing to β-hairpin/β-sheet stability, and describes a protocol for the de novo design of β-sheet-forming peptides based on them. Guidelines to select appropriate turn and strand residues and to avoid self-association are provided. The methods employed to check the success of new designed peptides are also summarized. Since NMR is the best technique to that end, NOEs and chemical shifts characteristic of β-hairpins and three-stranded antiparallel β-sheets are given.

De novo design of peptide scaffolds as novel preorganized ligands for metal-ion coordination

This chapter describes how de novo designed peptides can be used as novel preorganized ligands for metal ion coordination. The focus is on the design of peptides which are programmed to spontaneously self-assemble into α-helical coiled coils in aqueous solution, and how metal ion binding sites can be engineered onto and into these structures. In addition to describing the various design principles, some key examples are covered illustrating the success of this approach, including a more detailed example in the case study.

Designing functional metalloproteins: from structural to catalytic metal sites

Metalloenzymes efficiently catalyze some of the most important and difficult reactions in nature. For many years, coordination chemists have effectively used small molecule models to understand these systems. More recently, protein design has been shown to be an effective approach for mimicking metal coordination environments. Since the first designed proteins were reported, much success has been seen for incorporating metal sites into proteins and attaining the desired coordination environment but until recently, this has been with a lack of significant catalytic activity. Now there are examples of designed metalloproteins that, although not yet reaching the activity of native enzymes, are considerably closer. In this review, we highlight work leading up to the design of a small metalloprotein containing two metal sites, one for structural stability (HgS3) and the other a separate catalytic zinc site to mimic carbonic anhydrase activity (ZnN3O). The first section will describe previous studies that allowed for a high affinity thiolate site that binds heavy metals in a way that stabilizes three-stranded coiled coils. The second section will examine ways of preparing histidine rich environments that lead to metal based hydrolytic catalysts. We will also discuss other recent examples of the design of structural metal sites and functional metalloenzymes. Our work demonstrates that attaining the proper first coordination geometry of a metal site can lead to a significant fraction of catalytic activity, apparently independent of the type of secondary structure of the surrounding protein environment. We are now in a position to begin to meet the challenge of building a metalloenzyme systematically from the bottom-up by engineering and analyzing interactions directly around the metal site and beyond.

Natural and artificial proteins containing cadmium

This chapter describes an approach using designed proteins to understand the structure, spectroscopy, and dynamics of proteins that bind Cd(II). We will show that three-stranded coiled coils (3SCCs) based on the parent peptides TRI (Ac-G(LKALEEK)(4)G-NH(2)) or GRAND (Ac-G(LKALEEK)(5)G-NH(2)) have been essential for understanding how Cd(II) binds to thiolate-rich environments in proteins. Examples are given correlating physical properties such as the binding constants or deprotonation constants relating to structure. We present a scale that relates (113)Cd NMR chemical shifts to structures extracted from (111m)Cd PAC experiments. In addition, we describe motional processes that help transport from the helical interface of proteins into the hydrophobic interior of helical bundles. These studies help clarify the chemistry of Cd(II) in relation to metal-regulated gene expression and detoxification.

Structural comparisons of apo- and metalated three-stranded coiled coils clarify metal binding determinants in thiolate containing designed peptides

Over the past two decades, designed metallopeptides have held the promise for understanding a variety of fundamental questions in metallobiochemistry; however, these dreams have not yet been realized because of a lack of structural data to elaborate the protein scaffolds before metal complexation and the resultant metalated structures which ultimately exist. This is because there are few reports of structural characterization of such systems either in their metalated or nonmetalated forms and no examples where an apo structure and the corresponding metalated peptide assembly have both been defined by X-ray crystallography. Herein we present X-ray structures of two de novo designed parallel three-stranded coiled coils (designed using the heptad repeat (a → g)) CSL9C (CS = Coil Ser) and CSL19C in their nonmetalated forms, determined to 1.36 and 2.15 A resolutions, respectively. Leucines from either position 9 (a site) or 19 (d site) are replaced by cysteine to generate the constructs CSL9C and CSL19C, respectively, yielding thiol-rich pockets at the hydrophobic interior of these peptides, suitable to bind heavy metals such as As(III), Hg(II), Cd(II), and Pb(II). We use these structures to understand the inherent structural differences between a and d sites to clarify the basis of the observed differential spectroscopic behavior of metal binding in these types of peptides. Cys side chains of (CSL9C)(3) show alternate conformations and are partially preorganized for metal binding, whereas cysteines in (CSL19C)(3) are present as a single conformer. Zn(II) ions, which do not coordinate or influence Cys residues at the designed metal sites but are essential for forming X-ray quality crystals, are bound to His and Glu residues at the crystal packing interfaces of both structures. These "apo" structures are used to clarify the changes in metal site organization between metalated As(CSL9C)(3) and to speculate on the differential basis of Hg(II) binding in a versus d peptides. Thus, for the first time, one can establish general rules for heavy metal binding to Cys-rich sites in designed proteins which may provide insight for understanding how heavy metals bind to metallochaperones or metalloregulatory proteins.

Design of thiolate rich metal binding sites within a peptidic framework

A de novo protein design strategy provides a powerful tool to elucidate how heavy metals interact with proteins.Cysteine derivatives of the TRI peptide family (Ac-G(LKALEEK)4G-NH2) have been shown to bind heavy metals in an unusual trigonal geometry. Our present objective was to design binding sites in R-helical scaffolds that are able to form higher coordination number complexes with Cd(II) and Hg(II). Herein, we evaluate the binding of Cd(II) and Hg(II) to double cysteine substituted TRI peptides lacking intervening leucines between sulfurs in the heptads. We compare a -Cysd-X-X-X-Cysa- binding motif found in TRIL12CL16C to the more common -Cysa-X-X-Cysd- sequence of native proteins found in TRIL9CL12C. Compared to TRI, these substitutions destabilize the helical aggregates,leading to mixtures of two- and three-stranded bundles. The three-stranded coiled coils are stabilized by the addition of metals. TRIL9CL12C forms distorted tetrahedral complexes with both Cd(II) and Hg(II), as supported by UV-vis,CD, 113Cd NMR, 199Hg NMR and 111mCd PAC spectroscopy. Additionally, these signatures are very similar to those found for heavy metal substituted rubredoxin. These results suggest that in terms of Hg(II) binding, TRIL9CL12Ccan be considered as a good mimic of the metallochaperone HAH1, that has previously been shown to form protein dimers. TRIL12CL16C has limited ability to generate homoleptic tetrahedral complexes (Cd(SR)42-). These type of complexes were identified only for Hg(II). However, the spectroscopic signatures suggest a different geometry around the metal ion, demonstrating that effective metal sequestration into the hydrophobic interior of the bundle requires more than simply adding two sulfur residues in adjacent layers of the peptide core. Thus, proper design of metal binding sites must also consider the orientation of cysteine sidechains in a vs d positions of the heptads.

Hybrid Peptides: Expanding the β Turn in Peptide Hairpins by the Insertion of β-, γ-, and δ-Residues

The beta turn segment in designed peptide hairpins has been expanded by the insertion of beta-, gamma- and delta-amino acids at the i+2 position. The model octapeptides Boc-Leu-Phe-Val-DPro-Ac6c-Leu-Phe-Val-OMe (1), Boc-Leu-Phe-Val-DPro-beta3-Ac6c-Leu-Phe-Val-OMe (2), and Boc-Leu-Phe-Val-DPro-Gpn-Leu-Phe-Val-OMe (3) have been shown to adopt beta hairpin conformations in methanol by the observation of key diagnostic nuclear Overhauser effects. Boc-Leu-Val-Val-DPro-delta-Ava-Leu-Val-Val-OMe (4) adopts a beta hairpin conformation in crystals; this is stabilized by three cross-strand hydrogen bonds as demonstrated by X-ray diffraction. The canonical C10 turn in an alpha-alpha segment is expanded to C11, C12, and C13 turns in alpha-beta, alpha-gamma, and alpha-delta segments, respectively. The crystal structures of Piv-LPro-beta3-Ac6c-NHMe (5) and Boc-Ac6c-Gpn-Ac6c-OMe (6) reveal intramolecularly hydrogen-bonded C11 and C12 conformations, respectively. Computer modeling of octapeptide sequences that contain centrally positioned hybrid-turn segments, by using turn parameters derived from the structures of peptides 5 and 6, establishes the stereochemical acceptability of the beta hairpins in the cases of peptides 2 and 3. Accommodation of omega-amino acids into the turn segments is achieved by the adoption of gauche conformations around the backbone C--C bonds.

Tuning the beta-turn segment in designed peptide beta-hairpins: construction of a stable type I' beta-turn nucleus and hairpin-helix transition promoting segments

Designed octapeptides Boc-Leu-Val-Val-Aib-(D)Xxx-Leu-Val-Val-OMe ((D)Xxx = (D)Ala, 3a;(D)Val, 3c and (D)Pro, 5a) and Boc-Leu-Phe-Val-Aib-(D)Ala-Leu-Phe-Val-OMe (3b) have been investigated to construct models of a stable type I' beta-turn nucleated hairpin and to generate systems for investigating helix-hairpin conformational transitions. Peptide 5a, which contains a central Aib-(D)Pro segment, is shown to adopt a stable type I' beta-turn nucleated hairpin structure, stabilized by four cross-strand hydrogen bonds. The stability of the structure in diverse solvents is established by the observation of all diagnostic NOEs expected in a beta-hairpin conformation. Replacement of (D)Pro5 by (D)Ala/(D)Val (3a-c) results in sequences that form beta-hairpins in hydrogen bonding solvents like CD(3)OH and DMSO-d(6). However, in CDCl(3) evidence for population of helical conformations is obtained. Peptide 6b (Boc-Leu-Phe-Val-Aib-Aib-Leu-Phe-Val-OMe), which contains a centrally positioned Aib-Aib segment, provides a clear example of a system, which exhibits a helical conformation in CDCl(3) and a significant population of both helices and hairpins in CD(3)OH and DMSO-d(6). The coexistence of multiple conformations is established by the simultaneous observation of diagnostic NOEs. Control over stereochemistry of the central beta-turn permits generation of models for robust beta-hairpins and also for the construction of systems that may be used to probe helix-hairpin conformational transitions.