Internally-referenced resonant mirror for chemical and biochemical sensing

Spatial resolution in prism-based surface plasmon resonance microscopy

Several optical surface sensing techniques, such as Surface Plasmon Resonance (SPR), work by imaging the base of a prism by one of its faces. However, such a fundamental optical concern has not been fully analyzed and understood so far, and spatial resolution remains a critical and controversial issue. In SPR, the propagation length L(x) of the surface plasmon waves has been considered as the limiting factor. Here, we demonstrate that for unoptimized systems geometrical aberrations caused by the prism can be more limiting than the propagation length. By combining line-scan imaging mode with optimized prisms, we access the ultimate lateral resolution which is diffraction-limited by the object light diffusion. We describe several optimized configurations in water and discuss the trade-off between L(x) and sensitivity. The improvement of resolution is confirmed by imaging micro-structured PDMS stamps and individual living eukaryote cells and bacteria on field-of-view from 0.1 to 20 mm(2).

Label-free detection with the resonant mirror biosensor

The resonant mirror (RM) biosensor is a leaky waveguide-based instrument that uses the evanescent field to probe changes in the refractive index at the sensing surface.The RM can therefore be used to monitor in real-time and label-free the interaction between an analyte in solution and its biospecific partner immobilized on the waveguide surface.The RM has been used in studying the interaction of a variety of moieties including proteins, carbohydrates, cells, nucleic acids and receptors, leading to applications in areas such as clinical diagnostics, homeland security, and pharmaceutical and biomolecular interactions. This chapter will review the principle of this biosensor, and the recent advances in instrumentation, different immobilization chemistries, and kinetic studies, as well as some applications.

Self-referencing a single waveguide grating sensor in a micron-sized deep flow chamber for label-free biomolecular binding assays

In order to allow the design of increasingly sensitive label-free biosensors, compensation of environmental fluctuations is emerging as the dominant hurdle. The system and technique presented here utilize a unique combination of microfluidics, optical instrumentation, and image processing to provide a reference signal for each label-free biomolecular binding assay. Moreover, this reference signal is generated from the same sensor used to detect the biomolecular binding events. In this manner, the reference signal and the binding signal share nearly all common-mode noise sources (temperature, pressure, vibration, etc.) and their subtraction leaves the purest binding signal possible. Computational fluid dynamic simulations have been used to validate the flow behavior and thermal characteristics of the fluids inside the sensing region. This system has been demonstrated in simple bulk refractive index tests, as well as small molecule (biotin/streptavidin) binding experiments. The ability to perform not only simple binding but also control experiments has been discussed, indicating the wide applicability of the technique.

An integrated disposable dye clad leaky waveguide sensor for micro-TAS applications

An integrated, disposable, dye clad leaky waveguide (DCLW) device has been fabricated and tested for both refractive index and fluorescence detection in mu-TAS applications. The chip comprises the required flow geometry and optical coupling elements in a robust device that is relatively simple and inexpensive to fabricate. Disposable DCLW chips were fabricated at room temperature by spin-coating both the dye and silica sol-gel waveguiding layers on a polymer substrate which contained injection moulded grating coupler. These devices have been designed to increase the interaction of the evanescent field light at the channel wall and with the sample in the channel. The DCLW device has been used to detect changes in the refractive index of different percentages of glycerol solutions and to detect low concentrations down to 10(-12) M fluorescein using a grating coupler.