Interaction mechanism between low molecular weight chitosan nanofilm and functionalized surfaces in aqueous solutions

Low-molecular-weight chitosan (LMW chitosan, <10 kDa) have a significant potential for biomedical applications (e.g., antimicrobial and gene/drug delivery) because of their higher water solubility at pH values ranging from 3.0 to 8.5, compared to that of the high-molecular-weight (>100 kDa) chitosan. A comprehensive understanding of the LMW interaction mechanism with specific functional groups is necessary to predict their binding efficiency to other molecules for effectively utilizing their potential within biological systems. In this study, we used a surface forces apparatus (SFA) to investigate molecular interactions between LMW chitosan and four different functionalized self-assembled monolayers (SAMs) in aqueous solutions at pH values of 3.0, 6.5, and 8.5. Chitosan exhibited the strongest interaction energy with methyl-terminated SAM (CH3-SAM), indicating the significance of hydrophobic interaction. Many chitin/chitosan fibers in nature bind polyphenols (e.g., eumelanin) to form robust composites, which can be attributed to the strong attraction between chitosan and phenyl-SAM, presumably caused by cation-π interactions. These findings demonstrate the potential of modulating the magnitude of the interaction energy by controlling the solution pH and types of targeted functional groups to realize the optimal design of chitosan-based hybrid composites with other biomolecules or synthetic materials.

Enhanced Gas Adsorption in HKUST-1@Chitosan Aerogels, Cryogels, and Xerogels: An Evaluation Study

This study investigates the use of chitosan hydrogel microspheres as a template for growing an extended network of MOF-type HKUST-1. Different drying methods (supercritical CO2, freeze-drying, and vacuum drying) were used to generate three-dimensional polysaccharide nanofibrils embedding MOF nanoclusters. The resulting HKUST-1@Chitosan beads exhibit uniform and stable loadings of HKUST-1 and were used for the adsorption of CO2, CH4, Xe, and Kr. The maximum adsorption capacity of CO2 was found to be 1.98 mmol·g-1 at 298 K and 1 bar, which is significantly higher than those of most MOF-based composite materials. Based on Henry's constants, thus-prepared HKUST-1@CS beads also exhibit fair selectivity for CO2 over CH4 and Xe over Kr, making them promising candidates for capture and separation applications.

Promotional Effects on the Catalytic Activity of Co-Fe Alloy Supported on Graphitic Carbon for CO2 Hydrogenation

Starting from the reported activity of Co-Fe nanoparticles wrapped onto graphitic carbon (Co-Fe@C) as CO₂ hydrogenation catalysts, the present article studies the influence of a series of metallic (Pd, Ce, Ca, Ca, and Ce) and non-metallic (S in various percentages and S and alkali metals) elements as Co-Fe@C promoters. Pd at 0.5 wt % somewhat enhances CO₂ conversion and CH₄ selectivity, probably due to H₂ activation and spillover on Co-Fe. At similar concentrations, Ce does not influence CO₂ conversion but does diminish CO selectivity. A 25 wt % Fe excess increases the Fe-Co particle size and has a detrimental effect due to this large particle size. The presence of 25 wt % of Ca increases the CO₂ conversion and CH₄ selectivity remarkably, the effect being attributable to the CO₂ adsorption capacity and basicity of Ca. Sulfur at a concentration of 2.1% or higher acts as a strong poison, decreasing CO₂ conversion and shifting selectivity to CO. The combination of S and alkali metals as promoters maintain the CO selectivity of S but notably increase the CO₂ conversion. Overall, this study shows how promoters and poisons can alter the catalytic activity of Co/Fe@C catalysts, changing from CH₄ to CO. It is expected that further modulation of the activity of Co/Fe@C catalysts can serve to drive the activity and selectivity of these materials to any CO₂ hydrogenation products that are wanted.

Synthesis and Applications of Carbohydrate-Based Organocatalysts

Organocatalysis is a very useful tool for the asymmetric synthesis of biologically or pharmacologically active compounds because it avoids the use of noxious metals, which are difficult to eliminate from the target products. Moreover, in many cases, the organocatalysed reactions can be performed in benign solvents and do not require anhydrous conditions. It is well-known that most of the above-mentioned reactions are promoted by a simple aminoacid, l-proline, or, to a lesser extent, by the more complex cinchona alkaloids. However, during the past three decades, other enantiopure natural compounds, the carbohydrates, have been employed as organocatalysts. In the present exhaustive review, the detailed preparation of all the sugar-based organocatalysts as well as their catalytic properties are described.

Co-Fe Nanoparticles Wrapped on N-Doped Graphitic Carbons as Highly Selective CO2 Methanation Catalysts

Pyrolysis of chitosan containing various loadings of Co and Fe renders Co-Fe alloy nanoparticles supported on N-doped graphitic carbon. Transmission electron microscopy (TEM) images show that the surface of Co-Fe NPs is partially covered by three or four graphene layers. These Co-Fe@(N)C samples catalyze the Sabatier CO₂ hydrogenation, increasing the activity and CH₄ selectivity with the reaction temperature in the range of 300-500 °C. Under optimal conditions, a CH₄ selectivity of 91% at an 87% CO₂ conversion was reached at 500 °C and a space velocity of 75 h^-1 under 10 bar. The Co-Fe alloy nanoparticles supported on N-doped graphitic carbon are remarkably stable and behave differently as an analogous Co-Fe catalyst supported on TiO₂.

Valorization of Waste: Sustainable Organocatalysts from Renewable Resources

One of the greatest challenges facing our society is to reconcile our need to develop efficient and sophisticated chemical processes with the limited resources of our planet and its restricted ability to adsorb pollution. Organocatalysis has allowed many issues to be addressed in the development of sophisticated, but less polluting, processes. However, minimizing waste also means an efficient utilization of raw and renewable materials. Waste biomass represents an alternative to conventional petroleum-based chemical manufacturing and is a highly attractive renewable resource for the production of chemicals and high-value-added organocatalysts. Recent achievements in the use of renewable biomass feedstocks for the synthesis of organocatalysts are presented. Their application in synthetic methodologies, including multicomponent reactions, which are performed under solvent-free conditions or in eco-friendly reaction media, as well as recycling and reusing the organocatalysts, is illustrated. A few pioneering examples that demonstrate the potential of these promoters in asymmetric synthesis have also been documented. In particular, this review covers examples on the use of hetero- and homogeneous organocatalysts derived from 1) waste biopolymers, such as chitosan, alginic acid, and cellulose; ii) renewable platform molecules, such as levoglucosenone, isosorbide, mannose, d-glucosamine, and lecithin; 3) terpenes and rosin, such as pinane, isosteviol, and abietic acid; and iv) natural proteins (gelatin, bovine tendons, silk fibroin proteins).

Palladium Supported on Porous Chitosan-Graphene Oxide Aerogels as Highly Efficient Catalysts for Hydrogen Generation from Formate

Adsorption of Pd(NH₃)₄²⁺ in preformed chitosan–graphene oxide (CS-GO) beads and their subsequent reduction with NaBH₄ afford well-dispersed, high dispersion (~21%) of uniformly sized Pd nanoparticles (~1.7 nm). The resulting Pd/CS-GO exhibits interesting catalytic activity for hydrogen generation by ammonium formate decomposition. The optimal GO proportion of 7 wt% allows reaching, at 60 °C, a turnover frequency above 2200 h⁻¹—being outstanding among the highest values reported for this process to date. Interestingly, no formation of CO or CH₄ was detected. The catalyst did not leach, although it underwent gradual deactivation, probably caused by the increase in the Pd average size that became over 3 nm after three uses. Our results are relevant in the context of efficient on-board hydrogen generation from liquid organic hydrogen carriers in transportation.

Assessment of Chitosan Based Catalyst and their Mode of Action

Introduction:

The popularity of chitosan is increasing among the researchers due to its environment friendly nature, high activity and easy approachability. Chitosan based catalysts are not only the most active and selective in catalytic reaction, but their “green” accessibility also makes them promising in organic catalysis. Chitosan is commonly extracted from chitin by alkaline deacetylation and it is the second abundant biopolymer in nature after cellulose. Chitosan based catalysts are advantageous by means of non-metallic activation as it involves small organic molecules. The robustness, nontoxicity, the lack of metal leaching possibility, inertness towards moisture and oxygen, easy handling and storage are the main advantages of organocatalysts. Traditional drawbacks associated with the metal-based heterogeneous catalysts, like longer reaction times during any synthesis, metal-leaching after every reaction and structural instability of the catalyst for prolonged recycling experiments are also very negligible for chitosan based catalysts. Besides, these catalysts can contribute more in catalysis due to their reusability and these special features increase their demand as the functionalized and profitable catalysts.

Objective:

The thorough description about the preparation of organocatalysts from chitosan and their uniqueness and novel activities in various famous reactions includes as the main aim of this review. Reusable and recycle nature of chitosan based organocatalysts gain the advantages over traditional and conventional catalyst which is further discussed over here.

Methods and Discussions:

In this article only those reactions are discussed where chitosan has been used both as support in heterogeneous catalysts or used as a catalyst itself without any co-catalyst for some reactions. Owing to its high biodegradability, nontoxicity, and antimicrobial properties, chitosan is widely-used as a green and sustainable polymeric catalyst in vast number of the reactions. Most of the preparations of catalyst have been achieved by exploring the complexation properties of chitosan with metal ions in heterogeneous molecular catalysis. Organocatalysis with chitosan is primarily discussed for carbon-carbon bond-forming reactions, carbon dioxide fixation through cyclo- addition reaction, condensation reaction and fine chemical synthesis reactions. Furthermore, its application as an enantioselective catalyst is also considered here for the chiral, helical organization of the chitosan skeleton. Moreover, another advantage of this polymeric catalyst is its easy recovery and reusability for several times under solvent-free conditions which is also explored in the current article.

Conclusion:

Important organocatalyzed reactions with either native chitosan or functionalized chitosan as catalysts have attracted great attention in the recent past. Also, chitosan has been widely used as a very promising support for the immobilization of catalytic metals for many reactions. In this review, various reactions have been discussed which show the potentiality of chitosan as catalyst or catalyst support.

Review on the Production of Polysaccharide Aerogel Particles

A detailed study of the production of polysaccharide aerogel (bio-aerogel) particles from lab to pilot scale is surveyed in this article. An introduction to various droplets techniques available in the market is given and compared with the lab scale production of droplets using pipettes and syringes. An overview of the mechanisms of gelation of polysaccharide solutions together with non-solvent induced phase separation option is then discussed in the view of making wet particles. The main steps of particle recovery and solvent exchange are briefly described in order to pass through the final drying process. Various drying processes are overviewed and the importance of supercritical drying is highlighted. In addition, we present the characterization techniques to analyse the morphology and properties of the aerogels. The case studies of bio-aerogel (agar, alginate, cellulose, chitin, κ-carrageenan, pectin and starch) particles are reviewed. Potential applications of polysaccharide aerogel particles are briefly given. Finally, the conclusions summarize the prospects of the potential scale-up methods for producing bio-aerogel particles.

Supercritical CO2dried chitosan nanoparticles: production and characterization

Preparation and characteristics of dry nanoparticles of chitosan with large surface area and efficiently resuspended in acidified water.

Sorption of Cu(II) Ions on Chitosan-Zeolite X Composites: Impact of Gelling and Drying Conditions

Chitosan-zeolite Na-X composite beads with open porosity and different zeolite contents were prepared by an encapsulation method. Preparation conditions had to be optimised in order to stabilize the zeolite network during the polysaccharide gelling process. Composites and pure reference components were characterized using X-ray diffraction (XRD); scanning electron microscopy (SEM); N₂ adsorption-desorption; and thermogravimetric analysis (TG). Cu(II) sorption was investigated at pH 6. The choice of drying method used for the storage of the adsorbent severely affects the textural properties of the composite and the copper sorption effectiveness. The copper sorption capacity of chitosan hydrogel is about 190 mg·g(-1). More than 70% of this capacity is retained when the polysaccharide is stored as an aerogel after supercrititcal CO₂ drying, but nearly 90% of the capacity is lost after evaporative drying to a xerogel. Textural data and Cu(II) sorption data indicate that the properties of the zeolite-polysaccharide composites are not just the sum of the properties of the individual components. Whereas a chitosan coating impairs the accessibility of the microporosity of the zeolite; the presence of the zeolite improves the stability of the dispersion of chitosan upon supercritical drying and increases the affinity of the composites for Cu(II) cations. Chitosan-zeolite aerogels present Cu(II) sorption properties.

Alginic acid aerogel: a heterogeneous Brønsted acid promoter for the direct Mannich reaction

Alginic acid, a biopolymer from brown algae, promotes a Brønsted acid catalyzed Mannich reaction in its aerogel formulation.

Chitosan as a sustainable organocatalyst: a concise overview

Increased demand for more sustainable materials and chemical processes has tremendously advanced the use of polysaccharides, which are natural biopolymers, in domains such as adsorption, catalysis, and as an alternative chemical feedstock. Among these biopolymers, the use of chitosan, which is obtained by deacetylation of natural chitin, is on the increase due to the presence of amino groups on the polymer backbone that makes it a natural cationic polymer. The ability of chitosan-based materials to form open-network, macroporous, high-surface-area hydrogels with accessible basic surface sites has enabled their use not only as macrochelating ligands for active metal catalysts and as a support to disperse nanosized particles, but also as a direct organocatalyst. This review provides a concise overview of the use of native and modified chitosan, possessing different textural properties and chemical properties, as organocatalysts. Organocatalysis with chitosan is primarily focused on carbon-carbon bond-forming reactions, multicomponent heterocycle formation reactions, biodiesel production, and carbon dioxide fixation through [3+2] cycloaddition. Furthermore, the chiral, helical organization of the chitosan skeleton lends itself to use in enantioselective catalysis. Chitosan derivatives generally display reactivity similar to homogeneous bases, ionic liquids, and organic and inorganic salts. However, the introduction of cooperative acid-base interactions at active sites substantially enhances reactivity. These functional biopolymers can also be easily recovered and reused several times under solvent-free conditions. These accomplishments highlight the important role that natural biopolymers play in furthering more sustainable chemistry.

Chitosan-microreactor: a versatile approach for heterogeneous organic synthesis in microfluidics

Microreactors have been proven to be efficient tools for a variety of homogeneous organic transformations due to their mixing efficiency, which results in very fast reactions, better heat and mass transfer, and simple scale-up. However, in heterogeneous catalytic reactions each catalyst needs an individual substrate as support. Herein, a versatile approach to immobilize metal catalysts on chitosan as a common substrate is presented. Chitosan, accommodating many metal catalysts, is grafted onto the microchannel surface as nanobrush. The versatility, catalytic efficiency, and stability/durability of the microreactor are demonstrated for a number of organic transformations involving various metal compounds as catalysts.

Always look on the "light" side of life: sustainable carbon aerogels

The production of carbon aerogels based on the conversion of inexpensive and abundant precursors using environmentally friendly processes is a highly attractive subject in materials chemistry today. This article reviews the latest developments regarding the rapidly developing field of carbonaceous aerogels prepared from biomass and biomass-derived precursors, highlighting exciting and innovative approaches to green, sustainable nanomaterial synthesis. A review of the state-of-the-art technologies will be provided with a specific focus on two complimentary synthetic approaches developed upon the principles of green chemistry. These carbonaceous aerogel synthesis strategies, namely the Starbon and carbogel approaches, can be regarded as "top-down" and "bottom-up" strategies, respectively. The structural properties can be easily tailored by controlling synthetic parameters such as the precursor selection and concentration, the drying technique employed and post-synthesis temperature annealing. In addition to these parameters, the behavior of these sustainable carbon aerogel platforms in a variety of environmental and energy-related applications will also be discussed, including water remediation and fuel cell chemistry (i.e., the oxygen reduction reaction). This Review reveals the fascinating variety of highly porous, versatile, nanostructured, and functional carbon-based aerogels accessible through the highlighted sustainable synthetic platforms.

Chitosan as a renewable heterogeneous catalyst for the knoevenagel reaction in ionic liquid as green solvent

The combination of chitosan as a renewable heterogeneous catalyst and ionic liquid as a "green" solvent was employed for the Knoevenagel reaction. The chitosan catalyst was characterized by various techniques, including X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and elemental analysis. Excellent conversions were achieved under mild conditions without the need for an inert atmosphere. There was no contribution from leached active species, and conversion was only being possible in the presence of the solid catalyst. The chitosan catalyst as well as the ionic liquid solvent could be recovered in essentially pure form after being used in the reaction, and each of them could be reused several times without a significant degradation in efficiency.

Study of Alginate-Supported Ionic Liquid and Pd Catalysts

New catalytic materials, based on palladium immobilized in ionic liquid supported on alginate, were elaborated. Alginate was associated with gelatin for the immobilization of ionic liquids (ILs) and the binding of palladium. These catalytic materials were designed in the form of highly porous monoliths (HPMs), in order to be used in a column reactor. The catalytic materials were tested for the hydrogenation of 4-nitroaniline (4-NA) in the presence of formic acid as hydrogen donor. The different parameters for the elaboration of the catalytic materials were studied and their impact analyzed in terms of microstructures, palladium sorption properties and catalytic performances. The characteristics of the biopolymer (proportion of β-D-mannuronic acid (M) and α-L-guluronic acid (G) in the biopolymer defined by the M/G ratio), the concentration of the porogen agent, and the type of coagulating agent significantly influenced catalytic performances. The freezing temperature had a significant impact on structural properties, but hardly affected the catalytic rate. Cellulose fibers were incorporated as mechanical strengthener into the catalytic materials, and allowed to enhance mechanical properties and catalytic efficiency but required increasing the amount of hydrogen donor for catalysis.

Nanoscale coordination polymers exhibiting luminescence properties and NMR relaxivity

This article presents the first example of ultra-small (3-4 nm) magneto-luminescent cyano-bridged coordination polymer nanoparticles Ln0.33(3+)Gdx3+/[Mo(CN)8]3- (Ln=Eu (x=0.34), Tb (x=0.35)) enwrapped by a natural biocompatible polymer chitosan. The aqueous colloidal solutions of these nanoparticles present a luminescence characteristic of the corresponding lanthanides (5D0→7F0-4 (Eu3+) or the 5D4→7F6-2 (Tb3+)) under UV excitation and a green luminescence of the chitosan shell under excitation in the visible region. Magnetic Resonance Imaging (MRI) efficiency, i.e. the nuclear relaxivity, measurements performed for Ln0.33(3+)Gdx3+/[Mo(CN)8]3- nanoparticles show r1p and r2p relaxivities slightly higher than or comparable to the ones of the commercial paramagnetic compounds Gd-DTPA® or Omniscan® indicating that our samples may potentially be considered as a positive contrast agent for MRI. The in vitro studies performed on these nanoparticles show that they maybe internalized into human cancer and normal cells and well detected by fluorescence at the single cell level. They present high stability even at low pH and lack of cytotoxicity both in human cancer and normal cells.

Sorption efficiency of chitosan nanofibers toward metal ions at low concentrations

Chitosan fibers showing narrow diameter distribution with a mean of 42 nm were produced by electrospinning and utilized for the sorption of Fe(III), Cu(II), Ag(I), and Cd(II) ions from aqueous solutions. The ion concentrations in the supernatant solutions were determined using inductively coupled plasma-mass spectrometry (ICP-MS). The filtration efficiency of the fibers toward these ions was studied by both batch and microcolumn methods. High efficiency in sorption of the metal ions was obtained in the both methods. The effects of sorbent amount (0.10-0.50 mg), shaking time (15-120 min), initial metal ion concentration (10.0-1000.0 μg·L(-1)), and temperature (25 and 50 °C) on the extent of sorption were examined. The sorbent amount did not significantly alter the efficiency of sorption; however, shaking time, temperature, and metal ion concentration were found to have a strong influence on sorption. By virtue of its mechanical integrity, the applicability of the chitosan mat in solid phase extraction under continuous flow looks promising.