Fluorescent bead arrays by means of layer-by-layer polyelectrolyte adsorption

Mesoporous Silica Nanoparticles-Enhanced Microarray Technology for Highly Sensitive Simultaneous Detection of Multiplex Foodborne Pathogens

Ensuring food safety is paramount for the food industry and global health concerns. In this study, we have developed a method for the detection of prevalent foodborne pathogenic bacteria, including Escherichia coli, Salmonella spp., Listeria spp., Shigella spp., Campylobacter spp., Clostridium spp., and Vibrio spp., utilizing antibody-aptamer arrays. To enhance the fluorescence signals on the microarray, the mesoporous silica nanoparticles (MSNs) conjugated with fluorescein, streptavidin, and seven detection antibodies-biotin were employed, forming fluorescein doped mesoporous silica nanoparticles conjugated with detection antibodies (MSNs-Flu-SA-Abs) complexes. The array pattern was designed for easy readability and enabled the simultaneous detection of all seven foodborne pathogens, referred to as the 7FP-biochip. Following the optimization of MSNs-Flu-SA-Abs complexes attachment and enhancement of the detection signal in fluorescent immunoassays, a high level of sensitivity was achieved. The detection limits for the seven pathogens in both buffer and food samples were 102 CFU/mL through visual screening, with fluorescent intensity quantification achieving levels as low as 20-34 CFU/g were achieved on the antibody-aptamer arrays. Our antibody-aptamer array offers several advantages, including significantly reduced nonspecific binding with no cross-reaction between bacteria. Importantly, our platform detection exhibited no cross-reactivity among the tested bacteria in this study. The multiplex detection of foodborne pathogens in canned tuna samples with spiked bacteria was successfully demonstrated in real food measurements. In conclusion, our study presents a promising method for detecting multiple foodborne pathogens simultaneously. With its high sensitivity and specificity, the developed antibody-aptamer array holds great potential for enhancing food safety and public health.

Formulation and Biodegradation of Surface-Supported Biopolymer-Based Microgels Formed via Hard Templating onto Vaterite CaCO3 Crystals

In recent decades, there has been increased attention to the role of layer-by-layer assembled bio-polymer 3D structures (capsules, beads, and microgels) for biomedical applications. Such free-standing multilayer structures are formed via hard templating onto sacrificial cores such as vaterite CaCO3 crystals. Immobilization of these structures onto solid surfaces (e.g., implants and catheters) opens the way for the formulation of advanced bio-coating with a patterned surface. However, the immobilization step is challenging. Multiple approaches based mainly on covalent binding have been developed to localize these multilayer 3D structures at the surface. This work reports a novel strategy to formulate multilayer surface-supported microgels (ss-MG) directly on the surface via hard templating onto ss-CaCO3 pre-grown onto the surface via the direct mixing of Na2CO3 and CaCl2 precursor solutions. ss-MGs were fabricated using biopolymers: polylysine (PLL) as polycation and three polyanions-hyaluronic acid (HA), heparin sulfate (HS), and alginate (ALG). ss-MG biodegradation was examined by employing the enzyme trypsin. Our studies indicate that the adhesion of the ss-MG to the surface and its formation yield directly correlate with the mobility of biopolymers in the ss-MG, which decreases in the sequence of ALG > HA > HS-based ss-MGs. The adhesion of HS-based ss-MGs is only possible via heating during their formation. Dextran-loading increases ss-MG formation yield while reducing ss-MG shrinking. ss-MGs with higher polymer mobility possess slower biodegradation rates, which is likely due to diffusion limitations for the enzyme in more compact annealed ss-MGs. These findings provide valuable insights into the mechanisms underlying the formation and biodegradation of surface-supported biopolymer structures.

Luminescence encoding of polymer microbeads with organic dyes and semiconductor quantum dots during polymerization

Luminescence-encoded microbeads are important tools for many applications in the life and material sciences that utilize luminescence detection as well as multiplexing and barcoding strategies. The preparation of such beads often involves the staining of premanufactured beads with molecular luminophores using simple swelling procedures or surface functionalization with layer-by-layer (LbL) techniques. Alternatively, these luminophores are sterically incorporated during the polymerization reaction yielding the polymer beads. The favorable optical properties of semiconductor quantum dots (QDs), which present broadly excitable, size-tunable, narrow emission bands and low photobleaching sensitivity, triggered the preparation of beads stained with QDs. However, the colloidal nature and the surface chemistry of these QDs, which largely controls their luminescence properties, introduce new challenges to bead encoding that have been barely systematically assessed. To establish a straightforward approach for the bead encoding with QDs with minimized loss in luminescence, we systematically assessed the incorporation of oleic acid/oleylamine-stabilized CdSe/CdS-core/shell-QDs into 0.5-2.5 µm-sized polystyrene (PS) microspheres by a simple dispersion polymerization synthesis that was first optimized with the organic dye Nile Red. Parameters addressed for the preparation of luminophore-encoded beads include the use of a polymer-compatible ligand such as benzyldimethyloctadecylammonium chloride (OBDAC) for the QDs, and crosslinking to prevent luminophore leakage. The physico-chemical and optical properties of the resulting beads were investigated with electron microscopy, dynamic light scattering, optical spectroscopy, and fluorescence microscopy. Particle size distribution, fluorescence quantum yield of the encapsulated QDs, and QD leaking stability were used as measures for bead quality. The derived optimized bead encoding procedure enables the reproducible preparation of bright PS microbeads encoded with organic dyes as well as with CdSe/CdS-QDs. Although these beads show a reduced photoluminescence quantum yield compared to the initially very strongly luminescent QDs, with values of about 35%, their photoluminescence quantum yield is nevertheless still moderate.

The B & B approach: Ball-milling conjugation of dextran with phenylboronic acid (PBA)-functionalized BODIPY

Mechanochemistry is an emerging and reliable alternative to conventional solution (batch) synthesis of complex molecules under green and solvent-free conditions. In this regard, we report here on the conjugation of a dextran polysaccharide with a fluorescent probe, a phenylboronic acid (PBA)-functionalized boron dipyrromethene (BODIPY) applying the ball milling approach. The ball milling formation of boron esters between PBA BODIPY and dextran proved to be more efficient in terms of reaction time, amount of reactants, and labelling degree compared to the corresponding solution-based synthetic route. PBA-BODIPY dextran assembles into nanoparticles of around 200 nm by hydrophobic interactions. The resulting PBA-BODIPY dextran nanoparticles retain an apolar interior as proved by pyrene fluorescence, suitable for the encapsulation of hydrophobic drugs with high biocompatibility while remaining fluorescent.

Flow Cytometry Study of the Non-Fickean Diffusion of Small-Charged Molecules in Poly(diallyl dimethyl ammonium chloride)/Poly(styrene sodium sulfonate) Multilayers: Impact of the Layer Number, Top Layer, and Concentration of Diffusing Molecules

The diffusion of sodium dithionite (S₂O₄^2-) through polyelectrolyte multilayers of poly(diallyl dimethyl ammonium chloride) (PDADMAC)/poly(styrene sodium sulfonate) (PSS) assembled on colloidal particles with the layer-by-layer technique is studied by means of flow cytometry and quenching assay. Fluorescence is provided by a layer of (7-nitrobenz-2-oxa-1,3-diazol-4yl) amino) hexanoate (NBD)-labeled poly(allyl amine hydrochloride) assembled below the PDADMAC/PSS multilayer. NBD is quenched by a redox reaction with S₂O₄^2-. NBD quenching is fast at short times but strongly retarded at longer times. Quenching is faster for PDADMAC as the top layer and for increasing concentrations of S₂O₄^2-. The quenching kinetics of NBD is described with a model assuming a non-Fickean diffusion of S₂O₄^2-, with diffusion coefficients that depend on time with an inverse power law. Diffusion coefficients show little dependence on the number of layers but are highly dependent on the concentration of S₂O₄^2-. Increasing the concentration of S₂O₄^2- over 10 mol/m³ results in a decrease of the diffusion coefficient, more evident at longer times. The non-Fickean behavior for S₂O₄^2- diffusion is explained on the basis of the trapping of dithionites in the multilayers.

Anti-counterfeit nanoscale fingerprints based on randomly distributed nanowires

Counterfeiting is conducted in almost every industry, and the losses caused by it are growing as today's world trade continues to increase. In an attempt to provide an efficient method to fight such counterfeiting, we herein demonstrate anti-counterfeit nanoscale fingerprints generated by randomly distributed nanowires. Specifically, we prepare silver nanowires coated with fluorescent dyes and cast them onto the surface of transparent PET film. The resulting non-repeatable patterns characterized by the random location of the nanowires and their fluorescent colors provide unique barcodes suitable for anti-counterfeit purposes. Counterfeiting such a fingerprint pattern is impractical and expensive; the cost of replicating it would be higher than the value of the typical target item being protected. Fingerprint patterns can be visually authenticated in a simple and straightforward manner by using an optical microscope. The concept of generating unique patterns by randomness is not limited to the materials shown in this paper and should be readily applicable to other types of materials.

Incorporating fluorescent dyes into monodisperse melamine–formaldehyde resin microspheres via an organic sol–gel process: a pre-polymer doping strategy

An organic sol–gel process is developed to incorporate various organic fluorescent dyes into monodisperse melamine–formaldehyde (MF) resin microspheres. The dye incorporating mechanism is investigated and fluorescence-encoded microsphere arrays are prepared.

Fusion of enveloped virus nanoparticles with polyelectrolyte-supported lipid membranes for the design of bio/nonbio interfaces

Fusion of lipid-enveloped viruses with endosomal membranes triggered by low pH in the endosome is a key step in the course of viral infection. This ubiquitous mechanism can be used to integrate functional nanoparticles of viral origin into composite materials consisting of a polyelectrolyte multilayer with an adsorbed lipid membrane in a natural and biomimetic way. Polyelectrolyte multilayers as the support for the lipid membrane are a versatile means to combine the biological functions of the viral surface with the multiplicity of polyelectrolyte borne functions into a novel bio/nonbio composite material.