One-step preparation of bioactive enzyme/inorganic materials

Simultaneous exfoliation of crystalline α-zirconium phosphate (α-ZrP) nanosheets and enzyme binding, induced by shearing, without the addition of any toxic additives is reported here for the first time. These materials were thoroughly characterized and used for applications. The bulk α-ZrP material (20 mg mL^-1) was exfoliated with low concentrations of a protein such as bovine serum albumin (BSA, 3 mg mL^-1) in a shear reactor at 10k rpm for <80 minutes. Exfoliation was monitored by powder X-ray diffraction with samples displaying a gradual but complete loss of the 7.6 Å (002) peak, which is characteristic of bulk α-ZrP. The fully exfoliated sample loaded with the protein was characterized by transmission and scanning electron microscopy in addition to other biophysical methods. Lysozyme, glucose oxidase, met-hemoglobin, and ovalbumin also induced exfoliation and directly produced enzyme/ZrP biocatalysts. Thus, exfoliation, biophilization and enzyme binding are accomplished in a single step. Several factors contributed to the exfoliation kinetics, and the rate increased with α-ZrP and BSA concentrations and decreased with pH. However, the exfoliation efficiency inversely depended on the isoelectric point of the protein with ovalbumin (pI = 4.5) being the best and lysozyme (pI = 11.1) being the worst. A strong correlation between the protein size and exfoliation efficiency was noted, and the latter suggests the role of hydrodynamic factors in the process. Exfoliation was also achieved by simple stirring using a magnetic stirrer, under low volumes, and model enzymes, indicating 60-90% retention of bound enzymatic activities. The addition of BSA to enzymes as the diluent and stabilizing agent also prevents enzymes from the denaturing effect caused by stirring. This new method requires no pre-treatment of α-ZrP with toxic exfoliating agents such as tetrabutyl ammonium hydroxide and provides bioactive enzyme/inorganic materials in a single step. These protein-loaded biocompatible nanosheets may be useful for biocatalysis and biomedical applications.

Interlocking Enzymes in Graphene-Coated Cellulose Paper for Increased Enzymatic Efficiency

A simple method for interlocking glucose oxidase and horseradish peroxidase in a network of cellulose fibers coated with bovine serum albumin (BSA)-exfoliated graphene (biographene) is reported here. The resulting paper reactor is inexpensive and stable. Biographene is expected to function as an electron shuttle, making the reaction between the enzyme and the substrate more efficient, and this hypothesis is examined here. The BSA used to separate the sheets of graphene provides extra carboxylic acid groups and primary amines to help interlock the enzymes and the graphene in between the fibers. The decrease in entropy associated with interlocking the enzymes on a solid support is likely responsible for the increase in enzymatic stability/activity observed. Each cellulose disk contained 5.2mg of enzyme per gram of paper and 93% of the enzyme is retained after washing for 0.5-2h. This simple methodology provides a low cost, effective approach for achieving high enzymatic activity and good loadings on a benign, versatile support.

Enhanced catalytic activity and thermal stability of lipase bound to oxide nanosheets

The present study reports the effects of binding of lipase, which is an inexpensive digestive enzyme (candida antarctica lipase) that catalyzes the hydrolysis reaction and is frequently utilized for artificial synthesis of a variety of organic molecules, to titanate nanosheets (TNSs) on their biocatalytic activities and stabilities under several lipase concentrations. TNSs were prepared through a hydrolysis reaction of titanium tetraisopropoxide (TTIP) with tetrabutylammonium hydroxide (TBAOH), resulting in formation of a colorless and transparent colloidal solution including TNSs with nanometric dimensions (hydrodynamic diameter: ca. 5.6 nm). TNSs were bound to lipase molecules through electrostatic interaction in an aqueous phase at an appropriate pH, forming inorganic-bio nanohybrids (lipase-TNSs). The enzymatic reaction rate for hydrolysis of p-nitrophenyl acetate (pNPA) catalyzed by the lipase-TNSs, especially in diluted lipase concentrations, was significantly improved more than 8 times as compared with free lipase. On the other hand, it was confirmed that heat tolerance of lipase was also improved by binding to TNSs. These results suggest that the novel lipase-TNSs proposed here have combined enhancements of the catalytic activity and the anti-denaturation stability of lipase.

Rationally Designed, "Stable-on-the-Table" NanoBiocatalysts Bound to Zr(IV) Phosphate Nanosheets

Rational approaches for the control of nano-bio interfaces for enzyme stabilization are vital for engineering advanced, functional nanobiocatalysts, biosensors, implants, or "smart" drug delivery systems. This chapter presents an overview of our recent efforts on structural, functional, and mechanistic details of enzyme nanomaterials design, and describes how progress is being made by hypothesis-driven rational approaches. Interactions of a number of enzymes having wide ranges of surface charges, sizes, and functional groups with α-Zr(IV)phosphate (α-ZrP) nanosheets are carefully controlled to achieve high enzyme binding affinities, excellent loadings, significant retention of the bound enzyme structure, and high enzymatic activities. In specific cases, catalytic activities and selectivities of the nanobiocatalysts are improved over those of the corresponding pristine enzymes. Maximal enzyme structure retention has been obtained by coating the nanosheets with appropriate proteinaceous materials to soften the enzyme-nanosheet interface. These systematic manipulations are of significant importance to understand the complex behavior of enzymes at inorganic surfaces.

Rational Design of Nanoparticle Platforms for "Cutting-the-Fat": Covalent Immobilization of Lipase, Glycerol Kinase, and Glycerol-3-Phosphate Oxidase on Metal Nanoparticles

The aggregates of nanoparticles (NPs) are considered better supports for the immobilization of enzymes, as these promote enzyme kinetics, due to their unusual but favorable properties such as larger surface area to volume ratio, high catalytic efficiency of certain immobilized enzymes, non-toxicity of some of the nanoparticle matrices, high stability, strong adsorption of the enzyme of interest by a number of different approaches, and faster electron transportability. Co-immobilization of multiple enzymes required for a multistep reaction cascade on a single support is more efficient than separately immobilizing the corresponding enzymes and mixing them physically, since products of one enzyme could serve as reactants for another. These products can diffuse much more easily between enzymes on the same particle than diffusion from one particle to the next, in the reaction medium. Thus, co-immobilization of enzymes onto NP aggregates is expected to produce faster kinetics than their individual immobilizations on separate matrices. Lipase, glycerol kinase, and glycerol-3-phosphate oxidase are required for lipid analysis in a cascade reaction, and we describe the co-immobilization of these three enzymes on nanocomposites of zinc oxide nanoparticles (ZnONPs)-chitosan (CHIT) and gold nanoparticles-polypyrrole-polyindole carboxylic acid (AuPPy-Pin5COOH) which are electrodeposited on Pt and Au electrodes, respectively. The kinetic properties and analytes used for amperometric determination of TG are fully described for others to practice in a trained laboratory. Cyclic voltammetry, scanning electron microscopy, Fourier transform infra-red spectra, and electrochemical impedance spectra confirmed their covalent co-immobilization onto electrode surfaces through glutaraldehyde coupling on CHIT-ZnONPs and amide bonding on AuPPy/Pin5COOH. The combined activities of co-immobilized enzymes was tested amperometrically, and these composite nanobiocatalysts showed optimum activity within 4-5s, at pH 6.5-7.5 and 35°C, when polarized at a potential between 0.1 and 0.4V. Co-immobilized enzymes showed excellent linearity within 50-700mg/dl of the lipid with detection limit of 20mg/dl for triolein. The half life of co-immobilized enzymes was 7 months, when stored dry at 4°C which is very convenient for practical applications. Co-immobilized biocatalysts measured triglycerides in the sera of apparently healthy persons and persons suffering from hypertriglyceridemia, which is recognized as a leading cause for heart disease. The measurement of serum TG by co-immobilized enzymes was unaffected by the presence of a number of serum substances, tested as potential interferences. Thus, co-immobilization of enzymes onto aggregates of NPs resulted in improved performance for TG analysis.

Enhanced catalytic activity of enzymes interacting with nanometric titanate nanosheets

Enzymatic activity of horseradish peroxidase (HRP) at diluted conditions is highly increased under the presence of nanometric titanate nanosheets (TNS).

Biofunctionalization of α-zirconium phosphate nanosheets: toward rational control of enzyme loading, affinities, activities and structure retention

Controlling the properties of enzymes bound to solid surfaces in a rational manner is a grand challenge. Here we show that preadsorption of cationized bovine serum albumin (cBSA) to α-Zr(IV) phosphate (α-ZrP) nanosheets promotes enzyme binding in a predictable manner, and surprisingly, the enzyme binding is linearly proportional to the number of residues present in the enzyme or its volume, providing a powerful, new predictable tool. The cBSA loaded α-ZrP (denoted as bZrP) was tested for the binding of pepsin, glucose oxidase (GOX), tyrosinase, catalase, myoglobin and laccase where the number of residues increased from the lowest value of ∼153 to the highest value of 2024. Loading depended linearly on the number of residues, rather than enzyme charge or its isoelectric point. No such correlation was seen for the binding of these enzymes to α-ZrP nanosheets without the preadsorption of cBSA, under similar conditions of pH and buffer. Enzyme binding to bZrP was supported by centrifugation studies, powder X-ray diffraction and scanning electron microscopy/energy-dispersive X-ray spectroscopy. All the bound enzymes retained their secondary structure and the extent of structure retention depended directly on the amount of cBSA preadsorbed on α-ZrP, prior to enzyme loading. Except for tyrosinase, all enzyme/bZrP biocatalysts retained their enzymatic activities nearly 90-100%, and biofunctionalization enhanced the loading, improved structure retention and supported higher enzymatic activities. This approach of using a chemically modified protein to serve as a glue, with a predictable affinity/loading of the enzymes, could be useful to rationally control enzyme binding for applications in advanced biocatalysis and biomedical applications.

Intense emissions from photoproteins interacting with titanate nanosheets

Bioluminescence of Ca²⁺-binding photoprotein (aequorin, AEQ) is largely enhanced by the co-presence of titanate nanosheets that peptize AEQ agglomerates via a weak electrostatic interaction.

Nanobio interfaces: charge control of enzyme/inorganic interfaces for advanced biocatalysis

Specific approaches to the rational design of nanobio interfaces for enzyme and protein binding to nanomaterials are vital for engineering advanced, functional nanobiomaterials for biocatalysis, sensing, and biomedical applications. This feature article presents an overview of our recent discoveries on structural, functional, and mechanistic details of how enzymes interact with inorganic nanomaterials and how they can be controlled in a systematic manner using α-Zr(IV)phosphate (α-ZrP) as a model system. The interactions of a number of enzymes having a wide array of surface charges, sizes, and functional groups are investigated. Interactions are carefully controlled to screen unfavorable repulsions and enhance favorable interactions for high affinity, structure retention, and activity preservation. In specific cases, catalytic activities and substrate selectivities are improved over those of the pristine enzymes, and two examples of high activity near the boiling point of water have been demonstrated. Isothermal titration calorimetric studies indicated that enzyme binding is coupled to ion sequestration or release to or from the nanobio interface, and binding is controlled in a rational manner. We learned that (1) bound enzyme stabilities are improved by lowering the entropy of the denatured state; (2) maximal loadings are obtained by matching charge footprints of the enzyme and the nanomaterial surface; (3) binding affinities are improved by ion sequestration at the nanobio interface; and (4) maximal enzyme structure retention is obtained by biophilizing the nanobio interface with protein glues. The chemical and physical manipulations of the nanobio interface are significant not only for understanding the complex behaviors of enzymes at biological interfaces but also for desiging better functional nanobiomaterials for a wide variety of practical applications.

Metal-enzyme frameworks: role of metal ions in promoting enzyme self-assembly on α-zirconium(IV) phosphate nanoplates

Previously, an ion-coupled protein binding (ICPB) model was proposed to explain the thermodynamics of protein binding to negatively charged α-Zr(IV) phosphate (α-ZrP). This model is tested here using glucose oxidase (GO) and met-hemoglobin (Hb) and several cations (Zr(IV), Cr(III), Au(III), Al(III), Ca(II), Mg(II), Zn(II), Ni(II), Na(I), and H(I)). The binding constant of GO with α-ZrP was increased ∼380-fold by the addition of either 1 mM Zr(IV) or 1 mM Ca(II), and affinities followed the trend Zr(IV) ≃ Ca(II) > Cr(III) > Mg(II) ≫ H(I) > Na(I). Binding studies could not be conducted with Au(III), Al(III), Zn(II), Cu(II), and Ni(II), as these precipitated both proteins. Zr(IV) increased Hb binding constant to α-ZrP by 43-fold, and affinity enhancements followed the trend Zr(IV) > H(I) > Mg(II) > Na(I) > Ca(II) > Cr(III). Zeta potential studies clearly showed metal ion binding to α-ZrP and affinities followed the trend, Zr(IV) ≫ Cr(III) > Zn(II) > Ni(II) > Mg(II) > Ca(II) > Au(III) > Na(I) > H(I). Electron microscopy showed highly ordered structures of protein/metal/α-ZrP intercalates on micrometer length scales, and protein intercalation was also confirmed by powder X-ray diffraction. Specific activities of GO/Zr(IV)/α-ZrP and Hb/Zr(IV)/α-ZrP ternary complexes were 2.0 × 10(-3) and 6.5 × 10(-4) M(-1) s(-1), respectively. While activities of all GO/cation/α-ZrP samples were comparable, those of Hb/cation/α-ZrP followed the trend Mg(II) > Na(I) > H(I) > Cr(III) > Ca(II) ≃ Zr(IV). Metal ions enhanced protein binding by orders of magnitude, as predicted by the ICPB model, and binding enhancements depended on charge as well as the phosphophilicity/oxophilicity of the cation.

Control of enzyme-solid interactions via chemical modification

Electrostatic forces could contribute significantly toward enzyme-solid interactions, and controlling these charge-charge interactions while maintaining high affinity, benign adsorption of enzymes on solids is a challenge. Here, we demonstrate that chemical modification of the surface carboxyl groups of enzymes can be used to adjust the net charge of the enzyme and control binding affinities to solid surfaces. Negatively charged nanosolid, α-Zr(HPO(4))(2)·H(2)O (abbreviated as α-ZrP) and two negatively charged proteins, glucose oxidase (GO) and methemoglobin (Hb), have been chosen as model systems. A limited number of the aspartate and glutamate side chains of these proteins are covalently modified with tetraethylenepentamine (TEPA) to convert these negatively charged proteins into the corresponding positively charged ones (cationized). Cationized proteins retained their structure and activities to a significant extent, and the influence of cationization on binding affinities has been tested. Cationized GO, for example, showed 250-fold increase in affinity for the negatively charged α-ZrP, when compared to that of the unmodified GO, and cationized Hb, similarly, indicated 26-fold increase in affinity. Circular dichroism spectra showed that α-ZrP-bound cationized GO retained native-like structure to a significant extent, and activity studies showed that cationized GO/α-ZrP complex is ~2.5-fold more active than GO/α-ZrP. Cationized Hb/α-ZrP retained ~75% of activity of Hb/α-ZrP. Therefore, enzyme cationization enhanced affinities by 1-2 orders of magnitude, while retaining considerable activity for the bound biocatalyst. This benign, chemical control over enzyme charge provided a powerful new strategy to rationally modulate enzyme-solid interactions while retaining their biocatalytic properties.

Molecular signatures of enzyme-solid interactions: thermodynamics of protein binding to alpha-Zr(IV) phosphate nanoplates

Isothermal titration calorimetry (ITC) was used to determine the thermodynamics of protein binding to the nanoplates of alpha-Zr(HPO4)2.H2O (alpha-ZrP). The binding constants (K(b)) and DeltaG, DeltaH, and DeltaS have been evaluated for a small set of proteins, and K(b) values are in the range of 2-760 x 10(5) M(-1). The binding of positively charged proteins to the negatively charged alpha-ZrP was endothermic, while the binding of negatively charged proteins was exothermic, and these are contrary to expectations based on a simple electrostatic model. The binding enthalpies of the proteins varied over a range of -24 to +25 kcal/mol, and these correlated roughly with the net charge on the protein (R2 = 0.964) but not with other properties such as the number of basic residues, polar residues, isoelectric point, surface area, or molecular mass. Linear fits to the enthalpy plots indicated that each charge on the protein contributes 1.18 kcal/mol toward the binding enthalpy. Binding entropies of positively charged proteins were favorable (>0) while the binding entropies of negatively charged proteins were unfavorable (<0). The DeltaS values varied over a range of -51 to +98 cal/mol x K, and these correlated very well with the net charge on the protein (R2 = 0.999), but DeltaS is in the opposite direction of DeltaH. The binding or release of cations to/from the protein-solid interface can account for these observations. There was no correlation between the binding free energy (DeltaG(obs)) and any specific molecular properties, but it is likely to be a sum of several opposing interactions of large magnitudes. For the first time, the binding enthalpies and entropies are connected to specific molecular properties. The model suggests that the thermodynamic parameters can be controlled by choosing appropriate cations or by adjusting the net charge on the protein. We hope that physical insights such as these will be useful in understanding the complex behavior of proteins at biological interfaces.

Protein-solid interactions: important role of solvent, ions, temperature, and buffer in protein binding to alpha-Zr(IV) phosphate

The interaction of proteins with a solid surface involves a complex set of interactions, and elucidating the details of these interactions is essential in the rational design of solid surfaces for applications in biosensors, biocatalysis, and biomedical applications. We examined the enthalpy changes accompanying the binding of met-hemoglobin, met-myoglobin, and lysozyme to layered alpha-Zr(IV)phosphate (20 mM NaPipes, 1 mM TBA, pH 7.2, 298 K) by titration calorimetry, under specific conditions. The corresponding binding enthalpies for the three proteins are -24.2 +/- 2.2, -10.6 +/- 2, and 6.2 +/- 0.2 kcal/mol, respectively. The binding enthalpy depended on the charge of the protein where the binding of positively charged proteins to the negatively charged solid surface was endothermic while the binding of negatively charged proteins to the negatively charged solid was exothermic. These observations are contrary to a simple electrostatic model where binding to the oppositely charged surface is expected to be exothermic. The binding enthalpy depended on the net charge on the protein, ionic strength of the medium, the type of buffer ions present, and temperature. The temperature dependence studies of binding enthalpies resulted in the estimation of heat capacity changes accompanying the binding. The heat capacity changes observed with Hb, Mb, and lysozyme are 1.4 +/- 0.3, 0.89 +/- 0.2, and 0.74 +/- 0.1 kcal/(mol.K), respectively, and these values depended on the net charge of the protein. The enthalpy changes also depended linearly on the enthalpy of ionization of the buffer, and the numbers of protons released per protein estimated from this data are 12.6 +/- 2, 6.0 +/- 1.2, and 1.2 +/- 0.5 for Hb, Mb, and lysozyme, respectively. Binding enthalpies, independent of buffer ionization, are also estimated from these data. Entropy changes are related to the loss in the degrees of freedom when the protein binds to the solid and the displacement of solvent molecules/protons/ions from the protein-solid interface. Proton coupled protein binding is one of the major processes in these systems, which is novel, and the binding enthalpies can be predicted from the net charge of the protein, enthalpy of buffer ionization, ionic strength, and temperature.

A survey of the year 2007 literature on applications of isothermal titration calorimetry

Elucidation of the energetic principles of binding affinity and specificity is a central task in many branches of current sciences: biology, medicine, pharmacology, chemistry, material sciences, etc. In biomedical research, integral approaches combining structural information with in-solution biophysical data have proved to be a powerful way toward understanding the physical basis of vital cellular phenomena. Isothermal titration calorimetry (ITC) is a valuable experimental tool facilitating quantification of the thermodynamic parameters that characterize recognition processes involving biomacromolecules. The method provides access to all relevant thermodynamic information by performing a few experiments. In particular, ITC experiments allow to by-pass tedious and (rarely precise) procedures aimed at determining the changes in enthalpy and entropy upon binding by van't Hoff analysis. Notwithstanding limitations, ITC has now the reputation of being the "gold standard" and ITC data are widely used to validate theoretical predictions of thermodynamic parameters, as well as to benchmark the results of novel binding assays. In this paper, we discuss several publications from 2007 reporting ITC results. The focus is on applications in biologically oriented fields. We do not intend a comprehensive coverage of all newly accumulated information. Rather, we emphasize work which has captured our attention with originality and far-reaching analysis, or else has provided ideas for expanding the potential of the method.

Capture of phosphopeptides using alpha-zirconium phosphate nanoplatelets

Alpha-zirconium phosphate nanoplatelets (alpha-ZrPN) were studied as a binding agent for phosphopeptides. Nanoplatelets of alpha-zirconium phosphate were incubated overnight with zirconium oxychloride, followed by centrifugation, and washed twice with water followed by an aqueous solution of 80% acetonitrile to form the binding agent. Alpha-ZrPN were able specifically to capture phosphoserine-containing peptides from a tryptic digest of a complex peptide mixture in which its abundance was only 0.05%. Alpha-ZrPN also bound peptides containing phosphothreonine and phosphotyrosine. The limit of detection for phosphopeptides is approximately 2 fmol, based on using matrix-assisted laser desorption/ionization mass spectrometry. Alpha-ZrPN were applied for the analysis of tryptic digests of mouse liver and leukemia cell phosphoproteomes and succeeded in identifying 158 phosphopeptides (209 phosphorylation sites) from 101 phosphoproteins in mouse liver lysate and 78 phosphopeptides (104 phosphorylation sites) from 59 phosphoproteins in leukemia cell extract. For these two tryptic digests, the alpha-ZrPN approach is able to capture more phosphopeptides than that obtained from TiO2 particles or from Fe(3+)-IMAC beads, but each method is able to bind some phosphopeptides that the others do not.