How the Metal Ion Affects the 1H NMR Chemical Shift Values of Schiff Base Metal Complexes: Rationalization by DFT Calculations

The chemical shift (CS) values obtained by 1H NMR spectroscopy for the hydrogen atoms of a tetradentate N2O2-substituted Salphen ligand (H2L1) are differently shifted in its complexes of nickel(II), palladium(II), platinum(II), and zinc(II), all bearing the same charge on the metal ions. To rationalize the observed trends, DFT calculations have been performed in the implicit d6-DMSO solvent in terms of the electronic effects induced by the metal ion and of the nature and strength of the metal-N and metal-O bonds. Overall, the results obtained point out that, in the complexes involving group 10 elements, the CS values show the greater shift when considering the two hydrogen atoms at a shorter distance from the coordinated metal center and follow the decreasing metal charge in the order Ni > Pd > Pt. This trend suggests a more covalent character of the ligand-metal bonds with the increase of the metal atomic number. Furthermore, a slightly poorer agreement between experimental and calculated data is observed in the presence of the nickel(II) ion. Such discrepancy is explained by the formation of stacked oligomers, aimed at minimizing the repulsive interactions with the polar DMSO solvent.

NMR-Metabolomic Profiling and Genome Mining Drive the Discovery of Cyclic Decapeptides from a Marine Streptomyces

The integration of NMR-metabolomic and genomic analyses can provide enhanced identification of structural properties as well as key biosynthetic information, thus achieving the targeted discovery of new natural products. For this purpose, NMR-based metabolomic profiling of the marine-derived Streptomyces sp. S063 (CGMCC 14582) was performed, by which N-methylated peptides possessing unusual negative 1H NMR chemical shift values were tracked. Meanwhile, genome mining of this strain revealed the presence of an unknown NRPS gene cluster (len) with piperazic-acid-encoding genes (lenE and lenF). Under the guidance of the combined information, two cyclic decapeptides, lenziamides D1 (1) and B1 (2), were isolated from Streptomyces sp. S063, which contains piperazic acids with negative 1H NMR values. The structures of 1 and 2 were determined by extensive spectroscopic analysis combined with Marfey's method and ECD calculations. Furthermore, we provided a detailed model of lenziamide (1 and 2) biosynthesis in Streptomyces sp. S063. In the cytotoxicity evaluation, 1 and 2 showed moderate growth inhibition against the human cancer cells HEL, H1975, H1299, and drug-resistant A549-taxol with IC50 values of 8-24 μM.

Control over Selectivity in Alkene Hydrosilylation Catalyzed by Cobalt(III) Hydride Complexes

Two new bisphosphine [PCP] pincer cobalt(III) hydrides, [(L¹)Co(PMe₃)(H)(Cl)] (^L11, L¹ = 2,6-((Ph₂P)(Et)N)₂C₆H₃) and [(L²)Co(PMe₃)(H)(Cl)] (^L21, L² = 2,6-((ⁱPr₂P)(Et)N)₂C₆H₃), as well as one new bissilylene [SiCSi] pincer cobalt(III) hydride, [(L³)Co(PMe₃)(H)(Cl)] (^L31, L³ = 1,3-((PhC(^tBuN)₂Si)(Et)N)₂C₆H₃), were synthesized by reaction of the corresponding protic [PCP] or [SiCSi] pincer ligands L¹H, L²H, and L³H with CoCl(PMe₃)₃. Despite the similarities in the ligand scaffolds, the three cobalt(III) hydrides show remarkably different performance as catalysts in alkene hydrosilylation. Among the PCP pincer complexes, ^L11 has higher catalytic activity than complex ^L21, and both catalysts afford anti-Markovnikov selectivity for both aliphatic and aromatic alkenes. In contrast, the catalytic activity for alkene hydrosilylation of silylene complex ^L31 is comparable to phosphine complex ^L11, but a dependence of regioselectivity on the substrates was observed: While aliphatic alkenes are converted in an anti-Markovnikov fashion, the hydrosilylation of aromatic alkenes affords Markovnikov products. The substrate scope was explored with 28 examples. Additional experiments were conducted to elucidate these mechanisms of hydrosilylation. The synthesis of cobalt(I) complex (L¹)Co(PMe₃)₂ (^L17) and its catalytic properties for alkene hydrosilylation allowed for the proposal of the mechanistic variations that occur in dependence of reaction conditions and substrates.

Direct Production of a Hyperpolarized Metabolite on a Microfluidic Chip

Microfluidic systems hold great potential for the study of live microscopic cultures of cells, tissue samples, and small organisms. Integration of hyperpolarization would enable quantitative studies of metabolism in such volume limited systems by high-resolution NMR spectroscopy. We demonstrate, for the first time, the integrated generation and detection of a hyperpolarized metabolite on a microfluidic chip. The metabolite [1-¹³C]fumarate is produced in a nuclear hyperpolarized form by (i) introducing para-enriched hydrogen into the solution by diffusion through a polymer membrane, (ii) reaction with a substrate in the presence of a ruthenium-based catalyst, and (iii) conversion of the singlet-polarized reaction product into a magnetized form by the application of a radiofrequency pulse sequence, all on the same microfluidic chip. The microfluidic device delivers a continuous flow of hyperpolarized material at the 2.5 μL/min scale, with a polarization level of 4%. We demonstrate two methods for mitigating singlet–triplet mixing effects which otherwise reduce the achieved polarization level.

Formation and Reactivity of a Hexahydridosilicate [SiH6]2- Coordinated by a Macrocycle-Supported Strontium Cation

The cationic benzyl complex [(Me₄TACD)Sr(CH₂Ph)][A] (Me₄TACD=1,4,7,10‐tetramethyltetraazacyclododecane; A=B(C₆H₃‐3,5‐Me₂)₄) reacted with two equivalents of phenylsilane to give the bridging hexahydridosilicate complex [(Me₄TACD)₂Sr₂(thf)₄(μ‐κ³ : κ³‐SiH₆)][A]₂ (3 a). Rapid phenyl exchange between phenylsilane molecules is assumed to generate monosilane SiH₄ that is trapped by two strontium hydride cations [(Me₄TACD)SrH(thf)_x]⁺. Complex 3 a decomposed in THF at room temperature to give the terminal silanide complex [(Me₄TACD)Sr(SiH₃)(thf)₂][A], with release of H₂. Upon reaction with a weak Brønsted acid, CO₂, and 1,3,5,7‐cyclooctatetraene SiH₄ was released. The reaction of a 1 : 2 mixture of cationic benzyl and neutral dibenzyl complex with phenylsilane gave the trinuclear silanide complex [(Me₄TACD)₃Sr₃(μ₂‐H)₃(μ₃‐SiH₃)₂][A], while ⁿOctSiH₃ led to the trinuclear (n‐octyl)pentahydridosilicate complex [(Me₄TACD)₃Sr₃(μ₂‐H)₃(μ₃‐SiH₅ⁿOct)][A].

A combined theoretical/experimental study highlighting the formation of carbides on Ru nanoparticles during CO hydrogenation

Formation of stable carbides during CO bond dissociation on small ruthenium nanoparticles (RuNPs) is demonstrated, both by means of DFT calculations and by solid state ¹³C NMR techniques. Theoretical calculations of chemical shifts in several model clusters are employed in order to secure experimental spectroscopic assignations for surface ruthenium carbides. Mechanistic DFT investigations, carried out on a realistic Ru₅₅ nanoparticle model (∼1 nm) in terms of size, structure and surface composition, reveal that ruthenium carbides are obtained during CO hydrogenation. Calculations also indicate that carbide formation via hydrogen-assisted hydroxymethylidyne (COH) pathways is exothermic and occurs at reasonable kinetic cost on standard sites of the RuNPs, such as 4-fold ones on flat terraces, and not only in steps as previously suggested. Another novel outcome of the DFT mechanistic study consists of the possible formation of μ₆ ruthenium carbides in the tip-B₅ site, similar examples being known only for molecular ruthenium clusters. Moreover, based on DFT energies, the possible rearrangement of the surface metal atoms around the same tip-site results in a μ-Ru atom coordinated to the remaining RuNP moiety, reminiscent of a pseudo-octahedral metal center on the NP surface.

Computation provides chemical insight into the diverse hydride NMR chemical shifts of [Ru(NHC)4(L)H]0/+ species (NHC = N-heterocyclic carbene; L = vacant, H2, N2, CO, MeCN, O2, P4, SO2, H-, F- and Cl-) and their [Ru(R2PCH2CH2PR2)2(L)H]+ congeners

Relativistic density functional theory calculations, both with and without the effects of spin-orbit coupling, have been employed to model hydride NMR chemical shifts for a series of [Ru(NHC)₄(L)H]^0/+ species (NHC = N-heterocyclic carbene; L = vacant, H₂, N₂, CO, MeCN, O₂, P₄, SO₂, H^-, F^- and Cl^-), as well as selected phosphine analogues [Ru(R₂PCH₂CH₂PR₂)₂(L)H]⁺ (R = ⁱPr, Cy; L = vacant, O₂). Inclusion of spin-orbit coupling provides good agreement with the experimental data. For the NHC systems large variations in hydride chemical shift are shown to arise from the paramagnetic term, with high net shielding (L = vacant, Cl^-, F^-) being reinforced by the contribution from spin-orbit coupling. Natural chemical shift analysis highlights the major orbital contributions to the paramagnetic term and rationalizes trends via changes in the energies of the occupied Ru d_π orbitals and the unoccupied σ*_Ru-H orbital. In [Ru(NHC)₄(η²-O₂)H]⁺ a δ-interaction with the O₂ ligand results in a low-lying LUMO of d_π character. As a result this orbital can no longer contribute to the paramagnetic shielding, but instead provides additional deshielding via overlap with the remaining (occupied) d_π orbital under the L_z angular momentum operator. These two effects account for the unusual hydride chemical shift of +4.8 ppm observed experimentally for this species. Calculations reproduce hydride chemical shift data observed for [Ru(ⁱPr₂PCH₂CH₂PⁱPr₂)₂(η²-O₂)H]⁺ (δ = -6.2 ppm) and [Ru(R₂PCH₂CH₂PR₂)₂H]⁺ (ca. -32 ppm, R = ⁱPr, Cy). For the latter, the presence of a weak agostic interaction trans to the hydride ligand is significant, as in its absence (R = Me) calculations predict a chemical shift of -41 ppm, similar to the [Ru(NHC)₄H]⁺ analogues. Depending on the strength of the agostic interaction a variation of up to 18 ppm in hydride chemical shift is possible and this factor (that is not necessarily readily detected experimentally) can aid in the interpretation of hydride chemical shift data for nominally unsaturated hydride-containing species. The synthesis and crystallographic characterization of the BAr^F₄^- salts of [Ru(IMe₄)₄(L)H]⁺ (IMe₄ = 1,3,4,5-tetramethylimidazol-2-ylidene; L = P₄, SO₂; Ar^F = 3,5-(CF₃)₂C₆H₃) and [Ru(IMe₄)₄(Cl)H] are also reported.

Rhenium-catalysed hydroboration of aldehydes and aldimines

The first examples of the catalysed hydroboration of aldehydes and aldimines using low- and high-valent rhenium complexes are reported.

Solid-state NMR concepts for the investigation of supported transition metal catalysts and nanoparticles

In recent years, solid-state NMR spectroscopy has evolved into an important characterization tool for the study of solid catalysts and chemical processes on their surface. This interest is mainly triggered by the need of environmentally benign organic transformations ("green chemistry"), which has resulted in a large number of new catalytically active hybrid materials, which are organized on the meso- and nanoscale. Typical examples of these catalysts are supported homogeneous transition metal catalysts or transition metal nanoparticles (MNPs). Solid-state NMR spectroscopy is able to characterize both the structures of these materials and the chemical processes on the catalytic surface. This article presents recent trends both on the characterization of immobilized homogeneous transition metal catalysts and on the characterization of surface species on transition metal surfaces.

DFT 2H quadrupolar coupling constants of ruthenium complexes: a good probe of the coordination of hydrides in conjuction with experiments

Transition metal (TM) hydrides are of great interest in chemistry because of their reactivity and their potential as catalysts for hydrogenation reactions. 2H solid-state NMR can be used in order to get information about the local environment of hydrogen atoms, and more particularly the coordination mode of hydrides in such complexes. In this work we will show that it is possible to establish at the level of density functional theory (DFT) a viable methodological strategy that allows the determination of 2H NMR parameters, namely the quadrupolar coupling constant (C(Q)) respectively the quadrupolar splitting (deltanuQ) and the asymmetry parameter (etaQ). The reliability of the method (B3PW91-DFT) and basis set effects have been first evaluated for simple organic compounds (benzene and fluorene). A good correlation between experimental and theoretical values is systematically obtained if the large basis set cc-pVTZ is used for the computations. 2H NMR properties of five mononuclear ruthenium complexes (namely Cp*RuD3(PPh3), Tp*RuD(THT)2, Tp*RuD(D2)(THT) and Tp*RuD(D2)2 and RuD2(D2)2(PCy3)2) which exhibit different ligands and hydrides involved in different coordination modes (terminal-H or eta2-H2), have been calculated and compared to previous experimental data. The results obtained are in excellent agreement with experiments. Although 2H NMR spectra are not always easy to analyze, assistance by quantum chemistry calculations allows unambiguous assignment of the signals of such spectra. As far as experiments can be achieved at very low temperatures in order to avoid dynamic effects, this hybrid theoretical/experimental tool may give useful insights in the context of the characterization of ruthenium surfaces or nanoparticles with solid-state NMR.

Ligand effect on the NMR, vibrational and structural properties of tetra- and hexanuclear ruthenium hydrido clusters: a theoretical investigation

Structural and spectroscopic properties of tetranuclear ruthenium hydrido clusters, and to a less extent, of hexanuclear ruthenium hydrido clusters, are investigated theoretically. Some of these (H)(n)Ru(k)(L)(m) (k = 4, 6) clusters were experimentally synthesized and characterized. Non-existing structures are also considered in order to examine the role of ligands on their structure, vibrational spectra and (1)H NMR chemical shifts. The calculated properties are found in very good agreement with experimental data, when available. Beyond the intrinsic interest elicited by transition metal clusters, these compounds are also considered in this paper as relevant to diamagnetic ruthenium nanoparticles as well as building blocks of hcp surfaces, which is the ruthenium nanoparticle lattice. On the basis of the very good agreement between experiments and theory, the structural and spectroscopic properties of several model clusters are also predicted in order to bring additional data which may help to analyze the spectral signature of ruthenium nanoparticles. A particular emphasis is put on (1)H NMR, which is of high practical importance for characterizing the presence of hydrides in ruthenium clusters and nanoparticles. Several topics are discussed: the structural preference of surface hydrides for terminal-, edge-bridging or face-capping coordination modes, hydrides adsorption energies, the possible presence of interstitial hydrogen atoms, the dependence of (1)H chemical shifts on ligands and on electron counting.