Synthesis of 1,2-Bis- and 1,1,2-Tris-Borylalkanes under Transition Metal-Free and Solvent-Free Conditions

Multi(boronate) esters are useful building blocks in modern chemical synthesis. Herein, we have developed an efficient, transition metal- and solvent-free method for the regioselective boration of alkenes and alkynes. The alkali metal Lewis base (NaOMe)-mediated reactions, using bis(pinacolato)diboron (B2pin2) as the boron reagent, resulted in the diboration of alkenes at room temperature and the triboration of alkynes at 60 °C to produce synthetically useful alkyl 1,2-bis(boronate) esters and 1,1,2-tris(boronate) esters, respectively, in excellent yields and with high regioselectivity. This environmentally benign protocol demonstrates a broad substrate scope and good functional group tolerance for alkenes and alkynes. The gram-scale reaction further highlights the practical usefulness of the method. The proposed reaction pathway has been evaluated based on stoichiometric reactions and DFT studies.

Side-on phosphinoboryl platinum(II) complexes

The oxidative addition of bromo(phosphino)boranes to platinum(0) compounds enabled the formation of platinum(II) complexes with unprecedented side-on coordination of the boryl ligand. The resulting complex underwent a reaction with carbon dioxide, leading to the insertion of a CO2 molecule into the B-P bond of the phosphinoboryl ligand.

Stereodivergency in Copper-Catalyzed Borylative Difunctionalizations: The Impact of Boron Coordination

A reagent-controlled diastereodivergent copper-catalyzed borylative difunctionalization is reported. The formation of Lewis adducts that guide selectivity is commonly invoked in organic reaction mechanisms. Using density functional theory calculations, we identified BpinBdan as a sterically similar and less Lewis acidic alternative to B2pin2. Using a newly developed borylative aldol domino reaction as the proof-of-concept, we demonstrate a change in stereochemical outcome by a simple change of borylating reagent-B2pin2 affords the diastereomer associated with coordination control while BpinBdan overturns this mode of binding. We show that this strategy can be generalized to other scaffolds and, more importantly, that BpinBdan does not alter the diastereomeric outcome of the reaction when coordination is not involved. BpinBdan can be viewed as a mechanistic probe for coordination in future copper-catalyzed borylation reactions.

A-Frame-Templated High-Coordinate Platinum(IV) cis-Bis(boryl) Complexes

The addition of Et2O·BF3 or Me2S·BCl3 to the BNBN-cumulene-bridged Pt(II) A-frame complexes [(μ-1,1-BNBN(TMS)2)(μ-dmpm)2Pt2X2] (TMS = SiMe3, dmpm = CH2(PMe2)2, X = Br 1Br, I 1I) resulted in the oxidative addition of one B-F or B-Cl bond, respectively, to the internal BN bond of the bridging, iminoborane-like B-N≡B-N moiety, and coordination of one Pt(II) center to the resulting adjacent BF2 (complex 2Br-F) or BCl2 (complexes 2Br-Cl and 2I-Cl) moiety, respectively. X-ray crystallographic and multinuclear NMR-spectroscopic data show that the Pt→BF2 interaction in 2Br-F is very weak and merely electrostatic, while the Pt→BCl2 interaction in 2Br-Cl and 2I-Cl is a stronger donor-acceptor bond. In contrast, the reaction of Me2S·BBr3 with 1Br yielded a ca. 3:2 mixture of the analogous B-Br addition product to the iminoborane, 2Br-Br, and the product of a subsequent oxidative addition of one B-Br bond of the chelating BBr2 moiety to the adjacent platinum center, the mixed-valence boranediyl-bridged, Pt(II)-Pt(IV)-bromoboryl complex 3-Br5. The analogous reactions of Me2S·BI3 with 1Br and Me2S·BBr3 with 1I yielded complex product mixtures of Pt(II)-Pt(II)-borane (2Br-I and 2I-Br, respectively) and Pt(II)-Pt(IV)-boryl complexes (3-BrnI5-n, n = 1-3) analogous to 2X-Y and 3-Br5, respectively, the proportion of the latter increasing with the proportion of iodide in the precursor mixture. Both multinuclear NMR-spectroscopic and X-ray crystallographic data show evidence of complex and extensive inter- and intramolecular bromide-iodide exchanges between the soft, iodide-affine platinum centers and the harder, more bromide-affine boron centers. A clue to the mechanism of these halide exchanges is provided by the reactions of BBr2Ar (Ar = 2,4,6-Me3C6H2 (Mes), 2,3,5,6-Me4C6H (Dur)) with 1Br, which yielded the cationic Pt(II)-Pt(II)-borenium analogues of 2Br-Br, the complexes 4Br-Ar, generated by the sterics-induced displacement of the bromide substituent from the chelating Pt→BBrAr moiety, and displaying a rare metal→borenium donor-acceptor bond.

Boryls, their compounds and reactivity: a structure and bonding perspective

Boryls and their compounds are important due to their diverse range of applications in the fields of materials science and catalysis. They are an integral part of boron chemistry, which has attracted tremendous research interest over the past few decades. In this perspective, we provide an in-depth analysis of the reaction chemistry of boryl compounds from a structure and bonding perspective. We discuss the reactivity of boryls in various transition metal complexes and diborane(4) compounds towards different substrate molecules, with a focus on their nucleophilic and electrophilic properties in various reaction processes. Additionally, we briefly discuss the reactivity of boryl radicals. Our analysis sheds new light on the unique properties of boryls and their potential for catalytic applications.

Contrasting reactivity of B-Cl and B-H bonds at [Ni(IMes)2] to form unsupported Ni-boryls

[Ni(IMes)2] reacts with chloroboranes via oxidative addition to form rare unsupported Ni-boryls. In contrast, the oxidative addition of hydridoboranes is not observed and products from competing reaction pathways are identified. Computational studies relate these differences to the mechanism of oxidative addition: B-Cl activation proceeds via nucleophilic displacement of Cl-, while B-H activation would entail high energy concerted bond cleavage.

Synthesis of Alkyl and Aryl Boronate Esters via CeO2-Catalyzed Borylation of Alkyl and Aryl Electrophiles Including Alkyl Chlorides

A recyclable protocol using a CeO2-nanorod catalyst for borylation of alkyl halides with B2pin2 (pin = OCMe2CMe2O) is reported. A wide range of synthetically useful alkyl boronate esters are readily obtained from primary and secondary alkyl electrophiles, including unactivated alkyl chlorides, demonstrating broad utility and functional group tolerance. Preliminary investigation revealed an involvement of in situ formed catalytically active boryl species. The catalyst can be reused for up to six runs without appreciable loss in activity. In addition, we have demonstrated the use of this recyclable catalyst for the borylation of aryl halides with B2pin2, providing valuable aryl boronate esters under neat conditions.

On the Reactivity of a NHC Nickel Bis-Boryl Complex: Reductive Elimination and Formation of Mono-Boryl Complexes

The synthesis of the first terminal mono-boryl complexes of nickel, which are not stabilized by a pincer ligand, is reported. The reaction of the nickel bis-boryl complex cis-[Ni(i Pr2 ImMe )2 (Bcat)2 ] 1 (cat=1,2-O2 C6 H4 ) with the small donor ligand PMe3 led to a complete ligand exchange at nickel with reductive elimination of B2 cat2 and formation of the bis-NHC adduct [B2 cat2  ⋅ (i Pr2 ImMe )2 ] 3 and [Ni(PMe3 )4 ] 2 as the metal-containing species. Electrophilic attack of MeI on complex 1 or ligand dismutation of 1 with trans-[Ni(i Pr2 ImMe )2 Br2 ] led to loss of only one boryl ligand of 1 and afforded the nickel mono-boryl complexes trans-[Ni(i Pr2 ImMe )2 (Bcat)Br] 4 a and trans-[Ni(i Pr2 ImMe )2 (Bcat)I] 4 b.

Aluminum-Boron Bond Formation by Boron Ester Oxidative Addition at an Alumanyl Anion

The potassium diamidoalumanyl, [K{Al(SiNDipp)}]2 (SiNDipp = {CH2SiMe2NDipp}2), reacts with the terminal B-O bonds of pinacolato boron esters, ROBpin (R = Me, i-Pr), and B(OMe)3 to provide potsassium (alkoxy)borylaluminate derivatives, [K{Al(SiNDipp)(OR)(Bpin)}]n (R = Me, n = 2; R = i-Pr, n = ∞) and [K{Al(SiNDipp)(OMe)(B(OMe)2)}]∞, comprising Al-B σ bonds. An initial assay of the reactivity of these species with the heteroallene molecules, N,N'-diisopropylcarbodiimide and CO2, highlights the kinetic inaccessibility of their Al-B bonds; only decomposition at high temperature is observed with the carbodiimide, whereas CO2 preferentially inserts into the Al-O bond of [K{Al(SiNDipp)(OMe)(Bpin)}]2 to provide a dimeric methyl carbonate species. Treatment of the acyclic dimethoxyboryl species, however, successfully liberates a terminal alumaboronic ester featuring trigonal N2Al-BO2 coordination environments at both boron and aluminum.

Nickel boryl complexes and nickel-catalyzed alkyne borylation

The first nickel bis-boryl complexes cis-[Ni( ⁱ Pr₂Im^Me)₂(Bcat)₂], cis-[Ni( ⁱ Pr₂Im^Me)₂(Bpin)₂] and cis-[Ni( ⁱ Pr₂Im^Me)₂(Beg)₂] are reported, which were prepared via the reaction of a source of [Ni( ⁱ Pr₂Im^Me)₂] with the diboron(4) compounds B₂cat₂, B₂pin₂ and B₂eg₂ ( ⁱ Pr₂Im^Me = 1,3-di-iso-propyl-4,5-dimethylimidazolin-2-ylidene; B₂cat₂ = bis(catecholato)diboron; B₂pin₂ = bis(pinacolato)diboron; B₂eg₂ = bis(ethylene glycolato)diboron). X-ray diffraction and DFT calculations strongly suggest that a delocalized, multicenter bonding scheme dictates the bonding situation of the NiB₂ moiety in these square planar complexes, reminiscent of the bonding situation of "non-classical" H₂ complexes. [Ni( ⁱ Pr₂Im^Me)₂] also efficiently catalyzes the diboration of alkynes using B₂cat₂ as the boron source under mild conditions. In contrast to the known platinum-catalyzed diboration, the nickel system follows a different mechanistic pathway, which not only provides the 1,2-borylation product in excellent yields, but also provides an efficient approach to other products such as C-C coupled borylation products or rare tetra-borylated compounds. The mechanism of the nickel-catalyzed alkyne borylation was examined by means of stoichiometric reactions and DFT calculations. Oxidative addition of the diboron reagent to nickel is not dominant; the first steps of the catalytic cycle are coordination of the alkyne to [Ni( ⁱ Pr₂Im^Me)₂] and subsequent borylation at the coordinated and, thus, activated alkyne to yield complexes of the type [Ni(NHC)₂(η²-cis-(Bcat)(R)C[double bond, length as m-dash]C(R)(Bcat))], exemplified by the isolation and structural characterization of [Ni( ⁱ Pr₂Im^Me)₂(η²-cis-(Bcat)(Me)C[double bond, length as m-dash]C(Me)(Bcat))] and [Ni( ⁱ Pr₂Im^Me)₂(η²-cis-(Bcat)(H₇C₃)C[double bond, length as m-dash]C(C₃H₇)(Bcat))].

Auto-Tandem Copper-Catalyzed Carboxylation of Undirected Alkenyl C-H Bonds with CO2 by Harnessing β-Hydride Elimination

The exploration into challenging scenarios of the application of elementary reactions offers excellent opportunities for the development of unique transformations under organometallic catalysis. As a ubiquitous reaction of metal alkyl complexes, β-hydride elimination plays a crucial role in a number of important catalytic transformations. However, its functions in these catalytic cycles are limited to either releasing alkene products or generating isomerized intermediates through further migratory insertion. Herein, we report that the precise manipulation of β-hydride elimination enables an auto-tandem copper catalysis for the carboxylation of undirected alkenyl C-H bonds with CO₂. In this transformation, β-hydride elimination of an alkyl copper intermediate is facilitated, while its reaction with CO₂ is suppressed. The resulting copper hydride in turn reacts with CO₂ to provide access to a multitasking catalyst, which enables the tandem borylation/carboxylation of C-H bonds in two mechanistically distinct catalytic cycles.

Enantio- and Diastereoselective Cu(II)-Catalyzed Conjugate Borylation/Michael Addition Cascade: Synthesis of Spiroindane Boronates

We report a Cu(II)-(S,S)-ⁱPr-FOXAP-catalyzed borylative Michael/Michael addition cascade cyclization of unsymmetrical dienone for the synthesis of highly substituted and functionalized all-carbon spiroindane boronates under mild conditions. A series of optically active spiroindanes bearing boronic ester were obtained with excellent yields and good to excellent enantioselectivities (≤97% ee) and diastereoselectivities (up to >20:1 dr). In addition, scale-up synthesis of this method and synthetic transformations of spiroindane boronates are also illustrated.

Insertion chemistry of iron(II) boryl complexes

Iron(II) boryl complexes of the pyrrole-based pincer ligand, ^CyPNP (^CyPNP = anion of 2,5-bis(dicyclohexylphophinomethyl)pyrrole) have been synthesized and their insertion reactivity interrogated. Compounds of the type [Fe(BE)(^CyPNP)] (E = pinacholato or catecholato) can be generated by treatment of the precursors, [Fe(OPh)(py)(^CyPNP)] or [FeMe(^CyPNP)], with B₂E₂. The boryl complexes are meta stable, but permit additional reactivity with several unsaturated substrates. Reaction with alkynes, RCCR', leads to rapid insertion into the Fe-B bond to generate stable vinyl boronate complexes of the type [Fe(C{R}C{R'}BE)(^CyPNP)] (R, R' = H, Me, Ph, -CCPh). Each of the compounds is five-coordinate in the solid state by virtue of coordination of one of the oxygen atoms of the boronate ester. Similar reaction with nitriles, RCN (R = Ph, Me), results in facile de-cyanation to produce the correpsonding hydrocarbon complexes, [FeR(^CyPNP)]. In the case of the bulky nitrile 1-AdCN, the insertion intermediate, [Fe(C{Ad}NBpin)(^CyPNP)], has been isolated and structurally characterized. Treatment of the boryl complexes with styrene derivatives results in initial insertion to give an alkylboronate complex followed by either β-H elimination or protonation to give the products of C-H borylation and hydroboration, respectively.

Copper-Catalyzed Borylation of Acyl Chlorides with an Alkoxy Diboron Reagent: A Facile Route to Acylboron Compounds

Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B2 pin2 ) or bis(neopentane glycolato)diboron (B2 neop2 ) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.

Reactivity of Unsupported Transition Metal-Aluminyl Complexes: A Nucleophilic TM-Al Bond

Despite the long history of research in transition metal (TM) complexes, the study of TM-aluminyl complexes is still in its early stage of development. It is expected that the presence of an electropositive Al donor atom would open up new possibilities in TM complex reactivity, and indeed TM-aluminyl has shown an early sign of success in small-molecule activation. On the other hand, the existing reports on TM-aluminyl reactivity are often explained to readers with different understanding on individual cases, and a general picture of TM-aluminyl reactivity is still not available. In this work, we have attempted to provide a systematic picture to explain some early explorations in this field, specifically a series of recently reported heteroallene insertion reactions involving unsupported TM-aluminyl complexes. Through density functional theory calculations of a number of TM-aluminyl complexes, covering both Au and Cu centers, we found that their reactivity against heteroallenes (including CO₂ and carbodiimides) is mostly based on the strong nucleophilicity of the TM-Al σ-bond.

Dismutation of Tricyanoboryllead Compounds: The Homoleptic Tetrakis(tricyanoboryl)plumbate Tetraanion

A series of unprecedently air-stable (tricyanoboryl)plumbate anions was obtained by the reaction of the boron-centered nucleophile B(CN)3 2- with triorganyllead halides. Salts of the anions [R3 PbB(CN)3 ]- (R=Ph, Et) were isolated and found to be stable in air at room temperature. In the case of Me3 PbHal (Hal=Cl, Br), a mixture of the anions [Me4-n Pb{B(CN)3 }n ]n- (n=1, 2) was obtained. The [Et3 PbB(CN)3 ]- ion undergoes stepwise dismutation in aqueous solution to yield the plumbate anions [Et4-n Pb{B(CN)3 }n ]n- (n=1-4) and PbEt4 as by-product. The reaction rate increases with decreasing pH value of the aqueous solution or by bubbling O2 through the reaction mixture. Adjustment of the conditions allowed the selective formation and isolation of salts of all anions of the series [Et4-n Pb{B(CN)3 }n ]n- (n=2-4) including the homoleptic tetraanion [Pb{B(CN)3 }4 ]4- .

Selective, Transition Metal-free 1,2-Diboration of Alkyl Halides, Tosylates, and Alcohols

Defunctionalization of readily available feedstocks to provide alkenes for the synthesis of multifunctional molecules represents an extremely useful process in organic synthesis. Herein, we describe a transition metal-free, simple and efficient strategy to access alkyl 1,2-bis(boronate esters) via regio- and diastereoselective diboration of secondary and tertiary alkyl halides (Br, Cl, I), tosylates, and alcohols. Control experiments demonstrated that the key to this high reactivity and selectivity is the addition of a combination of potassium iodide and N,N-dimethylacetamide (DMA). The practicality and industrial potential of this transformation are demonstrated by its operational simplicity, wide functional group tolerance, and the late-stage modification of complex molecules. From a drug discovery perspective, this synthetic method offers control of the position of diversification and diastereoselectivity in complex ring scaffolds, which would be especially useful in a lead optimization program.

On the reactivity of Al-group 11 (Cu, Ag, Au) bonds

Reactions of the seven-membered heterocyclic potassium diamidoalumanyl, [K{Al(SiN^Dipp)}]₂ (SiN^Dipp = {CH₂SiMe₂NDipp}₂; Dipp = 2,6-di-isopropylphenyl), with a variety of Cu(I), Ag(I) and Au(I) chloride N-heterocyclic carbene (NHC) adducts are described. The resultant group 11-Al bonded derivatives have been characterised in solution by NMR spectroscopy and, in the case of [{SiN^Dipp}Al-Au(NHC^iPr)] (NHC^iPr = N,N'-di-isopropyl-4,5-dimethyl-2-ylidene), by single crystal X-ray diffraction. Although similar reactions of LAgCl and LAuCl, where L is a more basic cyclic alkyl amino carbene (CAAC), generally resulted in reduction of the group 11 cations to the base metals, X-ray analysis of [(^CyCAAC)AgAl(SiN^Dipp)] (^CyCAAC = 2-[2,6-bis(1-methylethyl)phenyl]-3,3-dimethyl-2-azaspiro[4.5]dec-1-ylidene) provides the first solid-state authentication of an Ag-Al σ bond. The reactivity of the NHC-supported Cu, Ag and Au alumanyl derivatives was assayed with the isoelectronic unsaturated small molecules, N,N'-di-isopropylcarbodiimide and CO₂. While these reactions generally provided products consistent with nucleophilic attack of the group 11 atom at the electrophilic heteroallene carbon centre, treatment of the NHC-supported copper and silver alumanyls with N,N'-di-isopropylcarbodiimide yielded less symmetric Cu-C and Ag-C-bonded isomers. In contrast to the previously described copper and silver alumanyl derivatives, [(NON)Al(O₂C)M(Pt-Bu₃)] (M = Cu or Ag; NON = 4,5-bis(2,6-di-isopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene), which were prone to facile CO extrusion and formation of carbonate derivatives, the NHC-supported dioxocarbene species, [(NHC^iPr)M(CO₂)Al(SiN^Dipp)] (M = Cu, Ag, Au), are all stable at room and moderately elevated temperatures. The stabilising role of the NHC co-ligand was, thus, assessed by preparation of the t-Bu₃P adducted copper-alumanyl, [(t-Bu₃P)CuAl(SiN^Dipp)]. Treatment of this latter compound, which was also structurally characterised by X-ray analysis, with both N,N'-di-isopropylcarbodiimide and CO₂ again provided smooth heteroallene insertion and formation of the relevant Cu-C-bonded products. Although both compounds were quite stable at room temperature, heating of [(t-Bu₃P)Cu(CO₂)Al(SiN^Dipp)] at 60 °C induced elimination of CO and formation of the analogous carbonate, [(t-Bu₃P)Cu(OCO₂)Al(SiN^Dipp)], which was identified by ¹³C and ³¹P NMR spectroscopy. Reflective of the more reliable nucleophilic behaviour of the gold centres in these group 11 alumanyls, computational (QTAIM and NBO) analysis highlighted a lower level of covalency of the Al-Au linkage in comparison to the analogous Al-Cu and Al-Ag interactions. Although substitution of the co-ligand significantly perturbs the charge distribution across the Cu-Al bond of [LCuAl(SiN^Dipp)] (L = NHC^iPr or t-Bu₃P), only a negligible difference is observed between the phosphine-coordinated copper systems derived from either the [SiN^Dipp]- or (NON)-based alumanyl ligands. Computational mapping of the reaction profiles arising from treatment of the various group 11 alumanyls with N,N'-di-isopropylcarbodiimide indicates that the observed formation of the Cu-N and Ag-N bound isomers do not provide the thermodynamic reaction outcome. In contrast, examination of the CO₂-derived reactions, and their potential toward CO extrusion and subsequent carbonate formation, implies that the identity of the co-ligand exerts a greater influence on this aspect of reactivity than the architecture of the diamidoalumanyl anion.

Base-Mediated Radical Borylation of Alkyl Sulfones

A practical and direct method was developed for the production of versatile alkyl boronate esters via transition metal-free borylation of primary and secondary alkyl sulfones. The key to the success of the strategy is the use of bis(neopentyl glycolato) diboron (B2 neop2 ), with a stoichiometric amount of base as a promoter. The practicality and industrial potential of this protocol are highlighted by its wide functional group tolerance, the late-stage modification of complex compounds, no need for further transesterification, and operational simplicity. Radical clock, radical trap experiments, and EPR studies were conducted which show that the borylation process involves radical intermediates.

Diboration of alkenes and alkynes with a carborane-fused four-membered boracycle bearing an electron-precise B-B bond

Small ring compounds are fascinating molecules and have been used as valuable compounds in organic synthesis. In this study, a carborane-fused four-membered boracycle bearing an electron precise B-B bond, 1,2-[BBrSMe₂]₂-o-C₂B₁₀H₁₀, was synthesized via the reaction of 1,2-Li₂-o-carborane with B₂Br₄(SMe₂)₂. This novel boracycle can be used as a "strain-release" compound to achieve diboration of alkenes and alkynes, leading to the generation of ring-expansion products. Interestingly, when bis(trimethylsilyl) acetylene was employed, an allene-functionalized six-membered boracycle was obtained. Moreover, DFT calculations were conducted to shed light on the reaction mechanism.

Trans Influence of Boryl Ligands in CO2 Hydrogenation on Ruthenium Complexes: Theoretical Prediction of Highly Active Catalysts for CO2 Reduction

In this work, we study the trans influence of boryl ligands and other commonly used non-boryl ligands in order to search for a more active catalyst than the ruthenium dihydride complex Ru(PNP)(CO)H2 for the hydrogenation of CO2. The theoretical calculation results show that only the B ligands exhibit a stronger trans influence than the hydride ligand and are along increasing order of trans influence as follows: –H < –BBr2 < –BCl2 ≈ –B(OCH)2 < –Bcat < –B(OCH2)2 ≈ –B(OH)2 < –Bpin < –B(NHCH2)2 < –B(OCH3)2 < –B(CH3)2 < –BH2. The computed activation free energy for the direct hydride addition to CO2 and the NBO analysis of the property of the Ru–H bond indicate that the activity of the hydride can be enhanced by the strong trans influence of the B ligands through the change in the Ru–H bond property. The function of the strong trans influence of B ligands is to decrease the d orbital component of Ru in the Ru–H bond. The design of a more active catalyst than the Ru(PNP)(CO)H2 complex is possible.

First-Row d-Block Element-Catalyzed Carbon-Boron Bond Formation and Related Processes

Organoboron reagents represent a unique class of compounds because of their utility in modern synthetic organic chemistry, often affording unprecedented reactivity. The transformation of the carbon-boron bond into a carbon-X (X = C, N, and O) bond in a stereocontrolled fashion has become invaluable in medicinal chemistry, agrochemistry, and natural products chemistry as well as materials science. Over the past decade, first-row d-block transition metals have become increasingly widely used as catalysts for the formation of a carbon-boron bond, a transformation traditionally catalyzed by expensive precious metals. This recent focus on alternative transition metals has enabled growth in fundamental methods in organoboron chemistry. This review surveys the current state-of-the-art in the use of first-row d-block element-based catalysts for the formation of carbon-boron bonds.

Nickel-Catalyzed Dearomative Arylboration of Indoles: Regioselective Synthesis of C2- and C3-Borylated Indolines

Indole dearomatization is an important strategy to access indolines: a motif present in a variety of natural products and biologically active molecules. Herein, a method for transition-metal catalyzed regioselective dearomative arylboration of indoles to generate diverse indolines is presented. The method accomplishes intermolecular dearomatization of simple indoles through a migratory insertion pathway on substrates that lack activating or directing groups on the C2- or C3-positions. Synthetically useful C2- and C3-borylated indolines can be accessed through a simple change in N-protecting group in high regio- and diastereoselectivities (up to >40:1 rr and >40:1 dr) from readily available starting materials. Additionally, the origin of regioselectivity was explored experimentally and computationally to uncover the remarkable interplay between carbonyl orientation of the N-protecting group on indole, electronics of the C2-C3 π-bond, and sterics. The method enabled the first enantioselective synthesis of (-)-azamedicarpin.

Mechanistic Insights into Activation of Carbon Monoxide, Carbon Dioxide, and Nitrous Oxide by Acyclic Silylene

Owing to an empty p orbital and a lone pair of electrons on the Si center, silylene exhibits reactivity similar to a transition-metal system capable of activating H₂/C-H bonds and small molecules. In this work, with the aid of density functional theory calculations, we systematically investigated the reactions of an acyclic silylene with CO, CO₂, and N₂O. The detailed mechanisms obtained lead to an in-depth understanding of the silylene single-site ambiphilic reactivity.

Rational design of the nickel-borane complex for efficient hydrogenation of styrene

The Ni-B complex 1^BCF with a facilely accessible monophosphine (P^t Bu₃ ) unit was theoretically designed, which was found to be more active than that with an ambiphilic ligand for hydrogenation of styrene. Substituting P^t Bu₃ with a stronger electron donating ligand N-heterocyclic carbene largely improves the activity of the Ni-B complex.

Perspective on Organoboron Chemistry

Organoboron compounds play prominent roles in structural, synthetic, and materials chemistry because boron atoms can feature electrophilic, ambiphilic, or nucleophilic character. This perspective briefly describes the most recent progress in organoboron chemistry, focusing on new boron molecules and their applications that have attracted great interest from main-group chemists. The research hotspots arising from these pioneering results are also discussed.

1 Introduction

2 Diboron Reagents

3 Boryl Anions

4 Borylenes

5 Nucleophilic or Ambiphilic Boron-Containing N-Heterocycles

6 Conclusions and Outlook

Photoinduced Borylation for the Synthesis of Organoboron Compounds

Organoboron compounds have important synthetic value and can be applied in numerous transformations. The development of practical and convenient ways to synthesize boronate esters has thus attracted significant interest. Photoinduced borylations originated from stoichiometric reactions of alkanes and arenes with well-defined metal-boryl complexes. Now, photoredox-initiated borylations, catalyzed by either transition metal or organic photocatalysts, and photochemical borylations with high efficiency have become a burgeoning area of research. In this Focus Review, we summarize research on photoinduced borylations, especially emphasizing recent developments and trends. This includes the photoinduced borylation of arenes, alkanes, aryl/alkyl halides, activated carboxylic acids, amines, alcohols, and so on based on transition metal catalysis, metal-free organocatalysis, and direct photochemical activation. We focus on reaction mechanisms involving single-electron transfer, triplet-energy transfer, and other radical processes.

Stability and decomposition of copper(i) boryl complexes: [(IDipp)Cu–Bneop], [(IDipp*)Cu–Bneop] and copper clusters

Synthesis and characterisation of NHC copper boryl complexes [(NHC)Cu–Bneop] and their decomposition to low-valent copper clusters.

Understanding the insertion reactions of CO2, aldehyde and alkene into Cu–X (X = B, C, O) bonds

The relative preference of different unsaturated organic molecules (CO2, PhCHO and styrene) for insertion into different Cu–X (X = B, C, O) bonds has been systematically examined with the aid of DFT calculations.

Nucleophilic reactivity of the gold atom in a diarylborylgold(i) complex toward polar multiple bonds

A di(o-tolyl)borylgold complex was synthesized via the metathesis reaction of a gold alkoxide with tetra(o-tolyl)diborane(4). The resulting diarylborylgold complex exhibited a Lewis acidic boron center and a characteristic visible absorption that arises from its HOMO-LUMO excitation, which is narrower than that of a previously reported dioxyborylgold complex. The diarylborylgold complex reacted with isocyanide in a stepwise fashion to afford single- and double-insertion products and a C-C coupled product. Reactions of this diarylborylgold complex with C[double bond, length as m-dash]O/N double bond species furnished addition products under concomitant formation of Au-C and B-O/N bonds, which suggests nucleophilic reactivity of the gold metal center. DFT calculations provided details of the underlying reaction mechanism, which involves an initial coordination of the C[double bond, length as m-dash]O/N bond to the boron vacant p-orbital of the diarylboryl ligand followed by a migration of the gold atom from the tetracoordinate sp3-hybridized boron center, which is analogous to the reactivity of the conventional sp3-hybridized borate species. The DFT calculations also suggested a stepwise mechanism for the reaction of this diarylborylgold complex with isocyanide, which afforded three different reaction products depending on the applied reaction conditions.

Synthesis and structures of anionic rhenium polyhydride complexes of boron-hydride ligands and their application in catalysis

The rhenium complex, [K(DME)(18-c-6)][ReH₄(Bpin)(η²-HBpin)(κ²-H₂Bpin)] 1, comprising hydride and boron ligands only, has been synthesized by exhaustive deoxygenation of the commercially available perrhenate anion (ReO₄ ^-) with pinacol borane (HBpin). The structure of 1 was analysed by X-ray crystallography, NMR spectroscopy, and DFT calculations. While no hydrides were located in the X-ray crystal structure, it revealed a trigonal arrangement of pinacol boron ligands. Variable-temperature NMR spectroscopy supported the presence of seven hydride ligands but further insight was hindered by the fluxionality of both hydride and boron ligands at low temperature. Further evaluation of the structure by Ab Initio Random Structure Searching (AIRSS) identified the presence of hydride, boryl, σ-borane, and dihydroborate ligands. This complex, either isolated or prepared in situ, is a catalyst for the 1,4-hydroboration of N-heteroaromatic substrates under simple operating procedures. It also acts as a reagent for the stoichiometric C-H borylation of toluene, displaying high meta regioselectivity in the borylated products. Reaction of 1 with 9-BBN resulted in HBpin substitution to form the new anionic tetra(dihydroborate) complex [K(DME)(18-c-6)][Re(κ²-H-9-BBN)₄] 4 for which the hydride positions were clearly identified by X-ray crystallography. The method used to generate these isolable yet reactive boron-hydride complexes is direct and straightforward and has potential utility for the exploitation of other metal oxo compounds in operationally simple catalytic reactions.

Methodologies and Strategies for Selective Borylation of C-Het and C-C Bonds

Organoborons have emerged as versatile building blocks in organic synthesis to achieve molecular diversity and as carboxylic acid bioisosteres with broad applicability in drug discovery. Traditionally, these compounds are prepared by the substitution of Grignard/lithium reagents with electrophilic boron species and Brown hydroboration. Recent developments have provided new routes for the efficient preparation of organoborons by applying reactions using chemical feedstocks with leaving groups. As compared to the previous methods that used organic halides (I, Br, and Cl), the direct borylation of less reactive C-Het and C-C bonds has become highly important to get efficiency and functional-group compatibility. This Review aims to provide a comprehensive overview of this topic, including (1) C-F bond borylation, (2) C-O bond borylation, (3) C-S bond borylation, (4) C-N bond borylation, and (5) C-C bond borylation. Considerable attention is given to the strategies and mechanisms involved. We expect that this Review will inspire chemists to discover more efficient transformations to expand this field.

Enantio- and diastereoselective conjugate borylation/Mannich cyclization

Strategies to capitalize on enolate intermediates generated from stereoselective conjugate borylation to α,β-unsaturated carbonyl systems are surprisingly rare despite the ubiquity of Michael acceptors, and the potential to generate valuable scaffolds bearing multiple stereocenters. Herein, we report a mild and stereoselective copper-catalyzed conjugate borylation/Mannich cyclization reaction. This strategy is feasible with a broad range of Michael acceptors, and can be leveraged to generate versatile borylated tetrahydroquinoline scaffolds bearing three contiguous stereocenters. The synthetic potential of these complex heterocycles has been explored through a series of derivatization studies.

Copper-catalyzed enantio- and diastereoselective conjugate borylation across Michael acceptors, with subsequent Mannich-type cyclization, was utilized to construct tetrahydroquinoline scaffolds containing three contiguous stereocenters.

Iridium-Catalyzed γ-Selective Hydroboration of γ-Substituted Allylic Amides

Reported here for the first time is the Ir-catalyzed γ-selective hydroboration of γ-substituted allylic amides under mild reaction conditions. A variety of functional groups could be compatible with reaction conditions, affording γ-branched amides in good yields with ≤97% γ-selectivity. We have also demonstrated that the obtained borylated products could be used in a series of C-O, C-F, C-Br, and C-C bond-forming reactions.