Quantum dot-based DNA hybridization by electrochemiluminescence and anodic stripping voltammetry

Electrochemical DNA Biosensors Based on Labeling with Nanoparticles

This work reviews the field of DNA biosensors based on electrochemical determination of nanoparticle labels. These labeling platforms contain the attachment of metal nanoparticles (NPs) or quantum dots (QDs) on the target DNA or on a biorecognition reporting probe. Following the development of DNA bioassay, the nanotags are oxidized to ions, which are determined by voltammetric methods, such as pulse voltammetry (PV) and stripping voltammetry (SV). The synergistic effects of NPs amplification (as each nanoprobe releases a large number of detectable ions) and the inherent sensitivity of voltammetric techniques (e.g., thanks to the preconcentration step of SV) leads to the construction of ultrasensitive, low cost, miniaturized, and integrated biodevices. This review focuses on accomplishments in DNA sensing using voltammetric determination of nanotags (such as gold and silver NPs, and Cd- and Pb-based QDs), includes published works on integrated three electrode biodevices and paper-based biosystems, and discusses strategies for multiplex DNA assays and signal enhancement procedures. Besides, this review mentions the electroactive NP synthesis procedures and their conjugation protocols with biomolecules that enable their function as labels in DNA electrochemical biosensors.

Quantum dot-based electrochemical biosensor for stripping voltammetric detection of telomerase at the single-cell level

Human telomerase is responsible for the maintenance of chromosome end structures and is a valuable biomarker for malignant growth. However, the accurate measurement of telomerase activity at the single-cell level has remained a great challenge. Here we develop a simple quantum dot (QD)-based electrochemical biosensor for stripping voltammetric detection of telomerase activity at the single-cell level. We designed a thiol-modified capture DNA which may be immobilized on the gold electrode by the gold-sulfur bond. The presence of telomerase enables the addition of the telomere repeats of (TTAGGG)_n to the 3' end of the primer, accompanied by the incorporation of abundant biotins in the extension product with the assistance of the biotin-tagged dATP. The subsequent hybridization of extension product with the capture DNA and the addition of streptavidin-coated QDs induce the assembly of large amounts of QDs onto the electrode via specific biotin-streptavidin binding. After the acidic dissolution of QDs, the released Cd (II) can be simply quantified by anodic stripping voltammetry (ASV). Due to the introduction of large amounts of QDs by telomerase-induced primer extension reaction and the synergistic signal amplification induced by the release of Cd (II) from the QDs, this biosensor can detect telomerase activity at the single-cell level without the involvement of any thermal cycling and extra enzymes for signal amplification. Moreover, this assay exhibits a large dynamic range over four orders of magnitude and it is very simple without the involvement of specific hairpin probe design and complicated labelling, holding great potential in point-of-need testing.

Electrochromic Sensor for Multiplex Detection of Metabolites Enabled by Closed Bipolar Electrode Coupling

Biosensors based on converting electrochemical signals into optical readouts are attractive candidates as low-cost, high-throughput sensor platforms. Here, we described a closed bipolar electrode (CBE)-based two-cell electrochromic device for sensing multiple metabolites, using the simultaneous detection of lactate, glucose, and uric acid as a model system. In the two-cell configuration, an analytical cell contains a redox mediator combined with a specific oxidase, e.g., lactate oxidase, glucose oxidase, or uricase, to form an electrochemical mediator-electrocatalyst pair that supports redox cycling. A closed bipolar electrode couples the electron transfer event in the analytical cell to an electrochromic reaction in a separate reporter cell, such that the magnitude of the color change is related to the concentration of metabolites in the analytical cell. To demonstrate multiplex operation, the CBE-based electrochromic detector is modified by integrating three sets of detection chemistries into a single device, in which simultaneous determination of glucose, lactate, and uric acid is demonstrated. Device sensitivity can be tuned by using reporter cells with different volumes. Furthermore, the analytical cell of this device can be fabricated as a disposable, paper-based carbon electrode without any pretreatment, demonstrating the potential to screen phenotypes that require multiple biomarkers in a point-of-care format.

Ultraselective electrochemiluminescence biosensor based on locked nucleic acid modified toehold-mediated strand displacement reaction and junction-probe

Locked nucleic acid (LNA) is applied in toehold-mediated strand displacement reaction (TMSDR) to develop a junction-probe electrochemiluminescence (ECL) biosensor for single-nucleotide polymorphism (SNP) detection in the BRCA1 gene related to breast cancer. More than 65-fold signal difference can be observed with perfectly matched target sequence to single-base mismatched sequence under the same conditions, indicating good selectivity of the ECL biosensor.

Construction of dentate bonded TiO2–CdSe heterostructures with enhanced photoelectrochemical properties: versatile labels toward photoelectrochemical and electrochemical sensing

TiO₂–CdSe heterostructures with enhanced photoelectrochemical properties were prepared and used as versatile labels toward photoelectrochemical and electrochemical biosensing.

Flexible microfabricated film sensors for the in situ quantum dot-based voltammetric detection of DNA hybridization in microwells

A new flexible miniaturized integrated device was microfabricated for the in situ ultrasensitive voltammetric determination of DNA mutation in a microwell format, using quantum dots (QDs) labels. The integrated device consisted of thin Bi, Ag, and Pt films (serving as the working, reference, and counter electrode, respectively) deposited by sputtering on a flexible polyimide substrate. A DNA assay was employed in microwell format, where an immobilized complementary oligonucleotide probe hybridized with the biotinylated target oligonucleotide followed by reaction with streptavidin-conjugated PbS QDs. After the acidic dissolution of the QDs, the flexible sensor was rolled and inserted into the microwell and the Pb(II) released was determined in situ by anodic stripping voltammetry. Since the analysis took place directly in the microwell, the volume of the working solution was only 100 μL and the target DNA could be detected at a concentration down to 1.1 fmol L(-1). The proposed flexible microdevice addresses the restrictions of conventional rigid electrodes while it provides a low cost integrated transducer for the ultrasensitive detection of important biomolecules.

Evaluating Atmospheric pressure Solids Analysis Probe (ASAP) mass spectrometry for the analysis of low molecular weight synthetic polymers

Atmospheric pressure Solids Analysis Probe (ASAP) mass spectrometry has facilitated the ionisation of oligomers from low molecular weight synthetic polymers, poly(ethylene glycol) (PEG: M(n) = 1430) and poly(styrene) (PS: M(n) = 1770), directly from solids, providing a fast and efficient method of identification. Ion source conditions were evaluated and it was found that the key instrument parameter was the ion source desolvation temperature which, when set to 600 °C was sufficient to vapourise the heavier oligomers for ionisation. PS, a non-polar polymer that is very challenging to analyse by MALDI or ESI without the aid of metal salts to promote cationisation, was ionised promptly by ASAP resulting in the production of radical cations. A small degree of in-source dissociation could be eliminated by control of the instrument ion source voltages. The fragmentation observed through in-source dissociation could be duplicated in a controlled manner through Collision-Induced Dissociation (CID) of the radical cations. PEG, which preferentially ionises through adduction with alkali metal cations in MALDI and ESI, was observed as a protonated molecular ion by ASAP. In-source dissociation could not be eliminated entirely and the fragmentation observed resulted from cleavage of the C-C and C-O backbone bonds, as opposed to only C-O bond cleavage observed from tandem mass spectrometry.

Photoelectrochemical competitive DNA hybridization assay using semiconductor quantum dot conjugated oligonucleotides

A competitive DNA hybridization assay based on the photoelectrochemistry of the semiconductor quantum dot-single stranded DNA conjugates (QD-ssDNA) was developed. Hybridization of QD-ssDNA with the capture probe DNA immobilized on the indium-tin oxide electrodes enables photocurrent generation when the electrochemical cell was illuminated with a light source. Upon the competition between QD-ssDNA and single-stranded target DNA, the photocurrent response decreased with the increase in the target DNA concentration. A linear relationship between the photocurrent and the target DNA concentration was obtained (R(2) = 0.991). The selectivity of system towards the target DNA was also demonstrated using non-complementary sample.

Nanoparticles in molecular diagnostics

The aim of this chapter is to provide an overview of the available and emerging molecular diagnostic methods that take advantage of the unique nanoscale properties of nanoparticles (NPs) to increase the sensitivity, detection capabilities, ease of operation, and portability of the biodetection assemblies. The focus will be on noble metal NPs, especially gold NPs, fluorescent NPs, especially quantum dots, and magnetic NPs, the three main players in the development of probes for biological sensing. The chapter is divided into four sections: a first section covering the unique physicochemical properties of NPs of relevance for their utilization in molecular diagnostics; the second section dedicated to applications of NPs in molecular diagnostics by nucleic acid detection; and the third section with major applications of NPs in the area of immunoassays. Finally, a concluding section highlights the most promising advances in the area and presents future perspectives.

Highly sensitive electrochemiluminescent biosensor for adenosine based on structure-switching of aptamer

A highly sensitive and selective electrochemiluminescent (ECL) biosensor for the determination of adenosine was developed. Single DNA (capture DNA) was immobilized on the gold electrode through Au-thiol interaction at first. Another DNA modified with tris(2,2'-bipyridyl) ruthenium(II)-doped silica nanoparticles (Ru-SNPs) that contained adenosine aptamer was then modified on the electrode surface through hybridizing with the capture DNA. In the presence of adenosine, adenosine-aptamer complex is produced rather than aptamer-DNA duplex, resulting with the dissociation of Ru-SNPs-labeled aptamer from the electrode surface and the decrease in the ECL intensity. The decrease of ECL intensity has a direct relationship with the logarithm of adenosine concentration in the range of 1.0×10(-10) to 5.0×10(-6)molL(-1). The detection limit of the proposed method is 3.0×10(-11)molL(-1). The existence of guanosine, cytidine and uridine has little interference with adenosine detection, demonstrating that the developed biosensor owns a high selectivity to adenosine. In addition, the developed biosensor also demonstrates very good reusability, as after being reused for 30 times, its ECL signal still keeps 91% of its original state.