Advances in selective conversions by heterogeneous photocatalysis

Enhanced Charge Transfer via S-Scheme Heterojunction Interface Engineering of Supramolecular SubPc-Br/UiO-66 Arrays for Efficient Photocatalytic Oxidation

Constructing heterojunction of supramolecular arrays self-assembled on metal-organic frameworks (MOFs) with elaborate charge transfer mechanisms is a promising strategy for the photocatalytic oxidation of organic pollutants. Herein, H12 SubPcB-Br (SubPc-Br) and UiO-66 are used to obtain the step-scheme (S-scheme) heterojunction SubPc-Br/UiO-66 for the first time, which is then applied in the photocatalytic oxidation of minocycline. Atomic-level B-O-Zr charge-transfer channels and van der Waals force connections synergistically accelerated the charge transfer at the interface of the SubPc-Br/UiO-66 heterojunction, while the establishment of the B-O-Zr bonds also led to the directional transfer of charge from SubPc-Br to UiO-66. The synergy is the key to improving the photocatalytic activity and stability of SubPc-Br/UiO-66, which is also verified by various characterization methods and theoretical calculations. The minocycline degradation efficiency of supramolecular SubPc-Br/UiO-66 arrays reach 90.9% within 30 min under visible light irradiation. The molecular dynamics simulations indicate that B-O-Zr bonds and van der Waals force contribute significantly to the stability of the SubPc-Br/UiO-66 heterojunction. This work reveals an approach for the rational design of semiconducting MOF-based heterojunctions with improved properties.

Partial Chemicalization of Nanoscale Metals: An Intra-Material Transformative Approach for the Synthesis of Functional Colloidal Metal-Semiconductor Nanoheterostructures

Heterostructuring colloidal nanocrystals into multicomponent modular constructs, where domains of distinct metal and semiconductor phases are interconnected through bonding interfaces, is a consolidated approach to advanced breeds of solution-processable hybrid nanomaterials capable of expressing richly tunable and even entirely novel physical-chemical properties and functionalities. To meet the challenges posed by the wet-chemical synthesis of metal-semiconductor nanoheterostructures and to overcome some intrinsic limitations of available protocols, innovative transformative routes, based on the paradigm of partial chemicalization, have recently been devised within the framework of the standard seeded-growth scheme. These techniques involve regiospecific replacement reactions on preformed nanocrystal substrates, thus holding great synthetic potential for programmable configurational diversification. This review article illustrates achievements so far made in the elaboration of metal-semiconductor nanoheterostructures with tailored arrangements of their component modules by means of conversion pathways that leverage on spatially controlled partial chemicalization of mono- and bi-metallic seeds. The advantages and limitations of these approaches are discussed within the context of the most plausible mechanisms underlying the evolution of the nanoheterostructures in liquid media. Representative physical-chemical properties and applications of chemicalization-derived metal-semiconductor nanoheterostructures are emphasized. Finally, prospects for developments in the field are outlined.

Synergy of Surface Phosphates and Oxygen Vacancies Enables Efficient Photocatalytic Methane Conversion at Room Temperature

Room-temperature photocatalytic conversion of CH₄ into liquid oxygenates with O₂/H₂O provides an appealing route for sustainable chemical industry, which, however, suffers from poor efficiency due to the undesired carrier kinetics and low yield of reactive oxygen species of the currently available photocatalysts. Here, we report an effective surface engineering strategy where concurrent constructions of oxygen vacancies and phosphate sites on TiO₂ nanosheets address the above challenge. The surface oxygen vacancies and phosphates are respective acceptors of photogenerated electrons and holes for promoted separation and migration of charge carriers. Moreover, in addition to the facilitated activation of O₂ to ^•OH by electrons at oxygen vacancies, the surface phosphates also facilely adsorb H₂O via hydrogen bonds and thus effectively transfer holes to H₂O for enhanced ^•OH production, thereby boosting CH₄ conversion. As a result, compared with TiO₂ sheets with only oxygen vacancies, a 2.8 times improvement in liquid oxygenate production with near-unity selectivity is achieved by virtue of the synergy of surface oxygen vacancies and phosphate sites, together with an unprecedent quantum efficiency of 19.8% under 365 nm irradiation.

Combination of Zinc Oxide Photocatalysis with Membrane Filtration for Surface Water Disinfection

Increase water usage has led to its deterioration. Pollutants are easily found in the aquatic environment and treatment techniques must keep improving to meet the current needs and future demands. Membranes are attractive for water treatment, but limitations like fouling and the highly concentrate produced affect their performance. Combining membrane filtration with photocatalysis provides the opportunity to integrate a self-cleaning step during membrane filtration. In this work, we studied two simple and efficient approaches to combine membrane filtration with zinc oxide nanoparticles (using the catalyst in suspension and immobilized) activated by light emitting diodes (LED) emitting light at 365 nm. Both systems were used to test the disinfection efficiency in real surface water, compared in terms of catalyst concentration in the permeate stream (below the limit of detection) and its recovery after filtration (higher that 74%). The system's capability to retain and inactivate target bacteria (total coliforms and E. coli) in the retentate stream was tested with samples of real surface water. The results obtained show that both configurations led to an improved performance in comparison to the membrane treatment alone with a higher retention of the bacteria (not detected in the permeate samples) and higher treatment of the retentate. For the modified membranes, different catalyst concentrations and thermal treatments were tested. The performance of all the processes was evaluated in terms of the level of treatment achieved and the permeate flux. All the modified membranes showed an efficient retention of the target bacteria from surface water, with higher performances than the unmodified membrane (96.2% for total coliforms and 94.9% for E. coli). Remarkable retention and treatment of the retentate was achieved using a membrane modified with a catalyst load of 125 mg subject during two hours to a thermal treatment of 300 °C. This modification has a performance comparable to the system with the same catalyst load in suspension. During operation, the permeate flux reduction is lower with the modified membranes which could lead to longer operation times without the need of further cleaning or replacement. The combined system, ceramic membranes modified with zinc oxide and UV-A LEDs proved to be effective to retain and disinfect water quality indicator bacteria present in real surface water matrices.

Coffee-waste templated CeOx/TiO2 nanostructured materials for selective photocatalytic oxidations

An environmentally friendly solvent-free approach was tested using spent coffee as a biomass sacrificial template for the preparation of TiO₂ modified with CeO_x. The use of coffee as a template pursues the preparation of a nanostructured heterojunction without the need for a solvent. Two variables were optimized in the synthesis process, i.e. calcination temperature and proportion of CeO_x. Firstly, bare coffee-template titania was prepared to explore the effect of the calcination temperature, within 500-650 °C. The anatase phase was obtained up to 600 °C. Higher temperatures, i.e. 650 °C, led to the appearance of rutile (10%) and efficient removal of the sacrificial agent (0.6% residue). The maximum photocatalytic activity in terms of conversion, in the oxidation of benzyl alcohol, was achieved employing the bare coffee-template TiO₂ at 650 °C, and it was found comparable to the benchmarked P25. The incorporation of ceria in the solvent-free approach considerably improved photocatalytic benzaldehyde production. No changes in the XRD pattern of TiO₂ were appreciated in the presence of ceria due to the low amount added, within 1.5-6.0%, confirmed by XPS as superficial Ce³⁺/Ce⁴⁺. The UV-visible absorption spectra were considerably redshifted in the presence of Ce, reducing the bandgap values of bare titania. An optimum amount of ceria in the structure within 3-0% was found. In this case, the selectivity towards benzaldehyde was ca. 75%, 3 times higher than the selectivity value registered for the benchmarked P25 or the bare prepared TiO₂.

2D XBiSe3(X = Ga, In, Tl) monolayers with high carrier mobility and enhanced visible-light absorption

The geometrical configurations of the XBiSe₃ (X = Ga, In, Tl) monolayers are identified by employing the first-principles density functional theory calculations, and the stabilities are confirmed by phonon dispersion, formation energy, and ab initio molecular dynamics simulation, respectively. The bandgap and band edges, the density of states, the optical absorption, mobility, and effect of strain engineering are evaluated to understand the photoelectronic properties of the monolayers. The results show that the XBiSe₃ monolayers have the indirect bandgaps of 1.14-1.69 (1.20-1.84) eV by HSE06(GW), leading to the enhanced optical absorption from the visible to near-ultraviolet region. The large mobility of the electron and hole are also observed, which is helpful for the separation and transfer of the photogenerated carrier pair. The band edges and bandgaps, as well as the optical absorptions, can effectively be tuned by strain engineering. It should be noted that the band edges of the InBiSe₃ monolayer could satisfy the condition of redox potential for the hydrogen evolution reaction under the compressive strain heavier than -3%, implicating this monolayer can also be used for photocatalytic water splitting to produce hydrogen. Therefore, these monolayers have potential applications in photocatalytic materials or photoelectronic devices such as energy harvesters and visible-light sensors.

Continuous flow technology-a tool for safer oxidation chemistry

The advantages and benefits of continuous flow technology for oxidation chemistry have been illustrated in tube reactors, micro-channel reactors, tube-in-tube reactors and micro-packed bed reactors in the presence of various oxidants.

Facile synthesis of a nano titanium catalyst and its performance in selective oxidation of aromatic and pyridinic alcohols under visible light

The oxidation of alcohols to the corresponding carbonyl compounds is of great significance in chemical synthesis and fine chemical production.

Cooperative Photocatalysis with 4-Amino-TEMPO for Selective Aerobic Oxidation of Amines over TiO2 Nanotubes

Attaching π-conjugated molecules onto TiO₂ can form surface complexes that could capture visible light. However, to make these TiO₂ surface complexes durable, integrating 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) or its analogues as a redox mediator with photocatalysis is the key to constructing selective chemical transformations. Herein, sodium 6,7-dihydroxynaphthalene-2-sulfonate (DHNS) was obtained by extending the π-conjugated system of catechol by adding a benzene ring and a substituent sodium sulfonate (-SO₃ ^- Na⁺ ). The DHNS-TiO₂ showed the best photocatalytic activity towards the blue light-induced selective aerobic oxidation of benzylamine. Compared to TEMPO, 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl (4-amino-TEMPO) could rise above 70% in conversion of benzylamine over the DHNS-TiO₂ photocatalyst. Eventually, a wide range of amines could be selectively oxidized into imines with atmospheric O₂ by cooperative photocatalysis of DHNS-TiO₂ with 4-amino-TEMPO. Notably, superoxide (O₂ ^•- ) is crucial in coupling the photocatalytic cycle of DHNS-TiO₂ and the redox cycle of 4-amino-TEMPO. This work underscores the design of surface ligands for semiconductors and the selection of a redox mediator in visible light photocatalysis for selective chemical transformations.

The Evolution of Photocatalytic Membrane Reactors over the Last 20 Years: A State of the Art Perspective

The research on photocatalytic membrane reactors (PMRs) started around the year 2000 with the study of wastewater treatment by degradation reactions of recalcitrant organic pollutants, and since then the evolution of our scientific knowledge has increased significantly, broadening interest in reactions such as the synthesis of organic chemicals. In this paper, we focus on some initial problems and how they have been solved/reduced over time to improve the performance of processes in PMRs. Some know-how gained during these last two decades of research concerns decreasing/avoiding the degradation of the polymeric membranes, improving photocatalyst reuse, decreasing membrane fouling, enhancing visible light photocatalysts, and improving selectivity towards the reaction product(s) in synthesis reactions (partial oxidation and reduction). All these aspects are discussed in detail in this review. This technology seems quite mature in the case of water and wastewater treatment using submerged photocatalytic membrane reactors (SPMRs), while for applications concerning synthesis reactions, additional knowledge is required.

A powerful azomethine ylide route mediated by TiO2 photocatalysis for the preparation of polysubstituted imidazolidines

Lewis- and Brønsted-acid catalyzed 1,3-dipolar cycloaddition between azomethine ylides and unsaturated compounds is an important strategy to construct five-membered N-heterocycles. However, such a catalytic route usually demands substrates with an electron-withdrawing group (EWG) to facilitate the reactivity. Herein, we report a TiO2 photocatalysis strategy that can conveniently prepare five-membered N-heterocyclic imidazolidines from a common imine (N-benzylidenebenzylamine) and alcohols along the route of 1,3-dipolaron azomethine ylide but without pre-installed EWG substituents on the substrates. Our EPR results uncovered the previously unknown mutual interdependence between an azomethine ylide and TiO2 photo-induced hvb+/ecb- pair. This transformation exhibited a broad scope with 21 successful examples and could be scaled up to the gram level.

Selective oxidation of aromatic alcohols in the presence of C3N4 photocatalysts derived from the polycondensation of melamine, cyanuric and barbituric acids

A set of C3N4 samples has been prepared by using melamine, cyanuric acid and barbituric acid as the precursors. The materials were subjected both to physical and chemical characterization and were used as photocatalysts for the selective oxidation of aromatic alcohols in water suspension under UV and visible irradiation. The photoactivity of the materials versus the partial oxidation of four substituted benzyl alcohols was investigated. The type and position of the substituents in the aromatic molecule influenced conversion and selectivity to the corresponding aldehyde. The presence of barbituric and cyanuric acids in the preparation method has changed the graphitic-C3N4 structure, and therefore both the characteristics of the material and the ability of light to activate the surface of the photocatalyst. The most active material prepared in the presence of melamine and cyanuric acid showed a remarkable selectivity towards the aldehyde even under visible irradiation.

Cooperative TiO2 photocatalysis with TEMPO and N-hydroxysuccinimide for blue light-driven selective aerobic oxidation of amines

TiO₂ has been the focus of attention in semiconductor photocatalysis for several decades because it can potentially settle the grand energy and environmental issues with earth-abundant elements of Ti and O. However, because of its wide band gap, TiO₂ can only collect UV light, hindering its practical applications under the illumination of sunlight. In view of this, an interesting phenomenon of light-driven adsorption of amines onto TiO₂ to form a visible light-absorbing complex was adapted to assemble smart photocatalysis. The endurance of this complex was eminently refurbished by blue light-driven continuous adsorption of amines. This in turn promoted a vital selective chemical transformation, blue light-driven selective oxidation of amines into imines with atmospheric dioxygen (O₂). More importantly, the inclusion of TEMPO and N-hydroxysuccinimide (NHS) into the smart photocatalytic system could cooperatively expedite the blue light-driven selective aerobic oxidation of amines into imines through dual independent reaction channels, resembling that of enzymatic catalysis. This work underscores the importance of manoeuvring multiple reaction channels by cooperative photocatalysis during selective chemical transformations.

Selectivity control of organic chemical synthesis over plasmonic metal-based photocatalysts

The factors, issues, and design of plasmonic metal-based photocatalysts for selective photosynthesis of organic chemicals have been discussed.

Visible-Light Photocatalysts and Their Perspectives for Building Photocatalytic Membrane Reactors for Various Liquid Phase Chemical Conversions

Photocatalytic organic synthesis/conversions and water treatment under visible light are a challenging task to use renewable energy in chemical transformations. In this review a brief overview on the mainly employed visible light photocatalysts and a discussion on the problems and advantages of Vis-light versus UV-light irradiation is reported. Visible light photocatalysts in the photocatalytic conversion of CO2, conversion of acetophenone to phenylethanol, hydrogenation of nitro compounds, oxidation of cyclohexane, synthesis of vanillin and phenol, as well as hydrogen production and water treatment are discussed. Some applications of these photocatalysts in photocatalytic membrane reactors (PMRs) for carrying out organic synthesis, conversion and/or degradation of organic pollutants are reported. The described cases show that PMRs represent a promising green technology that could shift on applications of industrial interest using visible light (from Sun) active photocatalysts.

Turning Waste into Useful Products by Photocatalysis with Nanocrystalline TiO2 Thin Films: Reductive Cleavage of Azo Bond in the Presence of Aqueous Formate

UV-photoexcitation of TiO₂ in contact with aqueous solutions of azo dyes does not imply only its photocatalytic degradation, but the reaction fate of the dye depends on the experimental conditions. In fact, we demonstrate that the presence of sodium formate is the switch from a degradative pathway of the dye to its transformation into useful products. Laser flash photolysis experiments show that charge separation is extremely long lived in nanostructured TiO₂ thin films, making them suitable to drive both oxidation and reduction reactions. ESR spin trapping and photoluminescence experiments demonstrate that formate anions are very efficient in intercepting holes, thereby inhibiting OH radicals formation. Under these conditions, electrons promoted in the conduction band of TiO₂ and protons deriving from the oxidation of formate on photogenerated holes lead to the reductive cleavage of N=N bonds with formation and accumulation of reduced intermediates. Negative ion ESI–MS findings provide clear support to point out this new mechanism. This study provides a facile solution for realizing together wastewater purification and photocatalytic conversion of a waste (discharged dye) into useful products (such as sulfanilic acid used again for synthesis of new azo dyes). Moreover, the use of TiO₂ deposited on an FTO (Fluorine Tin Oxide) glass circumvents all the difficulties related to the use of slurries. The obtained photocatalyst is easy to handle and to recover and shows an excellent stability allowing complete recyclability.

Photocatalytic Conversion of Lignin into Chemicals and Fuels

Lignin, an underutilized component of lignocellulosic biomass, is regarded as a rich reservoir for the production of aromatic chemicals and fuels. Despite extensive research in recent years, lignin's potential is far from being fully unlocked. Photocatalysis that uses sustainable solar energy to drive lignin conversion under mild conditions has been identified as a promising strategy and received growing research interest. This review aims to present a critical introduction to the photocatalytic conversion of lignin, including a summary of lignin conversion pathways and mechanisms, as well as the latest cutting-edge innovations on photocatalyst design and reactor construction. Moreover, the screening of solvents and regulation of other key factors that are involved in photocatalytic lignin conversion are also elucidated and future perspectives and challenges for photocatalytic conversion of lignin into valuable products are discussed.

One pot solvent assisted syntheses of Ag3SbS3 nanocrystals and exploring their phase dependent electrochemical behavior toward oxygen reduction reaction and visible light induced methanol oxidation reaction

A huge variety of silver based ternary sulfide semiconductors (SCs) have been considered for the sustainable advancement of renewable energy sources. Herein, we have synthesized two important classes of newly emerging semiconductor nanocrystals (NCs) Ag3SbS3 (SAS), i.e. hexagonal and monoclinic by simply tuning the solvent polarity, of which the second one has been synthesized in a phase pure NC for the first time by the thermal decomposition of silver and antimony based dithiocarbamate (∼N-CS2-M) complexes. Interestingly, these two systems exhibit two different semiconducting (SC) properties and band gaps; hexagonal SAS has a p type (Eg ∼ 1.65 eV) whereas monoclinic SAS has an n type (Eg ∼ 2.1 eV) character. For the first time ever we have designed a reducing working electrode (i.e. cathode) by modifying the rotating disc electrode (RDE) with hexagonal SAS that exhibits excellent electrochemical oxygen reduction reaction (ORR) activity (Eonset = 1.09 V vs. RHE and average number of electron transfer: 3.89) comparable to that of the highly expensive Pt/C (Eonset = 0.88 V vs. RHE and average number of electron transfer: 3.92). Density functional theory (DFT) investigation confirms the corroborations of experimental data with theoretical implications. In addition, the electrode fabricated from monoclinic SAS acts as an efficient photoanode which exhibits higher photoelectrochemical (PEC) methanol oxidation reaction (MOR) activity under illumination in alkaline medium compared to that of standard TiO2 grown on an indium tin oxide (ITO) coated glass slide. On illumination, the relative photocurrent density at the onset potential has been obtained to be 845 which is a very significant experimental output with respect to any other TiO2 or Pt@TiO2 based photocatalysts for this application. The physicochemical stability and reusability of both materials were supported by 50 hours of extended electrochemical chronoamperometric measurements and powder XRD and the TEM analyses after electrocatalysis. This study explores a possible pathway for designing simple and less expensive but catalytically efficient silver based ternary sulfide NC systems for developing an SC material to reduce the energy crisis in the near future.

The Use of Tunable Optical Absorption Plasmonic Au and Ag Decorated TiO2 Structures as Efficient Visible Light Photocatalysts

Exploring solar-excited heterogeneous photocatalysts by taking advantage of surface plasmon resonance (SPR) has drawn growing research attention. As it could help to pave the way for global sustainable development. The decoration of TiO2 particles with noble metals possessing SPR effects is regarded as one of the most effective solutions. The perfect match of the SPR absorption band with the spectrum of incident light is an essential factor for plasmonic enhancement. However, modifying with sole noble metal is often limited as it tunes wavelength of only several nanometers. To overcome this drawback, an alternative approach can be offered by decoration with more than one noble metal. For instance, Au-Ag co-decoration displays greatly adjustable, composition-dependent SPR agent over a broad range of the visible light spectrum (ca. from 415 to 525 nm). Hence Au-Ag complex is a remarkable candidate for tuning the photo adsorption of TiO2 from UV to visible light. This study presents a novel and tailored method for the fabrication of Au-Ag co-modified TiO2 particles, and how Au-Ag dependent SPR was applied as the visible light-responsive TiO2 based photocatalysts in a simple but reliable way. The fabricated Au-Ag co-decorated TiO2 (AuxAg(1−x)/TiO2) was characterized and proved to own excellent stability and large specific surface area. The optimization of these particles against the wavelength of maximal solar light intensity was confirmed by photo degradation of methylene blue under visible light radiation. This work may provide further insight into the design of TiO2-based composites with improved photocatalytic properties for environmental remediation and renewable energy utilization.

Surface modification of graphene oxide via noncovalent functionalization with porphyrins for selective photocatalytic oxidation of alcohols

GO–porphyrin composites were simply prepared by a self-assembly process. The noncovalent interactions between the porphyrins and oxygen-containing functional groups on GO play a crucial role in controlling their photocatalytic activities.

Synthetic Approaches for C-N Bonds by TiO2 Photocatalysis

Nitrogen-containing organic compounds possess the most important status in drug molecules and agricultural chemicals. More than 80% currently used drugs have at least a C-N bond. The green and mild methodology to prepare diverse C-N bonds to replace traditional harsh preparation protocols is always a hotspot in modern synthetic chemistry. TiO₂-based nanomaterials, considered as environmentally benign, stable, and powerful photocatalysts, have recently been applied in some certain challenging organic synthesis including construction of useful C-N compounds under mild conditions that are impossible to complete by conventional catalysis. This mini review would present state-of-the-art paragon examples of TiO₂ photocatalyzed C-N bond formations. The discussion would be divided into two main sections: (1) N-alkylation of amines and (2) C-N formation in heterocycle synthesis. Especially, the mechanism of TiO₂ photocatalytic C-N bond formation through activating alcohol into C=O by photo-induced hole followed by C=NH-R formation and finally hydrogenating C=NH-R into C-N bonds by combination of photo-induced electron/H⁺ assisted with loaded-Pt would be covered in detail. We believe that the mini-review will bring new insights into TiO₂ photocatalysis applied to construct challenging organic compounds through enabling photo-induced hole and electron in a concerted way on coupling two substrate molecules together with respect to their conventionally independent catalysis behavior.

Selective photoelectrochemical oxidation of glycerol to high value-added dihydroxyacetone

It is highly profitable to transform glycerol – the main by-product from biodiesel production to high value-added chemicals. In this work, we develop a photoelectrochemical system based on nanoporous BiVO₄ for selective oxidation of glycerol to 1,3-dihydroxyacetone – one of the most valuable derivatives of glycerol. Under AM 1.5G front illumination (100 mW cm⁻²) in an acidic medium (pH = 2) without adscititious oxidant, the nanoporous BiVO₄ photoanode achieves a glycerol oxidation photocurrent density of 3.7 mA cm⁻² at a potential of 1.2 V versus RHE with 51% 1,3-dihydroxyacetone selectivity, equivalent to a production rate of 200 mmol of 1,3-dihydroxyacetone per m² of illumination area in one hour.

The selective conversion of inexpensive precursors to high-value chemicals presents valuable academic and industrial consequences. Here, the authors show bismuth vanadate photoanodes to utilize light and photoelectrochemically oxidize glycerol selectively to valuable industrial products.

Titanium-Dioxide-Based Visible-Light-Sensitive Photocatalysis: Mechanistic Insight and Applications

Titanium dioxide (TiO2) is one of the most practical and prevalent photo-functional materials. Many researchers have endeavored to design several types of visible-light-responsive photocatalysts. In particular, TiO2-based photocatalysts operating under visible light should be urgently designed and developed, in order to take advantage of the unlimited solar light available. Herein, we review recent advances of TiO2-based visible-light-sensitive photocatalysts, classified by the origins of charge separation photo-induced in (1) bulk impurity (N-doping), (2) hetero-junction of metal (Au NPs), and (3) interfacial surface complexes (ISC) and their related photocatalysts. These photocatalysts have demonstrated useful applications, such as photocatalytic mineralization of toxic agents in the polluted atmosphere and water, photocatalytic organic synthesis, and artificial photosynthesis. We wish to provide comprehension and enlightenment of modification strategies and mechanistic insight, and to inspire future work.

TiO₂ Photocatalysis for Transfer Hydrogenation

Catalytic transfer hydrogenation reactions, based on hydrogen sources other than gaseous H₂, are important processes that are preferential in both laboratories and factories. However, harsh conditions, such as high temperature, are usually required for most transition-metal catalytic and organocatalytic systems. Moreover, non-volatile hydrogen donors such as dihydropyridinedicarboxylate and formic acid are often required in these processes which increase the difficulty in separating products and lowered the whole atom economy. Recently, TiO₂ photocatalysis provides mild and facile access for transfer hydrogenation of C=C, C=O, N=O and C-X bonds by using volatile alcohols and amines as hydrogen sources. Upon light excitation, TiO₂ photo-induced holes have the ability to oxidatively take two hydrogen atoms off alcohols and amines under room temperature. Simultaneously, photo-induced conduction band electrons would combine with these two hydrogen atoms and smoothly hydrogenate multiple bonds and/or C-X bonds. It is heartening that practices and principles in the transfer hydrogenations of substrates containing C=C, C=O, N=O and C-X bond based on TiO₂ photocatalysis have overcome a lot of the traditional thermocatalysis' limitations and flaws which usually originate from high temperature operations. In this review, we will introduce the recent paragon examples of TiO₂ photocatalytic transfer hydrogenations used in (1) C=C and C≡C (2) C=O and C=N (3) N=O substrates and in-depth discuss basic principle, status, challenges and future directions of transfer hydrogenation mediated by TiO₂ photocatalysis.

Copper on the inner surface of mesoporous TiO2 hollow spheres: a highly selective photocatalyst for partial oxidation of methanol to methyl formate

To raise the methyl formate (MF) selectivity at high methanol conversion is one of the most challenging topics for photocatalytic partial oxidation of methanol to MF.