Hydrogen Adsorption in Ultramicroporous Metal-Organic Frameworks Featuring Silent Open Metal Sites

In this study, we utilized an ultramicroporous metal-organic framework (MOF) named [Ni3(pzdc)2(ade)2(H2O)4]·2.18H2O (where H3pzdc represents pyrazole-3,5-dicarboxylic acid and ade represents adenine) for hydrogen (H2) adsorption. Upon activation, [Ni3(pzdc)2(ade)2] was obtained, and in situ carbon monoxide loading by transmission infrared spectroscopy revealed the generation of open Ni(II) sites. The MOF displayed a Brunauer-Emmett-Teller (BET) surface area of 160 m2/g and a pore size of 0.67 nm. Hydrogen adsorption measurements conducted on this MOF at 77 K showed a steep increase in uptake (up to 1.93 mmol/g at 0.04 bar) at low pressure, reaching a H2 uptake saturation at 2.11 mmol/g at ∼0.15 bar. The affinity of this MOF for H2 was determined to be 9.7 ± 1.0 kJ/mol. In situ H2 loading experiments supported by molecular simulations confirmed that H2 does not bind to the open Ni(II) sites of [Ni3(pzdc)2(ade)2], and the high affinity of the MOF for H2 is attributed to the interplay of pore size, shape, and functionality.

Handling fluorinated gases as solid reagents using metal-organic frameworks

Fluorine is an increasingly common substituent in pharmaceuticals and agrochemicals because it improves the bioavailability and metabolic stability of organic molecules. Fluorinated gases represent intuitive building blocks for the late-stage installation of fluorinated groups, but they are generally overlooked because they require the use of specialized equipment. We report a general strategy for handling fluorinated gases as benchtop-stable solid reagents using metal-organic frameworks (MOFs). Gas-MOF reagents are prepared on gram-scale and used to facilitate fluorovinylation and fluoroalkylation reactions. Encapsulation of gas-MOF reagents within wax enables stable storage on the benchtop and controlled release into solution upon sonication, which represents a safer alternative to handling the gas directly. Furthermore, our approach enables high-throughput reaction development with these gases.

A highly stable terbium(III) metal-organic framework MOF-76(Tb) for hydrogen storage and humidity sensing

The present study described the synthesis and characterization of MOF-76(Tb) for hydrogen storage and humidity sensing applications. The structure and morphology of as-synthesized material were studied using powder X-ray diffraction, scanning, and transmission electron microscopy. The crystal structure of MOF-76(Tb) consists of terbium(III) and benzene-1,3,5-tricarboxylate(-III) ions, one coordinated aqua ligand and one crystallization N,N´-dimethylformamide molecule. The polymeric framework of MOF-76(Tb) contains 1D sinusoidally shaped channels with sizes of 6.6 × 6.6 Å propagating along c crystallographic axis. The thermogravimetric analysis of the prepared material exhibited thermal stability up to 600 °C. At 77 K and pressure up to 20 bar; 0.6 wt.% hydrogen storage capacity for MOF-76(Tb) was observed. Finally, the humidity sensing measurements (water adsorption experiments) were performed, and the results indicate that MOF-76(Tb) is not a suitable material for moisture sensing applications.

Effect of modulator ligands on the growth of Co2(dobdc) nanorods

Control over the size, shape, uniformity, and external surface chemistry of metal-organic framework nanocrystals is important for a wide range of applications. Here, we investigate how monotopic modulators that mimic the coordination mode of native bridging ligands affect the growth of anisotropic Co2(dobdc) (dobdc4- = 2,5-dihydroxy-1,4-benzenedicarboxylic acid) nanorods. Through a combination of transmission electron microscopy (TEM) and nuclear magnetic resonance spectroscopy (NMR) studies, nanorod diameter was found to be strongly correlated to the acidity of the modulator and to the degree of modulator incorporation into the nanorod structure. Notably, highly acidic modulators allowed for the preparation of sub-10 nm nanorods, a previously elusive size regime for the M2(dobdc) family. More broadly, this study provides new insights into the mechanism of modulated growth of metal-organic framework nanoparticles.

Porous zeolitic imidazolate frameworks assembled with highly-flattened tetrahedral copper(II) centres and 2-nitroimidazolates

Cu(II)-based zeolitic imidazolates (Cu-ZIFs), Cu-ZIF-gis and -rho, formulated as Cu(nIm)₂ (nIm = 2-nitroimidazolate) have highly-flattened tetrahedral coordination geometry. Cu-ZIF-gis has 2.4 Å cylindrical pores that can adsorb H₂ gas, and Cu-ZIF-rho has 19.8 Å cages with a BET surface area of 1320 m² g^-1.

Carbon dioxide and hydrogen adsorption study on surface-modified HKUST-1 with diamine/triamine

The present article intended to study the influence of post-synthetic modification with ethylenediamine (en, diamine) and diethylenetriamine (deta, triamine) within the coordinatively unsaturated sites (CUSs) of HKUST-1 on carbon dioxide and hydrogen storage. The as-sythesized adsorbent was solvent-exchanged and subsequently post-synthetically modified with di-/triamines as sources of amine-based sorption sites due to the increased CO₂ storage capacity. It is known that carbon dioxide molecules have a high affinity for amine groups, and moreover, the volume of amine molecules itself reduces the free pore volume in HKUST-1, which is the driving force for increasing the hydrogen storage capacity. Different concentrations of amines were used for modification of HKUST-1, through which materials with different molar ratios of HKUST-1 to amine: 1:0.05; 1:0.1; 1:0.25; 1:0.5; 1:0.75; 1:1; 1:1.5 were synthesized. Adsorption measurements of carbon dioxide at 0 °C up to 1 bar have shown that the compounds can adsorb large amounts of carbon dioxide. In general, deta-modified samples showed higher adsorbed amounts of CO₂ compared to en-modified materials, which can be explained by the higher number of amine groups within the deta molecule. With an increasing molar ratio of amines, there was a decrease in wt.% CO₂. The maximum storage capacity of CO₂ was 22.3 wt.% for HKUST-1: en/1:0.1 and 33.1 wt.% for HKUST-1: deta/1:0.05 at 0 °C and 1 bar. Hydrogen adsorption measurements showed the same trend as carbon dioxide, with the maximum H₂ adsorbed amounts being 1.82 wt.% for HKUST-1: en/1:0.1 and 2.28 wt.% for HKUST-1: deta/1:0.05 at − 196 °C and 1 bar.

Vapor-Phase Adsorption of Xylene Isomers and Ethylbenzene in MOF-74 Thin Films

Thin films of Co-MOF-74 and Ni-MOF-74 were synthesized on Au-coated quartz crystal microbalance substrates by a vapor-assisted conversion (VAC) method that precludes the need for activation via postsynthetic solvent exchange. All thin films were structurally characterized by powder X-ray diffraction, reflection-absorption infrared spectroscopy, and Raman spectroscopy. Scanning electron microscopy (SEM) images reveal that the Ni-MOF-74 films exists as a dense base layer with hemispherical protrusions on the surface. In contrast, the scanning electron microscopy images of the Co-MOF-74 thin films show a rough surface with spherical deposits. The thin film morphologies were different than the powders resulting from the bulk synthesis. Gravimetric vapor-phase adsorption measurements for xylene isomers and ethylbenzene within Co-MOF-74 and Ni-MOF-74 thin films were conducted, and the results were compared with those reported for the corresponding bulk powders. Despite different morphologies, the saturation capacities of Ni-MOF-74 and Co-MOF-74 thin films were found to be nearly equivalent to those reported for the bulk powders. The results demonstrate that the VAC method can produce MOF-74 thin films that retain the intrinsic properties that are observed in bulk powders.

Enhancing Hydrogen Adsorption Capacity of Metal Organic Frameworks M(BDC)TED0.5 through Constructing a Bimetallic Structure

Metal organic frameworks (MOFs) have promising application prospects in the field of hydrogen storage. However, the successful application of MOFs in the field is still limited by their hydrogen storage capacity. Herein, a series of M _x M_1-x (BDC)TED_0.5 (M = Zn, Cu, Co, or Ni) with a bimetallic structure was constructed by introducing two metal ions in the synthesis process. The results of X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma showed that the bimetallic structure with different content ratios can be stably constructed by a hydrothermal method. Among them, the Cu-based bimetal MOFs Cu_0.625Ni_0.375(BDC)TED_0.5 exhibited the best hydrogen storage capacity of 2.04 wt% at 77 K and 1 bar, which was 22% higher than that of monometallic Ni(BDC)TED_0.5. The enhanced hydrogen storage capacity can be attributed to the improved specific surface area and micropore volume of bimetal MOFs by introducing an appropriate amount of bimetallic atoms.

Porous Metal-Organic Frameworks for Hydrogen Storage

The high gravimetric energy density and environmental benefit place hydrogen as a promising alternative to the widely used fossil fuel, which is however impeded by the lack of safe, energy-saving...

Dynamics & Spectroscopy with Neutrons-Recent Developments & Emerging Opportunities

This work provides an up-to-date overview of recent developments in neutron spectroscopic techniques and associated computational tools to interrogate the structural properties and dynamical behavior of complex and disordered materials, with a focus on those of a soft and polymeric nature. These have and continue to pave the way for new scientific opportunities simply thought unthinkable not so long ago, and have particularly benefited from advances in high-resolution, broadband techniques spanning energy transfers from the meV to the eV. Topical areas include the identification and robust assignment of low-energy modes underpinning functionality in soft solids and supramolecular frameworks, or the quantification in the laboratory of hitherto unexplored nuclear quantum effects dictating thermodynamic properties. In addition to novel classes of materials, we also discuss recent discoveries around water and its phase diagram, which continue to surprise us. All throughout, emphasis is placed on linking these ongoing and exciting experimental and computational developments to specific scientific questions in the context of the discovery of new materials for sustainable technologies.

Buffered Coordination Modulation as a Means of Controlling Crystal Morphology and Molecular Diffusion in an Anisotropic Metal-Organic Framework

Significant advances have been made in the synthesis of chemically selective environments within metal-organic frameworks, yet materials development and industrial implementation have been hindered by the inability to predictively control crystallite size and shape. One common strategy to control crystal growth is the inclusion of coordination modulators, which are molecular species designed to compete with the linker for metal coordination during synthesis. However, these modulators can simultaneously alter the pH of the reaction solution, an effect that can also significantly influence crystal morphology. Herein, noncoordinating buffers are used to independently control reaction pH during metal-organic framework synthesis, enabling direct interrogation of the role of the coordinating species on crystal growth. We demonstrate the efficacy of this strategy in the synthesis of low-dispersity single-crystals of the framework Co₂(dobdc) (dobdc^4-= 2,5-dioxido-1,4-benzenedicarboxylate) in a pH 7-buffered solution using cobalt(II) acetate as the metal source. Density functional theory calculations reveal that acetate competitively binds to Co during crystallization, and by using a series of cobalt(II) salts with carboxylate anions of varying coordination strength, it is possible to control crystal growth along the c-direction. Finally, we use zero length column chromatography to show that crystal morphology has a direct impact on guest diffusional path length for the industrially important hydrocarbon m-xylene. Together, these results provide molecular-level insight into the use of modulators in governing crystallite morphology and a powerful strategy for the control of molecular diffusion rates within metal-organic frameworks.

Effect of Larger Pore Size on the Sorption Properties of Isoreticular Metal-Organic Frameworks with High Number of Open Metal Sites

Four isostructural CPO‐54‐M metal‐organic frameworks based on the larger organic linker 1,5‐dihydroxynaphthalene‐2,6‐dicarboxylic acid and divalent cations (M=Mn, Mg, Ni, Co) are shown to be isoreticular to the CPO‐27 (MOF‐74) materials. Desolvated CPO‐54‐Mn contains a very high concentration of open metal sites, which has a pronounced effect on the gas adsorption of N₂, H₂, CO₂ and CO. Initial isosteric heats of adsorption are significantly higher than for MOFs without open metal sites and are slightly higher than for CPO‐27. The plateau of high heat of adsorption decreases earlier in CPO‐54‐Mn as a function of loading per mole than in CPO‐27‐Mn. Cluster and periodic density functional theory based calculations of the adsorbate structures and energetics show that the larger adsorption energy at low loadings, when only open metal sites are occupied, is mainly due to larger contribution of dispersive interactions for the materials with the larger, more electron rich bridging ligand.

Hydrogen-Bonded Organic Frameworks as a Tunable Platform for Functional Materials

As a novel class of porous crystalline materials, hydrogen-bonded organic frameworks (HOFs), self-assembled from organic or metal-organic building blocks through intermolecular hydrogen-bonding interactions, have attracted more and more attention. Over the past decade, a number of porous HOFs have been constructed through judicious selection of H-bonding motifs, which are further enforced by other weak intermolecular interactions such as π-π stacking and van der Waals forces and framework interpenetration. Since the H-bonds are weaker than coordinate and covalent bonds used for the construction of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), HOFs have some unique features such as mild synthesis condition, solution processability, easy healing, and regeneration. These features enable HOFs to be a tunable platform for the construction of functional materials. Here, we review the H-bonding motifs used for constructing porous HOFs and highlight some of their applications, including gas separation and storage, chiral separation and structure determination, fluorescent sensing, heterogeneous catalysis, biological applications, proton conduction, photoluminescent materials, and membrane-based applications.

Crystallographic characterization of the metal-organic framework Fe2(bdp)3 upon reductive cation insertion

Precisely locating extra-framework cations in anionic metal–organic framework compounds remains a long-standing, yet crucial, challenge for elucidating structure–performance relationships in functional materials. Single-crystal X-ray diffraction is one of the most powerful approaches for this task, but single crystals of frameworks often degrade when subjected to post-synthetic metalation or reduction. Here, we demonstrate the growth of sizable single crystals of the robust metal–organic framework Fe₂(bdp)₃ (bdp²⁻ = benzene-1,4-dipyrazolate) and employ single-crystal-to-single-crystal chemical reductions to access the solvated framework materials A₂Fe₂(bdp)₃·yTHF (A = Li⁺, Na⁺, K⁺). X-ray diffraction analysis of the sodium and potassium congeners reveals that the cations are located near the center of the triangular framework channels and are stabilized by weak cation–π interactions with the framework ligands. Freeze-drying with benzene enables isolation of activated single crystals of Na_0.5Fe₂(bdp)₃ and Li₂Fe₂(bdp)₃ and the first structural characterization of activated metal–organic frameworks wherein extra-framework alkali metal cations are also structurally located. Comparison of the solvated and activated sodium-containing structures reveals that the cation positions differ in the two materials, likely due to cation migration that occurs upon solvent removal to maximize stabilizing cation–π interactions. Hydrogen adsorption data indicate that these cation–framework interactions are sufficient to diminish the effective cationic charge, leading to little or no enhancement in gas uptake relative to Fe₂(bdp)₃. In contrast, Mg_0.85Fe₂(bdp)₃ exhibits enhanced H₂ affinity and capacity over the non-reduced parent material. This observation shows that increasing the charge density of the pore-residing cation serves to compensate for charge dampening effects resulting from cation–framework interactions and thereby promotes stronger cation–H₂ interactions.

Single-crystal X-ray diffraction reveals structural influences on gas adsorption properties in anionic metal–organic frameworks.

MOF-Based Membranes for Gas Separations

Metal-organic frameworks (MOFs) represent the largest known class of porous crystalline materials ever synthesized. Their narrow pore windows and nearly unlimited structural and chemical features have made these materials of significant interest for membrane-based gas separations. In this comprehensive review, we discuss opportunities and challenges related to the formation of pure MOF films and mixed-matrix membranes (MMMs). Common and emerging separation applications are identified, and membrane transport theory for MOFs is described and contextualized relative to the governing principles that describe transport in polymers. Additionally, cross-cutting research opportunities using advanced metrologies and computational techniques are reviewed. To quantify membrane performance, we introduce a simple membrane performance score that has been tabulated for all of the literature data compiled in this review. These data are reported on upper bound plots, revealing classes of MOF materials that consistently demonstrate promising separation performance. Recommendations are provided with the intent of identifying the most promising materials and directions for the field in terms of fundamental science and eventual deployment of MOF materials for commercial membrane-based gas separations.

Insights into the Gas Adsorption Mechanisms in Metal-Organic Frameworks from Classical Molecular Simulations

Classical molecular simulations can provide significant insights into the gas adsorption mechanisms and binding sites in various metal-organic frameworks (MOFs). These simulations involve assessing the interactions between the MOF and an adsorbate molecule by calculating the potential energy of the MOF-adsorbate system using a functional form that generally includes nonbonded interaction terms, such as the repulsion/dispersion and permanent electrostatic energies. Grand canonical Monte Carlo (GCMC) is the most widely used classical method that is carried out to simulate gas adsorption and separation in MOFs and identify the favorable adsorbate binding sites. In this review, we provide an overview of the GCMC methods that are normally utilized to perform these simulations. We also describe how a typical force field is developed for the MOF, which is required to compute the classical potential energy of the system. Furthermore, we highlight some of the common analysis techniques that have been used to determine the locations of the preferential binding sites in these materials. We also review some of the early classical molecular simulation studies that have contributed to our working understanding of the gas adsorption mechanisms in MOFs. Finally, we show that the implementation of classical polarization for simulations in MOFs can be necessary for the accurate modeling of an adsorbate in these materials, particularly those that contain open-metal sites. In general, molecular simulations can provide a great complement to experimental studies by helping to rationalize the favorable MOF-adsorbate interactions and the mechanism of gas adsorption.

Spectroscopy, microscopy, diffraction and scattering of archetypal MOFs: formation, metal sites in catalysis and thin films

A comprehensive overview of characterization tools for the analysis of well-known metal–organic frameworks and physico-chemical phenomena associated to their applications.

Hydrogen adsorption mechanism of MOF-74 metal–organic frameworks: an insight from first principles calculations

The microscopic mechanism of the H₂ adsorption of two Mg-MOF-74 isoreticular frameworks, one with a benzenedicarboxylate (BDC) linker and the other with a dihydroxyfumarate (DHF) linker, were studied on the basis of density functional theory (DFT) method. Possible adsorption sites on the internal surface of the two MOFs were detected using ab initio molecular dynamics (AIMD) annealing simulations. The simulations were able to reproduce all adsorption sites which have been experimentally observed for the BDC-based M-MOF-74 frameworks with M = Ni and Zn. In descending order of binding strengths, they are the adsorption sites primarily induced by the open metal sites P₁, the oxygen atoms of the oxido groups P₂ and the aromatic rings P₃. The H₂–framework binding strengths were properly evaluated by taking into account the vibrational zero-point energy (ZPE) contribution. An additional type of adsorption sites induced by the oxygen atoms of the carboxyl groups P₄ is predicted for the Mg-MOF-74 framework. Two types of adsorption sites primarily induced by the open metal sites P₁ and oxygen atoms of the carboxyl groups P₂ were predicted for the DHF-based Mg-MOF-74 framework. Detailed analysis of the electron density showed that the electrostatic interaction of the H₂ molecule with the charge distribution of the local framework environment within a radius of ∼3.5 Å is a key factor to define adsorption positions and binding strength. The absence of the P₄ sites in the BDC-based Zn-MOF-74 framework is caused by the lower charge density at the oxygen atoms induced by less electro-positive metal. The substitution of the nonaromatic DHF linker for the aromatic BDC linker reduces the binding strength at the metal induced adsorption sites by 1.45 kJ mol⁻¹ due to the absence of the aromatic ring.

The microscopic mechanism of the H₂ adsorption of two Mg-MOF-74 isoreticular frameworks, one with a benzenedicarboxylate linker and the other with a dihydroxyfumarate linker, were studied on the basis of density functional theory (DFT) method.

A practical guide to calculate the isosteric heat/enthalpy of adsorption via adsorption isotherms in metal-organic frameworks, MOFs

Porous materials such as MOFs are interesting candidates for gas separation and storage. An important parameter to gain deeper insights to the adsorption process of an adsorptive on an adsorbent is the isosteric enthalpy of adsorption, ΔHads which is defined as the heat to be released/required when an adsorptive binds to/detaches from the solid surface of an adsorbent. Two or three adsorption isotherms at different but close temperatures with ΔT ≤ 20 K for two and ΔT ≈ 10 K for three isotherms are the basis to derive the isosteric enthalpy of adsorption through the Clausius-Clapeyron approach or the virial analysis. This Perspective presents the procedure of the common (dual-site) Freundlich-Langmuir fit/Clausius-Clapeyron approach and the virial fit of the isotherms with usable Excel sheets and Origin files for the subsequent derivation of ΔHads. Exemplary adsorption isotherms of CO2, SO2 and H2 at two temperatures on MOFs are analyzed. The detailed computational description and comparison of the Clausius-Clapeyron approach and the virial analysis to determine ΔHads outlines the limitations of the two methods with respect to the available experimental data, especially at low pressure/low uptake values. It is emphasized that no extrapolation beyond the experimental data range should be done. The quality of the important and underlying isotherm fits must be checked and ensured with logarithmic-scale n/p isotherm plots for the (dual-site) Freundlich-Langmuir fit in the low-pressure region and through low standard deviations for the coefficients in the virial analysis.

Coordinatively unsaturated metal sites (open metal sites) in metal–organic frameworks: design and applications

The defined synthesis of OMS in MOFs is the basis for targeted functionalization through grafting, the coordination of weakly binding species and increased (supramolecular) interactions with guest molecules.

IRMOF-74(n)-Mg: a novel catalyst series for hydrogen activation and hydrogenolysis of C-O bonds

Metal-Organic Frameworks (MOFs) that catalyze hydrogenolysis reactions are rare and there is little understanding of how the MOF, hydrogen, and substrate molecules interact. In this regard, the isoreticular IRMOF-74 series, two of which are known catalysts for hydrogenolysis of aromatic C-O bonds, provides an unusual opportunity for systematic probing of these reactions. The diameter of the 1D open channels can be varied within a common topology owing to the common secondary building unit (SBU) and controllable length of the hydroxy-carboxylate struts. We show that the first four members of the IRMOF-74(Mg) series are inherently catalytic for aromatic C-O bond hydrogenolysis and that the conversion varies non-monotonically with pore size. These catalysts are recyclable and reusable, retaining their crystallinity and framework structure after the hydrogenolysis reaction. The hydrogenolysis conversion of phenylethylphenyl ether (PPE), benzylphenyl ether (BPE), and diphenyl ether (DPE) varies as PPE > BPE > DPE, consistent with the strength of the C-O bond. Counterintuitively, however, the conversion also follows the trend IRMOF-74(III) > IRMOF-74(IV) > IRMOF-74(II) > IRMOF-74(I), with little variation in the corresponding selectivity. DFT calculations suggest the unexpected behavior is due to much stronger ether and phenol binding to the Mg(ii) open metal sites (OMS) of IRMOF-74(III), resulting from a structural distortion that moves the Mg2+ ions toward the interior of the pore. Solid-state 25Mg NMR data indicate that both H2 and ether molecules interact with the Mg(ii) OMS and hydrogen-deuterium exchange reactions show that these MOFs activate dihydrogen bonds. The results suggest that both confinement and the presence of reactive metals are essential for achieving the high catalytic activity, but that subtle variations in pore structure can significantly affect the catalysis. Moreover, they challenge the notion that simply increasing MOF pore size within a constant topology will lead to higher conversions.

Porous metal-organic frameworks for gas storage and separation: Status and challenges

Gases are widely used as energy resources for industry and our daily life. Developing energy cost efficient porous materials for gas storage and separation is of fundamentally and industrially important, and is one of the most important aspects of energy chemistry and materials. Metal-organic frameworks (MOFs), representing a novel class of porous materials, feature unique pore structure, such as exceptional porosity, tunable pore structures, ready functionalization, which not only enables high density energy storage of clean fuel gas in MOF adsorbents, but also facilitates distinct host-guest interactions and/or sieving effects to differentiate different molecules for energy-efficient separation economy. In this review, we summarize and highlight the recent advances in the arena of gas storage and separation using MOFs as adsorbents, including progresses in MOF-based membranes for gas separation, which could afford broader concepts to the current status and challenges in this field.

Direct Observation of Li+ Ions Trapped in a Mg2+-Templated Metal-Organic Framework

Herein we report the first example of a metal-organic framework (MOF) in which the location of Li⁺ ions trapped in the porous confinement can be unambiguously defined by single-crystal X-ray diffraction. Furthermore, the Li⁺-doped MOF shows significant enhancement in gas uptake as well as selective adsorption of CO₂ over CH₄.

Novel and Versatile Cobalt Azobenzene-Based Metal-Organic Framework as Hydrogen Adsorbent

A novel URJC-3 material based on cobalt and 5,5'-(diazene-1,2-diyl)diisophthalate ligand, containing Lewis acid and basic sites, has been synthesized under solvothermal conditions. Compound URJC-3, with polyhedral morphology, crystallizes in the tetragonal and P4₃ 2₁ 2 space group, exhibiting a three-dimensional structure with small channels along a and b axes. This material was fully characterized, and its hydrogen adsorption properties were estimated for a wide range of temperatures (77-298 K) and pressures (1-170 bar). The hydrogen storage capacity of URJC-3 is quite high in relation to its moderate surface area, which is probably due to the confinement effect of hydrogen molecules inside its reduced pores of 6 Å, which is close the ionic radii of hydrogen molecules. The storage capacity of this material is not only higher than that of active carbon and purified single-walled carbon nanotubes, but also surpasses the gravimetric hydrogen uptake of most MOF materials.

Optimizing H2, D2, and C2H2 Sorption Properties by Tuning the Pore Apertures in Metal-Organic Frameworks

By adjustment of the arm lengths of two triphenylamine-based ligands, two nearly isostructural metal-organic frameworks (MOFs), namely, the reported nanoporous FIR-29 (FIR = Fujian Institute of Research) and the new microporous FJI-Y9 (FJI = Fujian Institute), are obtained, and all exhibit honeycomb lattices of hexagonal channels with Ca-COO chains connected by tris[(4-carboxyl)phenylduryl]amine (H₃TCPA) ligands and 4,4',4''-nitrilotribenzoic acid (H₃NTB) ligands, respectively. Although the Brunauer-Emmett-Teller (BET) surface area (1117 m² g^-1) and pore size (8.5 Å) of FJI-Y9 are much lower than those (BET surface area of 2061 m² g^-1 and pore size of 16 Å) of the reported FIR-29 because of the shorter arm lengths of H₃NTB, the activated FJI-Y9-ht shows high H₂ (202.3 cm³ g^-1) and D₂ (221.9 cm³ g^-1) uptake under 77 K and 1 bar and C₂H₂ uptake of 168.9 cm³ g^-1 under 273 K and 1 bar, which are all at least 48% enhancement over those of FIR-29-ht. The above results indicate that small pores in MOFs are beneficial to the uptake of some special gases including H₂, D₂, C₂H₂, etc.

Structural and dynamic studies of substrate binding in porous metal-organic frameworks

Porous metal-organic frameworks (MOFs) are the subject of considerable research interest because of their high porosity and capability of specific binding to small molecules, thus underpinning a wide range of materials functions such as gas adsorption, separation, drug delivery, catalysis, and sensing. MOFs, constructed by the designed assembly of metal ions and functional organic linkers, are an emerging class of porous materials with extended porous structures containing periodic binding sites. MOFs thus provide a new platform for the study of the chemistry and reactivity of small molecules in confined pores using advanced diffraction and spectroscopic techniques. In this review, we focus on recent progress in experimental investigations on the crystallographic, dynamic and kinetic aspects of substrate binding within porous MOFs. In particular, we focus on studies on host-guest interactions involving open metal sites or pendant functional groups in the pore as the primary binding sites for guest molecules.

A computational approach towards understanding hydrogen gas adsorption in Co–MIL-88A

The hydrogen adsorption is most favorable at the hollow site of Co–MIL-88A.

Observation of Binding and Rotation of Methane and Hydrogen within a Functional Metal-Organic Framework

The key requirement for a portable store of natural gas is to maximize the amount of gas within the smallest possible space. The packing of methane (CH4) in a given storage medium at the highest possible density is, therefore, a highly desirable but challenging target. We report a microporous hydroxyl-decorated material, MFM-300(In) (MFM = Manchester Framework Material, replacing the NOTT designation), which displays a high volumetric uptake of 202 v/v at 298 K and 35 bar for CH4 and 488 v/v at 77 K and 20 bar for H2. Direct observation and quantification of the location, binding, and rotational modes of adsorbed CH4 and H2 molecules within this host have been achieved, using neutron diffraction and inelastic neutron scattering experiments, coupled with density functional theory (DFT) modeling. These complementary techniques reveal a very efficient packing of H2 and CH4 molecules within MFM-300(In), reminiscent of the condensed gas in pure component crystalline solids. We also report here, for the first time, the experimental observation of a direct binding interaction between adsorbed CH4 molecules and the hydroxyl groups within the pore of a material. This is different from the arrangement found in CH4/water clathrates, the CH4 store of nature.

Grasping hydrogen adsorption and dynamics in metal-organic frameworks using (2)H solid-state NMR

Record greenhouse gas emissions have spurred the search for clean energy sources such as hydrogen (H2) fuel cells. Metal-organic frameworks (MOFs) are promising H2 adsorption and storage media, but knowledge of H2 dynamics and adsorption strengths in these materials is lacking. Variable-temperature (VT) (2)H solid-state NMR (SSNMR) experiments targeting (2)H2 gas (i.e., D2) shed light on D2 adsorption and dynamics within six representative MOFs: UiO-66, M-MOF-74 (M = Zn, Mg, Ni), and α-M3(COOH)6 (M = Mg, Zn). D2 binding is relatively strong in Mg-MOF-74, Ni-MOF-74, α-Mg3(COOH)6, and α-Zn3(COOH)6, giving rise to broad (2)H SSNMR powder patterns. In contrast, D2 adsorption is weaker in UiO-66 and Zn-MOF-74, as evidenced by the narrow (2)H resonances that correspond to rapid reorientation of the D2 molecules. Employing (2)H SSNMR experiments in this fashion holds great promise for the correlation of MOF structural features and functional groups/metal centers to H2 dynamics and host-guest interactions.

Crystal structure of diaqua(μ2-1,1′-biphenyl-4,4′-diylbis(1H-imidazole)-κ2 N:N′)tetrakis(3-carboxy-5-ethylpyridine-2-carboxylato-κ2 N,O)dizinc(II), C54H50N8O18Zn2

C54H50N8O18Zn2, orthorhombic, Pbca (no. 61), a = 14.5349(5) Å, b = 17.3183(5) Å, c = 20.8872(7) Å, V = 5257.7(3) Å3, Z = 8, R gt (F) = 0.0401, wR ref(F 2) = 0.1185, T = 293(2) K.

Synthesis, structure and adsorption properties of lanthanide-organic frameworks with pyridine-3,5-bis(phenyl-4-carboxylate)

Under solvothermal conditions, reactions of pyridine-3,5-bis(phenyl-4-carboxylic acid) (H2L) with lanthanide metal salts give rise to three new metal-organic frameworks (MOFs) with the formula {[Ln4(L)3(μ3-OH)4(H2O)4]·(NO3)2·solvent}n [Ln = Er (1), Yb (2) and Lu (3)]. The complexes were characterized by single crystal and powder X-ray diffraction, IR and thermogravimetric analyses. They have the same two-fold interpenetrating three-dimensional (3D) framework structures with [Ln4(COO)6(μ3-OH)4(H2O)4] clusters as secondary building units (SBUs) and a rare 6-connected lcy topology with the point (Schläfli) symbol of {3(3)·5(9)·6(3)}. Interestingly, 1-3 show selective and hysteretic sorption of CO2 over N2, and the photoluminescence properties of the complexes were also investigated.

A silver coordination cage assembled from [Ag2(bis(isoxazolyl))3]: DFT approach to the binding forces within the host–guest interactions

The storage and detection of different types of molecules using porous materials such as metal–organic frameworks (MOFs) have currently become an area of interest in chemistry.

An indirect generation of 1D MII-2,5-dihydroxybenzoquinone coordination polymers, their structural rearrangements and generation of materials with a high affinity for H2, CO2 and CH4

1D coordination polymers undergo transformations upon desolvation to yield sorbent materials.

Green synthesis, optical and magnetic properties of a MnIImetal–organic framework (MOF) that exhibits high heat of H2adsorption

Green synthesis of a 3D, Mn(ii) MOF, [Mn₃(NDC)₃(DMA)₄]n(1) has been achieved by employing mechanochemical and sonochemical routes and1′exhibits an interesting gas uptake properties with a high value of isosteric heat of adsorption (Q_st) for H₂.

Dynamics of H2 adsorbed in porous materials as revealed by computational analysis of inelastic neutron scattering spectra

This perspective article reviews the different types of quantum and classical mechanical methods that have been implemented to interpret the INS spectra for H₂ adsorbed in porous materials.

Adsorption of two gas molecules at a single metal site in a metal–organic framework

One strategy to markedly increase the gas storage capacity of metal–organic frameworks is to introduce coordinatively-unsaturated metal centers capable of binding multiple gas molecules.