Enhancement of electronic effects at a biomolecule-inorganic interface by multivalent interactions

The binding of peptides and proteins through multiple weak interactions is ubiquitous in nature. Biopanning has been used to "hijack" this multivalent binding for the functionalization of surfaces. For practical applications it is important to understand how multivalency influences the binding interactions and the resulting behaviour of the surface. Considering the importance of optimization of the electronic properties of surfaces in diverse electronic and optoelectronic applications, we study here the relation between the multivalency effect and the resulting modulation of the surface work function. We use 12-mer peptides, which were found to strongly bind to oxide surfaces, to functionalize indium tin oxide (ITO) surfaces. We show that the affinity of the peptides for the ITO surface, and concurrently the effect on the ITO work function, are linearly affected by the number of basic residues in the sequence. The multivalent binding interactions lead to a peptide crowding effect, and a stronger modulation of the work function for adodecapeptide than for a single basic amino acid functionalization. The bioderived molecular platform presented herein can pave the way to a novel approach to improve the performance of optoelectronic devices in an eco-friendly manner.

Nano- and micro-patterning biotemplated magnetic CoPt arrays

Patterned thin-films of magnetic nanoparticles (MNPs) can be used to make: surfaces for manipulating and sorting cells, sensors, 2D spin-ices and high-density data storage devices. Conventional manufacture of patterned magnetic thin-films is not environmentally friendly because it uses high temperatures (hundreds of degrees Celsius) and high vacuum, which requires expensive specialised equipment. To tackle these issues, we have taken inspiration from nature to create environmentally friendly patterns of ferromagnetic CoPt using a biotemplating peptide under mild conditions and simple apparatus. Nano-patterning via interference lithography (IL) and micro-patterning using micro-contact printing (μCP) were used to create a peptide resistant mask onto a gold surface under ambient conditions. We redesigned a biotemplating peptide (CGSGKTHEIHSPLLHK) to self-assemble onto gold surfaces, and mineralised the patterns with CoPt at 18 °C in water. Ferromagnetic CoPt is biotemplated by the immobilised peptides, and the patterned MNPs maintain stable magnetic domains. This bioinspired study offers an ecological route towards developing biotemplated magnetic thin-films for use in applications such as sensing, cell manipulation and data storage.

Au(i) N-heterocyclic carbenes from bis-imidazolium amphiphiles: synthesis, cytotoxicity and incorporation onto gold nanoparticles

Bis-imidazolium amphiphiles capable of forming Au(i) N-heterocyclic carbenes and gold nanoparticles for potential cancer therapy.

Influence of Solvent in Controlling Peptide-Surface Interactions

Protein binding to surfaces is an important phenomenon in biology and in modern technological applications. Extensive experimental and theoretical research has been focused in recent years on revealing the factors that govern binding affinity to surfaces. Theoretical studies mainly focus on examining the contribution of the individual amino acids or, alternatively, the binding potential energies of the full peptide, which are unable to capture entropic contributions and neglect the dynamic nature of the system. We present here a methodology that involves the combination of nonequilibrium dynamics simulations with strategic mutation of polar residues to reveal the different factors governing the binding free energy of a peptide to a surface. Using a gold-binding peptide as an example, we show that relative binding free energies are a consequence of the balance between strong interactions of the peptide with the surface and the ability for the bulk solvent to stabilize the peptide.

Electroassisted codeposition of sol-gel derived silica nanocomposite directs the fabrication of coral-like nanostructured porous gold

Herein, we report on a one-step coelectrodeposition method to form gold-silica nanocomposite materials from which high surface area nanostructured gold electrodes can be produced. The as-prepared Au-SiO2 films possess an interconnected three-dimensional porous framework with different silica-gold ratios depending on the deposition solutions and parameters. Chemical etching of the nanocomposite films using hydrofluoric acid resulted in the formation of nanostructured porous gold films with coral-like structures and pores in the nanometer range. The cross-linkage of the gold coral branches resulted in the generation of a porous framework. X-ray photoelectron spectroscopy confirms the complete removal of silica. Well-controlled surface area enhancement, film thickness, and morphology were achieved by manipulating the deposition parameters, such as potential, time, and gold ion and sol-gel monomer concentrations in the deposition solution. An enhancement in the surface area of the electrode up to 57 times relative to the geometric area has been achieved. The thickness of the as-prepared Au-SiO2 nanocomposite films is relatively high and varied from 8 to 15 μm by varying the applied deposition potential while the thickness of the coral-like nanostructured porous gold films ranged from 0.22 to 2.25 μm. A critical sol-gel monomer concentration (CSGC) was determined at which the deposited silica around the gold coral was able to stabilize the coral-like gold nanostructures, while below the CSGC, the coral-like gold nanostructures were unstable and the surface area of the nanostructured porous gold electrodes decreased.

Antibody-mimetic peptoid nanosheets for molecular recognition

The ability of antibodies to bind a wide variety of analytes with high specificity and high affinity make them ideal candidates as molecular recognition elements for chemical and biological sensors. However, their widespread use in sensing devices has been hampered by their poor stability and high production cost. Here we report the design and synthesis of a new class of antibody-mimetic materials based on functionalized peptoid nanosheets. A high density of conformationally constrained peptide and peptoid loops are displayed on the surface of free-floating nanosheets to generate an extended, multivalent two-dimensional material that is chemically and biologically stable. The nanosheet serves as a robust, high-surface area scaffold upon which to display a wide variety of functional loop sequences. The functionalized nanosheets were characterized by atomic force microscopy, X-ray diffraction, and X-ray reflectivity measurements, and were shown to serve as substrates for enzymes (protease and casein kinase II), as well as templates for the growth of defined inorganic materials (gold metal).

Biotemplating Magnetic Nanoparticles on Patterned Surfaces for Potential Use in Data Storage

Thin-films of magnetic nanoparticles (MNPs) with high coercivities are deposited onto surfaces for use in data storage applications. This usually requires specialist clean-room facilities, sputtering equipment and high temperatures to achieve the correct crystallographic phases. One possible cheaper and more environmentally friendly alternative could be to use biomolecules. Many biomineralization and biotemplating molecules have been identified that are able to template a wide range of technologically relevant materials using mild, aqueous chemistry under physiological reaction conditions. Here, we have designed a dual affinity peptide (DAP) sequence to template MNPs onto a surface. One end of the DAP has a high binding affinity for SiO2 and the other for MNPs of the L10 phase of CoPt, a high coercivity magnetic material. Images of the biomineralized substrates show that nanoparticles of CoPt are localized onto the areas that were functionalized with the biotemplating DAP. Magnetic force microscopy (MFM) plots of the biotemplated nanoparticles show that there is magnetic contrast on the patterned surface.

Single-step fabrication of patterned gold film array by an engineered multi-functional peptide

This study constitutes a demonstration of the biological route to controlled nano-fabrication via modular multi-functional inorganic-binding peptides. Specifically, we use gold- and silica-binding peptide sequences, fused into a single molecule via a structural peptide spacer, to assemble pre-synthesized gold nanoparticles on silica surface, as well as to synthesize nanometallic particles in situ on the peptide-patterned regions. The resulting film-like gold nanoparticle arrays with controlled spatial organization are characterized by various microscopy and spectroscopy techniques. The described bio-enabled, single-step synthetic process offers many advantages over conventional approaches for surface modifications, self-assembly and device fabrication due to the peptides' modularity, inherent biocompatibility, material specificity and catalytic activity in aqueous environments. Our results showcase the potential of artificially-derived peptides to play a key role in simplifying the assembly and synthesis of multi-material nano-systems in environmentally benign processes.