Electromagnetic liquid pistons for capillarity-based pumping

A Bi-Directional Acoustic Micropump Driven by Oscillating Sharp-Edge Structures

This paper proposes a bi-directional acoustic micropump driven by two groups of oscillating sharp-edge structures: one group of sharp-edge structures with inclined angles of 60° and a width of 40 μm, and another group with inclined angles of 45° and a width of 25 μm. One of the groups of sharp-edge structures will vibrate under the excitation of the acoustic wave generated with a piezoelectric transducer at its corresponding resonant frequency. When one group of sharp-edge structures vibrates, the microfluid flows from left to right. When the other group of sharp-edge structures vibrates, the microfluid flows in the opposite direction. Some gaps are designed between the sharp-edge structures and the upper surface and the bottom surface of the microchannels, which can reduce the damping between the sharp-edge structures and the microchannels. Actuated with an acoustic wave of a different frequency, the microfluid in the microchannel can be driven bidirectionally by the inclined sharp-edge structures. The experiments show that the acoustic micropump, driven by oscillating sharp-edge structures, can produce a stable flow rate of up to 125 μm/s from left to right, when the transducer was activated at 20.0 kHz. When the transducer was activated at 12.8 kHz, the acoustic micropump can produce a stable flow rate of up to 85 μm/s from right to left. This bi-directional acoustic micropump, driven by oscillating sharp-edge structures, is easy to operate and shows great potential in various applications.

Droplet Manipulation under a Magnetic Field: A Review

The magnetic manipulation of droplets is one of the emerging magnetofluidic technologies that integrate multiple disciplines, such as electromagnetics, fluid mechanics and so on. The directly driven droplets are mainly composed of ferrofluid or liquid metal. This kind of magnetically induced droplet manipulation provides a remote, wireless and programmable approach beneficial for research and engineering applications, such as drug synthesis, biochemistry, sample preparation in life sciences, biomedicine, tissue engineering, etc. Based on the significant growth in the study of magneto droplet handling achieved over the past decades, further and more profound explorations in this field gained impetus, raising concentrations on the construction of a comprehensive working mechanism and the commercialization of this technology. Current challenges faced are not limited to the design and fabrication of the magnetic field, the material, the acquisition of precise and stable droplet performance, other constraints in processing speed and so on. The rotational devices or systems could give rise to additional issues on bulky appearance, high cost, low reliability, etc. Various magnetically introduced droplet behaviors, such as deformation, displacement, rotation, levitation, splitting and fusion, are mainly introduced in this work, involving the basic theory, functions and working principles.

Biomimetic models of the human eye, and their applications

Replicating the functionality of the human eye has been a challenge for more than a century, creating a great wealth of biomimetic and bioinspired devices, and providing ever improving models of the eye for myriad research purposes. As improvements in microelectronics have proceeded, individual components of the eye have been replicated, and models of the optical behaviour of the eye have improved. This review explores both work developed for improving medical components, with an ultimate aim of a fully functioning prosthetic eye, and work looking at improving existing devices through biomimetic means. It is hoped that this holistic approach to the subject will aid in the cross pollination of ideas between the two research foci. The review starts by summarising the reported measurements of optical parameters of various components of the eye. It then charts the development of individual bionic components. Particular focus is put on the development of bionic and biomimetic forms of the two main adaptive components of the eye, namely the lens and the iris, and the challenges faced in modelling the light sensitive retina. Work on each of these components is thoroughly reviewed, including an overview of the principles behind the many different approaches used to mimic the functionality, and discussion of the pros and cons of each approach. This is concluded by an overview of several reported models of the complete or semi-complete eye, including details of the components used and a summary of the models' functionality. Finally, some consideration is given to the direction of travel of this field of research, and which existing approaches are likely to bring us closer to the long term goal of a fully functional analogue of the eye.

A practical microfluidic pump enabled by acoustofluidics and 3D printing

Simple and low-cost solutions are becoming extremely important for the evolving necessities of biomedical applications. Even though, on-chip sample processing and analysis has been rapidly developing for a wide range of screening and diagnostic protocols, efficient and reliable fluid manipulation in microfluidic platforms still require further developments to be considered portable and accessible for low-resource settings. In this work, we present an extremely simple microfluidic pumping device based on three-dimensional (3D) printing and acoustofluidics. The fabrication of the device only requires 3D-printed adaptors, rectangular glass capillaries, epoxy and a piezoelectric transducer. The pumping mechanism relies on the flexibility and complexity of the acoustic streaming patterns generated inside the capillary. Characterization of the device yields controllable and continuous flow rates suitable for on-chip sample processing and analysis. Overall, a maximum flow rate of ~ 12 μL/min and the control of pumping direction by frequency tuning is achieved. With its versatility and simplicity, this microfluidic pumping device offers a promising solution for portable, affordable and reliable fluid manipulation for on-chip applications.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10404-020-02411-w.

Engineering Aspheric Liquid Crystal Lenses by Using the Transmission Electrode Technique

The transmission electrode technique has been recently proposed as a versatile method to obtain various types of liquid-crystal (LC) lenses. In this work, an equivalent electric circuit and new analytical expressions based on this technique are developed. In addition, novel electrode shapes are proposed in order to generate different phase profiles. The analytical expressions depend on manufacturing parameters that have been optimized by using the least squares method. Thanks to the proposed design equations and the associated optimization, the feasibility of engineering any kind of aspheric LC lenses is demonstrated, which is key to obtain aberration-free lenses. The results are compared to numerical simulations validating the proposed equations. This novel technique, in combination with the proposed design equations, opens a new path for the design and fabrication of LC lenses and even other types of adaptive-focus lenses based on voltage control.

The capillary bistable switch constrained by pinning/wetting angles as a sensor of pressure

A droplet deposited onto an orifice in the flat smooth plate can remain in a bistable state. Such system -a droplet and a flat surface- behaves as a bistable capillary switch, which can be used for threshold detection of some system's properties, e.g., the difference in the pressure on both sides of the plate. The droplet morphology changes abruptly at a certain value of the pressure difference and shows hysteresis. The specific behavior of the system is a result of the geometrical constraints defining the curvature of the liquid droplet at both sides of the surface. These constraints can be represented either by pinning angles at both sides of the plate or by the pinning angle at one side and the contact angle at the other. The dependence of details of the droplet morphology and energy on the difference in pressure at both sides of the plate is calculated by means of the semi-analytical model and Surface Evolver simulations.

Recent Advances in Adaptive Liquid Crystal Lenses

An adaptive-focus lens is a device that is capable of tuning its focal length by means of an external stimulus. Numerous techniques for the demonstration of such devices have been reported thus far. Moving beyond traditional solutions, several new approaches have been proposed in recent years based on the use of liquid crystals, which can have a great impact in emerging applications. This work focuses on the recent advances in liquid crystal lenses with diameters larger than 1 mm. Recent demonstrations and their performance characteristics are reviewed, discussing the advantages and disadvantages of the reported technologies and identifying the challenges and future prospects in the active research field of adaptive-focus liquid crystal (LC) lenses.

Actuation of adaptive liquid microlens droplet in microfluidic devices: A review

A significant growth of research on adaptive liquid lens is achieved over the past decades, and the field is still attracting increasing attentions, focusing on the transition from the current stage to the commercialized stage. The challenges faced are not limited to fabrication, material, small tuning range in focal lengths, additional control systems, limitations in special actuation methods and so on. In addition, the use of external driving parts or systems induce extra problem on bulky appearance, high cost, low reliability etc. Therefore, adaptive liquid lens will be an interesting research focus in both microfluidics and optofluidics science. This review attempts to summarize and focus on the droplet profile deformation under different driving mechanisms in tunable liquid microlens as well as the application in cameras, cell phone and so on. The driving techniques are generally categorized in terms of mechanisms and driving sources.

Dual-mode reconfigurable focusing using the interface of aqueous and dielectric liquids

An optofluidic lens serves as a highly reconfigurable device to manipulate light by using a smoothly curved interface between immiscible liquids. Here we propose a dielectro-optofluidic lens (DOL) that is capable of dual-mode reconfigurable focusing. In this DOL, light focuses through a dielectric liquid-aqueous liquid interface where movement and deformation of the interface are achieved by electrohydrodynamic (EHD) actuation. We initially perform alternating current-EHD actuation of the dielectric liquid to obtain its benefit of frequency-dependent behavior and to prevent electrolysis of the aqueous liquid. Our DOL uniquely operates in two modes, namely, an oscillation mode in the low-frequency regime (<1 Hz) with a 10 mm focus-tuning range and a static mode in the high-frequency regime (>10 Hz) with a 1 mm focus-tuning range, which are easily modulated on demand by the frequency range of the applied voltage. We successfully conduct proof-of-concept experiments, including extending the depth-of-field using the oscillation mode to clearly visualize thick targets, and integrating the proposed DOL with a photoacoustic microscope using the static mode to adjust the focal point.

Wide and fast focus-tunable dielectro-optofluidic lens via pinning of the interface of aqueous and dielectric liquids

Electrohydrodynamic actuation of dielectric liquid enables the development of an efficient focus-tunable dielectro-optofluidic lens (DOL) by manipulating a liquid-liquid interface. However, practical utilization of the previous DOL is hindered by its narrow and slow focus-tunability due to the direct movement of the interface. Here, we propose pinning the interface to directly change the interface shape while preventing the interface movement. The newly designed DOL exploits sudden changes in the channel diameter and the surface wettability to firmly pin the interface. Our results demonstrate that the tuning range of the DOL from -40 to +35 diopters is achieved in 0.1 s.

A Perspective on the Rise of Optofluidics and the Future

In the recent past, the field of optofluidics has thrived from the immense efforts of researchers from diverse communities. The concept of optofluidics combines optics and microfluidics to exploit novel properties and functionalities. In the very beginning, the unique properties of liquid, such as mobility, fungibility and deformability, initiated the motivation to develop optical elements or functions using fluid interfaces. Later on, the advancements of microelectromechanical system (MEMS) and microfluidic technologies enabled the realization of optofluidic components through the precise manipulation of fluids at microscale thus making it possible to streamline complex fabrication processes. The optofluidic system aims to fully integrate optical functions on a single chip instead of using external bulky optics, which can consequently lower the cost of system, downsize the system and make it promising for point-of-care diagnosis. This perspective gives an overview of the recent developments in the field of optofluidics. Firstly, the fundamental optofluidic components will be discussed and are categorized according to their basic working mechanisms, followed by the discussions on the functional instrumentations of the optofluidic components, as well as the current commercialization aspects of optofluidics. The paper concludes with the critical challenges that might hamper the transformation of optofluidic technologies from lab-based procedures to practical usages and commercialization.

Performance of a microscope with an embedded oscillating pinned-contact liquid lens

A liquid drop with pinned contact lines in a through-hole behaves as a natural oscillator with low dissipation, while serving as a biconvex lens with a variable focal distance. By embedding such an oscillating liquid lens into a microscope and analyzing it, we show that the object distance of the system can rapidly scan a range of over 1 mm, while maintaining a resolving power comparable to that of the base microscope configuration. Using this scanning object plane enabled by the liquid lens, we show how moving microscopic objects can be observed in three spatial dimensions and time.

A reliable and programmable acoustofluidic pump powered by oscillating sharp-edge structures

We present a programmable acoustofluidic pump that utilizes the acoustic streaming effects generated by the oscillation of tilted sharp-edge structures. This sharp-edge-based acoustofluidic pump is capable of generating stable flow rates as high as 8 μL min(-1) (~76 Pa of pumping pressure), and it can tune flow rates across a wide range (nanoliters to microliters per minute). Along with its ability to reliably produce stable and tunable flow rates, the acoustofluidic pump is easy to operate and requires minimum hardware, showing great potential for a variety of applications.

Recent progress in ferrofluids research: novel applications of magnetically controllable and tunable fluids

Ferrofluids are suspensions of magnetic nanoparticles that have the attractive feature of being controlled by applied magnetic fields. Ferrofluids have been studied for decades in an ever growing number of applications that take advantage of their response to applied magnetic fields. Here, we provide a summary of recent advances in established and emerging applications of ferrofluids, including applications in optics, sensors, actuators, seals, lubrication, and static/dynamic magnetically driven assembly of structures.

Ferrofluid-based reconfigurable optofluidic switches for integrated sensing and digital data storage

We present a low-cost, reconfigurable, parallel optofluidic switch that exploits the optical and magnetic properties of water-based ferrofluid. Each switch is composed of an integrated waveguide orthogonally crossing a microfluidic channel containing high-index oil and a ferrofluid plug. The switch is turned ON or OFF by movement of the ferrofluid plug. In contrast to conventional integrated switches, ferrofluid plugs act as switching mechanisms that are portable and reconfigurable. Switches are demonstrated in parallel geometries for single and multimode waveguides. Possible applications include optofluidic memory, multiplexed sensing for lab-on-chip, or frequency-encoded laser excitation.

Temperature effects on dielectric liquid lenses

The thermal stability of dielectric liquid lenses is studied by measuring the focal length at different temperatures. Two types of liquids lenses are investigated: Type-I (SL-5267/glycerol) and Type-II (glycerol/ BK7 matching liquid). A threshold-like behavior is found. Below the threshold temperature, the focal length is temperature insensitive. Above the threshold, the focal length changes exponentially with the temperature. Both refractive index and surface profile are responsible for the focal length change, although the former decreases linearly with the temperature. The threshold temperature of Type-I and Type-II liquid lens are 60°C and 40°C, respectively. Type-I lens shows a good temperature stability in a wide range. Moreover, the lens can recover to its original state even though it is operated at a high temperature.

Liquid crystal pump

We report a dielectrically actuated liquid crystal (LC) pump. A small volume of LC forms a pillar-like droplet in a cylindrical hole which partially touches the bottom substrate with embedded interdigitated electrodes. By applying a voltage, the LC droplet can be largely stretched along the electrode direction by the generated dielectric force, which in turn exerts a pressure to displace a small volume of fluid on the opposite side of the chamber. Once the voltage is removed, the LC droplet returns to its initial state. The LC droplet with such a reciprocating movement behaves like a pump. In this work, the actuation mechanism of the LC pump is presented and the performance evaluated experimentally. Our LC pump has the following advantages: simple structure, easy fabrication, compact size, high precision, low power consumption, and relatively fast response time. It is promising for applications in lens actuators, biotechnology, drug delivery, and other lab-on-a-chip devices.

Adaptive liquid lens actuated by liquid crystal pistons

An adaptive liquid lens actuated by liquid crystal (LC) pistons is demonstrated. It adopts fluid pressure introduced by the reciprocating movement of LC droplets to regulate the liquid-air interface which, in turn, changes the optical power of the resultant liquid lens. The competitive features are compact size, simple fabrication, good optical performance, reasonably fast response time and low power consumption. Since the actuation power can be enhanced by increasing the number of LC pistons rather than the operating voltages, it is possible to significantly actuate a large-aperture lens or lens array at a relatively low operating voltage.

Embedded adaptive optics for ubiquitous lab-on-a-chip readout on intact cell phones

The evaluation of disposable lab-on-a-chip (LOC) devices on cell phones is an attractive alternative to migrate the analytical strength of LOC solutions to decentralized sensing applications. Imaging the micrometric detection areas of LOCs in contact with intact phone cameras is central to provide such capability. This work demonstrates a disposable and morphing liquid lens concept that can be integrated in LOC devices and refocuses micrometric features in the range necessary for LOC evaluation using diverse cell phone cameras. During natural evaporation, the lens focus varies adapting to different type of cameras. Standard software in the phone commands a time-lapse acquisition for best focal selection that is sufficient to capture and resolve, under ambient illumination, 50 μm features in regions larger than 500 × 500 μm². In this way, the present concept introduces a generic solution compatible with the use of diverse and unmodified cell phone cameras to evaluate disposable LOC devices.

Optical performance of an oscillating, pinned-contact double droplet liquid lens

Liquid droplets can produce spherical interfaces that are smooth down to the molecular scale due to surface tension. For typical gas/liquid systems, spherical droplets occur on the millimeter and smaller scales. By coupling two droplets, with contact lines pinned at each edge of a cylindrical hole through a plate, a biconvex lens is created. Using a sinusoidal external pressure, this double droplet system (DDS) can be readily forced to oscillate at resonance. The resulting change in the curvatures of the droplets produces a time-varying focal length. Such an oscillating DDS was introduced in 2008 [Nat. Photonics 2, 610 (2008)]. Here we provide a more comprehensive description of the system's optical performance, showing the effects of liquid volume and driving pressure amplitude on the back focal distance, radii of curvature, object distance, and image sharpness.

Electrowetting driven optical switch and tunable aperture

We demonstrate an electrowetting based optical switch with tunable aperture. Under the influence of an electric field a non-transparent oil film can be replaced locally by a transparent water drop creating an aperture through which light can pass. Its diameter can be tuned between 0.2 and 1.2 mm by varying the driving voltage or frequency. The on and off response time of the switch is in the order of 2 and 120 ms respectively. Finally we demonstrate an array of switchable apertures that can be tuned independently or simultaneously.