Mesoporous Silica-Based Materials with Bactericidal Properties

Bacterial infections are the main cause of chronic infections and even mortality. In fact, due to extensive use of antibiotics and, then, emergence of antibiotic resistance, treatment of such infections by conventional antibiotics has become a major concern worldwide. One of the promising strategies to treat infection diseases is the use of nanomaterials. Among them, mesoporous silica materials (MSMs) have attracted burgeoning attention due to high surface area, tunable pore/particle size, and easy surface functionalization. This review discusses how one can exploit capacities of MSMs to design and fabricate multifunctional/controllable drug delivery systems (DDSs) to combat bacterial infections. At first, the emergency of bacterial and biofilm resistance toward conventional antimicrobials is described and then how nanoparticles exert their toxic effects upon pathogenic cells is discussed. Next, the main aspects of MSMs (e.g., physicochemical properties, multifunctionality, and biosafety) which one should consider in the design of MSM-based DDSs against bacterial infections are introduced. Finally, a comprehensive analysis of all the papers published dealing with the use of MSMs for delivery of antibacterial chemicals (antimicrobial agents functionalized/adsorbed on mesoporous silica (MS), MS-loaded with antimicrobial agents, gated MS-loaded with antimicrobial agents, MS with metal-based nanoparticles, and MS-loaded with metal ions) is provided.

Polydimethylsiloxane incorporated with reduced graphene oxide (rGO) sheets for wound dressing application: Preparation and characterization

Toward fabricating a novel multifunctional wound dressing material, we incorporated a series of contents of reduced graphene oxide (rGO) sheets into polydimethylsiloxane (PDMS) matrix to prepare the rGO-PDMS composite membrane and be used for wound dressing. The pore structure, dispersion of rGO, physical properties, water vapor transmission rate (WVTR), cytotoxicity and antibacterial activity were studied. Finally, the effect of the rGO-PDMS composite membrane on wound healing was investigated on a murine full-thickness skin wound model. The rGO-PDMS composite membrane exhibited bionic performance (ordered pore structure and suitable WVTR), improved mechanical properties, good compatibility and effective antibacterial activity. In vivo experiment indicated that the rGO-PDMS composite membrane could accelerate wound healing via enhancement of the re-epithelialization and granulation tissue formation. These findings suggest that rGO doping PDMS uniquely resulted in a multifunctional material for potential use in wound dressing.

Exploration of Macroporous Polymeric Sponges As Drug Carriers

Achieving high drug loading capacity and controlling drug delivery are two main challenges related to drug carriers. In this study, polymeric macroporous sponges with very high pore volume and large porosity are introduced as a new-type of drug carrier. Due to the high pore volume (285 and 166 cm³/g for the sponges with densities of 3.5 and 6.0 mg/cm³, respectively), the sponges exhibit very high drug loading capacities with average values of 1870 ± 114 and 2697 ± 73 mg/g in the present study, which is much higher than the meso and microporous drug carriers (<1500 mg/g). In order to control the release profiles, an additional poly(p-xylylene) (PPX) coating was deposited by chemical vapor deposition on the drug loaded sponge. Consequently, Artemisone (ART) release in the aqueous medium could be retarded, depending on the density of the sponge and the thickness of the coating. In future, the new 3D polymeric sponges would be highly beneficial as drug carriers for the programmed release of drugs for treatment of chronic diseases.

Flexible Hierarchical ZrO2 Nanoparticle-Embedded SiO2 Nanofibrous Membrane as a Versatile Tool for Efficient Removal of Phosphate

Functional nanoparticles modified silica nanofibrous materials with good flexibility, a hierarchical mesoporous structure, and excellent durability would have broad applications in efficient removal of contaminants, yet have proven to be enormously challenging to construct. Herein, we reported a strategy for rational design and fabricating flexible, hierarchical mesoporous, and robust ZrO₂ nanoparticle-embedded silica nanofibrous membranes (ZrO₂/SiO₂ NM) for phosphate removal by combining the chitosan dip-coating method with the electrospinning technique. Our approach allows ZrO₂ nanoparticles to be in situ firmly and uniformly anchored onto SiO₂ nanofibers to drastically enlarge the specific surface area and porosity of membranes. Therefore, the resultant ZrO₂/SiO₂ NM exhibited a prominent removal efficiency of 85% and excellent adsorption amount of 43.8 mg P g^-1 membranes in 30 min toward phosphates. Furthermore, the removal performance toward different types of phosphates revealed that the resultant membranes also could be used to remove phosphates in detergent and fertilizer water samples. More importantly, the membranes with good flexibility could directly be taken out from solution after use without any post-treatment. Such a simple and intriguing approach for fabricating nanofibrous membranes may provide a new platform for constructing membranes with superb phosphate removal performance.

The microfluidic synthesis of composite hollow microfibers for K+-responsive controlled release based on a host–guest system

Composite PLGA hollow microfibers with K⁺-responsive controlled-release characteristics are developed for drug delivery.

Pickering high internal phase emulsion-based hydroxyapatite-poly(ε-caprolactone) nanocomposite scaffolds

Biocompatible, biodegradable and bioactive nanocomposite (NC) scaffolds with well-defined interconnected porous structures have attracted increasing attention in bone tissue engineering. In this work, we develop a facile method to fabricate poly(l-lactic acid)-modified hydroxyapatite (g-HAp)-poly(ε-caprolactone) (PCL) NC porous scaffolds by solvent evaporation based on water-in-dichloromethane (W/O) Pickering high internal phase emulsion (HIPE) templates, which are stabilized using g-HAp nanoparticles. The resultant porous scaffolds demonstrate interconnected and rough pore structures, which can be adjusted readily by varying g-HAp nanoparticle concentration, PCL concentration and the internal phase volume fraction. Moreover, the investigation of mechanical properties and in vitro biomineralization activity shows that the Young's modulus, compressive stress and bioactivity of the fabricated porous scaffolds are significantly enhanced upon increasing the g-HAp nanoparticle concentration. In addition, in vitro drug release studies of the porous scaffolds using ibuprofen (IBU) as a model drug show that the loaded IBU displays a sustained release profile. In vitro cell culture assays confirm that mouse bone mesenchymal stem cells can adhere, spread, and proliferate on the porous scaffolds, indicating that the porous scaffolds are biocompatible. All these results suggest that the fabricated g-HAp-PCL NC scaffolds have a promising potential for bone tissue engineering application.

Electrospun polyvinyl alcohol/carbon dioxide modified polyethyleneimine composite nanofiber scaffolds

A novel biocompatible polyvinyl alcohol/carbon dioxide modified polyethyleneimine (PVA/PEI-CO2) composite nanofiber was fabricated by a green and facile protocol, which reduces the cytotoxicity of PEI through the surface modification of the PEI with CO2. The 13C NMR spectrum, elemental analysis, and TGA show that CO2 has been incorporated in the PEI surface resulting in a relatively stable structure. The resulting PVA/PEI-CO2 composite nanofibers have been characterized by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), contact angle, and scanning electron microscopy (SEM). The results show that the average diameters of the nanofibers range from 265 ± 53 nm to 423 ± 80 nm. The cytotoxicity of PVA/PEI-CO2 composite nanofibers was assessed by cytotoxicity evaluation using the growth and cell proliferation of normal mice Schwann cells. SEM and the MTT assay demonstrated the promotion of cell growth and proliferation on the PVA/PEI-CO2 composite scaffold. It suggests that PEI-CO2 can have tremendous potential applications in biological material research.

Effect of Cosurfactants on Pore Sizes of Continuous Highly Ordered Mesoporous Silica Nanofibers

Highly ordered mesoporous silica nanofibers with no core/sheath structure were prepared by coaxial electrospinning combined with the solvent evaporation induced surfactant assembly process. The mesoporous structures have been proved and the effect of different cosurfactants on pore sizes of mesoporous silica nanofibers has been investigated.

Nanocomposites of silver nanoparticles embedded in glass nanofibres obtained by laser spinning

Nanocomposites made of non-woven glass fibres with diameters ranging from tens of nanometers up to several micrometers, containing silver nanoparticles, were successfully fabricated by the laser spinning technique. Pellets of a soda-lime silicate glass containing silver nanoparticles with varying concentrations (5 and 10 wt%) were used as a precursor. The process followed to obtain the silver nanofibres did not agglomerate significantly the metallic nanoparticles, and the average particle size is still lower than 50 nm. This is the first time that glass nanofibres containing silver nanoparticles have been obtained following a process different from electrospinning of a sol-gel, thus avoiding the limitations of this method and opening a new route to composite nanomaterials. Antibacterial efficiency of the nanosilver glass fibres, tested against one of the most common gram negative bacteria, was greater than 99.99% compared to the glass fibres free of silver. The silver nanoparticles are well-dispersed not only on the surface but are also embedded into the uniform nanofibres, which leads to a long lasting durable antimicrobial effect. All these novel characteristics will potentially open up a whole new range of applications.

Collagen-templated bioactive titanium dioxide porous networks for drug delivery

A Type I collagen gel was used as a template for fabricating porous titanium dioxide networks. Conducting sol-gel chemistry within the template, followed by a mild solvothermal treatment (selected TiO(2)-collagen hybrids only), and then calcination to remove the template, produced anatase TiO(2) porous networks composed of mesoporous fibers. The collagen morphology was retained. TiO(2) fibers had walls up to 300 nm in thickness and hollow cores where the template was removed. Crystallite size, specific surface area (12.3-110 m(2) g(-1)), mesopore diameter (4.2-8.8 nm), and pore volume of the networks varied under different synthesis conditions; solvothermal treatment of the hybrid doubled the surface area and mesopore diameter of the final material. Biomineralization was studied by immersion in a simulated body fluid. All networks displayed in vitro bioactivity, and hence potential bone-bonding capability, with apatite clusters growing on the fibers. Drug delivery was assessed by the adsorption and release of anti-inflammatory ibuprofen. Ibuprofen was stored both at the fiber surface and in mesopores below 15 nm in diameter, while release was a sustained diffusion process. The network solvothermally treated as a hybrid adsorbed ibuprofen up to 58.9 mg g(-1). The TiO(2) networks compared favorably with literature drug delivery vehicles when ibuprofen loading was normalized against surface area. Therefore, porous TiO(2) networks have potential as materials for biomedical applications.