Unveiling the Role and Stabilization Mechanism of Cu+ into Defective Ce-MOF Clusters during CO Oxidation

Copper single-site catalysts supported on Zr-based metal-organic frameworks (MOFs) are well-known systems in which the nature of the active sites has been deeply investigated. Conversely, the redox chemistry of the Ce-counterparts is more limited, because of the often-unclear Cu2+/Cu+ and Ce4+/Ce3+ pairs behavior. Herein, we studied a novel Cu2+ single-site catalyst supported on a defective Ce-MOF, Cu/UiO-67(Ce), as a catalyst for the CO oxidation reaction. Based on a combination of in situ DRIFT and operando XAS spectroscopies, we established that Cu+ sites generated during catalysis play a pivotal role. Moreover, the oxygen vacancies associated with Ce3+ sites and presented in the defective Cu/UiO-67(Ce) material are able to activate the O2 molecules, closing the catalytic cycle. The results presented in this work open a new route for the design of active and stable single-site catalysts supported on defective Ce-MOFs.

Mechanistic Insights of Ethylene Polymerization on Phillips Chromium Catalysts

Silica-supported chromium oxide catalysts, also named Phillips chromium catalysts (PCCs), provide more than half of the world's production of high- and medium-density polyethylenes. PCCs are usually prepared in the Cr(VI)/SiO2 form, which is subjected to reductive activation. It has been explicitly proven that CO reduces Cr(VI) to Cr(II) species that initiate ethylene polymerization; ethylene activates Cr(VI) sites as well, but the nature of the catalytic species is complicated by the presence of the ethylene oxidation products. It is widely accepted that the catalytic species are of a Cr(III)-alkyl nature, but this common assumption faces the challenge of "extra" hydrogen: the formation of similar species under the action of even-electron reducing agents requires an additional H atom. Relatively recently, it was found that saturated hydrocarbons can also activate CrOx/SiO2, and alkyl fragments turn out to be bonded with a polyethylene chain. In recent years, there have been numerous experimental and theoretical studies of the structure and chemistry of PCCs at the different stages of preparation and activation. The use of modern spectral methods (such as extended X-ray absorption fine structure (EXAFS), X-ray absorption near-edge structure (XANES), and others); operando IR, UV-vis, EPR, and XAS spectroscopies; and theoretical approaches (DFT modeling, machine learning) clarified many essential aspects of the mechanisms of CrOx/SiO2 activation and catalytic behavior. Overall, the Cosse-Arlman mechanism of polymerization on Cr(III)-alkyl centers is confirmed in many works, but its theoretical support required the development of nontrivial and contentious mechanistic concepts of Cr(VI)/SiO2 or Cr(II)/SiO2 activation. On the other hand, conflicting experimental data continue to be obtained, and certain mechanistic concepts are being developed with the use of outdated models. Strictly speaking, the main question of what type of catalytic species, Cr(II), Cr(III), or Cr(IV), comes into polymerization still has not received an unambiguous answer. The role of the chemical nature of the support-through the prism of the nature, geometry, and distribution of the active sites-is also not clear in depth. In the present review, we endeavored to summarize and discuss the recent studies in the field of the preparation, activation, and action of PCCs, with a focus on existing contradictions in the interpretation of the experimental and theoretical results.

Research progress on the catalytic and thermal decomposition of ammonium dinitramide (ADN)

Ammonium dinitramide (NH4N(NO3)2, ADN) is regarded as a promising oxidizer due to its low signature and high specific impulse. Generally, ADN undergoes exothermic decomposition above 140 °C accompanied by the byproduct of ammonium nitrate (AN). The inevitable endothermic decomposition of AN decreases the overall heat release, and so there is a need to develop efficient catalysts to guide ADN decomposition along desired pathways with a lower decomposition temperature and higher heat release. A suitable catalyst should be able to withstand the harsh conditions in a thruster to achieve a stable thrust force, which poses a huge obstacle for manufacturing a stable and active catalyst. This review gives a comprehensive summary of the thermal and catalytic decomposition pathways of ADN for the first time, which is expected to deepen the understanding of its reaction mechanism and provide useful guidance for designing prospective catalysts toward efficient ADN decomposition.

MAO- and Borate-Free Activating Supports for Group 4 Metallocene and Post-Metallocene Catalysts of α-Olefin Polymerization and Oligomerization

Modern industry of advanced polyolefins extensively uses Group 4 metallocene and post-metallocene catalysts. High-throughput polyolefin technologies demand the use of heterogeneous catalysts with a given particle size and morphology, high thermal stability, and controlled productivity. Conventional Group 4 metal single-site heterogeneous catalysts require the use of high-cost methylalumoxane (MAO) or perfluoroaryl borate activators. However, a number of inorganic phases, containing highly acidic Lewis and Brønsted sites, are able to activate Group 4 metal pre-catalysts using low-cost and affordable alkylaluminums. In the present review, we gathered comprehensive information on MAO- and borate-free activating supports of different types and discussed the surface nature and chemistry of these phases, examples of their use in the polymerization of ethylene and α-olefins, and prospects of the further development for applications in the polyolefin industry.

Stimuli-Responsive Silica Silanol Conjugates: Strategic Nanoarchitectonics in Targeted Drug Delivery

The design of novel drug delivery systems is exceptionally critical in disease treatments. Among the existing drug delivery systems, mesoporous silica nanoparticles (MSNs) have shown profuse promise owing to their structural stability, tunable morphologies/sizes, and ability to load different payload chemistry. Significantly, the presence of surface silanol groups enables functionalization with relevant drugs, imaging, and targeting agents, promoting their utility and popularity among researchers. Stimuli-responsive silanol conjugates have been developed as a novel, more effective way to conjugate, deliver, and release therapeutic drugs on demand and precisely to the selected location. Therefore, it is urgent to summarize the current understanding and the surface silanols' role in making MSN a versatile drug delivery platform. This review provides an analytical understanding of the surface silanols, chemistry, identification methods, and their property-performance correlation. The chemistry involved in converting surface silanols to a stimuli-responsive silica delivery system by endogenous/exogenous stimuli, including pH, redox potential, temperature, and hypoxia, is discussed in depth. Different chemistries for converting surface silanols to stimuli-responsive bonds are discussed in the context of drug delivery. The critical discussion is culminated by outlining the challenges in identifying silanols' role and overcoming the limitations in synthesizing stimuli-responsive mesoporous silica-based drug delivery systems.

Computational investigation of α-SiO2 surfaces as a support for Pd

The properties of a supported metal catalyst depend crucially on the interaction between the active metal and the support. A case in point is Pd supported on silica, Pd/SiO₂, which is widely used in oxidation catalysis. There is a need for a broad range of computational models that describe the interaction of Pd with silica surfaces so that active site models can be proposed and tested. In this work, we create well-defined, reproducible, periodic models of SiO₂ surfaces and investigate their interaction with Pd using dispersion-corrected DFT. We use crystalline α-SiO₂ as a useful starting point for creating and estimating the adsorption properties of metals on SiO₂ surfaces, which can represent the specific isolated functional groups present on more complex amorphous silica surfaces. We have modelled α-SiO₂ (001), (100) and (101) surfaces containing isolated siloxane and silanol functional groups and estimated their affinity towards the adsorption of Pd atoms regarding an isolated gaseous Pd atom and the fcc Pd solid. This provides additional information on the ease with which Pd can be dispersed on the surfaces in question. From our model, we characterise the surface energies of the α-SiO₂ (hkl) surfaces and calculate the geometries of the Pd₁/α-SiO₂ (hkl) adsorption site on each surface. We estimate that Pd₁(g) will prefer to adsorb close to strained four-membered siloxane rings or on a vicinal silanol group of α-SiO₂ (101).

Surface and Interface Coordination Chemistry Learned from Model Heterogeneous Metal Nanocatalysts: From Atomically Dispersed Catalysts to Atomically Precise Clusters

The surface and interface coordination structures of heterogeneous metal catalysts are crucial to their catalytic performance. However, the complicated surface and interface structures of heterogeneous catalysts make it challenging to identify the molecular-level structure of their active sites and thus precisely control their performance. To address this challenge, atomically dispersed metal catalysts (ADMCs) and ligand-protected atomically precise metal clusters (APMCs) have been emerging as two important classes of model heterogeneous catalysts in recent years, helping to build bridge between homogeneous and heterogeneous catalysis. This review illustrates how the surface and interface coordination chemistry of these two types of model catalysts determines the catalytic performance from multiple dimensions. The section of ADMCs starts with the local coordination structure of metal sites at the metal-support interface, and then focuses on the effects of coordinating atoms, including their basicity and hardness/softness. Studies are also summarized to discuss the cooperativity achieved by dual metal sites and remote effects. In the section of APMCs, the roles of surface ligands and supports in determining the catalytic activity, selectivity, and stability of APMCs are illustrated. Finally, some personal perspectives on the further development of surface coordination and interface chemistry for model heterogeneous metal catalysts are presented.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Tuning the catalytic acidity in Al2O3 nanofibers with mordenite nanocrystals for dehydration reactions

The chemical and structural properties of Al2O3 are tuned for dehydration reactions. The synergy between the structured Al2O3 shaped as nanofiber and the acid site nature of the zeolite mordenite in the nanofiber improves the dehydration reaction.

High-loading Ga-exchanged MFI zeolites as selective and coke-resistant catalysts for nonoxidative ethane dehydrogenation

A high-loading Ga-exchanged MFI zeolite was developed for efficient ethane dehydrogenation. Its high catalytic performance is ascribed to both the low amount of Brønsted acid sites and the major formation of [GaH2]+ ions among isolated Ga hydrides.

Insights into the Mechanism of Methanol Steam Reforming Tandem Reaction over CeO2 Supported Single-Site Catalysts

We demonstrated how the special synergy between a noble metal single site and neighboring oxygen vacancies provides an "ensemble reaction pool" for high hydrogen generation efficiency and carbon dioxide (CO₂) selectivity of a tandem reaction: methanol steam reforming. Specifically, the hydrogen generation rate over single site Ru₁/CeO₂ catalyst is up to 9360 mol H₂ per mol Ru per hour (579 mL_H2 g_Ru^-1 s^-1) with 99.5% CO₂ selectivity. Reaction mechanism study showed that the integration of metal single site and O vacancies facilitated the tandem reaction, which consisted of methanol dehydrogenation, water dissociation, and the subsequent water gas shift (WGS) reaction. In addition, the strength of CO adsorption and the reaction activation energy difference between methanol dehydrogenation and WGS reaction play an important role in determining the activity and CO₂ selectivity. Our study paves the way for the further rational design of single site catalysts at the atomic scale. Furthermore, the development of such highly efficient and selective hydrogen evolution systems promises to deliver highly desirable economic and ecological benefits.

Hydrogen-Bonding-Induced Heterogenization of Nickel and Palladium Catalysts for Copolymerization of Ethylene with Polar Monomers

The practical synthesis of polar-functionalized polyolefins using transition-metal-catalyzed copolymerization of olefins with polar monomers is a challenge; the use of heterogeneous catalysts is little explored. Herein, we report the synthesis of heterogeneous naphthoquinone-based nickel (Ni/SiO₂ ) and palladium (Pd/SiO₂ ) catalysts through hydrogen bonding interactions of the ligands with the silica surface. Ni/SiO₂ exhibits high activities (up to 2.65×10⁶  g mol^-1  h^-1 ) during the copolymerization of ethylene with 5-hexene-1-yl-acetate, affording high-molecular-weight (M_n up to 630 000) polar-functionalized semicrystalline polyethylene (comonomer incorporation up to 2.8 mol %), along with great morphology control. The resulting copolymers possess improved surface properties and great mechanical properties. Pd/SiO₂ can mediate ethylene copolymerization with polar monomers with moderate activity to produce high-molecular-weight copolymers with tunable comonomer incorporation.

Toward development of single-atom ceramic catalysts for selective catalytic reduction of NO with NH3

Insertion of transition metal species into crystalline alumina at low temperatures is proposed to achieve the dispersion of these species at atomic level paired with exceptional textural properties. Precisely, MeAl₂O₄/γ-Al₂O₃ (Me = Mn, Fe, Co, Ni, and/or Cu) nanostructured ceramic catalysts were fabricated with ultra large mesopores (16-30 nm), and high specific surface area (180-290 m² g^-1) and pore volume (1.1-1.6 cm³ g^-1). These ceramics were applied as efficient catalysts for the selective catalytic reduction (SCR) of NO with NH₃, and their selectivity was discussed in terms of N₂O formation, an undesirable byproduct. The catalysts containing Fe, Cu, or Mn showed the highest activities, however, within different temperature ranges. Further tuning of the catalytic activity and selectivity was achieved by creating ceramic catalysts with mixed compositions, e.g., CuFe and MnFe. Upon insertion of the transition metal species into crystalline structure of alumina to maximize atom efficiency, the N₂O formation profile did not change significantly for all metal aluminates except MnAl₂O₄, indicating that these catalysts are suitable for SCR and selectively promote the reduction of NO.

Mapping the oxygen structure of γ-Al2O3 by high-field solid-state NMR spectroscopy

γ-Al₂O₃ is one of the most widely used catalysts or catalyst supports in numerous industrial catalytic processes. Understanding the structure of γ-Al₂O₃ is essential to tuning its physicochemical property, which still remains a great challenge. We report a strategy for the observation and determination of oxygen structure of γ-Al₂O₃ by using two-dimensional (2D) solid-state NMR spectroscopy at high field. 2D ¹⁷O double-quantum single-quantum homonuclear correlation NMR experiment is conducted at an ultra-high magnetic field of 35.2 T to reveal the spatial proximities between different oxygen species from the bulk to surface. Furthermore, 2D proton-detected ¹H-¹⁷O heteronuclear correlation NMR experiments allow for a rapid identification and differentiation of surface hydroxyl groups and (sub-)surface oxygen species. Our experimental results demonstrate a non-random distribution of oxygen species in γ-Al₂O₃.

γ-Al₂O₃ is widely used in catalytic processes, but understanding its detailed structure remains a challenge. The authors, using two-dimensional solid-state NMR spectroscopy at a high magnetic field, characterize the spatial proximity and connectivity between oxygen species from the bulk to the surface.

Silica-Grafted Tris(neopentyl)aluminum: A Monomeric Aluminum Solid Co-catalyst for Efficient Nickel-Catalyzed Ethene Dimerization

A silica-supported monomeric alkylaluminum co-catalyst was prepared via surface organometallic chemistry by contacting tris(neopentyl)aluminum and partially dehydroxylated silica. This system, fully characterized by solid-state ²⁷ Al NMR spectroscopy augmented by computational studies, efficiently activates (ⁿ Bu₃ P)₂ NiCl₂ towards dimerization of ethene, demonstrating comparable activity to previously reported dimeric diethylaluminum chloride supported on silica. Three types of aluminum surface species have been identified: monografted tetracoordinated Al species as well as two types of bisgrafted Al species-tetra- and pentacoordinated. Of them, only the monografted Al species is proposed to be able to activate the (ⁿ Bu₃ P)₂ NiCl₂ complex and generate the active cationic species.

Proton-Detected Multidimensional Solid-State NMR Enables Precise Characterization of Vanadium Surface Species at Natural Abundance

Heterogeneous catalysts fulfill vital roles in industrial processes; however, the nature of the catalytic surfaces, typically either containing a low abundance of active sites or being amorphous in nature, leads to difficulties when attempting to study the structure of the active sites. In this work, we show how making use of fast MAS ssNMR allows one to efficiently detect well-resolved ¹H-detected spectra of heterogeneous catalysts. This approach was applied to study the structure of surface species resulting from the grafting of VO(OⁱPr)₃ onto a partially dehydroxylated silica using the surface organometallic chemistry approach. The use of ¹H sensitivity enabled detection of various hetero- and homonuclear correlation spectra in order to study the structure of this system and to resolve the structure of the grafted vanadium complex. More specifically, VO(OⁱPr)₃ grafts through both protonolysis and opening of siloxane bridges to generate a bis-grafted species.

Cobalt-Based Fischer–Tropsch Synthesis: A Kinetic Evaluation of Metal–Support Interactions Using an Inverse Model System

Metal–support interactions in the cobalt–alumina system are evaluated using an inverse model system generated by impregnating Co3O4 with a solution of aluminum sec-butoxide in n-hexane. This results in the formation of nano-sized alumina islands on the surface of cobalt oxide. The activated model systems were kinetically evaluated for their activity and selectivity in the Fischer–Tropsch synthesis under industrially relevant conditions (220 °C, 20 bar). The kinetic measurements were complemented by H2-chemisorption, CO-TPR, and pyridine TPD. It is shown that the introduction of aluminum in the model system results in the formation of strong acid sites and enhanced CO dissociation, as evidenced in the CO-TPR. The incorporation of aluminum in the model systems led to a strong increase in the activity factor per surface atom of cobalt in the rate expression proposed by Botes et al. (2009). However, the addition of aluminum also resulted in a strong increase in the kinetic inhibition factor. This is accompanied by a strong decrease in the methane selectivity, and an increase in the desired C5+ selectivity. The observed activity and selectivity changes are attributed to the increase in the coverage of the surface with carbon with increasing aluminum content, due to the facilitation of CO dissociation in the presence of Lewis acid sites associated with the alumina islands on the catalytically active material.

Taming the stability of Pd active phases through a compartmentalizing strategy toward nanostructured catalyst supports

The design and synthesis of robust sintering-resistant nanocatalysts for high-temperature oxidation reactions is ubiquitous in many industrial catalytic processes and still a big challenge in implementing nanostructured metal catalyst systems. Herein, we demonstrate a strategy for designing robust nanocatalysts through a sintering-resistant support via compartmentalization. Ultrafine palladium active phases can be highly dispersed and thermally stabilized by nanosheet-assembled γ-Al₂O₃ (NA-Al₂O₃) architectures. The NA-Al₂O₃ architectures with unique flowerlike morphologies not only efficiently suppress the lamellar aggregation and irreversible phase transformation of γ-Al₂O₃ nanosheets at elevated temperatures to avoid the sintering and encapsulation of metal phases, but also exhibit significant structural advantages for heterogeneous reactions, such as fast mass transport and easy access to active sites. This is a facile stabilization strategy that can be further extended to improve the thermal stability of other Al₂O₃-supported nanocatalysts for industrial catalytic applications, in particular for those involving high-temperature reactions.

The design and synthesis of robust sintering-resistant nanocatalysts for high-temperature oxidation reactions remains challenging, even though the strategy of metal-support interactions has been extensively used. Here, the authors demonstrate an alternative strategy for designing robust nanocatalysts through a sintering-resistant support.

The effects of active site and support on hydrogen elimination over transition-metal-functionalized yttria-decorated metal–organic frameworks

Transition-metal catalysts supported on a metal–organic framework have been screened computationally to reveal the best catalytic candidates for hydrogen elimination reactions, which are critical in many catalytic cycles.

Green synthesis of mesoporous γ-Al2O3 from coal fly ash with simultaneous on-site utilization of CO2

Mesoporous Al₂O₃ with crystalline framework walls has expanded all over the world due to the various potential applications especially in catalysis. Here, we develop a green and facile approach for the conversion of coal fly ash (CFA) into ordered mesoporous γ-Al₂O₃. The practical and promising lime-sinter method was comprehensively studied for the extraction of aluminum from CFA as a first step. The extraction efficiency of aluminum could reach up to 87.42%, through calcining with CaCO₃ at 1390°C for 1 h and then dissolving in Na₂CO₃ solution at 70°C for 0.5 h. Combined with the urgent demand for CO₂ emission reduction, simulated purified flue gas was introduced to precipitate the Al(OH)₃ precursors without structure-directing agents for just 1 h, followed by calcining at only 400°C or 550°C. A series of characterizations were conducted to discuss the effect of precipitation temperature and calcination temperature, resulting the superior product (Al₂O₃-65/550) with high surface area (230.3 m² g^-1), crystalline γ-Al₂O₃ phase and ordered mesostructure. This proposed strategy, integrating the on-site recycling of CFA and utilization of CO₂, appears to be promising for scalable production of mesoporous γ-Al₂O₃.

Zirconium Modification Promotes Catalytic Activity of a Single-Site Cobalt Heterogeneous Catalyst for Propane Dehydrogenation

The effect of Zr modification on the catalytic activity of Co/SiO₂ was investigated for nonoxidative propane dehydrogenation. Isolated Zr on SiO₂ surface sites were prepared by organometallic synthesis using Zr(O ^t Bu)₄ as a precursor. The resulting Zr/SiO₂ support was functionalized with Co²⁺ ions via strong electrostatic adsorption. Spectroscopic (diffuse reflectance infrared Fourier transform spectroscopy, UV-vis, electron paramagnetic resonance) and microscopic characterization (transmission electron microscopy, scanning transition electron microscopy) results are consistent with single-site cobalt that preferentially associates with the mono-dispersed Zr at a variety of loadings and Co/Zr ratios. The oxidation state of Co in the as-prepared Co/SiO₂ and Co-Zr/SiO₂ was both +2 with tetrahedral and octahedral geometries, respectively. In situ X-ray absorption near edge structure and extended X-ray absorption fine structure results confirmed that the oxidation state of Co remained as +2 under reaction condition for both Co/SiO₂ and Co-Zr/SiO₂ samples and both catalysts have tetrahedral Co²⁺ as the active catalyst. Despite similar Co coordination environments, the catalytic activity and selectivity was significantly improved by the Zr modification of the silica support versus Co/SiO₂. This was attributed to the change in oxygen donor ability and Co-O bond strength of the ≡SiO-Zr-O sites of Co-Zr/SiO₂ compared with the ≡SiO- ligands in Co/SiO₂. These results show that tuning of the support SiO₂ oxygen donation ability by use of an anchoring site (e.g., ≡SiO-Zr-O^-) can be used to alter both rate and selectivity of propane dehydrogenation with single-site heterogeneous catalysts. These results also show some preference for Co²⁺ active sites to associate with ≡SiO-Zr-O^- sites over ≡SiO-.

Probing the surface of γ-Al2O3 by oxygen-17 dynamic nuclear polarization enhanced solid-state NMR spectroscopy

γ-Al2O3 is an important catalyst and catalyst support of industrial interest. Its acid/base characteristics are correlated to the surface structure, which has always been an issue of concern. In this work, the complex (sub-)surface oxygen species on surface-selectively labelled γ-Al2O3 were probed by 17O dynamic nuclear polarization surface-enhanced NMR spectroscopy (DNP-SENS). Direct 17O MAS and indirect 1H-17O cross-polarization (CP)/MAS DNP experiments enable observation of the (sub-)surface bare oxygen species and hydroxyl groups. In particular, a two-dimensional (2D) 17O 3QMAS DNP spectrum was for the first time achieved for γ-Al2O3, in which two O(Al)4 and one O(Al)3 bare oxygen species were identified. The 17O isotropic chemical shifts (δcs) vary from 56.7 to 81.0 ppm and the quadrupolar coupling constants (CQ) range from 0.6 to 2.5 MHz for the three oxygen species. The coordinatively unsaturated O(Al)3 species is characterized by a higher field chemical shift (56.7 ppm) and the largest CQ value (2.5 MHz) among these oxygen sites. 2D 1H → 17O HETCOR DNP experiments allow us to discriminate three bridging (Aln)-μ2-OH and two terminal (Aln)-μ1-OH hydroxyl groups. The structural features of the bare oxygen species and hydroxyl groups are similar for the γ-Al2O3 samples isotopically labelled by 17O2 gas or H217O. The results presented here show that the combination of surface-selective labelling and DNP-SENS is an effective approach for characterizing oxides with complex surface species.

Surface organometallic chemistry in heterogeneous catalysis

Surface organometallic chemistry has been reviewed with a special focus on environmentally relevant transformations (C–H activation, CO₂conversion, oxidation).

Thermal Methane Activation by the Metal-Free Cluster Cation [Si2 O4 ]

The thermal reaction of methane with the metal-free cluster cation [Si₂ O₄ ]^.+ has been examined by using Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometry. In addition to generating a methyl radical via hydrogen-atom abstraction, [Si₂ O₄ ]^.+ can selectively oxidize methane to formaldehyde. The mechanisms of these rather efficient reactions have been elucidated by high-level quantum-chemical calculations.

Understanding surface site structures and properties by first principles calculations: an experimental point of view!

Computational Chemistry is key for the molecular-level understanding of active sites in heterogeneous catalysis paving the way to the rational design and development.

Supported two- and three-dimensional vanadium oxide species on the surface of β-SiC

Dispersing two-dimensional VO_x species on β-SiC offers a new approach to scale up propane ODH.

Designing a heterogeneous Pd(ii)–NHC-based C–H activation catalyst on a self-supported coordination polymer platform

An extended Ru^II(terpy)₂-based coordination polymer provides a potential scaffold to design a self-supported, single-site Pd^II(NHC) oxidative catalyst for challenging reactions such as selective arene monohalogenation with enhanced catalytic activity compared to the homogeneous counterpart.