Controllable Anchoring of Graphitic Carbon Nitride on MnO2 Nanoarchitectures for Oxygen Evolution Electrocatalysis

The design and fabrication of eco-friendly and cost-effective (photo)electrocatalysts for the oxygen evolution reaction (OER) is a key research goal for a proper management of water splitting to address the global energy crisis. In this work, we focus on the preparation of supported MnO2/graphitic carbon nitride (g-CN) OER (photo)electrocatalysts by means of a novel preparation strategy. The proposed route consists of the plasma enhanced-chemical vapor deposition (PE-CVD) of MnO2 nanoarchitectures on porous Ni scaffolds, the anchoring of controllable g-CN amounts by an amenable electrophoretic deposition (EPD) process, and the ultimate thermal treatment in air. The inherent method versatility and flexibility afforded defective MnO2/g-CN nanoarchitectures, featuring a g-CN content and nano-organization tunable as a function of EPD duration and the used carbon nitride precursor. Such a modulation had a direct influence on OER functional performances, which, for the best composite system, corresponded to an overpotential of 430 mV at 10 mA/cm2, a Tafel slope of ≈70 mV/dec, and a turnover frequency of 6.52 × 10-3 s-1, accompanied by a very good time stability. The present outcomes, comparing favorably with previous results on analogous systems, were rationalized on the basis of the formation of type-II MnO2/g-CN heterojunctions, and yield valuable insights into this class of green (photo)electrocatalysts for end uses in solar-to-fuel conversion and water treatment.

Confined Heterojunction in Hollow-Structured TiO2 and Its Directed Effect in Photodriven Seawater Splitting

The high salinity of seawater often strongly affects the activity and stability of photocatalysts utilized for photodriven seawater splitting. The current investigation is focused on the photocatalyst H-TiO2/Cu2O, comprised of hydroxyl-enriched hollow mesoporous TiO2 microspheres containing incorporated Cu2O nanoparticles. The design of H-TiO2/Cu2O is based on the hypothesis that the respective hollow and mesoporous structure and hydrophilic surfaces of TiO2 microspheres would stabilize Cu2O nanoparticles in seawater and provide efficient and selective proton adsorption. H-TiO2/Cu2O shows hydrogen production performances of 45.7 mmol/(g·h) in simulated seawater and 17.9 mmol/(g·h) in natural seawater, respectively. An apparent quantum yield (AQY) in hydrogen production of 18.8% in water (and 14.9% in natural seawater) was obtained at 365 nm. Moreover, H-TiO2/Cu2O displays high stability and can maintain more than 90% hydrogen evolution activity in natural seawater for 30 h. A direct mass- and energy- transfer mechanism is proposed to clarify the superior performance of H-TiO2/Cu2O in seawater splitting.

Sensitivity Enhancement of Resistive Ethanol Gas Sensor by Optimized Sputtered-Assisted CuO Decoration of ZnO Nanorods

In this study, sputtered-assisted CuO-decorated ZnO nanorod (NR) gas sensors were fabricated for ethanol gas sensing studies. CuO nanoparticles have been successfully formed on ZnO nanorods by means of a physical process as the decorative metallic element. The amount of decoration affecting the sensor's performance has been optimized. Cu layers with different thicknesses of 5, 10, and 20 nm were deposited on hydrothermally grown ZnO NRs using the sputtering technique. Upon subsequent annealing, Cu was oxidized to CuO. The gas sensing studies revealed that the sensor with an initial Cu layer of 5 nm had the highest response to ethanol at 350 °C. The sensor also showed good selectivity, repeatability, and long-term stability. The enhanced ethanol sensing response of the optimized gas sensor is related to the formation of p-n heterojunction between p-type CuO and n-type ZnO and the presence of the optimal amount of CuO on the surface of ZnO NRs. The results presented in this study highlight the need for optimizing the amount of Cu deposition on the surface of ZnO NRs in order to achieve the highest response to ethanol gas.

Defect-Enriched ZnO/ZnS Heterostructures Derived from Hydrozincite Intermediates for Hydrogen Evolution under Visible Light

Introducing defect engineering into ZnO/ZnS heterojunction photocatalysts is an effective method to simultaneously improve their visible light performance and photocatalytic efficiency. Herein, a defect-enriched ZnO/ZnS heterostructure photocatalyst was synthesized through a hydrozincite [Zn₅ (OH)₆ (CO₃ )₂ ] intermediate-deriving reaction. The mechanism analysis showed that there were interstitial Zn and Zn vacancies in the hydrozincite-derived ZnO, while S vacancies and interstitial S and Zn vacancies were formed in ZnS components after calcination. These specific defect states endowed visible light response ability to both ZnO and ZnS components in the ZnO/ZnS photocatalysts. Under visible light irradiation, the photocatalytic hydrogen evolution rate of ZnO/ZnS reached 11.68 mmol h^-1  g^-1 , and under simulated sunlight irradiation, the best photocatalytic hydrogen evolution rate could reach 27.94 mmol h^-1  g^-1 , which was much higher than most previous reports. The analysis of energy band structure and photodeposition showed that the photocatalytic reduction sites were mainly on ZnS, and the photocatalytic reaction mainly followed the typical Z-type mechanism. This work presents a simple and low-cost method for the preparation of defects-enriched ZnO/ZnS-based photocatalytic materials with high photocatalytic activity and stability.

Constructing a Channel to Regulate the Electron-Transfer Behavior of CO Adsorption and Light-Driven CO Reduction by H2 over CuO-ZnO

Photocatalytic conversions of C1 molecules under mild conditions have been widely researched in many fields. Adsorption of reactants at a catalyst surface is an indispensable process for C1 conversion and thus it might play a key role in reaction behavior. Herein, for a ZnO sample without photocatalytic activity for CO + H₂ reduction, CuO is introduced into ZnO to regulate the adsorption behavior of CO on the CuO-ZnO surface and then to drive the reduction of CO by H₂ under UV irradiation. The results of gas sensitivity tests and various in situ characterization methods are as expected. Specifically, surface zinc vacancies and Cu²⁺ sites at the interface of ZnO and CuO cooperate to construct a special electron-transfer channel (Zn-O-Cu-O) for CO adsorption [CO (ads)]. A new linear adsorption mode of CO at Cu²⁺ sites occurs, and this successfully changes the electron-transfer behavior of CO (ads) from donating electrons (to ZnO) to accepting electrons (from CuO-ZnO) via electron-transfer channels and d-electrons of Cu²⁺ matching. Then, CO molecules are reduced by H₂ under UV irradiation. The strategy here provides an insight into the design of highly effective catalysts as well as an in-depth understanding of the mechanism of C1 photocatalytic conversion.

Potential of Fluoride-Containing Zinc Oxide and Copper Oxide Nanocomposites on Dentin Bonding Ability

Despite recent advances in bonding restorations, which are the basis of restorative dentistry, secondary caries are still able to form. Previously, a novel fluoride-containing zinc and copper (ZCF) nanocomposite was introduced to prevent the formation of caries due to its antibacterial activity. In this study, we studied the impact of ZCF nanoparticles on the adhesive strength of bonding restorations through micro-tensile bond strength (µTBS) testing. The impact of antibacterial and matrix metalloproteinase (MMP) inhibitors on the nanoparticles was also examined. The nanocomposites were prepared using a simple one-step homogeneous co-precipitation method at a low temperature. A self-etch adhesive was applied to 10 extracted caries-free human molars with (test group) and without (control group) the ZCF nanoparticles. This was followed by composite resin build-up and µTBS testing, MMP activity assays, and evaluation of the antibacterial effects. The results showed no significant differences in the µTBS between the ZCF and the control groups. However, the ZCF exhibited a significant inhibitory effect against MMP-2, MMP-8, and MMP-9, in addition to an antibacterial effect on Streptococcus mutans. Therefore, the present study demonstrated that the addition of ZCF nanoparticles to adhesive systems can result in MMP inhibition and antibacterial action while maintaining the mechanical properties of the bonding restorations.

Fabrication of Highly Porous and Pure Zinc Oxide Films Using Modified DC Magnetron Sputtering and Post-Oxidation

Porous films of metals and metal oxides exhibit larger surface areas and higher reactivities than those of dense films. Therefore, they have gained growing attention as potential materials for use in various applications. This study reports the use of a modified direct current magnetron sputtering method to form porous Zn-ZnO composite films, wherein a subsequent wet post-oxidation process is employed to fabricate pure porous ZnO films. The porous Zn-ZnO composite films were initially formed in clusters, and evaluation of their resulting properties allowed the optimal conditions to be determined. An oxygen ratio of 0.3% in the argon gas flow resulted in the best porosity, while a process pressure of 14 mTorr was optimal. Following deposition, porous ZnO films were obtained through rapid thermal annealing in the presence of water vapor, and the properties and porosities of the obtained films were analyzed. An oxidation temperature of 500 °C was optimal, with an oxidation time of 5 min giving a pure ZnO film with 26% porosity. Due to the fact that the films produced using this method are highly reliable, they could be employed in applications that require large specific surface areas, such as sensors, supercapacitors, and batteries.

Synergistic adsorption-photocatalytic degradation effect and norfloxacin mechanism of ZnO/ZnS@BC under UV-light irradiation

Norfloxacin (NOF) is an environmentally harmful and ubiquitous aquatic pollutant with extensive production and application. In this study, a novel composition named carbon-based composite photocatalytic material of zinc oxide and zinc sulphide (ZnO/ZnS@BC) was successfully obtained by the impregnation-roasting method to remove NOF under UV-light. Scanning electron microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and energy dispersive spectrometer characterised the composition. ZnO/ZnS was successfully decorated on the surface of biochar (BC). The pH, the ZnSO₄/PS ratio, and ions and quenchers, were investigated. High removal efficiency was obtained with a pH of 7 and a ZnSO₄/PS ratio of 1:1, and the removal ratio of NOF reached 95% within three hours; the adsorption and degradation ratios reached 46% and 49%, respectively. Fe²⁺ promoted the degradation of NOF, whereas other ions inhibited it, with NO₃^- showing the strongest inhibitory effect. Three reactive species (tert-butanol, quinone, and ammonium oxala) were identified in the catalytic system. The decreasing order of the contribution of each reactive species was: O₂^- > ·OH^- > h⁺. Additionally, a recycling experiment demonstrated the stability of the catalyst; the catalytic degradation ratio of NOF reached 78% after five successive runs. Therefore, ZnO/ZnS@BC possessed strong adsorption capacity and high ultraviolet photocatalysis ability.

ZnO/CuSCN Nano-Heterostructure as a Highly Efficient Field Emitter: a Combined Experimental and Theoretical Investigation

We report the synthesis of two-dimensional porous ZnO nanosheets, CuSCN nanocoins, and ZnO/CuSCN nano-heterostructure thin films grown on fluorine-doped tin oxide substrates via two simple and low-cost solution chemical routes, i.e., chemical bath deposition and successive ionic layer adsorption and reaction methods. Detail characterizations regarding the structural, optoelectronic, and morphological properties have been carried out, which reveal high-quality and crystalline synthesized materials. Field emission (FE) investigations performed at room temperature with a base pressure of 1 × 10^-8 mbar demonstrate superior FE performance of the ZnO/CuSCN nano-heterostructure compared to the isolated porous ZnO nanosheets and CuSCN nanocoins. For instance, the turn-on field required to draw a current density of 10 μA/cm² is found to be 2.2, 1.1, and 0.7 V/μm for the ZnO, CuSCN, and ZnO/CuSCN nano-heterostructure, respectively. The observed significant improvement in the FE characteristics (ultralow turn-on field of 0.7 V/μm for an emission current density of 10 μA/cm² and the achieved high current density of 2.2 mA/cm² at a relatively low applied electric field of 1.8 V/μm) for the ZnO/CuSCN nano-heterostructure is superior to the isolated porous ZnO nanosheets, CuSCN nanocoins, and other reported semiconducting nano-heterostructures. Complementary first-principles density functional theory calculations predict a lower work function for the ZnO/CuSCN nano-heterostructure (4.58 eV), compared to the isolated ZnO (5.24 eV) and CuSCN (4.91 eV), validating the superior FE characteristics of the ZnO/CuSCN nano-heterostructure. The ZnO/CuSCN nanocomposite could provide a promising class of FE cathodes, flat panel displays, microwave tubes, and electron sources.

Metal-free photocatalysts for hydrogen evolution

This article provides a comprehensive review of the latest progress, challenges and recommended future research related to metal-free photocatalysts for hydrogen productionviawater-splitting.

The structural and the photoelectrochemical properties of ZnO-ZnS/ITO 1D hetero-junctions prepared by tandem electrodeposition and surface sulfidation: on the material processing limits

ZnO-ZnS 1D hetero-nanostructures were prepared by an easy and scalable processing route. It consists of ZnO nanorod electrodeposition on ITO substrate and surface sulfidation by ion exchange in an aqueous Na2S solution. Increasing the treatment contact time (t c) from 8 to 48 h involves different ZnS growth mechanisms leading to different structural and microstructural rod characteristics, even if the overall size does not change significantly. Grazing X-ray diffraction, high-resolution microscopy, energy-dispersive spectrometry and X-ray photoelectron spectroscopy describe the outer surface layer as a poly- and nanocrystalline ZnS blende shell whose thickness and roughness increase with t c. The ZnO wurtzite-ZnS blende interface goes from continuous and dense, at short t c, to discontinuous and porous at long t c, indicating that ZnS formation proceeds in a more complex way than a simple S2-/O2- ion exchange over the treatment time. This feature has significant consequences for the photoelectrochemical performance of these materials when they are used as photoanodes in a typical light-assisted water splitting experiment. A photocurrent (J p) fluctuation of 45% for less than 5 min of operation is observed for the sample prepared with a long sulfidation time while it does not exceed 15% for that obtained with a short one, underlining the importance of the material processing conditions on the preparation of valuable photoanodes.

Porous Zinc Oxide Thin Films: Synthesis Approaches and Applications

Zinc oxide (ZnO) thin films have been widely investigated due to their multifunctional properties, i.e., catalytic, semiconducting and optical. They have found practical use in a wide number of application fields. However, the presence of a compact micro/nanostructure has often limited the resulting material properties. Moreover, with the advent of low-dimensional ZnO nanostructures featuring unique physical and chemical properties, the interest in studying ZnO thin films diminished more and more. Therefore, the possibility to combine at the same time the advantages of thin-film based synthesis technologies together with a high surface area and a porous structure might represent a powerful solution to prepare ZnO thin films with unprecedented physical and chemical characteristics that may find use in novel application fields. Within this scope, this review offers an overview on the most successful synthesis methods that are able to produce ZnO thin films with both framework and textural porosities. Moreover, we discuss the related applications, mainly focused on photocatalytic degradation of dyes, gas sensor fabrication and photoanodes for dye-sensitized solar cells.

Pd–ZnO nanowire arrays as recyclable catalysts for 4-nitrophenol reduction and Suzuki coupling reactions

Hybrid Pd–ZnO nanowire arrays for catalysis: Pd–ZnO@Zn nanowire arrays have been found to be applicable as recyclable catalysts for 4-nitrophenol reduction and Suzuki coupling reactions.

Photoelectrochemical properties of nanocrystalline ZnS discrete versus continuous coating of ZnO nanorods prepared by electrodeposition

The photoelectrochemical properties of nanocrystalline ZnS discrete versus continuous coating of ZnO nanorods prepared by electrodeposition were investigated.

Rapid thermal annealing assisted stability and efficiency enhancement in a sputter deposited CuO photocathode

A stable and efficient CuO based photocathode by tuning the crystallinity and surface morphology of films by rapid thermal treatment.

Surface Activation of Faceted Photocatalyst: When Metal Cocatalyst Determines the Nature of the Facets

Pt nanoparticles with tunable size are prepared on the entire surface of facet-engineered Cu2WS4 decahedral photocatalyst via a kinetic-controlled chemical reduction process. The {101} facets of the photocatalyst which featured photo-oxidation, are successfully activated for photoreduction by Pt. The resulting photocatalyst shows an activity nine times higher compared to that of the only {001}-facets activated catalyst obtained by a conventional in situ photodeposition route.

Low temperature solution processed ZnO/CuO heterojunction photocatalyst for visible light induced photo-degradation of organic pollutants

Morphology controlled hierarchical ZnO/CuO architecture was obtained on both flexible and rigid substrates, which exhibited excellent photocatalytic performance by virtue of favourable heterojunction formation at nanostructure interfaces.

Improved photoactivity of TiO2–Fe2O3 nanocomposites for visible-light water splitting after phosphate bridging and its mechanism

The phosphate bridges built are favorable for charge transfer and separation, leading to a greatly-enhanced photoactivity for water splitting.

Synthesis of Au-decorated V2O5@ZnO heteronanostructures and enhanced plasmonic photocatalytic activity

A ternary plasmonic photocatalyst consisting of Au-decorated V2O5@ZnO heteronanorods was successfully fabricated by an innovative four-step process: thermal evaporation of ZnO powders, CVD of intermediate on ZnO, solution deposition of Au NPs, and final thermal oxidization. SEM, TEM, EDX, XPS, and XRD analyses revealed that the interior cores and exterior shells of the as-prepared heteronanorods were single-crystal wurtzite-type ZnO and polycrystalline orthorhombic V2O5, respectively, with a large quantity of Au NPs inlaid in the V2O5 shell. The optical properties of the ternary photocatalyst were investigated in detail and compared with those of bare ZnO and V2O5@ZnO. UV-vis absorption spectra of ZnO, V2O5@ZnO, and Au-decorated V2O5@ZnO showed gradually enhanced absorption in the visible region. In addition, gradually decreased emission intensity was also observed in the photoluminescence (PL) spectra, revealing enhanced charge separation efficiency. Because of these excellent qualities, the photocatalytic behavior of the ternary photocatalyst was studied in the photodegradation of methylene blue under UV-vis irradiation, which showed an enhanced photodegradation rate nearly 7 times higher than that of bare ZnO and nearly 3 times higher than that of V2O5@ZnO, mainly owing to the enlarged light absorption region, the effective electron-hole separation at the V2O5-ZnO and V2O5-Au interfaces, and strong localization of plasmonic near-field effects.

A plasma-assisted approach for the controlled dispersion of CuO aggregates into β iron(iii) oxide matrices

High-purity supported β-Fe₂O₃/CuO nanosystems with tailored morphology and tuneable copper content were fabricated by a two-step plasma-assisted process.

Hollow/porous nanostructures derived from nanoscale metal-organic frameworks towards high performance anodes for lithium-ion batteries

Lithium-ion batteries (LIBs), owing to their high energy density, light weight, and long cycle life, have shown considerable promise for storage devices. The successful utilization of LIBs depends strongly on the preparation of nanomaterials with outstanding lithium storage properties. Recent progress has demonstrated that hollow/porous nanostructured oxides are very attractive candidates for LIBs anodes due to their high storage capacities. Here, we aim to provide an overview of nanoscale metal-organic frameworks (NMOFs)-templated synthesis of hollow/porous nanostructured oxides and their LIBs applications. By choosing some typical NMOFs as examples, we present a comprehensive summary of synthetic procedures for nanostructured oxides, such as binary, ternary and composite oxides. Hollow/porous structures are readily obtained due to volume loss and release of internally generated gas molecules during the calcination of NMOFs in air. Interestingly, the NMOFs-derived hollow/porous structures possess several special features: pores generated from gas molecules release will connect to each other, which are distinct from "dead pores"; pore size often appears to be <10 nm; in terms of surface chemistry, the pore surface is hydrophobic. These structural features are believed to be the most critical factors that determine LIBs' performance. Indeed, it has been shown that these NMOFs-derived hollow/porous oxides exhibit excellent electrochemical performance as anode materials for LIBs, including high storage capacity, good cycle stability, and so on. For example, a high charge capacity of 1465 mA h g(-1) at a rate of 300 mA g(-1) was observed after 50 cycles for NMOFs-derived Co3O4 porous nanocages, which corresponds to 94.09% of the initial capacity (1557 mA h g(-1)), indicating excellent stability. The capacity of NMOFs-derived Co3O4 is higher than that of other Co3O4 nanostructures obtained by a conventional two-step route, including nanosheets (1450 mA h g(-1) at 50 mA g(-1)), nanobelts (1400 mA h g(-1) at 40 mA g(-1)) and nanoflowers (694 mA h g(-1) at 100 mA g(-1)). The capacity is also better than Co3O4 octahedra obtained by a one-step hydrothermal method (946 mA h g(-1) at 100 mA g(-1)). In this review, we will summarize the recent research advances on NMOFs-derived hollow/porous oxides as LIBs anodes. The enhanced lithium storage properties have been discussed in relation to their special structural parameters. Moreover, remarks on the current challenges and perspectives for future NMOFs applications are proposed. Through this systematic review, we aim to stress the importance of NMOFs templates for the fabrication of hollow/porous functional materials that would result in improved physicochemical properties and provide insights to guide future research for LIBs applications.

CuO/Cu2O composite hollow polyhedrons fabricated from metal-organic framework templates for lithium-ion battery anodes with a long cycling life

Novel CuO/Cu2O hollow polyhedrons with porous shells were fabricated by thermal decomposition of coordination compound [Cu3(btc)2]n (btc = benzene-1,3,5-tricarboxylate) polyhedrons at 350 °C. When tested as anode materials for lithium-ion batteries, these hollow polyhedrons exhibited a reversible lithium storage capacity as high as 740 mA h g(-1) at 100 mA g(-1) after 250 cycles even if the charge-discharge process is stopped for one week during the test time.

Field emission properties of gold nanoparticle-decorated ZnO nanopillars

The structural and optoelectronic properties of ZnO nanopillars (ZnO-NPs) grown on Si substrates by the vapor transport deposition method were investigated. In particular, by varying the deposition duration and hence the morphology of the vertically aligned ZnO-NPs, the resultant field emission characteristics were systematically compared. In addition to identifying the advantageous field emission properties exhibited in the pencil-like ZnO-NPs, we observed that by adhering Au nanoparticles on the surface of the ZnO-NPs the turn-on field and the maximum current density can be drastically improved from 3.15 V/μm and 0.44 mA/cm(2) at 5 V/μm for the best ZnO-NPs to 2.65 V/μm and 2.11 mA/cm(2) at 5 V/μm for Au/ZnO-NPs, respectively. The enhancement of field emission characteristics that resulted from Au-nanoparticle decoration is discussed on the basis of charge-transfer-induced band structure modifications.

Hydrogen Production by Photoreforming of Renewable Substrates

This paper focuses on the application of photocatalysis to hydrogen production from organic substrates. This process, usually called photoreforming, makes use of semiconductors to promote redox reactions, namely, the oxidation of organic molecules and the reduction of H+ to H2. This may be an interesting and fully sustainable way to produce this interesting fuel, provided that materials efficiency becomes sufficient and solar light can be effectively harvested. After a first introduction to the key features of the photoreforming process, the attention will be directed to the needs for materials development correlated to the existing knowledge on reaction mechanisms. Examples are then given on the photoreforming of alcohols, the most studied topic, especially in the case of methanol and carbohydrates. Finally, some examples of more complex but more interesting substrates, such as waste solutions, are proposed.