Non-emissive plastic colour filters for fluorescence detection

Dual imaging technique for a real-time inspection system of foreign object detection in fresh-cut vegetables

Fresh-cut vegetables are a food product susceptible to contamination by foreign materials (FMs). To detect a range of potential FMs in fresh-cut vegetables, a dual imaging technique (fluorescence and color imaging) with a simple and effective image processing algorithm in a user-friendly software interface was developed for a real-time inspection system. The inspection system consisted of feeding and sensing units, including two cameras positioned in parallel, illuminations (white LED and UV light), and a conveyor unit. A camera equipped with a long-pass filter was used to collect fluorescence images. Another camera collected color images of fresh-cut vegetables and FMs. The feeding unit fed FMs mixed with fresh-cut vegetables onto a conveyor belt. Two cameras synchronized programmatically in the software interface simultaneously collected fluorescence and color image samples based on the region of interest as they moved through the conveyor belt. Using simple image processing algorithms, FMs could be detected and depicted in two different image windows. The results demonstrated that the dual imaging technique can effectively detect potential FMs in two types of fresh-cut vegetables (cabbage and green onion), as indicated by the combined fluorescence and color imaging accuracy. The test results showed that the real-time inspection system could detect FMs measuring 0.5 mm in fresh-cut vegetables. The results showed that the combined detection accuracy of FMs in the cabbage (95.77%) sample was superior to that of green onion samples (87.89%). Therefore, the inspection system was more effective at detecting FMs in cabbage samples than in green onion samples.

Organic Light-Emitting Diode Based Fluorescence-Linked Immunosorbent Assay for SARS-CoV-2 Antibody Detection

Immunodiagnostics have been widely used in the detection of disease biomarkers. The conventional immunological tests in central laboratories require expensive equipment and, for non-specialists, the tests are technically demanding and time-consuming, which has prevented their use by the public. Thus, point-of-care tests (POCT), such as lateral flow immunoassays, are being, or have been, developed as more convenient and low-cost methods for immunodiagnostics. However, the sensitivity of such tests is often a concern. Here, a fluorescence-linked immunosorbent assay (FLISA) using organic light-emitting diodes (OLEDs) as excitation light sources was investigated as a way forward for the development of compact and sensitive POCTs. Phycoerythrin (PE) was selected as the fluorescent dye, and OLEDs were designed with different emission spectra. The leakage light of different OLEDs for exciting PE was then investigated to reduce the background noise and improve the sensitivity of the system. Finally, as proof-of-principle that OLED-based technology can be successfully further developed for POCT, antibodies to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in human serum was detected by OLED-FLISA.

A sensitive and compact optical detector based on digital lock-in amplification

We report a sensitive, fixed-wavelength, lock-in-based optical detector built from a light-emitting diode, two colour filters, a photodetector, a small number of discrete analogue components, and a low-cost microcontroller development board. We describe the construction, operating principle, use and performance of the optical detector, which may be used for both absorption and fluorescence measurements in either a 10-mm pathlength cuvette or a low-volume (<100 μl) flow-cell. For illustrative purposes the detector is applied here to a cholesterol assay based on the enzyme-mediated conversion of (non-emissive) Amplex Red into the fluorescent dye resorufin, providing a detection limit of ~ 200 nM - some four orders of magnitude lower than the typical concentration of cholesterol in human serum. (The resorufin molecule itself is detectable down to concentrations of ~ 20 nM). The system may be readily adapted to other biomolecules through a simple change of enzyme.

Prediction of Absorption Spectrum Shifts in Dyes Adsorbed on Titania

Dye adsorption on metal-oxide films often results in small to substantial absorption shifts relative to the solution phase, with undesirable consequences for the performance of dye-sensitized solar cells and optical sensors. While density functional theory is frequently used to model such behaviour, it is too time-consuming for rapid assessment. In this paper, we explore the use of supervised machine learning to predict whether dye adsorption on titania is likely to induce a change in its absorption characteristics. The physicochemical features of each dye were encoded as a numeric vector whose elements are the counts of molecular fragments and topological indices. Various classification models were subsequently trained to predict the type of absorption shift i.e. blue, red or unchanged (|Δλ| ≤ 10 nm). The models were able to predict the nature of the shift with a good likelihood (~80%) of success when applied to unseen data.

Integrated fluorescence detection of labeled biomolecules using a prism-like PDMS microfluidic chip and lateral light excitation

Microfabricated amorphous silicon photodiodes were integrated with prism-like PDMS microfluidics for the detection and quantification of fluorescence signals. The PDMS device was fabricated with optical quality surfaces and beveled sides. A 405 nm laser beam perpendicular to the lateral sides of the microfluidic device excites the fluorophores in the microchannel at an angle of 70° to the normal to the microchannel/photodiode surface. This configuration, which makes use of the total internal reflection of the excitation beam and the isotropy of the fluorescence emission, minimizes the intensity of excitation light that reaches the integrated photodetector. A difference of two orders of magnitude was achieved in the reduction of the detection noise level as compared with a normally incident excitation configuration. A limit-of-detection of 5.6 × 10(10) antibodies per square centimeter was achieved using antibodies labeled with a model organic fluorophore. Furthermore, the results using the lateral excitation scheme are in good proportionality agreement with those by fluorescence quantification using wide-field fluorescence microscopy.