In situ TEM observation of lithium nanoparticle growth and morphological cycling

Advances in Electrochemical Liquid-Phase Transmission Electron Microscopy for Visualizing Rechargeable Battery Reactions

This review presents an overview of the application of electrochemical liquid-phase transmission electron microscopy (ELP-TEM) in visualizing rechargeable battery reactions. The technique provides atomic-scale spatial resolution and real-time temporal resolution, enabling direct observation and analysis of battery materials and processes under realistic working conditions. The review highlights key findings and insights obtained by ELP-TEM on the electrochemical reaction mechanisms and discusses the current limitations and future prospects of ELP-TEM, including improvements in spatial and temporal resolution and the expansion of the scope of materials and systems that can be studied. Furthermore, the review underscores the critical role of ELP-TEM in understanding and optimizing the design and fabrication of high-performance, long-lasting rechargeable batteries.

Unraveling Li growth kinetics in solid electrolytes due to electron beam charging

Revealing the local structure of solid electrolytes (SEs) with electron microscopy is critical for the fundamental understanding of the performance of solid-state batteries (SSBs). However, the intrinsic structural information in the SSB can be misleading if the sample's interactions with the electron beams are not fully understood. In this work, we systematically investigate the effect of electron beams on Al-doped lithium lanthanum zirconium oxide (LLZO) under different imaging conditions. Li metal is observed to grow directly on the clean surface of LLZO. The Li metal growth kinetics and the morphology obtained are found to be heavily influenced by the temperature, accelerating voltage, and electron beam intensity. We prove that the lithium growth is due to the LLZO delithiation activated by a positive charging effect under electron beam emission. Our results deepen the understanding of the electron beam impact on SEs and provide guidance for battery material characterization using electron microscopy.

Enabling Long Cycle Life and High Rate Iron Difluoride Based Lithium Batteries by In Situ Cathode Surface Modification

Metals fluorides (MFs) are potential conversion cathodes to replace commercial intercalation cathodes. However, the application of MFs is impeded by their poor electronic/ionic conductivity and severe decomposition of electrolyte. Here, a composite cathode of FeF₂ and polymer-derived carbon (FeF₂ @PDC) with excellent cycling performance is reported. The composite cathode is composed of nanorod-shaped FeF₂ embedded in PDC matrix with excellent mechanical strength and electronic/ionic conductivity. The FeF₂ @PDC enables a reversible capacity of 500 mAh g^-1 with a record long cycle lifetime of 1900 cycles. Remarkably, the FeF₂ @PDC can be cycled at a record rate of 60 C with a reversible capacity of 107 mAh g^-1 after 500 cycles. Advanced electron microscopy reveals that the in situ formation of stable Fe₃ O₄ layers on the surface of FeF₂ prevents the electrolyte decomposition and leaching of iron (Fe), thus enhancing the cyclability. The results provide a new understanding to FeF₂ electrochemistry, and a strategy to radically improve the electrochemical performance of FeF₂ cathode for lithium-ion battery applications.

Graphene Liquid Cell Electron Microscopy: Progress, Applications, and Perspectives

Graphene liquid cell electron microscopy (GLC-EM), a cutting-edge liquid-phase EM technique, has become a powerful tool to directly visualize wet biological samples and the microstructural dynamics of nanomaterials in liquids. GLC uses graphene sheets with a one carbon atom thickness as a viewing window and a liquid container. As a result, GLC facilitates atomic-scale observation while sustaining intact liquids inside an ultra-high-vacuum transmission electron microscopy chamber. Using GLC-EM, diverse scientific results have been recently reported in the material, colloidal, environmental, and life science fields. Here, the developments of GLC fabrications, such as first-generation veil-type cells, second-generation well-type cells, and third-generation liquid-flowing cells, are summarized. Moreover, recent GLC-EM studies on colloidal nanoparticles, battery electrodes, mineralization, and wet biological samples are also highlighted. Finally, the considerations and future opportunities associated with GLC-EM are discussed to offer broad understanding and insight on atomic-resolution imaging in liquid-state dynamics.

Unravelling the room-temperature atomic structure and growth kinetics of lithium metal

Alkali metals are widely studied in various fields such as medicine and battery. However, limited by the chemical reactivity and electron/ion beam sensitivity, the intrinsic atomic structure of alkali metals and its fundamental properties are difficult to be revealed. Here, a simple and versatile method is proposed to form the alkali metals in situ inside the transmission electron microscope. Taking alkali salts as the starting materials and electron beam as the trigger, alkali metals can be obtained directly. With this method, atomic resolution imaging of lithium and sodium metal is achieved at room temperature, and the growth of alkali metals is visualized at atomic-scale with millisecond temporal resolution. Furthermore, our observations unravel the ambiguities in lithium metal growth on garnet-type solid electrolytes for lithium-metal batteries. Finally, our method enables a direct study of physical contact property of lithium metal as well as its surface passivation oxide layer, which may contribute to better understanding of lithium dendrite and solid electrolyte interphase issues in lithium ion batteries.

Atomic structure of alkali metal is difficult to be revealed at room temperature because of the chemical reactivity and irradiation sensitivity. Here the authors show that electron beam-induced in situ growth of alkali metals enables the investigation of atomic structure and growth kinetics at high spatiotemporal resolution.

S. S, R. A. R, M. A, R. TM, H. BM, G. MV, E. C, J. A, E. L. Laser and electron beam-induced formation of Ag/Cr structures on Ag2CrO4

The interactions of silver chromate with a femtosecond laser and electron beam irradiations were investigated.

In situ analytical techniques for battery interface analysis

Interface is a key to high performance and safe lithium-ion batteries or lithium batteries.

In Situ High-Resolution Transmission Electron Microscopy (TEM) Observation of Sn Nanoparticles on SnO2 Nanotubes Under Lithiation

We trace Sn nanoparticles (NPs) produced from SnO2 nanotubes (NTs) during lithiation initialized by high energy e-beam irradiation. The growth dynamics of Sn NPs is visualized in liquid electrolytes by graphene liquid cell transmission electron microscopy. The observation reveals that Sn NPs grow on the surface of SnO2 NTs via coalescence and the final shape of agglomerated NPs is governed by surface energy of the Sn NPs and the interfacial energy between Sn NPs and SnO2 NTs. Our result will likely benefit more rational material design of the ideal interface for facile ion insertion.

Direct Realization of Complete Conversion and Agglomeration Dynamics of SnO2 Nanoparticles in Liquid Electrolyte

The conversion reaction is important in lithium-ion batteries because it governs the overall battery performance, such as initial Coulombic efficiency, capacity retention, and rate capability. Here, we have demonstrated in situ observation of the complete conversion reaction and agglomeration of nanoparticles (NPs) upon lithiation by using graphene liquid cell transmission electron microscopy. The observation reveals that the Sn NPs are nucleated from the surface of SnO₂, followed by merging with each other. We demonstrate that the agglomeration has a stepwise process, including rotation of a NP, formation of necks, and subsequent merging of individual NPs.

Designing of metallic nanocrystals embedded in non-stoichiometric perovskite nanomaterial and its surface-electronic characteristics

Engineering of novel functional nanocomposite as like as the metallic nanocrystals supported non-stoichiometric perovskite nanomaterial in controlled parameters (size, shape and ratio of chemical characteristics) is a challengeable task. In this context, we present a facile route to fabricate and study its physicochemical property at real time mode in this report. Nanoscale pure Pb crystals surfaced on non-stoichiometric A-site deficient Pb_1-xTiO_3-y nanoparticle were fabricated when a precursor lead titanate (PbTiO₃) nanoparticle was exposed to an electron beam irradiation (EBI) in a transmission electron microscope (TEM) at ambient temperature. In the state of the art, the chemical states and electronic structure of non-irradiated and irradiated PbTiO₃ were studied by X-ray photoelectron spectroscopy (XPS). Electron bombardment resulted in a new visible feature at low binding energy in the Pb 4f core level, while Ti 2p and O 1s line shape showed slight changes. The Fermi level of the corresponding materials was determined to be 1.65 ± 0.1 eV and 2.05 ± 0.1 eV above the valence band maximum, respectively. The normal, weakly p-type PTO exhibits peculiar n-type feature after EBI process (The Fermi level moves near to the conduction band). A feasible mechanism is proposed involving the electron-stimulated local bond-breaking phenomenon in PbTiO₃.

Nanoscale controlled Li-insertion reaction induced by scanning electron-beam irradiation in a Li4Ti5O12 electrode material for lithium-ion batteries

Electron beam of scanning transmission electron microscopy can induce nanoscale-controlled Li-insertion in Li₄Ti₅O₁₂ electrode, which is significant as a new type of electron beam-assisted chemical reactions for local structural and property modifications.

Electron-beam irradiation induced transformation of Cu2(OH)3NO3 nanoflakes into nanocrystalline CuO

The transmission electron microscope electron-beam (TEM e-beam) as a material modification tool has been demonstrated. The material modification is realised in the high-resolution TEM mode (largest condenser aperture, 150 μm, and 200 nm spot size) at a 200 keV beam energy. The Cu2(OH)3NO3 (CHN) nanoflakes used in this study were microwave solution processed that were layered single crystals and radiation sensitive. The single domain CHN flakes disintegrate into a large number of individual CuO crystallites within a 90 s span of time. The sequential bright-field, dark-field, and selected area electron diffraction modes were employed to record the evolved morphology, microstructural changes, and structural transformation that validate CHN modification. High-resolution transmission electron microscopy imaging of e-beam irradiated regions unambiguously supports the growth of CuO nanoparticles (11.8(3.2) nm in diameter). This study demonstrates e-beam irradiation induced CHN depletion, subsequent nucleation and growth of nanocrystalline CuO regions well embedded in the parent burnt porous matrix which can be useful for miniaturized sensing applications. NaBH4 induced room temperature reduction of CHN to elemental Cu and its printability on paper was also demonstrated.

Electron-beam induced synthesis of nanostructures: a review

As the success of nanostructures grows in modern society so does the importance of our ability to control their synthesis in precise manners, often with atomic precision as this can directly affect the final properties of the nanostructures. Hence it is crucial to have both deep insight, ideally with real-time temporal resolution, and precise control during the fabrication of nanomaterials. Transmission electron microscopy offers these attributes potentially providing atomic resolution with near real time temporal resolution. In addition, one can fabricate nanostructures in situ in a TEM. This can be achieved with the use of environmental electron microscopes and/or specialized specimen holders. A rather simpler and rapidly growing approach is to take advantage of the imaging electron beam as a tool for in situ reactions. This is possible because there is a wealth of electron specimen interactions, which, when implemented under controlled conditions, enable different approaches to fabricate nanostructures. Moreover, when using the electron beam to drive reactions no specialized specimen holders or peripheral equipment is required. This review is dedicated to explore the body of work available on electron-beam induced synthesis techniques with in situ capabilities. Particular emphasis is placed on the electron beam-induced synthesis of nanostructures conducted inside a TEM, viz. the e-beam is the sole (or primary) agent triggering and driving the synthesis process.

Derivation of the surface free energy of ZnO and GaN using in situ electron beam hole drilling

Surface free energy, as an intrinsic property, is essential in determining the morphology of materials, but it is extremely difficult to determine experimentally. We report on the derivation of the SE of different facets of ZnO and GaN experimentally from the holes developed using electron beam drilling with transmission electron microscopy. Inverse Wullf's construction is employed to obtain polar maps of the SE of different facets to study different nanomaterials (ZnO and GaN) in different morphologies (nanorod, nanobelt and thin film) to prove its versatility and capability. The results show that the SE of ZnO{10-13} is derived to be 0.99 J m(-2), and the SE of ZnO{10-10} is found to be less than {0002} and {11-20}. A GaN thin film also exhibits a similar trend in the SE of different facets as ZnO and the SE of GaN{10-13} is determined to be 1.36 J m(-2).

In situ fabrication and investigation of nanostructures and nanodevices with a microscope

The widespread availability of nanostructures and nanodevices has placed strict requirements on their comprehensive characterization.

Direct observation of catalytic oxidation of particulate matter using in situ TEM

The ability to observe chemical reactions at the molecular level convincingly demonstrates the physical and chemical phenomena occurring throughout a reaction mechanism. Videos obtained through in situ transmission electron microscopy (TEM) revealed the oxidation of catalytic soot under practical reaction conditions. Carbon oxidation reactions using Ag/SiO2 or Cs2CO3/nepheline catalysts were performed at 330 °C under an O2 flow of 0.5 Pa in the TEM measurement chamber. Ag/SiO2 catalyzed the reaction at the interface of the mobile Ag species and carbon, while the Cs species was fixed on the nepheline surface during the reaction. In the latter case, carbon particles moved, remained attached to the Cs2CO3/nepheline surface, and were consumed at the interface by the oxidation reaction. Using this technique, we were able to visualize such mobile and immobile catalysis according to different mechanisms.

Lithium Electrodeposition Dynamics in Aprotic Electrolyte Observed in Situ via Transmission Electron Microscopy

Electrodeposited metallic lithium is an ideal negative battery electrode, but nonuniform microstructure evolution during cycling leads to degradation and safety issues. A better understanding of the Li plating and stripping processes is needed to enable practical Li-metal batteries. Here we use a custom microfabricated, sealed liquid cell for in situ scanning transmission electron microscopy (STEM) to image the first few cycles of lithium electrodeposition/dissolution in liquid aprotic electrolyte at submicron resolution. Cycling at current densities from 1 to 25 mA/cm(2) leads to variations in grain structure, with higher current densities giving a more needle-like, higher surface area deposit. The effect of the electron beam was explored, and it was found that, even with minimal beam exposure, beam-induced surface film formation could alter the Li microstructure. The electrochemical dissolution was seen to initiate from isolated points on grains rather than uniformly across the Li surface, due to the stabilizing solid electrolyte interphase surface film. We discuss the implications for operando STEM liquid-cell imaging and Li-battery applications.

Insights into the growth of bismuth nanoparticles on 2D structured BiOCl photocatalysts: an in situ TEM investigation

The formation and growth of bismuth nanoparticles onto BiOCl have been directly observed and characterized using a transmission electron microscope.

Anisotropic lithiation onset in silicon nanoparticle anode revealed by in situ graphene liquid cell electron microscopy

Recent real-time analyses have provided invaluable information on the volume expansion of silicon (Si) nanomaterials during their electrochemical reactions with lithium ions and have thus served as useful bases for robust design of high capacity Si anodes in lithium ion batteries (LIBs). In an effort to deepen the understanding on the critical first lithiation of Si, especially in realistic liquid environments, herein, we have engaged in situ graphene liquid cell transmission electron microscopy (GLC-TEM). In this technique, chemical lithiation is stimulated by electron-beam irradiation, while the lithiation process is being monitored by TEM in real time. The real-time analyses informing of the changes in the dimensions and diffraction intensity indicate that the very first lithiation of Si nanoparticle shows anisotropic volume expansion favoring the ⟨110⟩ directions due to the smaller Li diffusion energy barrier at the Si-electrolyte interface along such directions. Once passing this initial volume expansion stage, however, Li diffusion rate becomes isotropic in the inner region of the Si nanoparticle. The current study suggests that the in situ GLC-TEM technique can be a useful tool in understanding battery reactions of various active materials, particularly those whose initial lithiation plays a pivotal role in overall electrochemical performance and structural stability of the active materials.

In situ TEM observation of phase transition of the nanoscopic patterns on baroplastic block copolymer films during nanoindentation

We investigated the in situ phase transition of the nanoscopic patterns on block copolymer thin films during nanoindentation by using a transmission electron microscope (TEM) with a specially designed nanoindenter. For the first time, we observed directly an in situ phase transition from lamellar microdomains to disordered states during the nanoindentation on a baroplastic polystyrene-block-poly(n-pentyl methacrylate) copolymer (PS-b-PnPMA) film. Through the in situ TEM observation, the mechanism of the nanoscopic pattern formation on a block copolymer thin film by indentation is fully understood.