Impact of photosensitizer orientation on the distance dependent photocatalytic activity in zinc phthalocyanine-nanoporous gold hybrid systems

Nanoporous gold powder was functionalized in a two-step approach by an azide terminated alkanethiol self-assembled monolayer (SAM) and a zinc(ii) phthalocyanine (ZnPc) derivative by copper catalyzed azide-alkyne cycloaddition (CuAAC). A series of different hybrid systems with systematic variation of the alkyl chain length on both positions, the alkanethiol SAM and the peripheral substituents of the ZnPc derivative, was prepared and studied in the photooxidation of diphenylisobenzofuran (DPBF). An enhancement by nearly one order of magnitude was observed for the photosensitized singlet oxygen (1O2) generation of the hybrid systems compared to the same amount of ZnPc in solution caused by the interaction of the npAu surface plasmon resonance and the excited state of the immobilized sensitizer. This interaction was shown to be distance dependent, with decreasing activity for short SAMs with alkyl chain lengths < 6 methylene groups caused by quenching of the excited state via electron transfer as well as decreasing activity for SAMs with n > 8 methylene groups due to decreasing energy transfer for long distances. An unexpected distance dependent behaviour was observed for the variation of the peripheral alkyl chain on the photosensitizer revealing a planar orientation of the immobilized photosensitizer on the nanoporous gold surface by a penta-coordinated central zinc ion through interaction with free azide groups from the self-assembled monolayer.

Covalent layer-by-layer films: chemistry, design, and multidisciplinary applications

Covalent layer-by-layer (LbL) assembly is a powerful method used to construct functional ultrathin films that enables nanoscopic structural precision, componential diversity, and flexible design. Compared with conventional LbL films built using multiple noncovalent interactions, LbL films prepared using covalent crosslinking offer the following distinctive characteristics: (i) enhanced film endurance or rigidity; (ii) improved componential diversity when uncharged species or small molecules are stably built into the films by forming covalent bonds; and (iii) increased structural diversity when covalent crosslinking is employed in componential, spacial, or temporal (labile bonds) selective manners. In this review, we document the chemical methods used to build covalent LbL films as well as the film properties and applications achievable using various film design strategies. We expect to translate the achievement in the discipline of chemistry (film-building methods) into readily available techniques for materials engineers and thus provide diverse functional material design protocols to address the energy, biomedical, and environmental challenges faced by the entire scientific community.

A metal-lustrous porphyrin foil

A metal-lustrous self-standing film, named "porphyrin foil", was formed from a glass-forming polymeric porphyrin. The amorphous glass nature of the porphyrin foil played a key role in spontaneously producing a smooth surface. Its sharp contrast in intense absorption and specular reflection of light at each wavelength provided a brilliant metallic lustre.

Porphyrinoid rotaxanes: building a mechanical picket fence

Building on recent progress in the synthesis of functional porphyrins for a range of applications using the Cu-mediated azide-alkyne cycloaddition (CuAAC) reaction, we describe the active template CuAAC synthesis of interlocked triazole functionalised porphyrinoids in excellent yield. By synthesising interlocked analogues of previously studied porphyrin-corrole conjugates, we demonstrate that this approach gives access to rotaxanes in which the detailed electronic properties of the axle component are unchanged but whose steric properties are transformed by the mechanical "picket fence" provided by the threaded rings. Our results suggest that interlocked functionalised porphyrins, readily available using the AT-CuAAC approach, are sterically hindered scaffolds for the development of new catalysts and materials.

Synthesis and Functionalization of Porphyrins through Organometallic Methodologies

This review focuses on the postfunctionalization of porphyrins and related compounds through catalytic and stoichiometric organometallic methodologies. The employment of organometallic reactions has become common in porphyrin synthesis. Palladium-catalyzed cross-coupling reactions are now standard techniques for constructing carbon-carbon bonds in porphyrin synthesis. In addition, iridium- or palladium-catalyzed direct C-H functionalization of porphyrins is emerging as an efficient way to install various substituents onto porphyrins. Furthermore, the copper-mediated Huisgen cycloaddition reaction has become a frequent strategy to incorporate porphyrin units into functional molecules. The use of these organometallic techniques, along with the traditional porphyrin synthesis, now allows chemists to construct a wide range of highly elaborated and complex porphyrin architectures.

Electrochemical Rectification of Redox Mediators Using Porphyrin-Based Molecular Multilayered Films on ITO Electrodes

Electrochemical charge transfer through multilayer thin films of zinc and nickel 5,10,15,20-tetra(4-ethynylphenyl) porphyrin constructed via copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) "click" chemistry was examined. Current rectification toward various outer-sphere redox probes is revealed with increasing numbers of layers, as these films possess insulating properties over the neutral potential range of the porphyrin, then become conductive upon reaching its oxidation potential. Interfacial electron transfer rates of mediator-dye interactions toward [Co(bpy)3](2+), [Co(dmb)3](2+), [Co(NO2-phen)3](2+), [Fe(bpy)3](2+), and ferrocene (Fc), all outer-sphere redox species, were measured by hydrodynamic methods. The ability to modify electroactive films' interfacial electron transfer rates, as well as current rectification toward redox species, has broad applicability in a number of devices, particularly photovoltaics and photogalvanics.

Metal-Organic Coordination Network Thin Film by Surface-Induced Assembly

The growth of metal-organic coordination network thin films on surfaces has been pursued extensively and intensively to manipulate the molecular arrangement. For this study, the oriented multilayer thin films based on porphyrinic nanoarchitecture were synthesized toward metal-organic coordination networks using surface-induced assembly (SIA). Nanoscale molecular thin films were prepared at room temperature using cobalt(II) ion and porphyrin building blocks as precursors. Stepwise growth with a highly uniform layer was characterized using UV-vis, AFM, IR, and XPS studies. The grazing incidence small-angle X-ray scattering and X-ray reflectivity results remarkably suggested a periodic structure in in-plane direction with constant and high mass density (ca. 1.5 g/cm(3)) throughout the multilayer formation. We propose that orientation of the porphyrin macrocycle plane with a hexagonal packed model by single anchoring mode was tilted approximately 60° with respect to the surface substrate. It is noteworthy that the well-organized structure of porphyrin-based macrocyclic framework on the amine-terminated surface substrate can be achieved efficiently using a simple SIA approach under mild synthetic conditions. The synthesized thin film provides a different structure from that obtained using bulk synthesis. This result suggests that the SIA technique can control not only the film thickness but also the structural arrangement on the surface. This report of our research provides insight into the ordered porphyrin-based metal-organic coordination network thin films, which opens up opportunities for exploration of unique thin film materials for diverse applications.

Synthesis, Characterization, and Fluorescence Properties of Mixed Molecular Multilayer Films of BODIPY and Zn(II) Tetraphenylporphyrins

A new azido functionalized 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) has been synthesized to achieve spectral complementarity to a Zn(II) tetraphenylethynyl porphyrin (ZnTPEP). Mixed multilayer films were assembled on glass and quartz up to 10 bilayers thick in a layer-by-layer (LbL) fabrication process using copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) to couple these two dyes together with a tris-azido linker. By varying the amount of BODIPY in the CuAAC reaction solutions for the azido linker layers, we achieve tunable doping of BODIPY within the porphyrin films. We are able to demonstrate linear film growth and determine thickness by X-ray reflectivity (XRR). XRR data indicated that lower BODIPY loading leads to higher porphyrin content and slightly thicker films. Fluorescence emission and excitation spectra of the mixed multilayer films show efficient quenching of the BODIPY singlet and enhanced ZnTPEP emission, suggesting efficient energy transfer (EnT). The ease of fabrication and tunability of these films may serve as potential light harvesting arrays for molecular-based solar cells.

Facile fabrication of ultrathin antibacterial hydrogel films via layer-by-layer “click” chemistry

Ultrathin antibacterial hydrogel films were prepared via layer-by-layer “click” chemistry.

Photocurrent enhancement by multilayered porphyrin sensitizers in a photoelectrochemical cell

Multilayer Zn(II) tetraphenylporphyrin chromophores, assembled using copper-catalyzed azide-alkyne cycloaddition (CuAAC), provide a new sensitization scheme that could be useful in dye-sensitized solar cells (DSSCs). We report on the photoelectrochemical responses of multilayer films of Zn(II) 5,10,15,20-tetra(4-ethynylphenyl)porphyrin (1) assembled on planar ITO substrates operating as a p-type DSSC using three different redox mediators. The traditional I(-)/I3(-) redox couple results in the greatest short circuit current densities (JSC) but very low open circuit potentials (VOC). The use of cobalt sepulchrate ([Co(sep)](2+/3+)) and cobalt tris-bipyridine ([Co(bpy)3](2+/3+)) as redox mediators generates higher VOC values, but at the expense of lower photocurrents. These results highlight the inherent differences in the interactions between the redox mediator and Zn(II) tetraphenylporphyrin multilayer films. Increasing the porphyrin content through multilayer growth proved to be effective in increasing the performance of photoelectrochemical cells with all three redox mediators. Cells using I(-)/I3(-) reached maximum performance (power output) at five porphyrin layers, [Co(bpy)3](2+/3+) at five layers, and [Co(sep)](2+/3+) at three layers. For all mediators, JSC increases with the addition of porphyrin layers beyond a monolayer. However, JSC reaches a maximum value at a point greater than one layer after which it decreases, presumably due to exciton diffusion limitations and the insulating effects of the multilayer film. Similarly, all cells also reach a maximum VOC beyond one porphyrin layer. We show that porphyrin arrays assembled using newly developed CuAAC layer-by-layer growth may be useful as a multilayer sensitization scheme for use in photoelectrochemical cells.