Capacity of Aqueous Solutions of the Ionic Liquid 1-Ethyl-3-methylimidazolium Acetate to Partially Depolymerize Lignin at Ambient Temperature and Pressure

Lignin is a very attractive and abundant biopolymer with the potential to be a biorenewable source of a large number of value-added organic chemicals. The current state-of-the-art methods fail to provide efficient valorization of lignin in this regard without the involvement of harsh conditions and auxiliary substances that compromise the overall sustainability of the proposed processes. Making an original approach from the set of mildest temperature and pressure conditions, this work identifies and explores the capacity of an aqueous solution of the nonvolatile ionic liquid 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) to partially depolymerize technical lignin (Indulin AT) by means of a treatment consisting in the simple contact at ambient temperature and pressure. Among a considerable number of valuable phenolic molecules that were identified in the resulting fluid, vanillin (yield of about 3 g/kg) and guaiacol (yield of about 1 g/kg) were the monophenolic compounds obtained in a higher concentration. The properties of the post-treatment solids recovered remain similar to those of the original lignin, although with a relatively lower abundance of guaiacyl units (in agreement with the generation of guaiacyl-derived phenolic molecules, such as vanillin and guaiacol). The assistance of the treatment with UV irradiation in the presence of nanoparticle catalysts does not lead to an improvement in the yields of phenolic compounds.

Multiscale molecular simulations for the solvation of lignin in ionic liquids

Lignin, the second most abundant biopolymer found in nature, has emerged as a potential source of sustainable fuels, chemicals, and materials. Finding suitable solvents, as well as technologies for efficient and affordable lignin dissolution and depolymerization, are major obstacles in the conversion of lignin to value-added products. Certain ionic liquids (ILs) are capable of dissolving and depolymerizing lignin but designing and developing an effective IL for lignin dissolution remains quite challenging. To address this issue, the COnductor-like Screening MOdel for Real Solvents (COSMO-RS) model was used to screen 5670 ILs by computing logarithmic activity coefficients (ln(γ)) and excess enthalpies (H^E) of lignin, respectively. Based on the COSMO-RS computed thermodynamic properties (ln(γ) and H^E) of lignin, anions such as acetate, methyl carbonate, octanoate, glycinate, alaninate, and lysinate in combination with cations like tetraalkylammonium, tetraalkylphosphonium, and pyridinium are predicted to be suitable solvents for lignin dissolution. The dissolution properties such as interaction energy between anion and cation, viscosity, Hansen solubility parameters, dissociation constants, and Kamlet-Taft parameters of selected ILs were evaluated to assess their propensity for lignin dissolution. Furthermore, molecular dynamics (MD) simulations were performed to understand the structural and dynamic properties of tetrabutylammonium [TBA]⁺-based ILs and lignin mixtures and to shed light on the mechanisms involved in lignin dissolution. MD simulation results suggested [TBA]⁺-based ILs have the potential to dissolve lignin because of their higher contact probability and interaction energies with lignin when compared to cholinium lysinate.

Screening ionic liquids for dissolving hemicellulose by COSMO-RS based on the selective model

The utilization of biomass resources has attracted more and more attention due to the consumption of non-renewable resources. Compared with cellulose and lignin, hemicellulose has been less studied. Some ionic liquids (ILs) have been proved to be excellent solvents for lignocellulosic pretreatment. However, screening of more efficient ILs is difficult due to numerous possible ILs. Computational chemistry has been proved effective in solvent screening, but a precise model is indispensable. In this work, we focused on building several appropriate models and selected the most suitable one. According to the structure of hemicellulose, six hemicellulose models were constructed and the mid-dimer of the xylan chain hemicellulose (MDXC) model was proved to be the best compared with the reported experimental results. Based on the MDXC model, 1368 ILs were screened to evaluate their ability to dissolve hemicellulose by Conductor-like Screening Model for Real Solvents (COSMO-RS). The activity coefficient (γ), excess enthalpy (H^E), and σ-profile indicated that the hydrogen-bond (H-bond) played a vital role in the dissolution of hemicellulose. Anions played a more critical role than cations, where small anions with H-bond acceptor groups could enhance the molecular interactions with hemicellulose. This work provided a thermodynamic understanding of hemicellulose and IL solvent systems. It highlights the importance of building appropriate solute models, which may be necessary to predict of the other thermodynamic properties in the future.

Polymer solubility in ionic liquids: dominated by hydrogen bonding

Polymer solubility in ionic liquids (ILs) cannot be predicted by the solubility parameter approach based on the "like dissolves like" principle. According to the Kamlet-Abraham-Taft (KAT) multi-parameter polarity scale, ILs can be categorized on the basis of hydrogen-bond acidity or basicity ones. The experimental observations, that acidic ILs easily dissolve basic polymers and basic ILs dissolve acidic polymers, reflect the complementary nature of hydrogen-bonding interactions. A quantitative hydrogen-bonding analysis is proposed for predicting the solubility by taking the product of ΔαΔβ as an indicator of the competition between cross-association and self-association hydrogen bonding (H-bonding), where Δα is the difference of acidity parameters between the polymer and IL, and Δβ is the difference of basicity. This solubility criterion has been validated by the solubility data of 19 polymers (11 acidic and 8 basic) in 11 ILs (7 acidic and 4 basic). These principles based on KAT parameters can be applied to other systems dominated by hydrogen bonding.

MoDoop: An Automated Computational Approach for COSMO-RS Prediction of Biopolymer Solubilities in Ionic Liquids

An automated computational framework (MoDoop) was developed to predict the biopolymer solubilities in ionic liquids (ILs) on the basis of conductor-like screening model for real solvents calculations of two thermodynamic properties: logarithmic activity coefficient (ln γ) at infinite dilution and excess enthalpy (H ^E) of mixture. The calculation was based on the optimized two-dimensional structures of biopolymer models and ILs by searching the lowest-energy conformer and optimizing molecular geometry. Three lignin models together with one IL dataset were used to evaluate the prediction ability of the developed method. The evaluation results show that ln γ is a more reliable property to predict lignin solubilities in ILs and the p-coumaryl alcohol model is considered as the best model to represent lignin molecules. The developed MoDoop approach is efficient for rapid in silico screening of suitable ionic liquids to dissolve biopolymers.

Degradation of lignin with aqueous ammonium-based ionic liquid solutions under milder conditions

Ammonium-based ionic liquids can serve as solvents and promoters for lignin depolymerization.

Towards a molecular understanding of cellulose dissolution in ionic liquids: anion/cation effect, synergistic mechanism and physicochemical aspects

This perspective summarizes mechanistic studies on cellulose dissolution in ionic liquids, highlighting the synergistic mechanism, physicochemical aspects and future research trends.

Cellulose is one of the most abundant bio-renewable materials on the earth and its conversion to biofuels provides an appealing way to satisfy the increasing global energy demand. However, before carrying out the process of enzymolysis to glucose or polysaccharides, cellulose needs to be pretreated to overcome its recalcitrance. In recent years, a variety of ionic liquids (ILs) have been found to be effective solvents for cellulose, providing a new, feasible pretreatment strategy. A lot of experimental and computational studies have been carried out to investigate the dissolution mechanism. However, many details are not fully understood, which highlights the necessity to overview the current knowledge of cellulose dissolution and identify the research trend in the future. This perspective summarizes the mechanistic studies and microscopic insights of cellulose dissolution in ILs. Recent investigations of the synergistic effect of cations/anions and the distinctive structural changes of cellulose microfibril in ILs are also reviewed. Besides, understanding the factors controlling the dissolution process, such as the structure of anions/cations, viscosity of ILs, pretreatment temperature, heating rate, etc., has been discussed from a structural and physicochemical viewpoint. At the end, the existing problems are discussed and future prospects are given. We hope this article would be helpful for deeper understanding of the cellulose dissolution process in ILs and the rational design of more efficient and recyclable ILs.

Cellulose-based film modified by succinic anhydride for the controlled release of domperidone

Succinic anhydride (SAD) modified microcrystalline cellulose (MCC) films was prepared and used for the controlled release of the drug domperidone (dom). The morphology and chemical structure of the modified materials were characterized by SEM, FTIR, XRD and TG/DSC techniques. The physical properties, such as water uptake and swelling, light barrier properties, mechanical testing, in vitro degradation behavior, have been investigated. Results showed that the modified cellulose membranes exhibited good anti-UV properties, higher water uptake values, improved mechanical capacity and anti-biodegradability. In addition, the modified MCC films (MS) as the drug carrier indicated the controlled release of domperidone and the release mechanism was proposed using Korsmeyer-Peppas equation at pH 7.4. The developed drug delivery system possessed the profound significance in improving pharmacodynamics and bioavailability of drugs.

Pretreatment of Lignocellulosic Biomass with Ionic Liquids and Ionic Liquid-Based Solvent Systems

Pretreatment is very important for the efficient production of value-added products from lignocellulosic biomass. However, traditional pretreatment methods have several disadvantages, including low efficiency and high pollution. This article gives an overview on the applications of ionic liquids (ILs) and IL-based solvent systems in the pretreatment of lignocellulosic biomass. It is divided into three parts: the first deals with the dissolution of biomass in ILs and IL-based solvent systems; the second focuses on the fractionation of biomass using ILs and IL-based solvent systems as solvents; the third emphasizes the enzymatic saccharification of biomass after pretreatment with ILs and IL-based solvent systems.

Why are some cyano-based ionic liquids better glucose solvents than water?

Among different classes of ionic liquids (ILs), those with cyano-based anions have been of special interest due to their low viscosity and enhanced solvation ability for a large variety of compounds. Experimental results from this work reveal that the solubility of glucose in some of these ionic liquids may be higher than in water - a well-known solvent with enhanced capacity to dissolve mono- and disaccharides. This raises questions on the ability of cyano groups to establish strong hydrogen bonds with carbohydrates and on the optimal number of cyano groups at the IL anion that maximizes the solubility of glucose. In addition to experimental solubility data, these questions are addressed in this study using a combination of density functional theory (DFT) and molecular dynamics (MD) simulations. Through the calculation of the number of hydrogen bonds, coordination numbers, energies of interaction and radial and spatial distribution functions, it was possible to explain the experimental results and to show that the ability to favorably interact with glucose is driven by the polarity of each IL anion, with the optimal anion being dicyanamide.

Recovery of tyrosol from aqueous streams using hydrophobic ionic liquids: a first step towards developing sustainable processes for olive mill wastewater (OMW) management

Hydrophobic ILs have been proposed as VOCs replacements for tyrosol recovery from aqueous solutions, revealing promising extraction efficiency and regeneration capacity. This will help developing sustainable processes for olive mill waste management.

Understanding cellulose dissolution: energetics of interactions of ionic liquids and cellobiose revealed by solution microcalorimetry

In this report, the interactions between fifteen selected ionic liquids (ILs) and cellobiose (CB) are examined by high-precision solution microcalorimetry. The heat of mixing (Δmix H) of CB and ILs, or CB and IL/molecular solvent (MS) solutions, provides the first ever-published measure of the affinity of CB with ILs. Most importantly, we found that there is a very good correlation between the nature of the results found for Δmix H(CB) and the solubility behavior of cellulose. This correlation suggests that Δmix H(CB) offers a good estimate of the enthalpy of dissolution of cellulose even in solvents in which cellulose is insoluble. Therefore, the current findings open up new horizons for unravelling the intricacies of the thermodynamic factors accounting for the spontaneity of cellulose dissolution in ILs or IL/MS solutions.

Anti-degradation gelatin films crosslinked by active ester based on cellulose

An anti-degradation gelatin film crosslinked by an active ester based on MCC was prepared for applications in the food industry, medical engineering, agriculture, etc.

Supporting materials that improve the stability of enzyme membranes

Long-term stability is a key property of enzyme membranes that can be used for biosensors, bioreactors, and bio-fuel cells. This review discusses factors that decrease the stability, and provides two examples of enzyme membranes, a polyion complex membrane and a cellulose membrane, with which stability loss can be avoided. By using these materials, long-term stability was improved. These supporting materials could be applied to construct biosensors, bioreactors, and bio-fuel cells.