An easily synthesizable naphthalene-based sensing platform for Al3+ and Zn2+ ions: theoretical insights and live cells imaging

A new naphthalene-derived Schiff base probe, 1-((2-(diphenylphosphino)ethylimino)methyl)naphthalen-2-ol (HL), has been demonstrated for fluorometric detection of Al3+ and Zn2+ ions. HL was characterized by elemental analysis, FT-IR, NMR, UV-Vis, fluorescence, and ESI-MS analyses. It exhibited high sensitivity and selectivity toward Al3+ and Zn2+ ions in a semi-aqueous medium (CH3CN-H2O; 4 : 1, v/v), remaining unaffected by other competing metal ions. As a 'turn-on' fluorogenic probe, HL displayed strong emission enhancements at 430 nm and 450 nm (λex 300 nm) upon the addition of Al3+ and Zn2+ ions, respectively, with detection limits of 0.62 μM for Al3+ and 0.54 μM for Zn2+. The addition of Al3+ caused ca. 20 nm blue-shift in emission and absorption maxima of HL due to strong complex formation. The calculated binding constant values were found to be 1.39 × 103 M-1 and 4.78 × 103 M-1, respectively, for Al3+ and Zn2+ ions. Job's plot, NMR, ESI-MS, and density functional theory (DFT) studies supported the metal ion binding mechanism with 1 : 1 stoichiometry. Fluorescence imaging experiments further revealed HL's ability to detect intracellular Al3+ in live cells with very low cytotoxicity, highlighting its potential as a selective chemosensory probe.

A fast survey on recent developments in designing colorimetric and fluorescent sensors for the selective detection of essential amino acids

Owing to the biological significance of various amino acids, developing accurate and cost-effective sensing techniques for the selective detection of amino acids has recently attracted growing interest. This review discusses the recent advancements of chemosensors in the selective detection of only essential amino acids out of a total of twenty amino acids, which have been applied in chemosensing research, and the mechanism of their action. The focus is directed towards the detection of the most important essential amino acids, like leucine, threonine, lysine, histidine, tryptophan and methionine, since isoleucine and valine are yet to be explored in regard to chemosensing. According to their chemical and fluorescence properties, different sensing techniques, such as the reaction-based approach, DNA-based sensors, nanoparticle formation, coordination ligand binding, host-guest chemistry, the fluorescence indicator displacement (FID) approach, electrochemical sensors, carbon dot-based sensors, MOF-based sensors and metal-based techniques, have been described.

Design of a Highly Selective Benzimidazole-Based Derivative for Optical and Solid-State Detection of Zinc Ion

A novel series of benzimidazole-based molecules mimicking biological receptors, which exhibit selective coordination with zinc ions, were designed and synthesized. The photochromic behavior of these derivatives with various metal ions suggests a selective interaction of one of the receptors 2-(pyridin-2-yl)-4,7-di(thiophen-2-yl)-3H-benzo[d]imidazole (2c) with zinc ion. The lower limit of detection by photoluminescence quenching was determined to be 16 nM. The mechanism of selective complexation was elucidated by ¹H nuclear magnetic resonance titrations and dynamic light scattering analysis. The stoichiometry of the formation of the Zn(2c)₂ complex was evaluated by single-crystal X-ray diffraction and mass spectral techniques and calculated to be 2:1 (L:M). A change in the electronic energy levels on the sensor analyte interaction was observed by both ultraviolet photoelectron spectroscopy analysis and by density functional theory calculations, suggesting an electroactive semiconductor behavior. A symmetric Schottky structured sensor device was fabricated using the receptor 2c as the active sensing layer. A distinct change in current-voltage characteristics between the receptor and the complex suggests that the fabricated device could be used as a solid-state sensor for detecting zinc ion.

A new 1,2,3-triazole-decorated imino-phenol: selective sensing of Zn2+, Cu2+ and picric acid under different experimental conditions

A new 1,2,3-triazole-based imino-phenol 1 is synthesized. It selectively senses Zn²⁺ in CH₃CN–H₂O with a detection limit of 1.8 × 10⁻⁶ M. Further, the selective sensing of Cu²⁺ and picric acid is achieved by the ensemble 1.Zn²⁺ in CH₃CN–H₂O.

A selective purine-based fluorescent chemosensor for the “naked-eye” detection of zinc ions (Zn2+): applications in live cell imaging and test strips

In this work, a novel purine based probe PTAHN was successfully designed and synthesized. PTAHN displayed high selectivity towards Zn²⁺via turn-on fluorescence. What's more, PTAHN can be proficiently employed for imaging Zn²⁺ in living cells.

A quinoline-based Cu2+ ion complex fluorescence probe for selective detection of inorganic phosphate anion in aqueous solution and its application to living cells

A quinaldine functionalized probe QP has been designed and synthesized. It exhibited selective turn-off fluorescence response toward Cu²⁺ ion over most of the biologically important ions at physiological pH. The binding ratio of the probe QP and Cu²⁺ ion was determined to be 1:1 through fluorescence titration, Job's plot and ESI-MS. The binding constant (K) of Cu²⁺ to probe QP was found to be 2.12×10⁴M^-1. Further, the Cu²⁺ ensemble of probe QP was found to respond H₂PO₄^- and HPO₄^2- among other important biological anions via fluorescence turn-on response at physiological pH. Fluorescence microscopy imaging using living Hela cells showed that probe QP could be used as an effective fluorescent probe for detecting Cu²⁺ cation and H₂PO₄^- and HPO₄^2- anions in living cells.

Highly selective ratiometric fluorescent recognition of histidine by tetraphenylethene–terpyridine–Zn(ii) complexes

Fluorescent detection of histidine is achieved with distinctive color change from yellow to blue by using the Zn(ii) complexes of the terpyridine–tetraphenylethene conjugates.

Imine-functionalized thioether Zn(ii) turn-on fluorescent sensor and its selective sequential logic operations with H2PO4−, DFT computation and live cell imaging

Thioether Schiff base (H₂L), a nontoxic Zn²⁺-sensor (LOD, 0.050 μM) has shown selective ON–OFF emission following INHIBIT logic circuit with H₂PO₄⁻and useful agent for the identification of Zn²⁺and H₂PO₄⁻in intracellular fluid in living cells.

Synthesis and optical properties of aggregation-induced emission (AIE) molecules based on the ESIPT mechanism as pH- and Zn2+-responsive fluorescent sensors

A series salicylaldehyde derives with AIE properties were designed and synthesized, which can be used as potential pH and Zn²⁺ sensing.

Making pyrophosphate visible: the first precipitable and real-time fluorescent sensor for pyrophosphate in aqueous solution

An in situ generated Zn²⁺ complex of di-2-(picoly) amine BINOL–DPA was presented as a precipitable and real-time fluorescent sensor for PPi with a detection limit of 95 nm, and it could be successfully applied in imaging PPi in living cells.

Combining the PeT and ICT mechanisms into one chemosensor for the highly sensitive and selective detection of zinc

A novel fluorescent sensor (ZS1) based on the dual-mechanism of PeT/ICT for the highly sensitive and selective detection of Zn²⁺was designed and synthesized.

A naphthalimide-based fluorescent probe for highly selective detection of histidine in aqueous solution and its application in in vivo imaging

A naphthalimide-based fluorescent probe for selectively detecting His in aqueous solution, living cells, andC. eleganshas been developed.

A new fluorescent and electrochemical Zn2+ ion sensor based on Schiff base derived from benzil and L-tryptophan

Single molecule acting as both fluorescent and electrochemical sensor for Zn(2+) ion is rare. The product (L) obtained on condensation between benzil and L-tryptophan has been characterized by H NMR, ESI-MS and FT-IR spectroscopy. L in 1:1 (v/v) CH3OH:H2O solution shows fluorescence emission in the range 300 nm to 600 nm with λmax at 350 nm when is excited with 295 nm photon. Zn(2+) ion could induce a 10-fold enhancement in fluorescent intensity of L. Fluorescence and UV/Visible spectral data analysis shows that the binding ratio between Zn(2+) ion and L is 1:1 with log β=4.55. Binding of Zn(2+) ion disrupts the photoinduced electron transfer (PET) process in L and causes the fluorescence intensity enhancement. When cyclic voltammogram is recorded for L in 1:1 (v/v) CH3OH:H2O using glassy carbon (GC) electrode, two quasi reversible redox couples at redox potential values -0.630±0.005 V and -1.007±0.005 V are obtained (Ag-AgCl as reference, scan rate 0.1 V s(-1)). Interaction with Zn(2+) ion makes the first redox couple irreversible while the second couple undergoes a 0.089 V positive shift in redox potential. Metal ions - Cd(2+), Cu(2+), Co(2+), Hg(2+), Ag(+), Ni(2+), Fe(2+), Mn(2+), Mg(2+), Ca(2+)and Pb(2+), individually or all together, has no effect on the fluorescent as well as electrochemical property of L. DFT calculations showed that Zn(2+) ion binds to L to form a stable complex. The detection limit for both fluorescence as well as electrochemical detection was 10(-6) M.

High selectivity up-converted fluorescence turn-on probe for Zn2+based on PAMAM hydroxy-naphthalene Schiff-bases (CN) half-organic quantum dots

Dendrimer PNS-G0 realizes an (up-converted) fluorescence turn-on effect to qualitatively and quantitatively detect Zn²⁺based on CN_Zn_O half-organic quantum dots (HOQDs).