Epoxidation of alkenes through oxygen activation over a bifunctional CuO/Al2O3 catalyst

Copper Oxide Nanoparticles over Hierarchical Silica Monoliths for Continuous-Flow Selective Alcoholysis of Styrene Oxide

A simple and reproducible approach for the synthesis of Cu-based heterogeneous catalysts, named flow chemisorption hydrolysis (flow-CH), is reported. The approach, derived from the CH method, allows size-controlled CuO nanoparticles (mean diameter 2.9 nm) to be obtained, that are highly and homogeneously dispersed into hierarchically meso-/macroporous silica monoliths. The Cu-based monolithic catalysts (CuO@SiO2-MN, 8.4 wt.% Cu) were studied in the styrene oxide ring opening reaction at 60 °C in the presence of isopropanol, under continuous flow-through conditions. A remarkable activity with a steady-state conversion of 97% for 13 h and 100% selectivity towards the corresponding β-alkoxyalcohol was observed. The performances of CuO@SiO2-MN were higher than those obtained in batch conditions with the previously reported CuO/SiO2 catalysts and with the ground CuO@SiO2-MN monolith in terms of productivity and selectivity. Moreover, a negligible Cu leaching (<0.6 wt.%) in reaction medium was observed. After 13 h CuO@SiO2-MN catalysts could be regenerated by a mild calcination (220 °C) permitting reuse.

Ternary hybrid CuO-PMA-Ag sub-1 nm nanosheet heterostructures

Multi-component two-dimensional (2D) hybrid sub-1 nm heterostructures could potentially possess many novel properties. Controlling the site-selective distribution of nanoparticles (NPs) at the edge of 2D hybrid nanomaterial substrates is desirable but it remains a great challenge. Herein, we realized for the first time the preparation of ternary hybrid CuO-phosphomolybdic acid-Ag sub-1 nm nanosheet heterostructures (CuO-PMA-Ag THSNHs), where the Ag NPs selectively distributed at the edge of 2D hybrid CuO-PMA sub-1 nm nanosheets (SNSs). And the obtained CuO-PMA-Ag THSNHs as the catalyst exhibited excellent catalytic activity in alkene epoxidation. Furthermore, molecular dynamics (MD) simulations demonstrated that the SNSs interact with Ag NPs to form stable nanoheterostructures. This work would pave the way for the synthesis and broader applications of multi-component 2D hybrid sub-1 nm heterostructures.

Biomimetic Aerobic Epoxidation of Alkenes Catalyzed by Cobalt Porphyrin under Ambient Conditions in the Presence of Sunflower Seeds Oil as a Co-Substrate

In this work, a mild and sustainable catalytic aerobic epoxidation of alkenes catalyzed by cobalt porphyrin was performed in the presence of sunflower seeds oil. Under ambient conditions, the conversion rate of trans-stilbene reached 99%, and selectivity toward epoxide formation was 88%. The kinetic studies showed that the aerobic epoxidation followed the Michaelis-Menten kinetics. Mass spectroscopy and in situ electron spin resonance indicated that linoleic acid was converted to fatty aldehydes via hydroperoxide intermediates. A plausible mechanism of epoxidation of alkenes was accordingly proposed.

Facile synthesis of Ag-CuO/SBA-15 for aerobic epoxidation of olefins with high activity

An efficient 'structure-property' catalyst Ag-CuO/SBA-15 for aerobic epoxidation of olefins was designed and prepared via a simple grinding method, which provided a dynamic assembly driving force to push the precursors into the channels step by step. Partial melting on the precursor particles surface is necessary for synthesizing the Ag-CuO/SBA-15 catalysts. During the thermal grinding process, the partial melting Cu(NO₃)₂ first adhered on AgNO₃ particles surface because the N of AgNO₃ possess stronger interaction with Cu(NO₃)₂ than OH- of SBA-15, then the mixture of melting precursors on AgNO₃ particles surface were sucked into the channels of SBA-15 step by step. Finally, high dispersion of both Ag and CuO nanoparticles were formed in the SBA-15 channels after calcination. The interaction between Ag and CuO, which was characterized by high-resolution transmission electron microscopy, UV-vis and x-ray powder diffraction, enhances the catalytic activity of the catalysts, giving high conversion and selectivity to the epoxides. The reaction mechanism is as follows, the solvent xylene molecule was first oxidized on the Ag surface to form methyl-benzaldehyde (R1), and then moved to the CuO surface to form the peroxidic radical (R2), the peroxidic radical attacked the trans-stilbene C=C bonds on the CuO surface to obtain the epoxides. This synergistic effect shows high activity toward the epoxidation of trans-stilbene.

Wettability Control of Co-SiO2@Ti-Si Core-Shell Catalyst to Enhance the Oxidation Activity with the In Situ Generated Hydroperoxide

With the aim of utilizing O₂ as an oxidant, cascade reaction strategy was usually employed by first transforming O₂ into the in situ generated hydroperoxide and then oxidized the substrate. To combine the two steps more efficiently to get a higher reaction rate, a series of core-shell catalysts with core and shell having different wettabilities were designed. The catalysts were characterized by transmission electron microscopy, UV-vis spectroscopy, Fourier transform infrared, sessile water contact angle, among other methods. These catalysts were applied in the research of the diphenyl sulfide oxidation by the in situ generated hydroperoxide derived from ethylbenzene oxidation. Through control experiments, the hydrophobic modification in the shell and core will influence different steps of the overall cascade reaction. Further insight into the reaction illustrated that the overall reaction rate was not simply an adduct of the promotion effects from the two steps, which was mainly attributed to the inhibition effect for the co-oxidation of ethylbenzene with diphenyl sulfide. Through the guidance of the relationship, a rationally designed core-shell catalyst with appropriate modifying organic groups showed an enhanced performance of the overall cascade reaction. The rational design of the catalysts would provide a reference for other cascade reactions.

Selective and metal-free epoxidation of terminal alkenes by heterogeneous polydioxirane in mild conditions

Polydioxirane (PDOX) was prepared by the treatment of polysalicylaldehyde with Oxone and was found as a selective, highly efficient and heterogeneous reagent for epoxidation of alkenes which can be successfully isolated. This work also introduced a simpler, safer and milder way for epoxidation of alkenes with dioxirane groups than before. PDOX can be simply recovered from the reaction mixture by plain filtration and reused for eight runs without significant reactivity loss.

Dehydrogenative coupling promoted by copper catalysts: a way to optimise and upgrade bio-alcohols

A one-pot one-step transformation of butanol into butyl butanoate takes place with excellent yield on a Cu/ZrO₂ catalyst.

CuO nanostructures of variable shapes as an efficient catalyst for [3 + 2] cycloaddition of azides with terminal alkyne

CuO nanowires exhibited highest catalytic efficiency for the cycloaddition reaction between azide and terminal alkyne, featuring short reaction time, soft reaction conditions and complete regioselectivity.

NiO promoted CuO–NiO/SBA-15 composites as highly active catalysts for epoxidation of olefins

NiO promoted dispersion of CuO in the CuO–NiO/SBA-15 composites, which showed high activity for olefin epoxidation.

An efficient epoxidation of terminal aliphatic alkenes over heterogeneous catalysts: when solvent matters

With a peculiar combination of catalyst/oxidant/solvent, it is possible to obtain good yields and excellent selectivities in the epoxidation of 1-octene.

Solvent-free oxidation of dec-1-ene using gold/graphite catalyst using an in situ generated oxidant

The oxidation of dec-1-ene is investigated under solvent-free conditions using gold nanoparticles supported on graphite and in a batch reactor in the presence of a radical initiator using oxygen from air as the terminal oxidant.