Multifunctional Coordination Polymer Exhibiting Reversible Mechanical Motion Allowing Selective Uptake of Guests and Leading to Enhanced Electrical Conductivity

A remarkably flexible, multifunctional, 2D coordination polymer exhibiting an unprecedented mode of reversible mechanical motion, enabling pores to open and close, is reported. Such multifunctional materials are highly sought after, owing to the potential to exploit coexisting electronic and mechanical functionalities that underpin useful technological applications such as actuators and ultrasensitive detectors. The coordination polymer, of composition Mn(F₄TCNQ)(py)₂ (F₄TCNQ = 2,3,5,6-tetrafluoro-7,7,8,8-tetracycanoquinodimethane; py = pyridine), consists of Mn(II) centers bridged by F₄TCNQ dianions and coordinated by py molecules that extend above and below the 2D network. Exposure of Mn(F₄TCNQ)(py)₂, in its collapsed state, to carbon dioxide results in a pore-opening process at a threshold pressure for a given temperature. In addition to carbon dioxide, a variety of volatile guests may be incorporated into the pores, which are lined with electron-rich F₄TCNQ dianions. The inclusion of electron-deficient guests such as 1,4-benzoquinone, nitrobenzene, maleic anhydride, and iodine into the pores is accompanied by a striking color change associated with a new host-guest charge-transfer interaction and an improvement in the semiconductor behavior, with the iodine adduct showing an increase in conductivity of almost 5 orders of magnitude. Experimental and density functional theory calculations on this remarkable multifunctional material demonstrate a reduction in the optical band gap with increasing electron affinity of the guest.

Simultaneous Spin-Crossover Transition and Conductivity Switching in a Dinuclear Iron(II) Coordination Compound Based on 7,7',8,8'-Tetracyano-p-quinodimethane

The reaction of Fe(OAc)₂ and Hbpypz with neutral TCNQ results in the formation of [Fe₂ (bpypz)₂ (TCNQ)₂ ](TCNQ)₂ (1), in which Hbpypz=3,5-bis(2-pyridyl)pyrazole and TCNQ=7,7',8,8'-tetracyano-p-quinodimethane. Crystal packing of 1 with uncoordinated TCNQ and π-π stacking of bpypz^- ligands produces an extended two-dimensional supramolecular coordination assembly. Temperature dependence of the dc magnetic susceptibility and heat capacity measurements indicate that 1 undergoes an abrupt spin crossover (SCO) with thermal spin transition temperatures of 339 and 337 K for the heating and cooling modes, respectively, resulting in a thermal hysteresis of 2 K. Remarkably, the temperature dependence of dc electrical transport exhibits a transition that coincides with thermal SCO, demonstrating the thermally induced magnetic and electrical bistability of 1, strongly correlating magnetism with electrical conductivity. This outstanding feature leads to thermally induced simultaneous switching of magnetism and electrical conductivity and a magnetoresistance effect.

Anion-Coordination-Assisted Assembly of Supramolecular Charge-Transfer Complexes Based on Tris(urea) Ligands

Charge-transfer (CT) complexes, formed by noncovalent bonding between electron-rich (donor, D) and electron-deficient (acceptor, A) molecules (or moieties) have attracted considerable attention due to their fascinating structures and potential applications. Herein, we demonstrate that anion coordination is a promising strategy to promote CT complex formation between anion-binding, electron-rich tris(urea) donor ligands (D) and electron-deficient viologen cation acceptors (A), which form co-crystals featuring infinite ⋅⋅⋅DADA⋅⋅⋅ or discrete (circular DADA or three-decker DAD) π-stacking interactions. These CT complexes were studied by X-ray diffraction, UV/Vis spectroscopy, electric conductivity measurements, charge displacement curve (CDC) calculations, and DFT computations.

A new fluorone-based bridging ligand for discrete and polymeric assemblies including Mo and W based [4+4] metallocycles

The synthesis of a planar, trianionic, redox-active ligand is described, which is able to bridge metal centres and form [4+4] square anionic metallocycles.

Concomitant Use of Tetrathiafulvalene and 7,7,8,8-Tetracyanoquinodimethane within the Skeletons of Metal-Organic Frameworks: Structures, Magnetism, and Electrochemistry

In search of multifunctional metal-organic frameworks (MOFs), redox-active donors and acceptors, namely, tetrathiafulvalene (TTF) and 7,7,8,8-tetracyanoquinodimethane (TCNQ), were concomitantly used as skeletal components with diamagnetic metal nodes (Cd and Zn) to construct unique framework materials. Six isostructural frameworks were synthesized by diffusion of metal salts, TTF(py)₄, and either paramagnetic Li(TCNQ) or diamagnetic H₂TCNQ. They were characterized by single-crystal X-ray diffraction and FT-IR and UV-vis-NIR spectroscopy, and their physical properties were studied, including two postsynthetic modifications involving crystal-to-crystal transformations following a solid-solution reaction with I₂. The highly colored crystals of two isostructural Zn and Cd frameworks contain undulating Cd-TTF(py)₄ layers entwined with TCNQ in a chicken-wire net as part of the skeleton of the MOF as well as TCNQ intercalated within the channels, while nitrate anions are occluded within the cavities formed by the pyridine moieties. Reaction with I₂ replaces each intercalated TCNQ^•- within the channels with I₃^-. The optical properties and the electron paramagnetic resonance (EPR) spectra indicate the presence of only radical TCNQ^•- in the parent compounds, while the magnetic susceptibilities enabled an estimation of the amount of TCNQ^•- ( S = 1/2) leading to almost paramagnetic behavior. Solid-state electrochemistry provides evidence of several one-electron redox states corresponding to the electroactive cores.

Electrical Conductivity of Copper Hexamers Tuned by their Ground-State Valences

A new design concept has been realized for the construction of molecular conductors, whereby the building unit contains a core reservoir of carriers made up of metal ions with controllable valence states and shelled by flat organic ligands having an extended π-system to promote supramolecular electronic communication. Therefore, reacting the conjugated multidentate ligand 5,5'-pyridyl-3,3'-bi-1 H-pyrazole with different copper salts solvothermally led to three interesting hexameric salts having different ground-state valences, [Cu^II₆(L)₄(NO₃)(CH₃OH)₂](NO₃)₃·4CH₃OH, [(CH₃)₂NH₂][Cu^ICu^II₅(L)₄](SO₄)₂·4H₂O, and [Cu^I₂Cu^II₄(L)₄](NO₃)₂·2CH₃OH. The monovalent Cu^II₆ salt is an insulator, but the mixed-valent Cu^II₅-Cu^I and Cu^II₄-Cu^I₂ salts are semiconductors. Magnetic exchange interactions up to J_NN = -158 cm^-1 dominate the susceptibilities and lead to ground-state spin S_T = 1 (Cu^II₆), 1/2 (Cu^II₅-Cu^I), and 0 (Cu^II₄-Cu^I₂) at 40 K. Cyclic voltammetry shows the stepwise one-electron oxidation-reduction through all the possible valence states. The theoretical calculations of the electronic and band structures of the three compounds substantiate the experimentally observed physical properties.

Effect of Redox "Non-Innocent" Linker on the Catalytic Activity of Copper-Catecholate-Decorated Metal-Organic Frameworks

Two new UiO-68 type of Zr-MOFs featuring redox non-innocent catechol-based linkers of different redox activities have been synthesized through a de novo mixed-linker strategy. Metalation of the MOFs with Cu(II) precursors triggers the reduction of Cu(II) by the phenyl-catechol groups to Cu(I) with the concomitant formation of semiquinone radicals as evidenced by EPR and XPS characterization. The MOF-supported catalysts are selective toward the allylic oxidation of cyclohexene and it is found that the presence of in situ-generated Cu(I) species exhibits enhanced catalytic activity as compared to a similar MOF with Cu(II) metalated naphthalenyl-dihydroxy groups. This work unveils the importance of metal-support redox interactions in the catalytic activity of MOF-supported catalysts which are not easily accessible in traditional metal oxide supports.

X4TCNQ2− dianions: versatile building blocks for supramolecular systems

A new synthetic approach has led to the incorporation of TCNQ and F₄TCNQ dianions into a wide variety of structures.

Conducting Molecular Nanomagnet of DyIII with Partially Charged TCNQ Radicals

Bifunctional electrically conducting single-molecule magnets are highly promising platforms for non-volatile memory devices and quantum computing applications. The development of these molecular materials, however, has largely been hindered by the lack of straightforward synthetic methods. Herein a facile and modular approach is demonstrated for the realization of bifunctional materials that does not require electrochemical or chemical oxidation to obtain partially charged organic radicals. Magnetic and electrical conductivity studies reveal that the Dy^III compound exhibits slow relaxation of the magnetization between 5.0-8.0 K and semiconducting behavior over the range 180-350 K. DC magnetic fields have been found to suppress the quantum tunneling of the magnetization and affect the spin-canted antiferromagnetic interactions.

A cobalt(ii) spin-crossover compound with partially charged TCNQ radicals and an anomalous conducting behavior

The bifunctional salt [Co(terpy)₂](TCNQ)₃·CH₃CN (terpy = 2,2';6',2''-terpyridine, TCNQ = 7,7,8,8-tetracyanoquino-dimethane) exhibits a high room temperature conductivity of 0.13 S cm^-1 and an anomaly in conductivity at ∼190 K as evidenced by variable temperature structural, magnetic and conductivity studies. The anomaly in the conductivity at 190 K has been correlated with the temperature dependent structural breathing and Jahn-Teller distortion of the low spin state of the SCO units, as well as the charge fluctuations and supramolecular π-stacking interactions of partially charged TCNQ radicals. The modular synthetic approach leads to an accessible source of partially charged TCNQ radicals for the facile preparation of bifunctional molecular materials with high electrical conductivity.

Electrochromic switching of monolithic Prussian blue thin film devices

Monolithic, crystalline and highly oriented coordination network compound (CNC) Prussian blue (PB) thin films have been deposited though different routes on conductive substrates. Characterization of the monolithic thin films reveals a long-term stability, even after many redox cycles the crystallinity as well as the high orientation remain intact during the electrochromic switching process.

Magnetic ordering in TCNQ-based metal–organic frameworks with host–guest interactions

Host–guest interactions between the TCNQ-based MOF and aromatic molecules have been found to modulate spontaneous magnetization behavior at low temperatures.

Controlling charge separation in a novel donor–acceptor metal–organic framework via redox modulation

Donor–acceptor charge transfer interactions in a tetrathiafulvalene–naphthalene diimide-based metal–organic framework (MOF) are interrogated using a complementary suite of solid state spectroscopic, electrochemical and spectroelectrochemical methods along with computational calculations.

Coordination Polymers Constructed from TCNQ2– Anions and Chelating Ligands

Coordination polymers containing tetracyanoquinodimethane (TCNQ) in its dianionic form, TCNQ–II, have been formed by combining the acid form of the dianion, TCNQH2, with divalent metal centres in the presence of chelating ligands such as 2,2′-bipyridine (bipy) and 1,10-phenanthroline (phen). When MnII or CdII is employed, two-dimensional (2D) corrugated sheet structures with the formula MII(TCNQ–II)L (M = Mn, Cd; L = bipy, phen) are obtained. In contrast, when CoII is used as the metal centre a complex three-dimensional (3D) structure of composition [CoII(TCNQ–II)(phen)] is formed. Despite the significant differences between the 2D and 3D network structures, the metal coordination geometry and the binding mode of the TCNQ dianion are very similar in all cases.