Descriptor for electro-oxidation of glycerol with high-efficiency bifunctional Cu-Nx single atom catalyst and coupled with hydrogen evolution/carbon dioxide reduction

Electrochemical glycerol oxidation reaction (GOR) presents a promising approach for converting excess glycerol (GLY) into high-value-added products. However, the complex mechanism and the challenge of achieving selectivity for diverse products make GOR difficult to address in both experimental and theoretical studies. In this work, three nitrogen-doped graphene-supported copper single-atom catalysts (CuNx@Gra SACs, x = 2-4) were selected as the model system due to their simple structure, excellent conductivity and high structural stability. Density functional theory (DFT) calculations were employed to gain deeper insight into the catalytic mechanism. The DFT results revealed that both CuN2@Gra and CuN3@Gra follow the same optimal pathway, leading to the formation of formic acid as a key product. The GOR activity and selectivity of CuNx@Gra catalysts follow the trend CuN3@Gra > CuN2@Gra > CuN4@Gra. Subsequent microkinetic analysis, based co on the DFT-derived energetics, confirmed this predicted activity sequence. The GOR activity determined by the limiting potential (UL) is correlate well with changes in the adsorption free energy (ΔGGLY*), the d-band centers of axial dz2 orbitals (εdz2) and integrated crystal orbital Hamilton population (ICOHP). Notably, the simple descriptor ΔGGLY* exhibits a good linear correlation with the free energies of other adsorbates, clarifying the conversion relationships between reaction intermediates and simplifying the understanding of reaction complexity. Moreover, computational results indicate that CuN2@Gra and CuN3@Gra systems can serve as both anode catalysts (for GOR) and cathode catalysts (CO2 reduction for CuN2@Gra and H2 evolution for CuN3@Gra). This study offers insights for designing efficient electrocatalysts, enhancing GLY utilization.

Evaluation of Active Oxygen Species Derived from Water Splitting for Electrocatalytic Organic Oxidation

Active oxygen species (OH*/O*) derived from water electrolysis are essential for the electrooxidation of organic compounds into high-value chemicals, which can determine activity and selectivity, whereas the relationship between them remains unclear. Herein, using glycerol (GLY) electrooxidation as a model reaction, we systematically investigated the relationship between GLY oxidation activity and the formation energy of OH* (ΔGOH*). We first identified that OH* on Au demonstrates the highest activity for GLY electrooxidation among various pure metals, based on experiments and density functional theory, and revealed that ΔGOH* on Au-based alloys is influenced by the metallic composition of OH* coordination sites. Moreover, we observed a linear correlation between the adsorption energy of GLY (Eads) and the d-band center of Au-based alloys. Comprehensive microkinetic analysis further reveals a volcano relationship between GLY oxidation activity, the ΔGOH* and the adsorption free energy of GLY (ΔGads). Notably, Au3Pd and Au3Ag alloys, positioned near the peak of the volcano plot, show excellent activity, attributed to their moderate ΔGOH* and ΔGads, striking a balance that is neither too high nor too low. This research provides theoretical insights into modulating active oxygen species from water electrolysis to enhance organic electrooxidation reactions.

Colloidal synthesis of two-dimensional nanocrystals by the polyol route

The field of 2D nanomaterials is ever-growing with a myriad of synthetic advancements that have been used to obtain such materials. There are top-down, as well as bottom-up, fabrication methods for obtaining 2D nanomaterials; however, synthesis of 2D nanomaterials from solution offers a simple scalable way to control size, shape, and surface. This review outlines the recent advances in colloidal polyol synthesis of 2D nanomaterials and provides perspectives on the similarities and differences in various syntheses. Various materials classes are presented and discussed, including metals, oxides, chalcogenides, and halides, that can be synthesized as 2D nanomaterials via a polyol process. Throughout the literature, polyol media is demonstrated to be versatile not only as a solvent and reducing agent for metal precursors but also as a binding and shape-directing agent for many 2D nanomaterials. Polyols also offer the ability to dissolve various surfactants and additives that can further control the morphology and composition of various nanomaterials. In this review, we outline the various 2D materials that have been realized via the solution polyol route.

A Systematic Search for the Adsorption Motif of All Stereoisomers of Propylene Glycol on a Palladium(111) Surface for Fuel Cell Applications

Small organic molecules have been shown to produce sufficient power densities allowing them to be environmentally friendly renewable fuel sources and an important part of fuel cell research. Affiliated experimental work found propylene glycol, as a source of renewable fuel, produces viable power densities when utilized with an alkaline-acid fuel cell and a Pd(111) catalyst. There is limited theoretical work on propylene glycol's energy reaction pathway. Thus, the first step in understanding how propylene glycol reacts with the Pd(111) slab is understanding its adsorption. In this paper, we present the investigation of adsorption potential energies (APE) of propylene glycol stereoisomers (S)-propane-1,2-diol (1,2PGS), (R)-propane-1,2-diol (1,2PGR), and propane-1,3-diol (1,3PG) on Pd(111). The isomers are systematically scanned through different configurations to analyze the preferred stable orientation and positional motifs. Density functional theory (DFT) is used to optimize the molecular geometries and surface relaxations. The most stable configuration of the 1,2PG stereoisomers resulted in an APE of -0.97 eV. The most stable configuration of the 1,3PG resulted in an APE of -1.19 eV. Both the 1,2PG(S/R) and 1,3PG isomers favor a motif in which at least one hydroxyl oxygen atom interacts with the surface of the Pd(111) catalyst. The 1,2PG carbon backbone prefers to have the center carbon positioned away from the slab, while the 1,3PG prefers to have the center carbon positioned closer to the slab. The most stable 1,3PG differs from other reported 1,3PG and 1,2PG relaxed configurations in that both of the hydroxyl oxygen atoms interact with the Pd(111) surface. These results show more favorable APEs than previously reported calculations. This paper will discuss in detail the differences between the hydroxyl group motifs and their role in affecting adsorption.

Glycerol Is Converted into Energy and Carbonyl Compounds in a 3D-Printed Microfluidic Fuel Cell: In Situ and In Operando Bi-Modified Pt Anodes

The combination of energy and chemical conversion can be achieved by designing glycerol fuel cells. However, the anode must promote the reaction at onset potentials low enough to allow a spontaneous reaction, when coupled to the cathodic reaction, and must be selective. Here, we build a three-dimensional (3D)-printed glycerol microfluidic fuel cell that produces power concomitantly to glycolate and formate at zero bias. The balance between energy and the two carbonyl compounds is tuned by decorating the Pt/C/CP anode in situ (before feeding the cell reactants) or in operando (while feeding the cell with reactants) with Bi. The Bi-modified anodes improve glycerol conversion and output power while decreasing the formation of the carbonyl compounds. The in operando method builds dendrites of rodlike Bi oxides that are inactive for the anodic reaction and cover active sites. The in situ strategy promotes homogeneous Bi decoration, decreasing activation losses, increasing the open-circuit voltage to 1.0 V, and augmenting maximum power density 6.5 times and the glycerol conversion to 72% at 25 °C while producing 0.2 mmoL L^-1 of glycolate and formate (each) at 100 μL min^-1. Such a performance is attributed to the low CO poisoning of the anode, which leads the glycerol electrooxidation toward a more complete reaction, harvesting more electrons at the device. Printing the microfluidic fuel cell takes 23 min and costs ∼US$1.85 and can be used for other coupled reactions since the methods of modification presented here are applied to any existing and assembled systems.

Identification of active catalysts for the acceptorless dehydrogenation of alcohols to carbonyls

Acceptorless dehydrogenation into carbonyls and molecular hydrogen is an attractive strategy to valorize (biobased) alcohols. Using 2-octanol dehydrogenation as benchmark reaction in a continuous reactor, a library of metal-supported catalysts is tested to validate the predictive level of catalytic activity for combined DFT and micro-kinetic modeling. Based on a series of transition metals, scaling relations are determined as a function of two descriptors, i.e. the surface binding energies of atomic carbon and oxygen. Then, a volcano-shape relation based on both descriptors is derived, paving the way to further optimization of active catalysts. Evaluation of 294 diluted alloys but also a series of carbides and nitrides with the volcano map identified 12 promising candidates with potentially improved activity for alcohol dehydrogenation, which provides useful guidance for experimental catalyst design. Further screening identifies β-Mo2N and γ-Mo2N exposing mostly (001) and (100) facets as potential candidates for alcohol dehydrogenation.

An Overview of Glycerol Electrooxidation Mechanisms on Pt, Pd and Au

In the most recent decade, glycerol electrooxidation (GEOR) has attracted extensive research interest for valorization of glycerol: the conversion of glycerol to value-added products. These reactions at platinum, palladium, and gold electrodes have a lot of uncertainty in their reaction mechanisms, which has generated some controversies. This review gathers many reported experimental results, observations and proposed reaction mechanisms in order to draw a full picture of GEOR. A particular focus is the clarification of two propositions: Pd is inferior to Pt in cleaving the C-C bonds of glycerol during the electrooxidation and the massive production of CO₂ at high overpotentials is due to the oxidation of the already-oxidized carboxylate products. It is concluded that the inferior C-C bond cleavability with Pd electrodes, as compared with Pt electrodes, is due to the inefficiency of deprotonation, and the massive generation of CO₂ as well as other C1/C2 side products is partially caused by the consumption of OH^- at the anodes, as a lower pH reduces the amount of carboxylates and favors the C-C bond scission. A reaction mechanism is proposed in this review, in which the generation of side products are directly from glycerol ("competition" between each side product) rather than from the further oxidation of C2/C3 products. Additionally, GEOR results and associated interpretations for Ni electrodes are presented, as well as a brief review on the performances of multi-metallic electrocatalysts (most of which are nanocatalysts) as an introduction to these future research hotpots.

The influence of hydroxy groups on the adsorption of three-carbon alcohols on Ni(111), Pd(111) and Pt(111) surfaces: a density functional theory study within the D3 dispersion correction

Experimentally, steric and inductive effects have been suggested as key parameters in the adsorption and reactivity of alcohols on transition-metal (TM) surfaces, however, our atomistic understanding of the behavior of alcohols in catalysis is far from satisfactory, in particular, due to the role of hydroxy groups in the adsorption properties of C3 alcohols on TM surfaces. In this study, we investigated those effects through ab initio calculations based on density functional theory employing a semilocal exchange-correlation functional within van der Waals corrections (the D3 framework) for the adsorption of C3 alcohols with different numbers and positions of OH groups, namely, propane, 1-propanol, 2-propanol, 1,2-propanediol, 1,3-propanediol and glycerol, on the compact Ni(111), Pd(111) and Pt(111) surfaces. As expected, we found that the adsorption energy is affected by the number of hydroxy groups with similar values for each pair of regioisomers, which clearly indicates the effect of the number of OH groups. Based on Bader charge analysis, we found an effective charge transfer from the C3 molecules to the substrates, which can explain the reduction in the work function due to adsorption. Upon adsorption, the alpha carbon to the OH group closest to the surface and the central carbon are the most positively charged atoms, which increases the lability of their bonded H atoms. In addition, the depletion of electron density between the C-H and O-H bonds closer to the surfaces corroborated their stretching, suggesting that the proximity of the adsorbates to the surfaces affects the acidity of these H atoms, as well as inductive effects within the molecules.

Elucidating Molecular Interactions in Glycerol Adsorption at the Metal-Water Interface with Density Functional Theory

Glycerol is an extremely versatile platform molecule for chemical and fuel production, as evidenced by successful demonstrations in electrochemical and thermochemical processes, where key catalytic chemistries occur at the solid-liquid interface. Despite the remarkable progress made in enriching the first-principles-based computational tool set to reveal and characterize solvent structures in the past decade, techniques for realistic and efficient molecular-level modeling to study aqueous-phase glycerol chemistry are still far from mature. Many aqueous-phase catalytic systems are deemed too complex for routine modeling because of their highly correlated structures at the heterogeneous solid-liquid interface. This invited feature article merges recent developments in quantum mechanical solvation models and oxygenated hydrocarbon conversion chemistry by revisiting the molecular interactions of adsorbed glycerol and its dehydrogenation intermediates at the water-metal interface. Explicit participation of water through the establishment of water-adsorbate, water-water, and water-metal interactions on Pt(111) was investigated using density functional theory. In periodic models, the adsorption favors networklike structures with adsorbates as nodal points linked by coadsorbed water molecules. We also showed that these adsorption patterns actually preserve the original bond-order-based scaling relationship framework established without the consideration of solvent. This behavior can be exploited to improve computational efficiency for future analysis of catalytic polyol conversions in the aqueous-phase environment.

Insights into the roles of water on the aqueous phase reforming of glycerol

Microkinetic modeling using energies from DFT and scaling relations to reveal roles of water in aqueous phase reforming of glycerol.

Controlling reaction pathways of selective C-O bond cleavage of glycerol

The selective hydrodeoxygenation (HDO) reaction is desirable to convert glycerol into various value-added products by breaking different numbers of C-O bonds while maintaining C-C bonds. Here we combine experimental and density functional theory (DFT) results to reveal that the Cu modifier can significantly reduce the oxophilicity of the molybdenum carbide (Mo2C) surface and change the product distribution. The Mo2C surface is active for breaking all C-O bonds to produce propylene. As the Cu coverage increases to 0.5 monolayer (ML), the Cu/Mo2C surface shows activity towards breaking two C-O bonds and forming ally-alcohol and propanal. As the Cu coverage further increases, the Cu/Mo2C surface cleaves one C-O bond to form acetol. DFT calculations reveal that the Mo2C surface, Cu-Mo interface, and Cu surface are distinct sites for the production of propylene, ally-alcohol, and acetol, respectively. This study explores the feasibility of tuning the glycerol HDO selectivity by modifying the surface oxophilicity.

The polyol process: a unique method for easy access to metal nanoparticles with tailored sizes, shapes and compositions

After about three decades of development, the polyol process is now widely recognized and practised as a unique soft chemical method for the preparation of a large variety of nanoparticles which can be used in important technological fields. It offers many advantages: low cost, ease of use and, very importantly, already proven scalability for industrial applications. Among the different classes of inorganic nanoparticles which can be prepared in liquid polyols, metals were the first reported. This review aims to give a comprehensive account of the strategies used to prepare monometallic nanoparticles and multimetallic materials with tailored size and shape. As regards monometallic materials, while the preparation of noble as well as ferromagnetic metals is now clearly established, the scope of the polyol process has been extended to the preparation of more electropositive metals, such as post-transition metals and semi-metals. The potential of this method is also clearly displayed for the preparation of alloys, intermetallics and core-shell nanostructures with a very large diversity of compositions and architectures.

The adsorption of alcohols on strained Pt3Ni(111) substrates: a density functional investigation within the D3 van der Waals correction

In this theoretical study, we address the effect of strain and alloying on the adsorption of methanol, ethanol and glycerol on Pt₃Ni(111) surfaces.

Understanding the Reaction Mechanism of Glycerol Hydrogenolysis over a CuCr2 O4 Catalyst

The reaction mechanism of glycerol hydrogenolysis to 1,2-propanediol over a spinel CuCr₂ O₄ catalyst was investigated by using DFT calculations. Theoretical models were developed from the results of experimental characterization. Adsorption configurations and energetics of the reactant, intermediates, final product, and transition states were calculated on Cu(1 1 1) and CuCr₂ O₄ (1 0 0). Based on our DFT results, we found that the formation of acetol is preferred to that of 3-hydroxypropionaldehyde thermodynamically and kinetically on both surfaces. For glycerol hydrogenolysis to 1,2-propanediol, the CuCr₂ O₄ surface is less exothermic but more kinetically favorable than the Cu surface. The low activation barrier during the reaction on the CuCr₂ O₄ surface is attributed to the unique surface structure; the cubic spinel structure provides a stable adsorption site on which reactants are allowed to be dehydrated and hydrogenated easily with the characteristic adsorption configuration. The role of the Cu and Cr atoms in a CuCr₂ O₄ surface were revealed. The results of reaction tests supported our theoretical calculations.

Different catalytic behaviors of Pd and Pt metals in decalin dehydrogenation to naphthalene

Decalin is more easily dehydrogenated on Pt catalyst than Pd while the dehydrogenation of tetralin is more facile on Pd than Pt.

Differentiation of the C–O and C–C bond scission mechanisms of 1-hexadecanol on Pt(111) and Ru(0001): a first principles analysis

The major product on Pt(111) is hexadecane, whereas it is pentadecane on Ru(0001).

Kinetics study of the Ru/C-catalysed hydrogenolysis of polyols – insight into the interactions with the metal surface

Kinetic analysis of stereoisomerization, decarbonylation and deoxygenation provides insight into the reactivity and dynamics of polyols on Ru-surfaces.

Glycerol adsorption on a defected Pt6/Pt(100) substrate: a density functional theory investigation within the D3 van der Waals correction

We report an ab initio investigation to obtain an improved atomistic understanding of the adsorption properties of glycerol on a defected Pt₆/Pt(100) substrate.

Theoretical Heterogeneous Catalysis: Scaling Relationships and Computational Catalyst Design

Scaling relationships are theoretical constructs that relate the binding energies of a wide variety of catalytic intermediates across a range of catalyst surfaces. Such relationships are ultimately derived from bond order conservation principles that were first introduced several decades ago. Through the growing power of computational surface science and catalysis, these concepts and their applications have recently begun to have a major impact in studies of catalytic reactivity and heterogeneous catalyst design. In this review, the detailed theory behind scaling relationships is discussed, and the existence of these relationships for catalytic materials ranging from pure metal to oxide surfaces, for numerous classes of molecules, and for a variety of catalytic surface structures is described. The use of the relationships to understand and elucidate reactivity trends across wide classes of catalytic surfaces and, in some cases, to predict optimal catalysts for certain chemical reactions, is explored. Finally, the observation that, in spite of the tremendous power of scaling relationships, their very existence places limits on the maximum rates that may be obtained for the catalyst classes in question is discussed, and promising strategies are explored to overcome these limitations to usher in a new era of theory-driven catalyst design.

Towards more accurate prediction of activation energies for polyalcohol dehydrogenation on transition metal catalysts in water

Polyols may be associated to a large catalytic reaction network. Brønsted–Evans–Polanyi (B.E.P.) relationships aim to easily predict activation barriers from reaction energies. Acting as a filter, such methods enable to quickly screen all the potential reaction intermediates and products.

Effect of alumina hydroxylation on glycerol hydrogenolysis to 1,2-propanediol over Cu/Al2O3: combined experiment and DFT investigation

Experimental and theoretical studies were performed to investigate the glycerol hydrogenolysis to 1,2-propanediol (1,2 PD) over Cu/Al₂O₃ and the alumina hydration effect on catalytic activity.

Effect of nickel on catalytic behaviour of bimetallic Cu–Ni catalyst supported on mesoporous alumina for the hydrogenolysis of glycerol to 1,2-propanediol

The nickel supplies the hydrogen via aqueous-phase reforming for the catalytic hydrogenolysis of glycerol.