The structure and self-regeneration performance of Salix psammophila-activated carbon modified by Ag and N co-doped TiO2

In this study, Salix psammophila activated carbon (AC) was modified by immersing it in an AgNO₃ solution and coating it with an N-doped TiO₂ film to improve its self-regeneration performance in visible light. Ag⁺ was adsorbed and reduced to Ag nanoparticles by AC. Ti element only existed as Ti⁴⁺, and N element was incorporated into TiO₂ mainly in the form of interstitial nitrogen. The photodegradation of Ag-N-TiO₂-AC (AC coated with Ag and N co-modified TiO₂) was enhanced under visible light irradiation because of its three inherent structures: (1) Ag and N co-modified TiO₂ had a smaller average crystal size; (2) with a low bandgap (1.59 eV), the photoresponse region of Ag and N co-modified TiO₂ was greatly extended; (3) the lifetime of the photogenerated holes was increased. With the increase in the AgNO₃ dosage, the Ag-N-TiO₂-AC photodegradation increased, while its adsorption decreased. Because of these synergistic effects, 0.05Ag-0.1N-TiO₂-AC (where 0.05 is the dosage of AgNO₃, g) presented the best self-regeneration performance under visible light irradiation.

In this study, Salix psammophila activated carbon (AC) was modified by immersing it in an AgNO₃ solution and coating it with an N-doped TiO₂ film to improve its self-regeneration performance in visible light.

Synthesizing C–N–P-tridoped TiO2 in a Salix psammophila-activated carbon body to enhance its regeneration performance

Loading TiO₂ into an AC body via Salix psammophila pores. C, N, and P atoms were spontaneously doped into TiO₂ lattices. MB removal ratio decreased by 11% after three trials. The synergistic effect of adsorption and photodegradation was enhanced.

A facile approach for photoelectrochemical performance enhancement of CdS QD-sensitized TiO2via decorating {001} facet-exposed nano-polyhedrons onto nanotubes

We designed a novel TiO₂ hybrid structure with enhanced PEC performance that combined a large amount of {001} facets exposed on nano-polyhedrons and nanotubes.

Integration of nickel doping with loading on graphene for enhanced adsorptive and catalytic properties of CdS nanoparticles towards visible light degradation of some antibiotics

Water dispersible, highly efficient nickel doped CdS nanoparticles anchored on graphene nanosheets as a photocatalyst for cephalexin and sulfamethoxazole photodegradation have been prepared in a facile microwave-furnace assisted method. Each one of the two modifications has played a critical role in nanocomposite functioning. Defects originated by dopant boosted the lifetime of carriers and thereupon graphene matrix transferred them to contribute effectively the photocatalytic process. Characterization results revealed the formation of monocrystalline hexagonal phase of all products and that both doping and loading on graphene have red-shifted the absorption edge of CdS towards the visible light region. Furthermore, FTIR confirmed the successful reduction of graphene oxide by the subsequent preparation steps. Adsorption isotherms revealed the role of graphene in enhancing substrate adsorption. Nevertheless, dissimilar pathways of catalytic degradation were observed on the doped composite as cephalexin oxidation was principally mediated by the hole-hydroxyl radical mechanism, sulfamethoxazole oxidation favored the superoxide radical mechanism. This composite has shown, however, a high photostability and minimized ions release of the composite.

Engineered Solution-Liquid-Solid Growth of a "Treelike" 1D/1D TiO2 Nanotube-CdSe Nanowire Heterostructure: Photoelectrochemical Conversion of Broad Spectrum of Solar Energy

This work presents a hitherto unreported approach to assemble a 1D oxide-1D chalcogenide heterostructured photoactive film. As a representative system, bismuth (Bi) catalyzed 1D CdSe nanowires are directly grown on anodized 1D TiO₂ nanotube (T_NT). A combination of the reductive successive-ionic-layer-adsorption-reaction (R-SILAR) and the solution-liquid-solid (S-L-S) approach is implemented to fabricate this heterostructured assembly, reported in this 1D/1D form for the first time. XRD, SEM, HRTEM, and elemental mapping are performed to systematically characterize the deposition of bismuth on T_NT and the growth of CdSe nanowires leading to the evolution of the 1D/1D heterostructure. The resulting "treelike" photoactive architecture demonstrates UV-visible light-driven electron-hole pair generation. The photoelectrochemical results highlight: (i) the formation of a stable n-n heterojunction between TiO₂ nanotube and CdSe nanowire, (ii) an excellent correlation between the absorbance vis-à-vis light conversion efficiency (IPCE), and (iii) a photocurrent density of 3.84 mA/cm². This proof-of-concept features the viability of the approach for designing such complex 1D/1D oxide-chalcogenide heterostructures that can be of interest to photovoltaics, photocatalysis, environmental remediation, and sensing.

Photodegradation of Rhodamine B over a novel photocatalyst of feather keratin decorated CdS under visible light irradiation

Natural polymer feather keratin was employed as a composite material for enhancing the photocatalytic activity of CdS for the degradation of Rhodamine B dye.

Recent advances in heterogeneous photocatalytic decolorization of synthetic dyes

During the process and operation of the dyes, the wastes produced were commonly found to contain organic and inorganic impurities leading to risks in the ecosystem and biodiversity with the resultant impact on the environment. Improper effluent disposal in aqueous ecosystems leads to reduction of sunlight penetration which in turn diminishes photosynthetic activity, resulting in acute toxic effects on the aquatic flora/fauna and dissolved oxygen concentration. Recently, photodegradation of various synthetic dyes has been studied in terms of their absorbance and the reduction of oxygen content by changes in the concentration of the dye. The advantages that make photocatalytic techniques superior to traditional methods are the ability to remove contaminates in the range of ppb, no generation of polycyclic compounds, higher speed, and lower cost. Semiconductor metal oxides, typically TiO₂, ZnO, SnO, NiO, Cu₂O, Fe₃O₄, and also CdS have been utilized as photocatalyst for their nontoxic nature, high photosensitivity, wide band gap and high stability. Various process parameters like photocatalyst dose, pH and initial dye concentrations have been varied and highlighted. Research focused on surface modification of semiconductors and mixed oxide semiconductors by doping them with noble metals (Pt, Pd, Au, and Ag) and organic matter (C, N, Cl, and F) showed enhanced dye degradation compared to corresponding native semiconductors. This paper reviews recent advances in heterogeneous photocatalytic decolorization for the removal of synthetic dyes from water and wastewater. Thus, the main core highlighted in this paper is the critical selection of semiconductors for photocatalysis based on the chemical, physical, and selective nature of the poisoning dyes.

Facile ion-exchange synthesis of urchin-shaped CdS/Bi2S3 heterostructures with enhanced photostability and visible light photocatalytic activity

Core/shell CdS/Bi₂S₃ heterostructures have been synthesized through in situ cation-exchange method. These heterostructures exhibit enhanced photostability and visible light photocatalytic activity.